Superession with N to 1 and 1 to N for Planning

Dear All,
  Please let me whether SCM 7.0 (APO) supports Supersession with N to 1 and 1 to N cases for Heuristics,CTM,Optimizer and Deployment. And do let me know any link where I can get the detail information on it.
Thanks,
Siva.

Hi Shiva,
SCM 7.0 supports N to 1 and 1 to N superssion for Heuristic and optimizer but not incase of CTM.
In case of CTM only simple discontinuation And FFF class is alowed.
Heuristics and Optimizer:
http://help.sap.com/saphelp_scm70/helpdata/en/21/186b398c15ef59e10000000a114084/frameset.htm
CTM :
http://help.sap.com/saphelp_scm70/helpdata/en/89/6037423cf7ab04e10000000a1550b0/frameset.htm
Regards,
Srini

Similar Messages

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • 48 Hours ago I started to upgrade to Mtn Lion on a now 10 day old IMac - 30 minutes ago I got the email with the content code and redeem code for the download from the app store - it said download was happening, but nothing happened for 30 min - FIX IT!

    48 Hours ago I started to upgrade to Mountain Lion on a now 10 day old IMac - 30 minutes ago I got the email with the content code and redeem code for the download from the app store - it said download was happening, but nothing happened for 30 min - HOW DO I (or you) FIX IT!?

    This is a User's Forum, yelling at us won't help. You have 90 days of customer support via telephone. Use them as they can interact with their system and hopefully get you back on track. Otherwise take it to them at the Genius Bar and have them make it good.

  • Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

    Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What  can I do?

    Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
    1. Reboot and immediately hold down command and R (two keys).
    2. When you see the screen shown on this page, select Disk Utility and continue.
    3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
    4. After Repair Disk, click Repair Permissions.
    Quit DU and restart.

  • Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

    Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

    Never mind my question on the photoshop elements 13 trying to install the camera raw update. It has been taken care of thank goodness!

  • Charger that came with Ipad gets hot and only charges for a short time or not at all

    charger that came with Ipad gets hot and only charges for a short time or not at all

    Stop using it and Return it to the Place of Purchase and get it checked... ASAP...

  • Idoc type and message type for Planned Independent Requirement (PIR)

    Hi
    Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
    And also the prerequisites to use them.
    Regards,
    Lohitha
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on May 23, 2011 10:45 AM

    Hi,
    You can use IDoc type WMMBID02 with message type WMMBXY.
    Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
    Regards,
    Ferry Lianto

  • DIM and ODI adaptors for Planning

    Hi,
    I wish to know that DIM adaptor for Planning and ODI adaptor for planning can work with only Classic planning applications ? Are they not able to work with EPM Planning application ?
    Thanks
    Edited by: user641864 on Mar 30, 2009 12:01 AM

    ODI can extract data from essbase with a knowledge module and I believe DIM lets you create report scripts to extract data.
    These are both using the essbase adaptors and not the planning adaptor.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Balance Sheet and Income Statement for Plan data

    Hi Everyone,
    in our Company  we maintain Plan in COPA for next year that is for 2009 , we have finished all the Planing activities and now (users asked me), they want to have Balance Sheet and Income Statement for the data we have in Plan version , I am not sure what they are Talking about, please help me ,
    where can I set up that requirement ?  and what is actually Balance Sheet and Income Statement for Plan data?
    Thx
    Niki

    Is the issue resolved?
    What did you do?
    Thanks
    Naveen

  • How do I "Print Booklet" with just odd pages and even pages for duplexing . . options disabled

    I have InDesign CS5.5 on a Windows 7 64-bit machine hooked to a Xerox 7750 printer.  I have created a 8.5x11 portrait document and trying to create a booklet on 12x18 sheets.
    I need to print duplex manually and so I need to print just the odd spreads and then the even spreads.
    I have printed to Adobe PDF and printed from my created PDF file and have it working, but I want to know why InDesign won't let me do it.  When I click "File > Print Booklet > Print Settings" then it shows the Print Dialog box with the Pages section, which includes the Sequence that normally would allow me to do Odd Pages or Even Pages, but it is disabled.  Why?  I can define Print Presets and I can choose Odd Pages, but when I choose that in the Preset box it does not show anything, everything is still disabled.
    Anybody have any idea of why it is disabled?  Is it my printer driver?

