Superkey shorcuts work, but not with F keys (Gnome)

In gnome shorcuts it appears (mod4+f3) for example, but it doesn't do anything. If I choose only f3, it works fine.
And mod4+d works (shows desktop). Since I can't get my Fn+F3/4/10 keys to work, i wanted the next best thing

WonderWoofy wrote:..................................
You need to be much much much more explicit about what you ahve going on there.
Sorry for the lack of info... but didnt know where to start with listing stuff I have....
How are the volume keys setup? -> Kernel picks them up automatically, as they worked "out of the box"
Do they register as XF86Volume* keys which you have set yourself? -> As above, I didn't set them
Or are they automatically handled by some kind of kernel module? -> Kernel
If they are done by the kernel module, what kind of machine do you have? -> Samsung Series 3 Intel Core i5 6gig ram, with openbox wm.
What is the module in question? -> Unsure how to find this out, but I haven't loaded any additional modules specifically to handle it
If you have this set up manually, what kind of command do you have set to it? -> NA
Do you use just alsa, or do yuo use pulseaudio as well? -> Just Alsa
My screen brightness controls are in a very similar set up on Fn + F2 and Fn + F3, but these work perfectly from the moment I get past grub.

Similar Messages

My iPad cannot connect to my internet. the internet is working but not with my ipad.

my iPad cannot connect to my internet. the internet is working but not with my ipad.

Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP

Satellite L850-17K: Flashcards working but not all FN keys are available

Hi everone,
2 days ago I reinstalled Windows 7 (64-bit) on my Satellite L850-17K.
I succeeded in reinstalling all drivers, however I have had some problems with my function keys.
After a long search on the internet I found the flashcards utility, but now I only have like 4 flashcards showing up (brightness, touchpad, mute, wireless) But only the touchpad and mute function are responding. Before reinstalling Windows I also had a function for screen output which is also not shown/responding.
The flashcards I do have also don't look the same as before.
Anyone got any suggestions on how to fix this problem?
Many thanks!

Hello
According notebook specification your Satellite was delivered with WIN7 64BIT Home Premium so I don't understand why you don't use this recovery image that includes all necessary drivers, tools and utilities.
Anyway, if you want to have own OS version all stuff can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp
What you need to install is Toshiba Value added package and all other Toshiba specific tools and utilities.
> The flashcards I do have also don't look the same as before
How to understand this?

External hard drive works, but not with a docking station

hello,
I'm finding it difficult to use my docking station with my WD Cavier Green 2TB hard drive.
I know that the hard drive is in perfect working order as it still works with my many different leads and cables i have. But when i plug it in to my docking station i get the "unable to read' message.
I've checked disk ultility and the hard drive is there but the second name down reads disk1s1 and is greyed out.
I've read through the countless discussions and opend the ownership (when i plug it in with my many cables) but when i use the dock it claims there's no ownership.
I've tried verifying and repairing but an error message appears.
I've tried turning off the hard drive and docking station and turning it back on.
I've tried restarting my comuter.
And i've tried using a different cable.
it just seems odd that a docking station could stop my hard drive being recognised yet plugging it with many cables is fine.
Is it simply a case of my hard drive not being fully compatible with the docking station? or am i missing something?
Below is all my specs.
MacBook Pro
Mac OS X Lion 10.7.5
Hard drive
Western digital Caviar Green
WD20EARS 2TB
docking station
Akasa DuoDock S
USB 3.0
model number: AK-IC08U3-BK

Hello, I am having a similiar problem. I had an old MacBook that died so I took out the partitioned HDD and put it in an enclosure. The other day I plugged it into my other MacBook and both HDDs appeared (Mac and Bootcamp) but today only Bootcamp will appear. When I run the commands recommended above, I get this:
It appears as if there are two traditional hard drives? The first and second line? I'm not very Mac savvy so I don't know how to use the chflagg command to make these visible. Ultimately, I want to complete wipe this entire HDD (partition included) so I can have it fresh. Can anyone advise on how to make the Mac partition visible or how to complete wipe it and start fresh?
Thanks!

Playing dvd's on my laptop works but not with the apple tv viewer. What's going on?

