Superimposed Button Text

I have created a slide show in iPhoto with transitions, Ken Burns and music etc;
I have shared it to iDVD, then customised a theme including, changing the button font (Textile), size (36) and color (white), then clicked Burn.
The finished burned disk plays fine in my computer, but when I play it in my Bose 321 system for viewing on TV, the title button which I customised shows as two titles almost super-imposed, similar to a double vision effect.
This produces the effect of having created two buttons ( which I have not done) along with the title text almost illegible.
Is this a problem with my Bose System or are there any known issues with incompatible fonts?
I do of course realize that I need to try different DVD players and even try changing fonts etc; but this takes much time.
If anyone can offer a solution or advice I would appreciate greatly.

I have run into this before. Some of the very top end dvd equipment manufactures have highly specialized (if not selective) electronic components /dvd players/ recorders.
On the other hand some of so called "budget" dvd players / recorders tend to be much more universal in terms of playback of whatever media you put into the tray. And they are often much more adaptable to varied medias and formats. Whereas this is not always the case with top end units unfortunately. Not really sure why this is. But it does seem to happen rather often on these forums.
Bose is one example. Meridian, Denon, & Toshiba are others. You'll spend hundreds for these items. And they are often very well built. On the other hand, I've purchased a cheap Daewoo DVR07 DVD Player/ Recorder for under $75 and it plays and records to everything I've managed to throw at it over the past 6 months .... This is not always the case with some of the more expensive dvd players / recorders.

Similar Messages

Button Text options

Okay I have been working on C3 for 2 months. Subscribed to
Lynda.com...ran tutorials checked every help link. The Fireworks
Help function stinks. Editing button symbols, here's what you get
when you querie button text.
"Fireworks button symbols are a special kind of symbol. They
have two kinds of properties: some properties change in all
instances when you edit an instance of the symbol, and other
properties affect only the current instance. Here's what you get
when you querie button text.
Fireworks button symbols let you take advantage of the
convenience of symbols yet allow you to edit certain properties of
a button instance, such as text, without affecting other
instances."
Just fabulous, really.....How? Adobe tells me that it can be
done.....just not how.
I import a 3 position button from the library. I use the 9
slice tool to set the button size, enter the text in the properties
box. Tried to change the font, style or even use the fonts in the
styles tab....no luck. I'm just
trying to make a few buttons for a web page, why is it soo
hard? Why does the help link not walk you
through the process? Nothing in Lynda.com tutorial.

RobaloBill wrote:
> Just fabulous, really.....How? Adobe tells me that it
can be done.....just not
> how.
Click on the button to select it, and then change the text on
the 'TEXT'
line in the Property inspector.
> I import a 3 position button from the library. I use the
9 slice tool to set
> the button size, enter the text in the properties box.
Tried to change the
> font, style or even use the fonts in the styles
tab....no luck.
Double click on the button to open the button editor window.
Change the
font properties in the Properties inspector. Return to page
1.
Linda Rathgeber - Adobe Community Expert
http://www.adobe.com/communities/experts/members/8.html

Changing quiz button text

I am working on a series of tutorials and quizzes for our
client, I want to change the text on the "Next" button on the
quizzes. It appears easy enough, in the options, Next button text
field, I have entered what I want, but it still appears as "Next"
when I publish it. Am I an idiot?
Please help.

This may be a stupid question, but did you save the file
before you published? I have sometimes had instances of not saving
and publishing first and my changes are not reflected.
Also, if the buttons were already on the screen with the text
"Next" when you decided to change the button text, you'll need to
delete those buttons and then add them again. The text does not
update dynamically.
Worst comes to worst, you can manually change the button text
with a double-click or through properties...
Hope that helps.

Button Text on Form not Displaying

The following was posted by PGMR1998 at 09:58am on Feb 22, 2008 (Pacific) but got no response:
I am using Adobe Acrobat Pro 8, and I have added a button to reset the form fields. The button has some text on top, but the text on the button does not display until I click down on the button in the preview pane. How can I make the button text visible always? Thanks in advance for your support..
I'm having the same problem with the submit button on a form in Acrobat 9 Pro Extended. No matter what I do, the button text does not display. Any ideas?

