Superimposed blank area in web interface after close group

We have a web based (WIB) bps application the includes many manual layouts. In order to maintain the compactness of the page, we have put these manual layouts into "Groups" using the WIB "group" object.
We are finding that when running the applicaiton in the browser, upon opening and then closing the group, we are left with a "shadow" or rectangle that is the size of the layout before closing and which subsequently covers up any content underneath it. Using the "refresh" button cleans things up but this is very annoying.
Hase anyone else experienced this problem? Any thoughts?
Thank you in advance.
Andy

Alberto,
I in fact have tabs which are contained withing groups so that the layouts can be "closed" ie. all of the layouts are accessible from one visible page.
Thus the problem is still unsolved.
Andy

Similar Messages

Jumbled text in web interface after updating Web Services / firmware

I got a message on the screen of my Officejet 6700:
Update Recommended
An update is available for Web Services (ePrint and Apps).
Do you want to proceed?
I selected Update Now, and it installed fine, or so I thought.
I checked the web interface for the printer, and find there is a bunch of jumbled text, like the code is messed up for the web server.
I had just finished checking the status of ink cartridges (and subsequently replaced one), therefore I fortunately still have the fully functioning webpage open on another machine, so I can tell exactly what the before-and-after is on that one page.
On the Tools > Ink Gauge page, on the good (old) page the table says (title, first row, first column):
Installed Cartridges
Color | Magenta | Cyan | Yellow | Black
Part Number
Type
End-of-Warranty Date (Y-M-D)
First Installation Date (Y-M-D)
Ink Zone
USE
HP
But after updating the software, it says this:
Print Self Test Page
L@S#0456 | Number of Logged Events | L@S#0462 | L@S#0552 | L@S#0450
Accumulated Media Usage
Date
L@S#0477
L@S#0561
L@S#3345
Also, the "Order Supplies" link, with a popup text of "Order printing supplies"
now says "Ink Cartridge", with a popup text of 'Block unwanted faxes"
And "Print Printer Status Report" now says "L@S#2567".
I went to the support section, and found a firmware update, but upon downloading and running it, upon finding the printer, it says it is already Up-to-date, and won't let me select it to try and re-apply the firmware update (as that's evidently what going through the touchscreen menu has already done).
Do I need to just restore to factory settings? I would think firmware wouldn't be changed by doing that. There isn't an old version of the firmware available on the product support page, to revert to an older version.
Via the printer touchscreen menu, a printed Printer Status Report says the firmware version is MPM3CN1322DR.
How do I force a re-install of the firmware, or get them to fix the firmware that was published on 2013-06-25?
This question was solved.
View Solution.

michaelprang,
You are unable to revert back or reinstall the firmware since it has already been downloaded and updated.
Have you attempted to use a different web browser?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

[ACS]Problem web interface after reboot

Hello,
After power outage, when my ACS reboots the web interface doesn't start.
When I connect to CLI with SSH, I enter the command :
sh acs-config-web-interface
This is the result :
ACS management must be running
Please issue 'acs start' CLI if stopped,
or wait for the ACS processes to come up
So I enter the command :
acs start
And it's OK.
What is the reason why the ACS doesn't start properly?
Thank you in advance for your response.
Regards.
Thomas.

Hi Thomas,
Which version of ACS you are running?
Regards
Najaf

How to group transactions in blue area of Web Interface

Hello,
I been trying to figure out how to group transactions in the blue area of the Web Interface similar to 'Go Shopping'. I tried to search the forum and did not find ana answer. Is the grouping done by security roles?
Please let me know.
Thank you in advance for any assistance.

Hi,
In trascn PFCG,under MENU tab,you can change the grouping of transactions as well as text for the MENU.
BR,
Disha.
Pls reward points for useful answers.

P&L report (using web interface builder)???

Hi all,
Can someone explain BPS report concept for me?
For example,
In my P&L report, I will have fixed cost, variable cost, and revenue...etc.
I created fixed cost layout, variable cost layout, and revenue layout...etc.
My question is how those layouts generate a P&L report on the web interface??? If I enter planning data in the fixed cost layout and the values should be in the P&L report as well. How can I create P&L report in the web interface after I finished all layouts???Thank you for sharing
J.