    I too was very frustrated after upgrading to indesign cs5.5 and the latest LION OS on my new MAC.  I missed the odd/even page selection in the print dialog box within Indesign.  I tried about everything and found little of value in various forums.  But I did find a workable solution that makes since in terms of Apple's OS.
    My objective is to "impose" my document and also end up with a file that I can just print again and again without "ripping" in the InDesign Print Booklet Dialog.
    Here is the quick version of what to do.  I am not including every little step with pictures. =)  (I can if there is interest.)
    1. create your document
    2. Print Booklet
    3. At the first dialog box, just ignore the printer in print preset (you will come back to this) and go to the 2-up perfect bound option and select 16 page signatures.  This will impose 2-up on 4 physical pieces of paper printed both sides.  So 16 of your document pages printed duplex on 4 physical sheets of paper.  It would be nice to then just select the printer and scaling, etc. and the option to print even pages, flip over and then print odd pages but that ain't an option.  If you have different needs, do the math and input the correct numbers before proceeding
    4. Click on Print Settings  to pull up a second dialog box.
    5. Select for Printer PostScript File (not your printer)  Also select for PPD your printer or Adobe PDF 9 if you have that installed.  Don't obsess on this just pick your Printer for the PPD.
    6. Select 1 copy and All Pages while in the General Tab
    7. Select the Setup Tab Here is where you put in the actual physical paper size that you are going to print your document on. Don't scale to fit.  You must do this.  If you feel the need, check out all the tabs and options but for now, you are just trying to get an output file.  You probably do want to select CENTER for page position in this same setup tab.
    8. Hit OK whcih will return you to the original dialog.  Check when you return to be sure that at the top Printer is populated with PostScript File.  Click on Print and give the thing a name and a location to save at the resulting dialog.
    Breathe as you are almost home.  You have sucessfully created a file that can be called up again and again without opening InDesign. (albeit, a postscript file but not a problem)
    Now,
    1. Double click on this new file (it will have a .ps extention) or just open it in your PREVIEW (apple supplied utility)   Preview is where you accomplish the even and odd page objective.
    2. Preview will show you a short progress dialog while it rips this postscript file into a PDF.
    3. Click on PRINT
    4. Select your printer,page range, select the Paper Size (again not document size  but  the size sheet that you are printing the 2-up , imposed (booklet) document on. If not in the selection dialog, then use the custom option to create it (custom paper size) and give it a name.
    5. Click on SCALE and insert 100% in place of the weird number that it will insert for you.  You will then see your document correctly displayed in the sidebar preview window.
    6.  OK, now what you have been waiting for. Click on the box that says Preview (the active window) and select Paper Handling from the drop-down and select from Pages to Print the coveted odd or even page selection.  You can also do other things that should have been back at the InDesign print dialog but are now gone.  Explore. Enjoy.
    7.  You will have to work out your own work flow about reverse or no reverse order and how to flip, etc. But you will be working with something predictable at this point.
    8.  Since this has been ripped into a PDF , you might as well Click on the PDF button and click on save as a PDF at this point to save that postscript to PDF rip.   Also print using PREVIEW for the newly created PDF file next time as you will not have to learn a bunch of new dialogs and be frustrated all over again.
    I am now back in business printing the book blocks for my handbound journals.

  • Creating order with out Company code and plant - just for pricing -possible

    Hi gurus
    Just for creating sales order (let us say no delivery and no billing, client was not intrested in the initial setup) for just pricing thing, does we really need Company code and plant. with out that just with sales org setup(sale org+D.C) can I create an order to full fil the pricing scenario.
    Please I need help on this
    Thanks
    Kris

    hi kris,
            we cannot create a order with out company code and plant , due to the following reasons
          we do not require the company code to create the order , but we require the plant to create a material and use it in the sales order .and we require a company code to create a customer .
    the pricing procedure is determined depending upon the sales area(sales org+distribution channel +division).
    please reward the points if it is helpful
    Regards,
    Murali

  • How to detect full version and patch version for planning 9.3

    Hi,
    I'd like to detect full version name and applied patch (fix) version for planning 9.3?
    And other products of EPM too.
    Please help me.

