Superdrive makes noise after Leopard install

Gang,
I am running Leopard now. I just loaded up iTunes and it still gives me this problem. After I insert a CD it beeps once, and
then beeps twice after another 6 seconds, it doesn't sound like it's healthy to me.
It does this with all discs, CD's or DVD's.
What can I do? Please help.

Have you tried resetting the PMU yet? Sometimes if a "12 PowerBook G4 optical drive is having trouble recognizing a CD/DVD resetting the PMU will help. Here's a link to a Apple Knowledge Base Article describing how to reset the PMU: http://docs.info.apple.com/article.html?artnum=14449. If resetting the PMU doesn't help running a cleaning CD may help to clean the optical drive's laser lens. If not the optical drive may be failing. I would recommend buying a replacement drive from www.macsales.com. I would also recommend checking to see if the drive you're buying can be flashed to RPC1 by going to www.thefirmwarepage.com. RPC1 means the drive can play a DVD from any region code in the world. Apple usually ships their drives without flashing them to RPC1 first even if it's possible.

Similar Messages

After Leopard install I have 2 volumes of equal size

After Leopard install I have 2 volumes of equal size. One has Leopard and the other has Tiger. How can I delete, remove, or get rid of the volume with Tiger on it? As I have upgraded to Leopard how can tell which one I have, i.e., 10.5 or 10.5.X?
Thanks for your help.

For some reason the Leopard installer kept your old Tiger partition instead of deleting it. It's probably your fault, but that doesn't matter...
Before you do this, back up any data you still want from the Tiger partition. Also rename it to something that will differentiate it from your other volume(s?). Also back up your Leopard partition before any of this.
Take your Leopard install disk, pop it in, reboot while holding C (or just click Install Leopard), choose a language, then from the menubar click Utilities, then Disk Utility. Once there, click your hard drive (not your Leopard or Tiger volumes) in the sidebar, go to the Partition tab on the right, click your Tiger volume's square (NOT YOUR LEOPARD VOLUME!!!), click the minus sign under that little graph, and click Partition. Then once that's done, drag the little resize line thingy on the bottom-left of your Leopard volume's square so that it fills up the entire area there.
If you can't make the Leopard volume take up the entire drive, you'll have to wipe the entire hard drive and restore from a backup. Yes, you will have to unless you're okay with having less space then you can. (Why can't GParted resize HFS+?!?! WHY?!!?!?!!??!)

Duet makes noise after switching between finder audio and Logic

Hi
My Duet makes noise after switching between "finder audio" and "Logic", In other words i would play a mp3 in the finder and when returning to Logic all my audio sounds like the "lo-fi" RTAS free plug digidesign gives away now.
This is happening on a White *iMac 24"*
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f3
MacOsx 10,5,7

Does this happen every single time? The same thing happens to me every once in a while. I just close Logic and Maestro and unplug the Duet. Then, in this order, plug in the Duet, wait for it to click, load Maestro, load Logic. Works every time.
Edit: It does only seem to happen when I switch from Logic and the audio output from the Duet to internal and then come back quickly. I don't think it's an issue with the Duet hardware itself.
Message was edited by: AecDuck

Kodak 5500 - cannot print after Leopard install

Just want to throw this printer into the list of printers that do not work after Leopard install. I get a raster stream error. I have reinstalled Kodak software; deleted and readded printer, etc, etc,. Still now printing. Scanning works fine though!

Much to my surprise, I received a reply from Kodak a mere few hours after emailing them on Sunday morning. They advised me that a new version of their all-in-one printer software (1.2.0 Release 3) for Leopard will be available on the web on Monday, October 29th.

Fan problem after Leopard install

PowerMac Dual G5 - after Leopard install, fan between hard drive and optical drive revved up like the computer was going to blast off, faster and faster until I powered down by holding down the power button. Leopard seems to be working fine, but with the fan continuing to go at high speed at all times. I've tried reboot, reinstall, pull plug for a few minutes, remove CMOS battery, and zap PRAM, all to no avail. I haven't put the panel cover back on yet, and that may work, but I won't have time to mess with it for a few days and hope for some insight before I try that.Ideas?

Problem went away. Must have been a ghost in the machine.