What font are you using? What is the font color set to? What font size? Can you post a sample somewhere?
You specify the label text for a button using the Options tab of the Button Properties dialog. Describe each of the settings on this page. In particular, you can have a different label for the Up, Down, and Rollover states.
George

Unable to define Radio Button Text field & unable to change column position

Hi,
While designing a screen in Screen Painter, I am unable to define Radio Button Text field as this option is not there in Graphical Element. And also I want to specify the starting position of column of that element different from the default value, but I am unable to define that because the field is non-editable.
Can any one please help me out.
Regards,
Koushik

Hi,
Please find below the sample program from ABAP docu :
PROGRAM demo_dynpro_input_output.
DATA: input TYPE i,
      output TYPE i,
      radio1(1) TYPE c, radio2(1) TYPE c, radio3(1) TYPE c,
      box1(1) TYPE c, box2(1) TYPE c, box3(1) TYPE c, exit(1) TYPE c.
CALL SCREEN 100.
MODULE init_screen_100 output.
CLEAR input.
radio1 = 'X'.
CLEAR: radio2, radio3.
ENDMODULE.
MODULE user_command_0100 input.
output = input.
box1 = radio1.
box2 = radio2.
box3 = radio3.
IF exit NE space.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.
Here radio1(1) TYPE c is defined within the program but in the element list there are RADIO1 element exist. One is actual radio button and the other is Radio Button Text.
I am not able to create that radio button text using same object name.
Please suggest.
Regards,
Koushik

Simple Button.Text not changing properly

Hi all,
The WPF learning curve is steep.
I have pulled my hair over this simple Button.Text change and I can't get it to work.
In WinForms this works:
Public Class Form1
Private Sub BTN_1_Click(sender As Object, e As EventArgs) Handles BTN_1.Click
BTN_1.Text = "CLICKED BUTTON 1"
BTN_2.Text = "CHANGED BY BUTTON 1"
End Sub
Private Sub BTN_2_Click(sender As Object, e As EventArgs) Handles BTN_2.Click
BTN_2.Text = "CLICKED BUTTON 2"
BTN_1.Text = "CHANGED BY BUTTON 2"
End Sub
End Class
I want to do the same thing in WPF
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525">
<Grid>
<Grid.RowDefinitions>
<RowDefinition/>
<RowDefinition/>
</Grid.RowDefinitions>
<Grid.ColumnDefinitions>
<ColumnDefinition/>
<ColumnDefinition/>
</Grid.ColumnDefinitions>
<Grid Grid.Column="0" Grid.Row="0">
<Button Name="BTN_1" Click="CLICK_BTN_1">
<StackPanel>
<TextBlock Name="CLICK_BTN_1_LABEL_1" Text="Button 1 text" VerticalAlignment="Top" Foreground="#BF000000" >
</TextBlock>
<TextBlock Name="CLICK_BTN_1_LABEL_2" VerticalAlignment="Top" Foreground="#BF000000">
<Run FontSize="25">Button 1</Run>
<Run FontSize="12">Label 2</Run>
</TextBlock>
</StackPanel>
</Button>
</Grid>
<Grid Grid.Column="1" Grid.Row="0">
<Button Name="BTN_2" Click="CLICK_BTN_1">
<StackPanel>
<TextBlock Name="CLICK_BTN_2_LABEL_1" Text="Button 2 text" VerticalAlignment="Top" Foreground="#BF000000">
</TextBlock>
<TextBlock Name="CLICK_BTN_2_LABEL_2" VerticalAlignment="Top" Foreground="#BF000000">
<Run FontSize="25">Button 2</Run>
<Run FontSize="12">Label 2</Run>
</TextBlock>
</StackPanel>
</Button>
</Grid>
</Grid>
</Window>
Class MainWindow
Private Sub CLICK_BTN_1(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles BTN_1.Click
' CHANGE LABEL 1 ON BUTTON 1
CLICK_BTN_1_LABEL_1.Text = "CLICKED BUTTON 1"
' CHANGE LABEL 1 ON BUTTON 2
CLICK_BTN_2_LABEL_1.Text = "CHANGED BY BUTTON 1"
End Sub
Private Sub CLICK_BTN_2(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles BTN_2.Click
' CHANGE LABEL 1 ON BUTTON 1
CLICK_BTN_1_LABEL_1.Text = "CHANGED BY BUTTON 2"
' CHANGE LABEL 1 ON BUTTON 2
CLICK_BTN_2_LABEL_1.Text = "CLICKED BUTTON 2"
End Sub
End Class
This used to be so simple with WinForms, what am I doing wrong here?
New to WPF

