SuperDuper kills only Crucial M4 SSDs or all the brands?

Today I have bought a Crucial M4 SSD 2,5 512GB to replace my MacBook Pro HD. I connect it with usb to sata cable to my Mac, format it and begin copying the data using SuperDuper. 5 minuts later I get an error, the drive is ejected and from that moment it has been impossible to mount, erase or repair.
Disk Utility shows the drive with the partition name blurred. If I click mount I get the "run first aid" dialog. First aid says the drive seems OK. If I try to format it another error and DiskWarrior reports a hardware failure. Searching the discussions I find it seems SuperDuper damages the lookup table or something similar. As it was not exactly my idea of quality paying as I paid 1 euro per Gyg, I have returned the SSD and got a refund. The question now is: are all the SSD drives so fragile or partially incompatible or there's one that I can use just exactly like a mechanical hard drive???

Just to clarify the subject: SuperDuper KILLS NOTHING. I bought a second identical Crucial M4 512GB and I got same identical behaviour: ten minutes installing MacOS from DVD then death, unrecoverable, not recognized as a hard drive nor nothing attached to the usb bus...
I needed a PC to revive the drive and to upgrade the firmware. After that it works like a charm, first in an external drive for testing and now inside my 2008 MacBook Pro.
So if you are looking for an ssd drive and googling you end reading this, first of all UPGRADE THE SSD FIRMWARE, and then don't forget to enable TRIM using one of the Trimenabler apps you can get on the internet.
Hope this helps somebody.

Similar Messages

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!

How come the latest version of firefox (4.0) lost the feature of saving the bookmarks whenever I exit the browser? Now the only option is actually closing all the bookmarks and manually opening them again.

With previous versions of Firefox, I was always asked this question whenever I exit the web browser and turning my laptop off: Do you want to save your bookmarks?... At least that was the message of the question. Right now, my only option is actually closing all the bookmarks and manually opening each one of them or starting from a saved bookmark list.
Thanks!

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

How can I install only OS on SSD and have the HDD only for apps?

I am looking to buy an SSD and install it in my CD area of the macbook pro with an adapter. But I wanted to know if it's possible to instal only my OS on the SSD and have the HDD only for Apps/Software....Is this possible and if so how can I do this?

I suppose you could do this by just installing Mountain Lion onto your SSD, and then move your applications folder and documents to the HDD.
But I would be wary of doing this because:
It seems like it would defeat the purpose of having a SSD, that is to make your computer fast. The computer would have to switch back and forth between the SSD and the HDD. Sounds like that would unnecessarily complicate things.
I like to keep things simple. I think the software engineers at Apple know what they are doing and I just keep things installed simply and the way they intend them. Then they seem to work. I put a SSD in my laptop about a year ago and it works perfectly. I haven't had a problem with my computer in a very, very long time.
This doesn't mean that you can't have a lot of files stored on a secondary drive somewhere, whether it is on an internal or external drive. But I'd keep the system software and apps where they belong, on the drive where the installer puts them.
And this doesn't mean that you can't try your plan and see how it works.

Since installing ios7 I cannot find the setting I used in ios6 that set my e-mails to only show a specified amount all the time . I really loved that ? Where can I do that or is it gone forever?????

Since installing the new ios7 on my iPhone 5 I cannot set my email to only show a certain amount of emails ? Did we loose that ability or do I not know where to find it . It use to be in settings of e-mail . I really really mis this feature ? Please let me know if we can still do that somehow?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

Hello if i click on a picture it wont open i can only open it by playing all the picture

if i click on a picture it wont open it can sombody help me? thanks

thank you verry much for your help!
i think i have a problem whit my mousse because i have to click many times and then de map with pictures open.
but taping the spacebar is verry helpfull. have to click many times to open the map with fotos en then i can tap the spacebar to see the picture.
its only with the foto's that my mousse dont work so good for the rest i dont have problems.
i have to click only one time and everthing works.
thanks again

How do I enable links to only open and not download all the time?

I find in the Firefox browser that when I click on a link to view, listen, or watch the file automatically gets downloaded to my computer. I have gone into the preferences to disable this to view instead of save and this still continues. In other browsers I am able to simply view or listen such as in Safari. How can I disable this from automatically downloading?

Hi eusib43, Sorry you are having problems.
The redirection blocking feature is really intended to help users that need to use screenreaders and such; rather than being any sort of effective security measure; but some users set that unnecessarily.
* Try '''Firefox Button (or Tools) → Options → |Advanced| → Accessibility → [] Warn me when Websites try to redirect or reload the page ''' (Wording and exact menu options may differ somewhat)
* See [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption#w_accessibility]]'''_accessibility'''
* Does unsetting that solve your problem ?