Hard Drives locked after Leopard Install

Since this only happened after I installed Leopard, I figured here would be a good place. My apologies if it is not.
The root ( /Volumes/Entreri/ and /Volumes/Akira ) are now read only. All folders and files within them have correct permissions.
History: For a long time now, I've promised myself that one day, I was going to wipe my main drive, Ishii, and do OSX RIGHT. Ever since I had initial permissions problems since I upgraded my systems from OS9 to OSX, I ran my system (a Dual 1 Ghz Quicksilver G4) as root. Cringe away. I was young, and my attitude was that my dang computer was not going to tell me what I could, and could not delete (and trust me, after the initial switch and for years beyond, OSX still gave me plenty of those problems).
But I grew older and knew it was time to just run as an admin user, and not root. When Leopard was released, I figured it would be time to wipe my system HD (Ishii) totally clean, install OSX 10.5 and run as a normal user "sean."
Install goes fine. The finder pops up and I start to make what I assume are my first mistakes of my new life as an admin user. I get info on Entreri and Akira, and see their permissions are set to rwrwr-. **** no I say. The Everyone group (for some reason...) needs to have write access!! I change the permissions to rwrwrw and "apply to all enclosed items." It works! "Awesome," I thought, "all my permissions problems have been fixed!" I do that to both my Aux drives.
Then I get info on the system drive, Ryoko, and see the same thing... and I change it, and I hit apply to all enclosed items. About 30 seconds after a little voice in my head nags: "Why would you need to do that? The drive was wiped fresh- every file in there has the permissions OSX set for it.."
But it was in process- and I've learned not to interrupt OSX doing file changes.
As I'm sure you can guess, OSX starts behaving strangely after that. I restart off the Leopard disk, and use the disk utility to Repair Disk Permissions. Due to the number of files I idiotically changed, that takes 4 hours.
Now OSX runs fine.. but my Aux drives, Entreri and Akira, have their root directories locked.
•Getting info on the hard drive makes it look like everything's fine.
•Changing the permissions from rwrwrw to rwrwrw just to try and do something doesn't do anything.
•Applying to enclosed items run, but the root directory is still locked.
•Ignoring ownership on the volume doesn't change the locked root folder.
•FileXaminer can't seem to do anything either.
•Attempting to change the permissions in the terminal results in a Operation not permitted error.
•Permissions as reported from terminal: drwxrwxrwx@ 25 root admin 918 Dec 8 14:15 Entreri
•I ran as root, to see if I could fix the problem, but it's the same thing all over.
•When booting from leopard and running disk utility, the hard drive's are still appearing as locked- nothing is wrong with the drives. I was thinking about reinstalling, but if the installer disk sees the drives as locked, I doubted that would make an issue.
Entreri: 500 GB Seagate Barracuda 7200.9
Akira: 80 GB Seagate Barracuda 7200.6 (4 years old or so)
Ryoko: 80 GB Seagate Barracuda 7200.6
Any help would be appreciated. I fully know I screwed up.

Same here, I have 3 extra internal drives and they now show a lock graphic on the desktop icons. If I try and write any files to the drives I get a prompt stating the drive cannot be modified. I'm given an option to Authenticate with my password, but I then get a message that says I don't have sufficient access privileges. I just updated through Software Update but didn't pay attention to what was being patched. I'm guessing a security update screwed this up. I really need my drives because I use them for media production and I have a serious deadline...come on Apple, test things out before sending updates!

Lost iSight - Ethernet - Bluetooth after Leopard install

Hi,
I installed Leopard - erase and install, in an iMac 1.83, 17 early 2006. After installation seemingly no problems with the installation iSight no longer works, built in ethernet doesn't seem to work and Bluetooth is flaky, sometime bluetooth works sometimes not.
With iSight, try to use Photo Booth and I get a black window with a picture of a camera with a slash through the camera.
With Ethernet using DHCP is self assigned an 169 ... number, so I set it to manuel and assigned a IP to it. But then Airport stopped working and lights on router don't light for the ethernet cable, and yes set to no conflicting IP.
I restarted a few times, installed all the software updates, re-installed Leopard all to no avail.
iMac Passed All ASD test.
Worked fine with Tiger
I'm at a lost so Any ideas welcomed.
TIA, Bill...

Welcome to Apple Discussions, hytan
hytan is giving you good help on resetting the hardware.
About as close as you can come to an iSight "driver" is the "QuickTimeUSBVDCDigitizer.component" file. That file should be in your GF's Mac's Hard Disk / System / Library / QuickTime folder. Look manually because Spotlight will not find this file. If the file is there, reinstallation is not needed.
If it is NOT there, you will need to restore the file to its correct location in order for your built-in iSight (or any other USB camera) to work.
To "reinstall" the file, drag a copy of the file into the correct folder location and restart your Mac. That is all there is to it.
You can use a copy of the QuickTimeUSBVDCDigitizer.component file from another Leopard Mac or from your Time Machine or other backup.
If you do not have a backup or other Mac, make a backup ASAP and use Pacifist to extract QuickTimeUSBVDCDigitizer.component from your Leopard Install disk. Instructions for Pacifist are here.
(I have seen a web page that offers a download of the QuickTimeUSBVDCDigitizer.component file, but it is labeled for Mac OS 10.4.10. I am always suspicious of non-Apple sources for System files on my Mac. Moreover, even if this file is as advertised, I do not know whether the download is a safe substitute for you. Therefore, I suggest the Pacifist alternative.)
If the file is where it should be but your built-in iSight is still not working, you will need to consider the hardware possibilities. If reset won't bring it back, contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Help! External HD data lost after Leopard install!

