SuperDuper and Aperture 3?
A tale of two upgrades. One on my big iron quad core Mac Pro, 3 ghz Intel Zeon processors; one on my 2008 2.53ghz MacBook Pro; both with 4 gig RAM. Migrated database, NOT the images (to save time and heartache). Ran consistency check both times. Same library, essentially -- about 225 gigs on each machine. And what happens?
Big Iron: a world of hurt. Beachballs, freezes, crashes, slow as a pig, grinding harddrive sounds for hours on end. Library is fine, but touch the images and lookout!
Also a missing "tick" for the 32bit option, so no way to try that. Application on boot drive, 225gig library on second terrabyte drive.
Laptop: Smooth as silk. No beachballs, freezes, crashes. Greased lightning, even doing adjustments, even using brushes and curves. No missing "tick" for 32bit option. 225gig library on external 500 gig drive.
Both upgrades were done using the Retail boxed DVD.
And, the laptop is essentially a clone of the big machine. The only difference between them?
Super Duper.
Is it possible SuperDuper is the problem? Anyone else in a world of hurt who also has SuperDuper installed? I know it's a long shot but hey stranger things have happened!
I have SuperDuper and Aperture 3 on a Mac Pro 2.8 Quad-Core 6GB ram and Nividia 8800 GT graphics. I have not had a problem. My Library is smaller than yours (about 7,000 images) and most of my images are referenced so my Aperture Library is only about 15GB. I've even had SuperDuper and Aperture 3 running at the same time with out a problem. It's very unlikely that SuperDuper could effect Aperture.
I did the following prior to conversion. First I made sure I had a Time Machine backup and a SuperDuper backup of my Photo volume. Using Aperture 2 I deleted all previews and then rebuilt them. I rebuilt the Aperture 2 data base and then did a consistency check. Next using the Finder I copied the Aperture 2 library to another volume but left all the referenced files in place. Finally I started Aperture 3 and pointed it at the copied library. The conversion took a few hours and everything has been good. After a day I renamed the original Aperture 2 library and using the finder copied the Aperture 3 library back to where I wanted it.
It's all running great.
Similar Messages
-
Print quality difference between iphoto and aperture...?
when ordering books, is there a print quality difference between using iPhoto and Aperture? or are they sent to the same lab?
it's possible i may have some setting wrong, but when i order a book using iphoto, i never really feel the quality is that great. it's good, i just feel it could be a lot better. the print quality sort of reminds me of newsprint, albeit high quality newsprint. similar sized prints made at home on my basic 3-in-1 printer look better.
thanks...Previews are what you view on your display. When you import a photo into Aperture (and I'm pretty sure iPhoto as well), your computer automatically generates a preview for quick viewing. The original images are stored in your library, but it is the preview that you see.
In Aperture, you are able to set the size and quality of these previews. When sharing photos between Aperture and iPhoto, the process is as follows:
Let's say that your images are stored in Aperture, but you also want to be able to view them in iPhoto without taking up too much room on your hard drive. Essentially, if you were to import the originals into iPhoto as well, you would be storing two exact, yet separate copies of the same image on your hard drive. As you are aware, with large images (whether JPEG's, and especially RAW) this would put quite a tax on your storage capacity after not too long.
So, you have your images in one or the other (in this case Aperture), but you want to play around with them in iPhoto. What you can do, is open iPhoto, go to the File menu and then select, Show Aperture Library. This will open a window with all of the contents of your Aperture Library. You can then drag any images you want into iPhoto . The only thing is, you are not dragging the original JPEG's, but rather, the previews of those images. If you have those previews set to a lower quality (again for capacity concerns), you will only have lower quality and lower detailed images in iPhoto. These images might not be ideal, or even suitable for printing high quality prints. The previews that you generate in Aperture though can be adjusted to be extremely high quality with no size limits.
My thinking was that since you mentioned Aperture, it sounded like you had experience with working with it and with ordering a photo book through Aperture. I guess you were saying that you ordered via iPhoto, weren't happy with the quality and were wondering if Aperture created books were better.
Anyway, if this is the case, I cannot answer that for you. I have never ordered a book through Aperture. If the quality of your images is good, you should be able to get a decent product no matter where you order it from. There is not doubt that the materials used and the print shop that does the work makes a difference, but if your images are good, you should still get a decent product through iPhoto. Perhaps iPhoto isn't the way to go though if you have had poor experiences with them.
