Superscript becomes # in CONVERT_OTF output PDF
Hello,
As the subject says, units of m2 (2 in superscript) becomes m# when converting OTF to PDF.
Does anyone have an idea how to fix this, I looked into note 1012515, but it's already implemented.
Thanks!
Hello, Märten,
you might need to look at the note 1561554. As I understand, this note corrects superscripts and subscripts symbols also. Maybe I'm wrong.
Therefore, you want the system to also use these Adobe fonts to output the special characters during the PDF conversion for Unicode/cascading fonts (see Note 999712)
Similar Messages
-
How to remove the extra space in the output pdf file?
Hi All
In our RTF layout template we have both static content and dynamic content.
In RTF template we have used many if-else,choose,For each loops.
On the account of that,In the output pdf file, we are getting lot of empty space in the place of that coding(if-else,choose,For each loops).
Is there anyway to reduce the space in the output pdf file?
Please suggest some ideas.
Thanks in Advance.White space is NOT your friend!
Make sure you don't have any unwanted whitespace between commands and especially tagged on the end of lines. Chain your commands together with no whitespace and let them wrap, do not enter carriage returns.
Cheers,
Dave -
How to generate multiple output pdf's from one oracle reports
how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?You can better post your question in the reports forum instead of this pl/sql forum.
-
Pages 5.5 output PDF is not have pages number interlinkage ,why?How to deal with?
pages 5.5 output PDF is not have pages number interlinkage ，why？How to deal with？
pages 5.5 output PDF is not have pages number interlinkage ，why？How to deal with？
-
Placed .png files in look blurry in InDesign CS6 & output PDF
I'm brand new to InDesign...just learned it yesterday. I'm using CS6. However, I think I'm following best practices as I've watched many instructional videos and have a folder of images I'm using in the document which I place in the document using "File" -> "Place." I've both put them into frames that already exist (and used "Object" -> "Fitting" and often "Fit frame proportionally" but also other commands) as well as without a frame where I drag a window the size I'd like the file to be after I've loaded up my cursor using "File" -> "Place."
I'm at a loss as my files are 72 DPI and 144 DPI (I'm on a Mac and have checked them out both in Photoshop and using "Tools" -> "Inspector" in Preview) and I have NO idea why they look so terrible in both InDesign and my output pdf! I'm attaching both the files I'm placing and screenshots of what they look like in the output .PDF.
Thanks SO MUCH for any help anyone can give me--I'm working on an urgent project and must figure this out!This info was quite helpful--thanks everyone!
First of all, I'm not entirely sure I chose the right tool for this job, and advice on this would be welcome. I wanted a document of portfolio pages formatted sort of like a book, so I thought it would be better to use InDesign rather than something like Photoshop or Illustrator (I've learned these tools in the last year but haven't really used them to create documents). My primary goal, however, was to present this information both from my computer and on my website, and a secondary goal was for it to be able to print nicely. So I thought InDesign was the right choice. (I read this article from 2010: Adobe Photoshop vs. Illustrator vs. Indesign | Dream Infinity Studios / Chris Takakura | Art Direction + Design to get some guidance...hopefully most of it is still relevant.) Because of that I wasn't sure whether to use "Intent" -> "Print" or "Intent" -> "Web", so I went with web with a 1024 x 768 page size, hoping that will look OK for desktop (not professional) printing. What do people do when they want something to function in both domains? Not sure if that could have affected anything about the way these images were placed...
In terms of finding a solution:
1. I was using High Quality Display--it was more an issue with my output document. (Though strangely sometimes when I toggle between high-quality & typical displays, sometimes things that looked good when I was working on them in high quality, after toggling to typical and back, look horrid.)
2. It seemed at first that it might be an issue of the way I placed the files, e.g. I was positioning my cursor OUTSIDE any sort of field and dragging a square to the size I wanted my image to be. I'm wondering if it somehow reduced the image size because if I create the square using the "Rectangle Frame Tool" it seemed to work much better. I've also tried just dropping the file without the frame tool and resizing it that way, but my images are actually VERY long & wide, so that's difficult. I was also wondering the "fitting" option I chose may have been affecting the display...I've been trying "Fitting" -> "Fit Content Proportionally" lately.