    For AAS, APS and HBR, log on to the AAS Console and go to Help - About
    For Essbase, right click the Analytic Server in the AAS Console and go to Edit - Properties
    For FR, log on to the FR Studio and go to Help - About
    For the Workspace, log on to the Workspace and go to Help - About Workspace. Click Version Details to get the Web Analysis version.
    Hope this helps.
    Seb
    www.capiotech.com

  • Help with simple OS upgrade and backup questions for a dumb old previous PC user...?

    Ok...have mercy on me, please...
    I am not completely dumb, I know typical board etiquette, and I have searched for various answers (and found many)...but I just want to confirm my personal "research" and get all of this clear up before I proceed with this insanity.  I know I could probably search more, but this is taking hours, because of all my various questions, one leads to 10 more...
    I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right?  Told you I was dumb...)
    Processor:  3.06 GHz Intel Core 2 Duo
    Memory: 2 GB 800 MHz DDR2 SDRAM
    My main goal:  install an app that was in the Mac App store.
    However, with Leopard, I can't access the Mac App store with Leopard, apparently. 
    I click on the Mac App store, and up pops up a Lion advertisement...telling me I should upgrade.  Ok, fine...probably a good idea, anyway...
    But how do you upgrade to Lion?  Apparently through the Mac App store!
    The web-redirects on the Apple site are amusing...taking me on an endless cycle...purchase Lion in the app store...click..."you need to upgrade to Lion"...OK...click..."you need Lion at the app store"...OK...click..."you need to upgrade to Lion to get to the app store"....etc.
    OK...fine...google searches...ahh, I need to upgrade to Snow Leopard first, apparently!  Yes?
    (Maybe the Apple redirects should detect that I have Leopard, and direct me to a screen that explains that I must upgrade to Snow Leopard...and then Lion!  Do you hear that, Apple?  Thanks.)
    Anyway...so here's my plan:
    1) Upgrade to Snow Leopard
    2) Access the Mac app store
    3) Upgrade to Lion
    Question A:  With my iMac (specs above), is it really advisable for me to do this?  Can my computer really handle Lion?  It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?  Is this a dumb idea, even if "OK"?  I know that "minimum requirements" on a PC often meant:  "Well, it will work...but it will be slower than a snail and crash if you run 5 programs at the same time" (which I usually do...)  I don't want to upgrade if the "minimum" is really not enough. 
    Question B:  If the answer to A is "not a good idea", then  do I just need a new computer (i.e. better processor)?  Or do I need more Ram?  And can I add Ram to this computer, and is it relatively easy?  I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install.  Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities.  Will it be harder for a Mac?
    = = =
    Next:
    When upgrading an OS on a Windows, you pretty much format the harddrive and start all over.  Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare.  You could NOT just back-up software.  You typically had to re-purchase and install it all from scratch.  Is this the same with Macs?  Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare!  I hate PCs.
    Anyway...so, my iMac has Time Machine.  I am pretty ignorant about this, and based on my previous PC backup program nightmares, I have a distrust for it...and don't really understand how it works.  But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet.  So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C...
    Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.  My wife and I both access the computer, so two user accounts.  Does Time Machine really do a good job backing up everything and all things?  Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?  Anything for me to "watch out for"...or to do when I buy a new external hard-drive and setup up Time Machine for the first time on it, in order to make this work well?  Will I have to re-install all the various applications I have installed on this thing?  (like with PCs?)
    Thanks for any sincere help. 