Yeah, I saw that as well but now I am stuck again:
Same project but I have put the buttons in a usercontrol
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:Component_Changes"
Title="MainWindow" Height="350" Width="525">
<Grid>
<Grid.RowDefinitions>
<RowDefinition/>
<RowDefinition/>
</Grid.RowDefinitions>
<Grid.ColumnDefinitions>
<ColumnDefinition/>
<ColumnDefinition/>
</Grid.ColumnDefinitions>
<Grid Grid.Column="0" Grid.Row="0">
<Viewbox Stretch="Fill">
<ContentControl Name="UC_BTN1">
<ContentControl.Content>
<local:btn1 Margin="20"/>
</ContentControl.Content>
</ContentControl>
</Viewbox>
</Grid>
<Grid Grid.Column="1" Grid.Row="0">
<Viewbox Stretch="Fill">
<ContentControl Name="UC_BTN2">
<ContentControl.Content>
<local:btn2 Margin="20"/>
</ContentControl.Content>
</ContentControl>
</Viewbox>
</Grid>
</Grid>
</Window>
btn1.xaml
<UserControl x:Class="btn1"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
mc:Ignorable="d"
d:DesignHeight="300" d:DesignWidth="300">
<Grid>
<Button Name="BTN_1" Click="CLICK_BTN_1">
<StackPanel>
<TextBlock Name="CLICK_BTN_1_LABEL_1" Text="Button 1 text" VerticalAlignment="Top" Foreground="#BF000000" >
</TextBlock>
<TextBlock Name="CLICK_BTN_1_LABEL_2" VerticalAlignment="Top" Foreground="#BF000000">
<Run FontSize="25">Button 1</Run>
<Run FontSize="12">Label 2</Run>
</TextBlock>
</StackPanel>
</Button>
</Grid>
</UserControl>
btn1.xaml.vb
Public Class btn1
Dim CL_BTN2 As btn2
Private Sub CLICK_BTN_1(sender As Object, e As RoutedEventArgs) Handles BTN_1.Click
' CHANGE LABEL 1 ON BUTTON 1
CLICK_BTN_1_LABEL_1.Text = "CLICKED BUTTON 1"
' CHANGE LABEL 1 ON BUTTON 2
CL_BTN2.CLICK_BTN_2_LABEL_1.Text = "CHANGED BY BUTTON 1"
End Sub
End Class
btn2.xaml
<UserControl x:Class="btn2"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
mc:Ignorable="d"
d:DesignHeight="300" d:DesignWidth="300">
<Grid>
<Button Name="BTN_2" Click="CLICK_BTN_2">
<StackPanel>
<TextBlock Name="CLICK_BTN_2_LABEL_1" Text="Button 2 text" VerticalAlignment="Top" Foreground="#BF000000">
</TextBlock>
<TextBlock Name="CLICK_BTN_2_LABEL_2" VerticalAlignment="Top" Foreground="#BF000000">
<Run FontSize="25">Button 2</Run>
<Run FontSize="12">Label 2</Run>
</TextBlock>
</StackPanel>
</Button>
</Grid>
</UserControl>
btn2.xaml.vb
Public Class btn2
Dim CL_BTN1 As btn1
Private Sub CLICK_BTN_2(sender As Object, e As RoutedEventArgs) Handles BTN_2.Click
' CHANGE LABEL 1 ON BUTTON 1
CL_BTN1.CLICK_BTN_1_LABEL_1.Text = "CHANGED BY BUTTON 2"
' CHANGE LABEL 1 ON BUTTON 2
CLICK_BTN_2_LABEL_1.Text = "CLICKED BUTTON 2"
End Sub
End Class
No warnings in the code but the error is: 'Object reference not set to an instance of an object' and I thought I did, obviously not in the right way.
New to WPF

JToolBar doesn't display button text ?