3. I created some .pdfs of some of the pings from Omnigraffle, and that seemed to help, but that actually makes them look worse because there are screenshots within the OmniGraffle mock-up files which are washed out and pixelated and the text that was added on top stands out too much (see attached screenshot...the one on top is a PDF and the header and footer looks funny and the bottom is a PNG where at least everything looks consistent).
So though some files look better now (especially, ironically enough, the 72 DPI screenshot of Use Cases!), I can't figure out what process I should follow to get consistently good results. Because a) the mockup files look good when I first paste them, and b) they are longer and wider than the content area I'm using and I'm shrinking them significantly, I cannot figure out why I can't keep that level of detail after they've been shrunk to fit. I keep wondering if I'm placing image properly, shrinking them properly, or those Fitting settings properly... -
How to Create a Rich Dynamic Input and Output PDF to insert and get data into, from Database (MSSQL)
HI ,
I want to use Adobe LiveCycle Designer and Adobe LiveCycle Workbench features to create a Dynamic PDF form which can allow me to store data into database(MSSQL Server) and Can also provide me the Output PDF form with all the information which has been been filled in by the User in input form. Both Input and Output forms must be Dynamic. I am stuck in this process and Need Experts Advice on the Complete optimal process flow of the Adobe.
Regards
Ritesh GroverHI
Go to the lay out of your screen and doublr click on the table control fields, you can get the Properties/Attribute of the screen or table control Fields
Assing a Group GRP1 for all the fields i n the table control.
in PBO
if ok_code = 'INPUT'.
LOOP AT SCREEN.
IF screen-grp1 = 'GRP1'.
screen-input = 1.
modify screen.
endif.
ENDLOOP.
elseif ok_code = 'OUTPUT'.
LOOP AT SCREEN.
if screen-grp1 = 'GRP1'.
screen-input = 0.
modify screen.
endif.
endloop.
endif.
Regards
Ramchander Rao.K
Edited by: Ramchander Krishnamraju on Aug 8, 2009 5:27 AM -
I created a quiz.
Created an internal server on my compute rising a MAMP.
When I publish my quiz using the multi-file publishing options...
I am able to use both the "HTML" and the "swf" output files to complete a quiz and reporting the results to the quiz results analyzer.
However, I am unable to get the output .pdf field to reporting to the quiz results analyzer.
Any help? Would this issue have to do with the Acrobat Professional setting? Captivate setting? My internal server setting? or output fuel placement?
I tired to put the .pdf file in the same MAMP root folder location as my "internalserverreporting.php and internalserverread.php files.
Thanks for the help.Hello Varun,
You cqan submit the report as a JOB and export the out put to memory, once the job is complete you can read the list to display the output.
Cheers,
Mano
Cut & Paste form SAP help.
Submit report ....
EXPORTING LIST TO MEMORY
Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST". -
I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.The Acrobat SDK might be a starting point.
From there, perhaps a plug-in (built with C+).
Perhaps with a licensed release of a PDF Library (this could be $$).
The viable and cost effective alternative is use the tried and true.
Authoring in an appropriate authoring application with appropriate tag management.
Example: Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
This way you place "Alternative Text" when mastering content in the authoring file.
Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
Regardless, here you have a sub-forum for discussions on Acrobat usage.
Consequently discussions on/of 3rd party software is rather out of scope eh.
Be well... -
SAP Digital signature solution in Invoice output PDF document
Hi,
We are trying to POC SAP Digital signature solution for Invoice output pdf document based on the OSS note 700495 implemengtation guide.
- Defining the log structure and database table.
- Defining signature single step and authorization group and assignment.
- Completed the configuration steps including system signature with authorization by SAP user id and password.
- Release strategy and Archiving NOT implemented for this solution as they are not required as of now.
Checked the above settings using DSIG_BOOKING_EX sample program and the same executed successfully without any errors and we can see the result 'Signature process was successfully completed by user XXXXXX'. Also we can view the signature log in DSAL Transaction.
Similar to the sample program code, Implemented the signature call in user exit ZXMCVU05(EXIT_SAPLMCS6_001) for Invoice output digital signature during VF01 create transaction.
In the process signature call processed successfully but the output PDF document does not have any signature.
Please let me know why digital signature NOT applied to invoice output pdf file. Is there any other process that need to be done?
Also if you have implemented any similar solution, please provide me the details on the same.