My macbook pro with retina display works great when viewing dvd's with a usb DVD drive. As soon as I connect to the Apple Tv viewer the screen goes grey on my lap top and on my tv. What's going on?

if it worked it would be breaking the law
dvd's and blueray for that matter have an encryption which airplay would have to remove for it to work and thats not legal
to do some people report that some version of the vlc player works with airplay but that would mean they break the encryption before displaying it on the mac screen and as such break the law

Videochat and Screensharing working. but not with ONE person

ok this is a tricky one. i have a mbp. my father has an imac and various friends have mbps or mbs.when i'm at my parents home ichat av between me and my father is no problem. (so far ok, because it is intern).both, my father and i are able to videochat with everyone from MY PARTENS HOME.
when i'm back to my apartment, i can chat with everyone, except my father! now to the interesting part. if i ask a friend to start videochat and invite my father we're both in. so the problem basically is the connection between us. when someone other is host, there's no problem.
i double checked my network connection and the network connection at my parents home. but i was always able to chat with everybody, but my father. when i was in holiday i had the exact same problem, just to stress out, that i'm not too stupid to set up the network/ports. in fact ichat av is currently working without even mapping a single port.
so has anybody ever had a similar problem (i already contacted my apple retailer=never heard of something like this).
to sum up: ichat av working in both homes without any problems. the only thing not working is the connection between my mbp and my fathers imac.
thanks a lot
jacques
Message was edited by: Jacuqes

Hi,
On the first post I would have said it is about the way you routing device is doing NAT and your father's and your not liking the way the other is doing NAT
See this older bit on my Web Pages http://www.ralphjohns.co.uk/page15.html#CertainBuddy
From there....
(I am Presuming you are using your same Screen Name ?)
Edit: see bottom first.
I would cross check the port in iChat > Preferences > Accounts > Server setting tab on both the test Mac User and your normal Mac User account.
Even if the Test Mac User account is using port 5190 then make sure the Normal Mac User account's iChat is.
If 443 is the successful one try that.
Also look at whether it is using the SSL option to login.
I would also check System Preferences > Security > Firewall on both as a comparison.
iChat only works if Allow All or Allow Specifics and iChat is added to the List (it is not considered and Essential)
Then go to System Preferences > Network and see if the DNS servers are being shown on the Normal account when they are on the Test one.
In the Normal Mac User's Account iChat check that in the Video menu the Camera Enabled item is ticked and that Screen Sharing is Allowed.
The camera is enabled by default but might have got changed.
As you wanted to Screen share you may have turned it on in the Test Mac User's iChat.
Deleting the .plist com.apple.ichat.plist would have deleted any Screen Sharing setting in the Normal Mac User.
Back to System Preferences > Network.
Is there any chance that the two (Mac User)accounts are using different IPs from your Modem or router ?
In System Preferences > Sharing on the Normal Account check that Internet Sharing is Off.
On reviewing this post before posting this actually seems the most likely.
9:01 PM Tuesday; August 12, 2008

Access to NAS - Error -43; with tiger it worked but not with leopard

Hello,
I've got some problems with an NAS Storage device.
While my iMac was running under tiger i coud access without any problems.
After upgrade to Leopard i can not access the drive.
(Same problem with my macbook).
Using my old, ugly windows-pc i still can access.
I browsed across the forum but did not find a useful answer.
any hints?

Hiya,
first of all, an apple error "-43" would mean:
"File not found; Folder not found; Edition container not found; Target not found"
(this is from apple document http://support.apple.com/kb/HT1618)
In your case, I assume, the computer cannot find your NAS
Also, there was another discussion and it looks like, this might be a Leopard issue:
http://forums.mactalk.com.au/33/38868-leopard-nas.html
Hope this gives you a start (I entered "nas error apple" into the www.google.co.uk search engine).
Hope you can sort it.

Email working, but not with BlackBerry

Hi everyone,
I have come across quite a strange problem, after some extensive research I can not find any solution so I have come here to ask if anyone can provide any answers to this.
I have my own email address [own domain] and it is working fine, receiving emails/sending emails and it is working with my desktop etc. apart from my BlackBerry - I enter the BlackBerry Email Setup and enter all the details of the email, and it says
"Email address domain not found. The email address *** cannot be found. Please veryify this..."
I have checked the domain and the DNS Zone/MX Records - all seem to be fine (apparently) as the email works with Outlook and I can access webmail fine...
This all started a week ago, I do not know why!
Solved!
Go to Solution.

Qutie honestly, it may work later. I've seen this odd behavior before.
Just try the setup again later. If after 48 hours it doesn't let's look again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe Flash plugin works, but not with YouTube

The Adobe [http://example.com test site] works fine and shows: "You have version 11,2,202,236 installed" but going to any YouTube video displays "An error occurred. Please try again later."
Vimeo videos play fine.
Running Chromium, both YouTube ''and'' Vimeo videos play fine.
Operating system: Ubuntu 12.04 (Precise)
Firefox version: 14.0.1

Hi TuxLove,
same OS and browser here working fine. Restricted-extras installed?
$ sudo apt-get install ubuntu-restricted-extras

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

ESR,ID working with 8000 port but not with 50000

Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
Naveen

Hi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Superkey shorcuts work, but not with F keys (Gnome)

Similar Messages

Maybe you are looking for