    yachadhoo wrote:
    I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right?  Told you I was dumb...)
    Processor:  3.06 GHz Intel Core 2 Duo
    Memory: 2 GB 800 MHz DDR2 SDRAM
    Apple has discontinued support for 10.5, it's a plaque of our platform that Apple only supports the last two operating systems in circulation.
    Where as on Windows you can run the same OS version for 10 years and get updates free (if not stolen), on a Mac we get one year, two tops now and if you don't upgrade and break all your third party software and hardware drivers in the process, then your denied security updates.
    On top of that, the OS X upgrades tend to break your older hardware too, or slow it down so much that it drives you to want to buy newer hardware.
    It's funny Apple places the AppStore on your OS X version along with iTunes and Safari updates, but then doens't supply necessary security updates, your machine may be compromised and here you enter vital credit card info, banking  etc. thinking you have a secure machine.
    My advice, since that's a 10.5 era Mac, is to upgrade to 10.6.3 via this disk, then use Software Update until clear. You'll get security updates and your present installed 10.5 software will work in 10.6 using Rosetta.
    http://store.apple.com/us/product/MC573Z/A
    Rosetta is not avaialble in 10.7 so it could be a lot of your software will no longer function
    http://roaringapps.com/apps:table
    I don't see the sense in you buying all new software for a machine that's at it's end of life stage.
    You can buy software in the AppStore with 10.6.
    Question A:  With my iMac (specs above), is it really advisable for me to do this?  Can my computer really handle Lion?  It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?
    You will need to buy 4GB of RAM to run Lion well, the 2GB is just a bare minimum, and your processor is a bit dated.
    Lion 10.7 is certainly slower than Snow Leopard 10.6, in fact so many wanted to go back to Snow Leopard and one of the resons was Lion was slow.
    So I wrote a User Tip, here, but the Tips were implemented only recently.
    How to revert your Mac to Snow Leopard
    Question B:  If the answer to A is "not a good idea", then  do I just need a new computer (i.e. better processor)?  Or do I need more Ram?  And can I add Ram to this computer, and is it relatively easy?  I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install.  Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities.  Will it be harder for a Mac?
    RAM is easy, you can buy it at Otherworld Computing or Crucial.com and install it yourself, there is a little door under the monitor.
    Videos online at YouTube.
    When upgrading an OS on a Windows, you pretty much format the harddrive and start all over.  Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare.  You could NOT just back-up software.  You typically had to re-purchase and install it all from scratch.  Is this the same with Macs?  Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare!  I hate PCs.
    Mac'soperaing system is seperate, it can be replaced or upgraded indepentantly of programs or user accounts on the machine.
    There are some programs that install a kernel extension file at boot into OS X, those get knocked out, but those can be replaced with a new install of the software.
    You should always backup your users files as those can't be repalced.
     Most commonly used backup methods explained
    Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.
    OS X upgrades dont' affect User accounts but they can have a affect on programs installed, which most of your 10.5 programs likely will no longer work in 10.7
    However they will (with a slight update) work in 10.6 just like before.
    You need to backup regardless, I suggest a manual backup of users files to a storage drive, a 10.5 clone on another drive, the your ready to upgrade to 10.6
    10.5 to 10.6 upgrade is rather painless, also 10.6 gives accelerated video drivers, so your machine will appear faster.
    However once you install 10.7, you will slow down.
    Does Time Machine really do a good job backing up everything and all things? 
    No, you shouldn't rely upon TM, have a multiple backup stragedy, TM files are hard to access directly.
    Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?
    No need to restore, OS X upgrades and leaves everything else in place, just some programs (with 10.6) or a lot (with 10.7) when you try to launch them they will fail.
    Also when you connect TM it will do a substancial change to reflect the new boot drive.
    If you were using TM as a "storage drive" thinking you can use the archived versions later, that wil change upon the new OS X  upgrade.
    But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet.  So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C..
    You need not only TM drive, but a bootable clone and user files on a storage drive.
     Most commonly used backup methods explained
    Will I have to re-install all the various applications I have installed on this thing?  (like with PCs?)
    No, depending upon what OS X version you stop at depends how many programs no longer work.
    You will have to buy a lot of new or upgrade versions with 10.7, not so with 10.6 only updates mostly because of Rosetta on 10.6 and not on 10.7
    My opinion, since that machine is a bit dated, is to upgrade to 10.6, Software update to 10.6.8, and stay there.
    Later on 10.8 is being released after this summer, you may want to consider getting a new machine with 10.8 a few months later to ensure all the bugs are worked out of it.
    Your not a comptuer savvy person, you like most Apple users expect your machine to "just work" I think going to 10.7 will be a bad experience for you.
    10.6.8 will server your needs until 10.8 is released and on new hardware where Apple will hold your hand for free for three months, 3 years with AppleCare.
    Your not a "OS X upgrader type of a person" and Apple needs to get of thier collective assets and pay better attention to it's most common users.

  • Desperately need help with a networked printer and SMB sharing for windows

    Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
    Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
    I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
    They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
    Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
    Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
    Thanks in advance for the help. I'm extremely frustrated.

    We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
    Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
    What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
    Again, I think it stems from the update.

Maybe you are looking for