Thanks!Ritwika,
Are the User Name and Password correct? Is the User assigned to the SAP_XMII_User role in Netweaver? On the iCommand's Security screen, is the SAP_XMII_User assigned as a Reader role?
Have you checked the Netweaver log? There may be more detailed information there.
Kind Regards,
Diana
Edited by: Diana Hoppe on Mar 3, 2011 9:50 AM -
Output PDF on file system? (EBS)
Hi all,
When you run a BI Publisher report with a concurrent program, is the output PDF stored somewhere on the file system? (Where..) Thanks in advance!
Best Regards, Matilda SmedsThanks for the replies! I had found the out-file (xml file) previously. I wasn't aware that there was a separate table for the final outputs, though it is quite essential knowledge. Also, it is good to know the pdf also resides on the file system. Thanks again, to both of you.
Best Regards, Matilda -
MG3100 scanner- can I control digital rights on the output pdf to enable comments?
MG3100 scanner- can I control digital rights on the output pdf to enable comments?
Solved!
Go to Solution.Hi fassettj,
Enabling comments on PDFs created with your PIXMA MG3100 is not supported using the software bundled with your printer. For these features, it is recommended that more full featured PDF creation software is used, such as Adobe Acrobat. For more information, please use the following link:
http://www.adobe.com/products/acrobatstandard.html
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Why does solid black type become screened in my PDF?
I have created a document in InDesign CS3 (5.0.4) on a Windows XP (SP3) system (3 GHz Pentium processor, 3.5 GB of RAM).
This document is composed of solid black text set in the Futura typeface. There is no transparency, opacity effect, or screen value used on the text.
When I export this document to PDF, the sold black text becomes screened to something like 90%. I used "Press Quality" and manually set the color output to "No Color Conversion". I have also set it to convert to destination: US Web Coated. The result is the same: screened text when it should be solid.
I printed the resulting PDF to a Xerox 4510N postscript printer but have seen this problem when working as a pre-press technician working an image setter.
Why does this happen and how do I stop it? Solid black type should print solid black!From what I can see the text is solid black. There is no border color on the vector fonts, but the fill is black. If you zoom in you can also see it as solid black. You may be seeing a pixel issue, related to the zoom you have set and possibly the line thickness of the font. I am not sure what you mean by screened. If you are seeing something that looks wrong on screen, you might consider the smoothing option on the fonts, particularly if you are on a notebook (they tend to show pixels a bit more).
-
Getting Error While Attaching Concurrent Program Output PDF file for POAPPRV Workflow
Hi All,
I am getting the below error when I am trying to attach concurrent program output to the PO Approval Notification.
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 1040589-528378
User Key =945871
Error Name = WF_ERROR
Error Message = [WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: [WFMLR_DOCUMENT_ERROR]' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK=
Wf_Notification.GetAttrblob(3604701, ZZ_PREVIOUS_PO_COMPARE, text/html)
WF_XML.GetAttachment(3604701, text/html)
WF_XML.GetAttachments(3604701, http://oraerp.am.corp.xxxx.com:8099/pls/DEV, 11283)
WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
Wf_Event.setMessage(oracle.apps.wf.notification.send, 3604701, WF_XML.Generate)
Wf_Event.dispatch_internal()
Error Stack =
Activity ID = 190844
Activity Label = AL_NOTIFY_APPROVER_PROCESS:ZZ_PO_PO_APPROVE_ATTCH
Result Code = #MAIL
Notification ID = 3604701
There are several threads for this error however I cannot find any specific solution to the problem.