TS2771 why are we hearing only background sounds when using earbuds? works fine on ipod dock but not when earbud plug is pushed all the way in, it works when just barely pushed in. please someone tell me it is a "cheap" fix. :)

Just wanna know if anybody knows what might be wrong??? earbuds work but sounds like background music only when plug is in all the way. just barely in and it sounds normal. also works fine on the dock.
any input will be appreciated. the teenager is having a spasm.

The headphones work with other devices it would appear the the headphone jack is bad and needs to be replaced.
A third-party place is a lot less expensive than Apple. Here is one:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Apple - Support - iPod - Repair pricing

Query to get the data of all the columns in a table except any one column

Can anyone please tell how to write a query to get the data of all the columns in a table except one particular column..
For Example:
Let us consider the EMP table.,
From this table except the column comm all the remaining columns of the table should be listed
For this we can write a query like this..
Select empno, ename, job, mgr, sal, hiredate, deptno from emp;
Just to avoid only one column, I mentioned all the remaining ( 7 ) columns of the table in the query..
As the EMP table consists only 8 columns, it doesn't seem much difficult to mention all the columns in the query,
but if a table have 100 columns in the table, then do we have to mention all the columns in the query..?
Is there any other way of writing the query to get the required result..?
Thanks..

Your best best it to just list all the columns. Any other method will just cause more headaches and complicated code.
If you really need to list all the columns for a table because you don't want to type them, just use something like...
SQL> ed
Wrote file afiedt.buf
1 select trim(',' from sys_connect_by_path(column_name,',')) as columns
2 from (select column_name, row_number() over (order by column_id) as column_id
3        from user_tab_cols
4        where column_name not in ('COMM')
5        and   table_name = 'EMP'
6       )
7 where connect_by_isleaf = 1
8 connect by column_id = prior column_id + 1
9* start with column_id = 1
SQL> /
COLUMNS
EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,DEPTNO
SQL>