After a quirky install of Leopard that included an error message for the install DVD itself, it seems that installation has been completed and this was confirmed by Apple CS. This install was on an iMac. Apple said to disregard the error message. It "appears" to have installed, but has been quirky on not shutting down when directed, and also not ejecting disks. No prior problems whatsoever with this machine -- before Leopard yesterday morning.
BUT, the external hard drive (Western Digital 80 GB) that was connected to the iMac comes up empty after the install. That's right, EMPTY! Critical client data gone! The only item on the disk is that dark gray icon with a yellow "exec" in the upper left corner (a Unix Executable File apparently).
Efforts to assess/fix External HD issue:
1. Disk utility reveals an error-free disk with no data (both permissions and disk repair). Same problem-free assessment by disk utility for the newly Leoparded machine, too.
2. Western Digital diagnostic says all ok with disk -- ran on another machine.
3. No data when connected to Leopard MacBook or other iMac running Tiger or other iMac in Windows mode.
4. Phone consult with ESS Data Recovery Specialist -- they think Leopard might have formatted the external. Note that the external didn't show up as an install option.
5. ESS Specialist recommended trying DataRescue by www.prosofteng.com.
My observations related to other related forum topics:
1. This issue appears different as others seem to have had luck plugging their external HDs into other machines with data recovery success.
2. This issue appears different as there is no discernable error with the external HD hardware itself.
3. The external seems to have been formatted by Leopard. Haven't seen anyone talk about this.
PLEASE HELP me figure out next steps:
1. Should I try Data Rescue on the external HD?
2. Is Disk Warrior different from Data Rescue -- better, worse, different? How? I heard DW is not compatible with Leopard but can be used when booting from the DW disk?
3. Should I used a data recovery service? After one of the above (DR/DW)? What is the best service to use in terms of effectiveness and price?
4. For the iMac...
a. Does it make sense to do an archive an install to make sure any issues with the quirky install
of Leopard are cleaned up?
b. I've noticed that I might also try a reboot in safe mode and then run disk utility again, or to
reboot in C.
c. The only 3rd party software on the iMac is flip-4-mac (.wmv compatibility in Quicktime).
Should I delete it?
Thanks for your help. I hope I've laid this out so to be useful to others with similar/dissimilar issues.
Message was edited by: sillynuggins

Hi sillynuggins-
Greetings and welcome to the Apple boards
I have read that you should disconnect all peripherals such as hard drives before doing an update and now I suppose I know one reason why.
1,2 and 3: DataRescue is a different program than DiskWarrior. DR is what you need here. DR will be way cheaper, in orders of magnitude, than a data recovery service.
4. An archive and install does make sense. Definitely remove flip-4-mac beforehand just to make sure.
Luck-
-DaddyPaycheck

Absolutely nothing will mount after leopard install

hey everyone. ive seen that this has been brought up a few times but i dont think ive read an answer to solve the problem.
when i installed leopard on dec.28 nothing since then will mount. no digital camera, no hard drive, no ipod, etc. nothing will mount. i have no idea what to do and would love some idea, so if anyone does have a solution, i would love it. thank you.

I've installed Leopard over 50 times on the same Mac Pro. Each install repeated the same way except one. Re-start got me to the purple screen and nothing would mount. I re-started after a while and everything was back to normal. I had to disconnect the firewire drive I used to make all my Leopard installs. It was a firewire drive which I had low confidence in and was testing it out to see if problems occurred which did.
Was your install similar. A device external attached?

How did my desktop appear on another computer after Leopard install?

I have a Mac G5 connected by ethernet to a cable company. I bought a MacBook for Chicago which is 2,000 miles away. After upgrading my G5 with Leopard I physically took the Leopard CD to Chicago and installed it on my MacBook in Chicago where I have wireless (router) After the install, my desktop was duplicated on this MacBook from the G5 in California. I never had these two computers connected, nor have I ever done a file sharing manipulation between these two computers.
One of the files on the desk top on my MacBook, when opened reveals all my files just like the one in CA except I can't open any of them because the program cannot be found. That is not suprising at all because I never installed any of these programs.
One program did open and can be used however and that is PhotoShop which I use lot on my G5. I never installed that program on my MacBook.
How did this stuff get on my MacBook? I believe there is a bug in the Leopard CD that performs all the functions I could do manually to get this desk top to duplicate.
What do you say?