Please find the code below -
wf_engine.setitemattrdocument(itemtype=>itemtype,
itemkey=> itemkey,
aname=>'ZZ_PREVIOUS_PO_COMPARE',
documentid =>'PLSQLBLOB:zz_po_reqapproval_init1.xx_notif_attachments/' || to_char(l_request_id_prev_po)||':'||to_char(l_document_num));
-- here l_request_id_q_and_s is the request id of the program and l_document_num is the PO document number
PROCEDURE xx_notif_attachments(p_request_id IN VARCHAR2,
p_document_num IN VARCHAR2,
p_document IN OUT BLOB,
p_document_type IN OUT VARCHAR2) IS
v_lob_id NUMBER;
v_document_num VARCHAR2(15);
v_document_prefix VARCHAR2(100);
v_file_name VARCHAR2(500);
v_file_on_os BFILE;
v_temp_lob BLOB;
v_dest_offset NUMBER := 1;
v_src_offset NUMBER := 1;
v_out_file_name VARCHAR2(2000);
v_conc_prog_name VARCHAR2(500);
v_conc_req_id NUMBER;
CURSOR get_output_file(p_concurrent_request_id NUMBER) IS
SELECT cr.outfile_name, cp.concurrent_program_name
FROM fnd_concurrent_requests cr, fnd_concurrent_programs_vl cp
WHERE request_id = p_concurrent_request_id
AND cp.concurrent_program_id = cr.concurrent_program_id;
BEGIN
-- set_debug_context('xx_notif_attach_procedure');
v_conc_req_id := to_number(substr(p_request_id,
1,
instr(p_request_id, ':') - 1));
v_document_num := substr(p_request_id,
instr(p_request_id, ':') + 1,
length(p_request_id) - 2);
OPEN get_output_file(v_conc_req_id);
FETCH get_output_file
INTO v_out_file_name, v_conc_prog_name;
CLOSE get_output_file;
v_out_file_name := substr(v_out_file_name,
instr(v_out_file_name, '/', -1) + 1);
v_file_name := to_char(v_document_num) || '-Previous_PO_Rev.pdf';
utl_file.fcopy(src_location => 'APPS_OUT_DIR',
src_filename => v_out_file_name,
dest_location => 'PO_DATA_DIR',
dest_filename => v_file_name);
-- v_lob_id := to_number(v_document_id);
v_file_on_os := bfilename('PO_DATA_DIR', v_file_name);
dbms_lob.createtemporary(v_temp_lob, cache => FALSE);
dbms_lob.fileopen(v_file_on_os, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(dest_lob => v_temp_lob,
src_bfile => v_file_on_os,
amount => dbms_lob.getlength(v_file_on_os),
dest_offset => v_dest_offset,
src_offset => v_src_offset);
dbms_lob.fileclose(v_file_on_os);
p_document_type := 'application/pdf;name=' || v_file_name;
dbms_lob.copy(p_document, v_temp_lob, dbms_lob.getlength(v_temp_lob));
EXCEPTION
WHEN OTHERS THEN
wf_core.CONTEXT('ZZ_PO_REQAPPROVAL_INIT1',
'xx_notif_attachments',
v_document_num,
p_request_id);
RAISE;
END xx_notif_attachments;
Please help me find a to the above mentioned error.
Thanks,
SuvigyaThere are two ways to look at what error the PLSQLBLOB API is throwing.
1) Call your PLSQLBLOB API GNE_PO_CREATE_FILE_ATTACHMENT.Gne_Create_File_Attachment directly from a PLSQL block and verify that it returns the BLOB data successfully.
You could also call another WF API that in turn executes the PLSQLBLOB API internally. For example,
<pre>
declare
l_document blob;
l_doctype varchar2(240);
l_aname varchar2(90);
begin
dbms_lob.CreateTemporary(l_document, true, dbms_lob.Session);
-- 207046 - This is the notification id of your failed workflow
-- PO_REPORT - Document type attribute
-- 'text/html' - Content Type being generated for
Wf_Notification.GetAttrBLOB(207046, 'PO_REPORT', 'text/html', l_document, l_doctype, l_aname);
-- Print the size of the document here to verify it was fetched correctly
end;
</pre>
2) Turn on log for SYSADMIN user with following attributes.
Log Enabled = TRUE
Log Level = ERROR
Log Module = wf.plsql%
Restart the Workflow Deferred Agent Listener and Workflow Notification Deferred Agent Listener and run your workflow process. Search for log messages written for above context and you can identify the error at wf.plsql.WF_XML.GetAttachment module with message starting as "Error when getting BLOB attachment ->"
Hope this helps.
Vijay -
Unable to open PDF output (PDF downloaded from Interactive Report--APEX)
Hi,
I'm getting below error while opening a PDF file downloaded from an interactive report (APEX).
Adobe reader cound not open "TEST.pdf"because it is either not supportd file or because the file has been damaged.
Thanks & Regards,
Ramamuni.Steps of pdf Printing of Report from FOP:
1) Download and unzip the following needed files in D:\Apex_fop directory.