If you haven't used Aperture yet, I would highly recommend it though aside from the photo book aspect of this thread. It is a stellar product.
I hope this helps.
Message was edited by: macorin -
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?
If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.
-
IPhone - how to sync with iPhoto and Aperture at the same time ???
I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture. -
Can Superduper and Time machine write to the same external volume.
I just setup a 750 GB external drive single partition using firewire 800. Any problem with superduper and time machine writing to the same volume?
RonCan Superduper and Time machine write to the same external volume.
Yes, they can write to the same partition.
I am doing this, and can report no problems so far. TM still backs up and SuperDuper is bootable. -
How to remove duplicates in iphoto 7.1.5 and aperture 2.1.4 on same hard drive
How to remove duplicates from iPhoto 7.1.5 and Aperture 2.1.4 on same hard drive?
For iPhoto duplicate annihalitor is a good solution
For Aperture it is best to ask in the aperture forum
LN -
Hey there, Apple Support Communities.
To start, I'm working on a MBP Retina 15" with a 2.3GHz i7 processor and 16 GB of RAM. 10GB free on a 256GB SS HD. Attached are two external HDs - one 1TB Western Digital portable drive from 2011, one 2TB Porsche LaCie non-portable drive from 2013; both connected via USB. All photo libraries in question are on the external drives.
I have Aperture 3.5.1 and iPhoto 9.5.1. I prefer to work in Aperture.
The Issue(s)
Over the years, I have accumulated a number of iPhoto libraries and Aperture libraries. At one point, I thought my WD drive was dying so I purchased the LaCie and copied all libraries over the the LaCie drive. (Turns out, there's probably an issue with my USB port reading drives, because I can once again see the WD drive and occasionally I can't see the LaCie drive.)
So now I have old version of some libraries on the WD drive, and new versions on the LaCie drive.
When I was moving things, I ran the software Gemini to de-dupe my iPhoto libraries. Not sure what effect that may have had on my issues.
In my main Aperture library and in some iPhoto libraries, I get the image-not-found badge or exclamation point. I've dug through the hidden Masters folders in various libraries to find the original image. In some cases, I have been able to find the original image, sometimes in a different version of the iPhoto library.
My Question(s)
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
2. For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
3. Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
TL;DR: Too many iPhoto and Aperture libraries, and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
Thank you! Let me know if you need add'l info to offer advice.
With appreciation,
ChristieThat will not be an easy task, Christie.
I am afraid, your cleaning session with Gemini may have actually removed originals. I have never used this duplicate finder tool, but other posters here reported problems. Gemini seems to replace duplicate original files in photo libraries by links, and this way, deleting images can cause the references for other images to break. And Aperture does not follow symbolic links - at least, I could never get it to find original files this way, when I experimented with this.
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
You have to find the originals yourself. If you can find them or restore them from a backup, Aperture can reconnect them. The reconnect panel can show you, where the originals are supposed to be, so youcan see the filename and make a Spotlight search.
For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
Make a copy of the missing original you found in a folder outside the iPhoto library. You can either open the iPhoto library in Aperture and use "File > Locate Referenced file" to reconnect the originals, or simply reimport them. Then Lift&Stamp all adjustments and metadata to the reimported version.
See this manual page on how to reconnect originals: Aperture 3 User Manual: Working with Referenced Images (the paragraph: Reconnecting Missing or Offline Referenced Images)
Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
References images will stay referenced, managed will remain managed. You need to unhide all hidden photos in iPhoto - this cannot be done in Aperture.
and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
That is probably due to Gemini's replacing duplicate originals by links, and your best cause of action is to fix this before merging the libraries. Reconnecting can be done for your iPhoto libraries in Aperture. -
External disk for Time Machine and Aperture Vaults
I'm planning on buying an external HD for backups with Time Machine and I will also be using it for Vaults in Aperture.
Should I partition the disk into two volumes, one for each, or will TM and Aperture co-exist quite happily on the same volume?
I'd rather use a single volume as, in my experience, partitioning a disk always results in one volume filling up long before the other, however integrity of the backups is the most important requirement.I strongly agree with V.K.
The other big reason to partition is, as you say, one volume will fill up before the other.
That's exactly how TM is designed to work -- fill up whatever space you allocate to it. Unlike traditional archive-type backup systems, it manages it's space and deletes backups automatically. As you probably know, it keeps it's hourly backups for 24 hours, then deletes them, except the first of the day, which becomes a daily backup and is kept for a month. Similarly, after a month, one of those daily backups becomes a weekly, and the others are deleted. But the weeklies are kept as long as there's room. Unless something goes wrong, you never have to do a thing.