Lizard33, Welcome to the discussion area!
Do you have a .Mac account? If so you are probably seeing the new Leopard "Back to My Mac" feature in operation.

HP LaserJet 1000 problem after Leopard install

Anyone else have a problem printing after the Leopard install?
My printer and driver was recognized but I can't print. When I watch the print queue it say there are errors and fails.
Since HP never made a driver for this printer, I was using a Zenographics driver that worked great. That is, until I upgraded.
I unplugged the USB and power cords, and removed the printer from System Preferences. After plugging everything back in and adding the printer again, the printer seemed like it wanted to print, but still didn't work.
Please help.

Thank you for your answers. I was hoping someone would reply.
HP LJ 1000 is a great printer and I figured a few people had to have one. It is unfortunate as this printer hardly ever needed the toner changed, and I used it as my main printer. I swear I only changed toner four times in the last five years!
I looked everywhere for a driver and found nothing. HP said they had no updated driver for the Mac (as they told me a year ago, too) and they were not going to create one.
My final solution was to give up my printer to a good neighbor for $50 for her pc.
I researched printers from the Apple store and decided to go with the very Mac friendly HP Laserjet 1022:
http://store.apple.com/AppleStore/WebObjects/EducationIndividualCustom.woa/94340 03/wa/PSLID?mco=CC919B84&fnode=home/shopmac/macaccessories/printers&nplm=TC976LL/A&wosid=gG2dihO9R0Mg29v6f901bEeWNf2
Hopefully it will be a good printer. After returning the new toner I bought for the LJ1000, I thought Staples would have it in stock. However, after trying three different stores, it seems the best way to get a Mac-friendly printer is to go online.
I hope I helped you out as well.
Again, thank you.
-NdP

Superdrive making noise after update

I just updated to the new Mac OS X for my MBP mid-2012. It never made this sound when it booted up. Everytime I boot up the computer, the superdrive makes has a noise that sounds like I inserted a cd. It didn't happen before I upgrade. Do I need to change my settings, is there an upgrade for this upgrade, or did something get screwed up during the upgrade?

Update:
I took my laptop to the nearest Apple store. The person I spoke opened it up and said the fan was a bit dusty and he cleaned it, and it was making less noise. He also said noise from the harddrive at startup was normal.
However, it really is making as much noise as it did before, so I'm skeptical that it's "normal". I suppose the most I can do now is keep diligent backups.

Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

Photoshop CS3 Crashes After Leopard Install

I tried upgrading to Leopard years ago from Tiger but downgraded back because of this same issue. I know I need to upgrade my system so I just installed Leopard again and again the same issue with Photoshop CS3 arises. After the install I am unable to open Photoshop, it just crashes. I imagine someone has to have an answer to this by now. Please help!
Thanks.

As mentioned in all the similar topics in this forum:
http://kb2.adobe.com/cps/834/cpsid_83499.html

Safari crashes on launch after Leopard install

I have just installed Leopard after a fresh install with tiger so that I start with a blank canvas on my Macbook Pro
Safari keeps crashing and giving the following error message:
Process: Safari [531]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: ??? (???)
Build Info: WebBrowser-55231006~1
Code Type: X86 (Native)
Parent Process: launchd [102]
Date/Time: 2008-01-25 00:58:28.401 +0000
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
Referenced from: /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
Reason: image not found
Model: MacBookPro1,1, BootROM MBP11.0055.B08, 2 processors, Intel Core Duo, 1.83 GHz, 512 MB
Graphics: kHW_ATIr520Item, ATY,RadeonX1600, spdisplayspciedevice, 128 MB
Memory Module: BANK 1/DIMM1, 512 MB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), 1.2.2
Bluetooth: Version 2.0.0f20, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK8032GSX, 74.53 GB
Parallel ATA Device: MATSHITADVD-R UJ-857
USB Device: Built-in iSight, Micron, high_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., full_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA

Hi Neill
Library not loaded: /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
Per the above, your computer is missing a critical OS X file. Do you have another machine with OS X Leopard installed? If you do, I'll give instructions for copying that file from one machine to another.
If not:
If you have another browser installed, such as Firefox, download and run the 10.5.1 Update. If you don't have access to another browser, I suggest you pay a visit to an Apple Store or a certified Apple Tech location to assist you with these suggestions.
After the Install/restart of the Update, "repair permissions" etc. Do not use the computer while the update is running. Restart Safari. (you might get lucky if the update adds the file to your system).
If no go, then I suggest reinstalling the OS using the Archive and Install method.
Post back

Superdrive makes noise after Leopard install

Similar Messages

Maybe you are looking for