2) Open your command prompt .
Change the directory to D:\Apex_fop\cocoon-2.1.11.
Set the Java_Home environment variable as: set JAVA_HOME= C:\Program Files\Java\jdk1.5.0_21
then type build war
3) After getting the prompt back as D:>Apex_fop>cocoon-2.1.11>
Copy coocon.war file from the folder D:\Apex_fop\cocoon-2.1.11\build\cocoon.
Paste this file into webapps subdirectory in main tomcat directory having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps.....place it in the top
level of webapps directory.
4) Now just startup tomcat as D:>APEX_FOP>apache-tomcat-6.0.26>bin>startup.bat
The cocoon.war file will automatically uncompressed as directory.
5) To change the port of apache tomcat , edit apache-tomcat-6.0.26\conf\server.xml & change port attribute of Connector element from 8080 to 8181.
Just check whether Tomcat is running or not as http://localhost:8181/
& to check cocoon type http://localhost:8181/cocoon/
6) Now copy fop_post directory & paste it undes new cocoon directory in webapps having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps
\cocoon.
7) Now you need to do some apex settings as follows:
In APEX, just log in as ADMIN into apex/apex_admin and went to Instance Settings and did the following:
- Print Serverr: Standard Support
- Print Server Protocol: HTTP
- Print Server Host Address:localhost
- Print Server Port: 8181
- Print Server Script: /cocoon/fop_post
In your APEX application, in the Regions section, Click on the Print link next to your report and do the following settings:
- Enable Report Printing: Yes
- Link Label: Print
- Response Header: Report Settings
- View File As: Attachment
- Output Format: PDF
- Report Layout: Default Report Layout
- Print URL: f?p=&APP_ID.:1:&SESSION.:FLOW_XMLP_OUTPUT_R1063230002781575
8) Open up the Report Page and click Print , You will get the pdf report.
I am sure this will help you
Regards -
How to publish report output (pdf via XML publisher) on public OAF page
hi,
I need publish pdf file (report created with XML Publisher) over link on OA page on external web, but without accessing people from public web into my output directory for concurent requests (only this one to be allowed to access from external web) ....sorry, i am late, i couldn't reply on forum ...
first i submit concurent request to create xml output from report (rdf):
ConcurrentRequest cr = new ConcurrentRequest(pConncection);
requestId = cr.submitRequest(applnName, Sablona, Description, null, false, cpArgs);
i am wait for end:
while (FileName == "") {
FileName = getOutputFileName(pageContext,requestId);
getOutputFileName make select to get status of request from database,
and on finish i delive pdf document to customer with oracle.apps.xdo.oa.common.DocumentHelper:
String redirectURL = DocumentHelper.getOutputURL(pageContext,
"XXCS", //appShortName,
Sablona, //templateCode,
(InputStream)dis,
"PDF", //outputType,
properties,
"CS", //language,
"CS" //territory );
pageContext.forwardImmediately(redirectURL, null, (byte)0, null, null, true, "N");
i hope it help you ;o)
Maybe you are looking for
-
I am looking after 20 ipads each with their own itunes account. Am I able to have more than one itunes account on my computer so that I can sync these ipads when necessary. We don't always buy our songs on itunes. Sometimes we buy the cds and downl
-
Flashing black screen hp pavilion dm4
For a few weeks/months (since mid august) now my laptop (hp pavilion dm4-2070us) has been flashing a black screen every so often, sometimes repeatedly within a few minute time span or there could be hours at a time that it does not flash. Also, only
-
How to set format for a column in repository
Hi all, i have some columns for which i would like to set a default format of the data directly into the repository. For example, a numeric code is shown as 1.234,00, i want the BM to show by default 1234. Or a date shown as 03/03/2013 04:00:00 AM i
-
Organize Jpeg & RAW in iphoto....edit in PSE 12... back to iphoto as a duplicate.
Is there a simple work flow?
-
Configuration variable for menu changes avoiding server restart
Hi, After editing/hiding a menu item (in coremenuitems()), is there a configuration variable that helps to immediately reflect the same thereby avoiding server restart. Thanks in advance Ramesh Edited by: 845556 on 30 Aug, 2012 1:45 AM Edited by: 845