I have created a new action like this
          this.putValue(Action.NAME, "Queue");
          this.putValue(Action.SHORT_DESCRIPTION, "Add ID card to print queue");
          this.putValue(Action.SMALL_ICON, this.loadIcon("resources/icons/arrowright_green24.gif"));then i call
Jbutton queueButton = toolBar.add(new QueueAction());and it displays the button with an icon but no text under it,
i was under the assumption that it would use the NAME value that i set in the action as the button text
if i call
queueButton.setText("Queue"); that displays how i want it, but if that is the case what is the point of using an action in the first place
what am i doing wrong ?
thanks in advance
alex

what am i doing wrong ?You can always look at the source code to see exactly what is going on. I found the following code which would seem to be the cause of the problem:
if (icon !=null)
    b.putClientProperty("hideActionText", Boolean.TRUE);
}Although I must admit I'm not sure why setting the text after the fact seems works since it never resets the client property. But you can chase it down through the code if you're interested.
but if that is the case what is the point of using an action in the first placeAn Action can be shared by multiple components. Typically you would have a menu item and a toolbar button for the same Action. You can then just enable/disable the Action and both components will be changed.
You should be able to solve your problem by using:
button = new JButton( new QueueAction() );
toolBar.add( button );

Problem with Approve & Reject buttons text

Hi Team,
Once we have configured UWL in EP 7.0 & backed is SRM 7.0, facing problem in Approve & Reject Buttons text.
Instead of showing Approve & Reject text on Buttons, it showing text like this com.sap.pct.srm.core.action.oldwfl.approve & com.sap.pct.srm.core.action.oldwfl.reject
Can you please help me on this?
Thanks in advance.
Thanks & Regards
Sandeep.

Sergio, Thanks for your reply.
It's happening for all the task items. Pls find out XML file here. here i pasted some of the code from my XML, because it is not taking full XML code here.
      <Action name="com.sap.pct.srm.core.action.oldwfl.approve" groupAction="" handler="FunctionModuleActionHandler" referenceBundle="com.sap.pct.srm.core.approve" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
        <Property name="IV_DECISION" value="APPROVED"/>
        <Property name="IV_APF_VERSION" value="0500"/>
        <Property name="IV_WIID" value="${item.externalId}"/>
        <Property name="IV_MODE" value="APPROVAL"/>
        <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
        <Property name="display_order_priority" value="50"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.conf.detail" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=${item.BOTYPE}&sapsrm_boid=${item.BOID}&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=${item.BOMODE}&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.oldwfl.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=BUS2203&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=DISPLAY&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.OldWFL" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="oldwfl"/>
        <Property name="ObjectValue" value="a=b&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="uwl"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=${item.BOTYPE}&sapsrm_boid=${item.BOID}&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=DISPLAY&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
Thanks & Regards
Sandeep.

Ampersand in a radio button text

Please, can somebody tell me how do I get an ampersand (&) in a radio button text using screen painter.
Thanks

On the Element list/General attr. tab I have:
Name     Type     Line     Column     Format
G_PRJ     Radio     21     30     CHAR
G_PRJ     Radio     21     32
On the Element list/Texts/ I/O templates tab I have:
Name     Type     Text
G_PRJ     Radio     _
G_PRJ     Radio     P&S
With these settings, I am getting a fullstop instead of &, so adding the text in the element list didn't work for me. BTW The text where it says _ (underline) is read-only.
Thanks.

Changing buttons text in Report

Hi !
I am using a standard Region report in my application.
There are some buttons in this Region:
"Next button" and "Previous button".
How to change the buttons text ?
I want to get empty text on this buttons.
Thanks,
Roman

Hi user....
I am sorry,
but I want to change a text of link label inside the Region.
There are two links inside the Region: Next link and Previous link.
I want to get the links without text label.
Thanks, Roman.