Macbook pro slow, kernel task is taking all the memory

Hi,
I'm having problems with my Macbook Pro (13-inch, Early 2011). It's been very slow lately, not only when starting but mostly all the time, even when it comes to Internet and basic tasks. I went to the activity monitor and found out this kernel_task which is consuming mostly of all my memory, and i've been reading to find out that it's a wide-shared problem.
I downloaded EtreCheck and ran it trough so that maybe someone could help me:
EtreCheck version: 1.9.12 (48)
Report generated 22 Jul 2014 16:59:27 GMT+2
Hardware Information:
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:24:57
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (129,74 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.option.driver.OptionMSD (1.11.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
GrowlHelperApp
Dropbox
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.10 Support
AdobePDFViewer: Version: 10.1.10 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 3.1.0f4 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions:
SaveFrom.net helper: Version: 3.70
Slick Savings: Version: 1.0
AdBlock: Version: 2.7.7
Zotero Connector: Version: 4.0.8
DuckDuckGo: Version: 1.6.1
DoNotTrackMe: Online Privacy Protection: Version: 3.2.1112
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
BlueStacks Install Detector: Version: Unknown
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Flash Player Support
Growl Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 176.46 GB
Destinations:
Juan Manuel Ledesma Viteri' [Network]
Total size: 463.44 GB
Total number of backups: 2
Oldest backup: 2013-05-29 21:39:33 +0000
Last backup: 2013-08-01 22:25:01 +0000
Size of backup disk: Too small
Backup size 463.44 GB < (Disk used 176.46 GB X 3)
Juan Manuel Ledesma Viteri' [Network] (Last used)
Total size: 463.44 GB
Total number of backups: 47
Oldest backup: 2013-05-29 21:39:33 +0000
Last backup: 2014-07-22 10:03:44 +0000
Size of backup disk: Too small
Backup size 463.44 GB < (Disk used 176.46 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
 2% WindowServer
 1% Activity Monitor
 1% fontd
 0% sysmond
 0% syncdefaultsd
Top Processes by Memory:
242 MB Safari
164 MB Finder
139 MB com.apple.WebKit.WebContent
111 MB mds_stores
102 MB com.apple.quicklook.satellite
Virtual Memory Information:
932 MB Free RAM
1.50 GB Active RAM
603 MB Inactive RAM
1023 MB Wired RAM
273 MB Page-ins
0 B Page-outs
I also entered in the Terminal :
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM deta
Here's the result of the scan:
Boot Mode: Normal
Model: MacBookPro8,1
Battery cycles: 832
System diagnostics
 2014-07-21 com.apple.WebKit.WebContent spin
 2014-07-22 CVMServer,diskarbitrationd,diskimages-helper,hdiejectd,launchd,m shutdownStall
 2014-07-22 Safari spin
 2014-07-22 Safari spin
 2014-07-22 Safari spin
 2014-07-22 Safari spin
 2014-07-22 Safari spin
 2014-07-22 backupd,diskarbitrationd,diskimages-helper,hdiejectd,identityser shutdownStall
 2014-07-22 cfprefsd,launchd,nmpppstatsd,ubd shutdownStall
 2014-07-22 com.apple.WebKit.WebContent spin
User diagnostics
 2014-06-24 com.apple.WebKit.WebContent crash *
 2014-07-17 com.apple.WebKit.WebContent crash *
 2014-07-18 com.apple.WebKit.WebContent crash *
 2014-07-22 Safari crash *
* Code injection
Kernel messages
 --- last message repeated 3 times ---
 Jul 16 12:44:33 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
 Jul 16 13:59:38 PM notification timeout (pid 252, Seagate Storage )
 --- last message repeated 3 times ---
 Jul 16 16:04:35 PM priority notification timeout
 Jul 16 18:00:31 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
 Jul 16 18:05:25 PM priority notification timeout
 Jul 16 20:01:23 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
 Jul 16 20:06:17 PM priority notification timeout
 Jul 16 21:37:09 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
 Jul 17 01:27:58 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
 Jul 17 13:40:06 PM notification timeout (pid 236, Seagate Storage )
 Jul 17 15:44:15 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
 Jul 17 18:11:56 PM notification timeout (pid 236, Seagate Storage )
 --- last message repeated 7 times ---
 Jul 19 16:48:20 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
 Jul 19 21:06:01 PM notification timeout (pid 236, Seagate Storage )
 Jul 20 12:23:00 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
 --- last message repeated 1 time ---
 Jul 20 12:55:52 PM notification timeout (pid 236, Seagate Storage )
 --- last message repeated 2 times ---
 Jul 20 20:28:21 PM notification timeout (pid 265, Seagate Storage )
 --- last message repeated 9 times ---
 Jul 22 02:08:19 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
 Jul 22 10:21:09 PM notification timeout (pid 282, Seagate Storage )
Extrinsic daemons
 com.microsoft.office.licensing.helper
 com.adobe.fpsaud
Extrinsic agents
 com.google.keystone.user.agent
launchd items
 /Library/LaunchDaemons/com.adobe.fpsaud.plist
 (com.adobe.fpsaud)
 /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
 (com.microsoft.office.licensing.helper)
 Library/LaunchAgents/com.google.keystone.agent.plist
 (com.google.keystone.user.agent)
Extrinsic loadable bundles
 /System/Library/Extensions/OptionMSD.kext
 (com.option.driver.OptionMSD)
 /System/Library/Extensions/OptionQC.kext
 (com.option.driver.OptionQC)
 /Library/InputManagers/Safari AdBlock/Safari AdBlock Loader.bundle
 (net.sourceforge.SafariAdBlockLoader)
 /Library/Internet Plug-Ins/AdobePDFViewer.plugin
 (com.adobe.acrobat.pdfviewer)
 /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
 (com.adobe.acrobat.pdfviewerNPAPI)
 /Library/Internet Plug-Ins/Flash Player.plugin
 (com.macromedia.Flash Player.plugin)
 /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
 (com.microsoft.sharepoint.browserplugin)
 /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
 (com.microsoft.sharepoint.webkitplugin)
 /Library/Internet Plug-Ins/Silverlight.plugin
 (com.microsoft.SilverlightPlugin)
 /Library/Internet Plug-Ins/Unity Web Player.plugin
 (com.unity.UnityWebPlayer)
 /Library/PreferencePanes/Flash Player.prefPane
 (com.adobe.flashplayerpreferences)
 /Library/ScriptingAdditions/SIMBL.osax
 (net.culater.SIMBL.osax)
 Library/Address Book Plug-Ins/SkypeABDialer.bundle
 (com.skype.skypeabdialer)
 Library/Address Book Plug-Ins/SkypeABSMS.bundle
 (com.skype.skypeabsms)
 Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
 (com.Google.GoogleEarthPlugin.plugin)
 Library/PreferencePanes/Growl.prefPane
 (com.growl.prefpanel)
Unsigned shared libraries
 /usr/lib/libtcl.dylib
 /usr/lib/libtcl8.5.dylib
 /usr/lib/libtk.dylib
 /usr/lib/libtk8.5.dylib
Safari extensions
 AdBlock
 DuckDuckGo
 DoNotTrackMe- Online Privacy Protection
 Zotero Connector
 SaveFrom
Restricted user files: 209
Font problems: 41
Elapsed time (s): 243