So, if you have other data in that same partition, TM will, eventually, fill up the remaining space, limiting the space available to Aperture. -
I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!
Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again. -
Best Practice for Installation of Both Leopard and Aperture 2 upgrade.
I've finally bought the bullet and purchased both Leopard and Aperture 2.0 upgrade. I've tried searching for a best practice to install both, but haven't been able to find one--only trouble shooting type stuff. Any suggestions, things to avoid, etc would be greatly appreciated. Even a gentle shove to a prior thread would be helpful. . . .
Thanks for pointing me in the right direction.
Stevesteve hutchcraft wrote:
I've tried searching for a best practice to install...
• First be really sure that all your apps work well with 10.5.3 before you leave 10.4.11, which is extraordinarily stable.
• Immediately prior to and immediately after every installation of any kind (OS, apps, drivers, etc.) got to Utilities/Disk Utility/First Aid, and Repair Permissions. Repairing Permissions is not a problem fixer per se, but anecdotally many folks with heavy graphics installations (including me) who follow that protocol seem to maintain better operating environments under the challenge of heavy graphics than folks who do not diligently do so.
• When you upgrade the OS do a "clean install."
• RAM is relatively inexpensive and 2 GB RAM is limiting. I recommend adding 4x2 GB RAM. One good source is OWC: http://www.owcomputing.com/.
• After you do your installations check for updates to the OS and/or Aperture, and perform any upgrades. Remember to Repair Permissions immediately prior to and immediately after the upgrade installations.
• If you are looking for further Aperture performance improvement, consider the Radeon HD 3870. Reviews at http://www.barefeats.com/harper16.html and at http://www.barefeats.com/harper17.html.
Good luck!
-Allen Wicks -
i cannot change editing location from aperture to photoshop in iphoto. i followed directions to advanced tab in iphoto and have 2 choices for editing photos-iphoto and aperture. any suggestions on how to change the sites? thanks.
Not sure why you would have Aperture there as it's not an editor.
To change, just select Aperture again, and this will give you the dialogue to change the choice.
Regards
TD -
I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro. It will be used mainly for iPhoto and Aperture. TF
Pair a wireless KB with the laptop and all should be well when you attach the laptop to the iMac and invoke TDM. But as Denny mentions, it does seem like the waste of a good iMac to use it in just this configuration. Why is the laptop primary?
-
Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?
Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?
Sound like a trackpad problem and not an iPhoto one. Have you asked in the forum dedicated to the Mac model you're using or is this an add on trackpad?
OT -
No pics appear in iphoto and aperture sidebar since iLife 11
With the update of iLife11 the pics disappeared from the sidebar under iPhoto and Aperture.
While the sidebar for Audio, Movies and Widgets runs well, only the running upload icon appears beside of iPhoto and Aperture.
Why does iWeb not find the pics?!
How to help iWeb to get access to the photo libraries?
Cheers,
ThomasSince it works OK in your wife's account it could be a preference file that is causing the problem in your account. Here's how to determine if that's the problem:
Trouble Shooting Preferences in Leopard/Snow Leopard
1 - close all applications.
2 - open your Library folder, Home/Library, and drag the Preferences folder to the Desktop. A new Preference folder will be immediately created in the Library.
3 - run the application again and determine if the problems is fixed.
4 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button.
Click to view full size
5 - If the problem is NOT fixed, drag the Preferencess folder on the Desktop into the Library to replace the new one that was created.
Maybe you are looking for
-
Connecting to TV or other Video/Audio Devices
Hi, I am rather new to the Media/Technology scene in terms of inter-operability of the hardware. So, if you could please just help me out with a few NEWBIE questions. 1.) Why do my new speakers only out put sound when I plug in the input cable to the
-
How do you add a gift certificate to your account?
How do you add a gift certificate to your account? AJBG
-
Problem in Flat file transaction data loading to BI7
Hi Experts, I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold. Flat file fields ar
-
I just updated iWork and now Pages won't work I cannot get a curser or type anything.
I
-
Creating a restricted key figure in BI7 reporting
Hi I am creating a restricted key figure globally in BI7 query designer, whenever I try to restrict Calender Year /Month, an error message pops up showing: Runtime error '457' (This key is already associated with an element of this collection), when