Hi
You should create a BEX Web Query and integrate it in the upper level of WEB Layout.
Check this link for a step by step guide about this topic
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/bi/nw04/how%20to%20integrate%20bex%20web%20applications%20into%20bps%20web%20interfaces.doc
Ciao
Andr

How to create web interface whose name includes _ (underscore)

Hi Experts,
In my project we are creating web interface. The steps are as below:
1) Run transaction code upspm and copy the planning folder
2) Save the planning folder as web enabled planning folder
3) Generate web interface for step 2. Here I have to provide following details:
Name of planning folder
Web Application
Package
I have to create Web Application whose name should include _ like ztest_test
The system is not allowing me to create web application whose name includes _
Can you please how I can create web application whose name includes _
I am not allowed to use the wizard or manual method to create web interface.
Regards,

Hi
U can use the transaction BPS_WB to create u r web interface builder and for execute check another transaction BPS_wef (check once).
UPSPM for planning folder not for web interface builder.
Thanks,
Debasish

SGE2000 Web Interface not loading

Getting a white screen in both frames of the web interface after logging in. Can't figure out why it won't load.
SW ver 3.0.0.18
Boot: 2.0.0.03
HW Ver: 00.00.01
Have tried using Easy Upgrade tool and get a warning : Did not find device information. Application will terminate.
Step1:Trying to open telnet connection...
Step1:Gathering information
show system--checking result for "show system unit 1-2
Step1:Type :
Step1:OID : 1.3.6.1.4.1.9.6.1.72.2000.2
Step1:Sys Name : Corporate
Step1:Location : ServerRoom
Step1:Sys Contct : IT
Step1:Mac-Address : f0:25:72:89:9e:e2
Has anyone else run into this issue? Any ideas how to resolve?

Hi parking, if the GUI will not load please try the following;
The same computer using IE, Firefox, Chrome,etc
Different computer with the mentioned browsers (preferably Windows 7 or older)
If none of these work, try to factory reset the switch as it sounds like the software is hung

Empty Grantee drop-down in web interface?

Having two schemas, sample1 and sample2, with a table in sample2 that I want visible to sample1, I want to apply the GRANT statement to that table with sample1 as the grantee.
Using the web interface, after selecting the table Object Browser, selecting Tables from the list, then clicking once on the table of interest, then clicking the Grants link, then the Grant "button", I am presented with a dialog for issuing a grant.
However, the Grantee drop-down list is empty! I was hoping to see "sample1" listed there.
Issuing the statement in the SQL Command window functions appropriately, of course. The Grants page even shows them properly afterward.

Robert,
Good catch. I filed a bug on this issue.
Sergio

Saving Data in Web Interface

Hi Experts,
I have following problem, Please provide your inputs to solve this.
Background Info: We are using web interface ( web excel) for planning and we have fund center authorization variable and once user launches the interface and select fundcenter, the data appears and user goes on doing planning. We do have, running planning sequences on save functionality implimented and we are running global planning sequence having the functions which check automatically executed before saving of data.
Issue:When user is in fund center "A" and inputs in the layout some data and hits the save button and error is generated from the error function because of wrong data input and data is not saved into cube. It is fine to this point. Now user does not eixt the interface but navigates to other fund center i.e "B" and keys in data and hit the save button, no errors occur and data is saved. Here is the problem, at this point it is saving data of Both fundcenter A and B. We want to save only data of fundcenter B at this point. The error functions are running only on the fund center that user is selecting but I should be able to release the fund center A when user navigates away from it.
Any thought to solve my issue is appreciated with points and let me know if you need any additional details.
Thanks,
Raj.

Hi Guys,
Thanks a lot for your suggestions.
Anand >> Please let me know how can I create a function to clear the buffer once the user selection changes on the fundcenter. Is it a function module ?
Marc >> I cannot run the planning function on all the fundcenters that user is authorized because more than one user is authorized for same fund center and locking is based on fundcenter. If I run the function for all the fund center that the user is authorized then he is going to create a lock on all fund centers and that results in locking issues. Please let me know if see any other solution to solve this issue.
In general, I will be ok even if user looses the data in buffer for fund center "A" when they navigate out of it when error occur but I should not be saving the data.
Thanks a lot guys for quickly understanding the problem and providing your thought on it. I know this is best thing about the SDN.
Thanks,
Raj.

Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
 Targets:
 interconnect
 ipv6
 test
 Properties:
 commitpending = (Cannot show property)
 dhcp_clientid = none
 dhcp_server_ip = xxxxxxxxx
 ipaddress = xxxxxxxxx
 ipdiscovery = dhcp
 ipgateway = xxxxxxxxx
 ipnetmask = xxxxxxxxx
 macaddress = 00:10:E0:65:2F:20
 managementport = MGMT <<<<<<<<<<<<<<
 outofbandmacaddress = 00:10:E0:65:2F:20
 pendingipaddress = xxxxxxxxx
 pendingipdiscovery = dhcp
 pendingipgateway = xxxxxxxxx
 pendingipnetmask = xxxxxxxxx
 pendingmanagementport = MGMT <<<<<<<<<<<<
 pendingvlan_id = (none)
 sidebandmacaddress = 00:10:E0:65:2F:21
 state = enabled
 vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

After a while, WRT54G won't allow me into web interface anymore.

I can get into the web interface shortly after powering on the router. But after several hours, or days, I no longer can access it. The internet and network continue to work, I just can't access the settings page (I get something like "page cannot be displayed" in all browsers).
If I unplug the router and plug it back in, I can get into the settings page again.
What might cause this? Would it be fixed if I upgrade the firmware?

Hi. I think people are misunderstanding my issue. That'smy fault, as I didn't report the error accurately. The error is actually an "Empty server response", not a 404 page not found. So it's talking to the router, but getting nothing back.
I understand wired connections are not subject to interference, the way wireless ones are.
However a wired connection for this PC is not feasible without bashing holes in the wall,
and anyway I can see no reason why I can't do this wirelessly (even if there's some risk of interference).
Some people seem to be implying this is "By design" and you're expected to access the settings page only via a wire, and it's perfectly normal to require a reboot before being allowed into it. I don't buy that. I've used other routers where I can access the settings wirelessly every time, even if it hasn't been rebooted in a long time.
What I'm getting at is this: the current issue has nothing to do with interference, if it were interference then I could get on after several attempts. Or if the interference is so strong that I can't connect even after trying for hours... then a simple reboot would not fix it. But a reboot does fix it, which tells me the router seems to be holding on to some info or setting that prevents my PC from accessing it. When I reboot, it loses or changes that info/setting. I'm just curious what it might be.
If the bottom line is "your router is old and sucks, replace it" then I can certainly just do that. I'd just like to know that the new one will not have this problem.

My contacts are not showing up on the PC app or the web interface. Why isn't this working?

My contacts are not showing up on the PC app or the web interface. Message+ works fine on my Note 4 though. My contacts are saved in my Google account.
I've tried several things but message+ acts like there are no contacts in the app yet there are names and pictures in my conversations. Can anyone help me?

matthttam,
Let's make sure that we get you up and running with no issues. I want to make sure that we are on the same page. Are your contacts actually listed in the address book on your phone? Are you using Verizon Messages? Or the third party Messages from the Play Store? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Web Interface doesn't work after installing 11g

A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.

jalvarito wrote:
A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.And the error message is . . . ????

What are Web Interfaces in Oracle apps

Hi,
This is GV Krishna, Oracle apps technical consultant.
In my current project I will have to work on Web Interfaces.
I am very well aware of Conversions and interfaces using Interfaces tables and APPI's.
I do not have any basic idea on Web Interfaces so for.
Could you please suggeset what is use of Web Interfaces and how they are diffirent from other Interfaces.
How can I approch for learning Web Interfaces initially.
Please do provide if you know any documents are healpfull links.
Thanks & Regards,
GV Krishna.

Hi Krishna;
Please check below note which could be helpful for your issue:
How Can I Expose E-Business Suite Integration Interfaces as Web Services? [ID 782455.1]
Allow SYSADMIN to Change Notification Preference for Users From Web Interface [ID 746255.1] << check referance part
Regard
Helios

Aironet 1100 series web interface times out after few mins of inactivity

Hello,
I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
Thanks much for all your help.. really appreciate it.

Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
Thanks :)

Superimposed blank area in web interface after close group

Similar Messages

Maybe you are looking for