Can't edit button text - 6.0.2

iDVD 6.0.2
I'm unable to edit chapter button text - I can't select individual buttons, therefore can't highlight the text to change it. Clicking on a button selects the main title for that screen, not the button. "Select All Buttons" will allow me to change font/size for all the buttons on that menu, but not edit text. I'm using the "Fun" theme. Any help would be appreciated.
Phil

Could this be the problem?:
http://discussions.apple.com/thread.jspa?threadID=322543&tstart=0
iLife '06 System Requirements
• Macintosh computer with a PowerPC G4, PowerPC G5, or Intel Core processor; 733MHz or faster for iDVD
• 256MB of RAM, 512MB recommended
• Mac OS X v10.3.9 or v10.4.3 or later; v10.4.4 recommended
• iTunes 6.0.2 and QuickTime 7.0.4 (included)
• DVD drive for installation
• 10GB of available disk space
• High-definition video requires 1GHz G4 or faster and 512MB of RAM.
• Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner.
• iPhoto print services are available in the U.S., Canada, Japan, and select European countries; requires Internet access; fees and terms apply.
• .Mac account required for iPhoto Photocast publishing and recommended for iWeb. The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• iWeb requires Internet and webserver access (.Mac recommended). The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• Mac OS X v10.4.4 required for iMovie HD themes, iDVD themes, iPhoto Photocast publishing, and iChat recording in GarageBand. iChat video conferencing requires broadband Internet connection; fees may apply.

Dynamicaly change submit button text?

Is there a way to do this based on what screen you are on inside of web determinations?, I attempted editing messages.en.properties and using a substitute attribute %textSubmitButton% instead of submit and set that attribute to "testing" within the rulebase, but the submit button displayed %textSubmitButton%, Is there another way to do this?

You can override the default text displayed for the submit button by subscribing to the OnApplyTemplatesEvent and altering the value of the 'submit-button-text' property in the screen context based on the current screen being rendered.

Change the Standard ALV Export button text

Hi Expert,
I want to change the standard button ( Export Button ) text in ALV table. I had gone through some threads already but still i am not getting a clear idea on this. Could you please any one give me a clear structure on this.
Regards,
Sarathy.

Here is the new solution with out creating ZCLASS.
DATA: lo_function_dpwty       TYPE REF TO cl_prs_std_alv_funct,
        lr_functions            TYPE REF TO if_salv_wd_function_settings,
        lr_function_std         TYPE REF TO cl_salv_wd_a_function_std.
CREATE OBJECT lo_function_dpwty
    EXPORTING
      id = 'X'.
lr_functions = l_ref_interfacecontroller->get_model( ).
" append row rename
lr_function_std = lr_functions->get_function_std( if_salv_wd_c_std_functions=>edit_append_row ).
lv_button_text = 'Add Item'.
lo_function_dpwty->change_text( EXPORTING text        = lv_button_text
                                                       CHANGING std_function = lr_function_std ).
"Delete row item rename
lr_function_std = lr_functions->get_function_std( if_salv_wd_c_std_functions=>edit_delete_row ).
lv_button_text = 'Delete Item'.
lo_function_dpwty->change_text( EXPORTING text        = lv_button_text
                                                       CHANGING std_function = lr_function_std ).

External ITS change button text

We are just implementing ESS 50.4 using WAS 4.7, Portal 6.0, and external ITS.
In the Enrollment IAC, transaction PZ14,
SAP Template Button href=URLPLAN
button=TXT_INFO
iconName=b_info
The button displays the word 'Information' and we need to change that word. Where does one change the text for a button on external ITS?
I have tried SE93.
Thank you,
D. Maupin
University of Kentucky

Hello Donna,
normally the button texts are set by the application. But did you try to override it by providing the parameter buttonLabel="something" to the function that renders the button?
With best regards,
TJ

Bold Button Text

Merry Christmas everybody,
My menu_bar has lot of buttons with different text captions
(of course)
and each one (text) depends from a var defined on main
actions page.
So, the button text was made with a bold property and when
the movie is
loaded, it appears like normal text (no-bold) Why it loses
his properties?
Thanks in advance...

the easiest (and not very elegant way) is to add textfields that contain those fonts (and embed them). you can remove your textfields from the display list or otherwise, make them not visible on-stage.

Superimposed Button Text

Similar Messages

Maybe you are looking for