Please follow this updated version of the instructions you found.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Confused why my video exports at 640x480 when all the clips are 1280x720

All of my clips are from a canon 7d shot at 1280 60fps mostly surfing so I can slow it down. I added one clip which is at 640 to the project and when I exported the project in H.264 or any other setting it is only at 640. So I went back removed the clip and tryed to export again and it still only does 640 even though all the clips are now at 1280. I would hate to have to edit all over again. Thanks for any help.

Thanks I realized I can click the wrench at the bottum right of the inspector box and change the properties back to 1280 so that helped but I couldn't change the FPS they are stuck on 30 not the end of the world. I think I must have accidently put a 640 clip as the first clip when I dropped into the timeline and even though I deleted it, it kept everything at that setting . It would be nice if you could change the properties after the fact.

Remove all the special characters using java.util.regex

Hi,
How to remove the all the special characters in a String[] using regex, i have the following:-
public class RegExpTest {
 private static String removeSplCharactersForNumber(String[] number) {
 String number= null;
 Matcher m = null;
 Pattern p = Pattern.compile("\\!\\@\\#\\$\\%\\^\\&\\*\$\$\\_\\+\\-\\{\\}\\|\\;\\\\\\'////\\,\\.\\?\\<\\>\\[\\]");
 for (int i = 0; i < number.length; i++) {
 m = p.matcher(number);
 if (m.find()) {
 number= m.replaceAll("");
 System.out.println("Final Number is:::"+number);
 return number;
 public static void main(String args[]){
 String[] str = {"raghav!@#$%^&*()_+"};
 RegExpTest regExpTest = new RegExpTest();
 regExpTest.removeSplCharactersForNumber(str);
This code is not working and m.find() is "false", here i want the output to be raghav for the entered string array, not only that it should remove all the special characters for a entered string[]. Is there a simple way to do this to remove all the special characters for a given string[]? More importantly the "spaces" (treated as a spl. character), should be removed as well. Please do provide a solution to this.
Thanks

You don't need the find(). Just use the replaceAll() on each element of the String[] i.e.
String[] values = ...
for (int i = 0; i < values.length; i++)
 values[i] = p.matcher(values).replaceAll("");
}I can't understand your regex since the forum software has mangled it but you just need to add a space to the set of chars to remove. When you post code, surround it with CODE tags then the forum software won't mangle it.

Where are all the UME actions and UME roles stored?

Hi there,
I had a look at the SAP<SID>DB.UME* tables, it seems to me that they are not stored there.
What I wanted to achieve is to build a list of all user, user to role assignment, all UME actions, and role to action assignment so that we can do some analysis of the data.
Another related question is about the SPML based java API for user management in UME. It only allows you to list all the UME roles. What about the J2EE security roles? It seems to me that by using this API, you can not get a complete picture of user authorization, which includes both UME role and J2EE security role. Any comments?
Thanks in advance
GG

Hi,
I would suggest to use [UME Java API|http://help.sap.com/javadocs/NW04S/SPS09/se/com/sap/security/api/package-summary.html] instead of reading from the DB tables. You can get all users using methods of the class IUserFactory. The class IRoleFactory has method getRolesOfUser which gives you all roles for each user. Don't forget about roles assigned to user groups. Have a look also at package com.sap.security.api.acl. You should be able to get all ACL entries using [IAclManager|http://help.sap.com/javadocs/NW04S/SPS09/se/com/sap/security/api/acl/IAclManager.html]. Especially, check the code example. I've never done this but from reading javadocs it looks like it should be possible.
Have a look also at this [document|http://help.sap.com/saphelp_nwce711core/helpdata/en/a4/d39b3e09cdf313e10000000a114084/frameset.htm]. It describes the authorization concept of the AS Java.
Cheers

TS1424 i purchased several complete albums and not all the songs downloaded completely

I purchased several complete albums only to find out not all the songs downloaded completely . Who do i need to contact at apple to fix this problem ??

You do not need to contact anyone.
Delete and redownload the trouble songs:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

SuperDuper kills only Crucial M4 SSDs or all the brands?

Similar Messages

Maybe you are looking for