Superseded error 0x87D00213 (-2016411117) when deploying App on SCCM 2012 R2

I've setup an application deployment that requires install, but I'm seeing this error along with "Failed to uninstall superseded deployment type." The app is suppose to uninstall an older version then install a new version. It works fine on two
other machines.
BTW - I get this error as soon as I hit Summarize button. I also looked at AppEnforce.log, but it hasn't been updated in over an hour.

Okay, I spoke too soon. I just watched it uninstall old app and install new one.
I would still like to know why it's throwing that error message?
Also, if some users don't have the rights to install this app is there a way I can use a different account for the uninstall and install?

Similar Messages

What is the security context when deploying application using SCCM 2012?

As far as i know when using Group Policy the software is always installed under SYSTEM security context. However i cannot find any information related to SCCM 2012 (and deploying applications) security context.
Also is there a difference in doing "Install for User" or "Install for Device/System"?
Thanks

Thanks. Just to confirm that if you use Group Policy and you Publish the msi for user when the user install it from Add/Remove Programs it is still going to be executed in SYSTEM security context?
And while we are on this topic - is the above (about the security context in SCCM 2012) written anywhere in some official MS web page?
Not sure about the context for Intellimirror, but for ConfigMgr it's as Ronnie and Torsten stated. This may be documented somewhere, not sure. Not everything is documented though -- in fact, I'd say less than 25% (probably less than 10%) of everything
to be known about ConfigMgr is officially documented. Note that this is the same for any product -- there simply are far too many permutations and possibilities to document them all.
Jason | http://blog.configmgrftw.com

Error code 805a0193 when updating apps and install...

Up until Sunday the 12th of August 2012 I have been able to install and update my apps with no fuss. When I tried to install an app on Sunday I got an the error code mentioned above whether through wifi or 3g (for both wifi and 3g my carrier is CELL C) I get the same error message. I have tried to restore my phone software to previous software prior to recent update and even there I get an error code 801812E0. I also tried resetting my phone to factory settings through the phone and this didn't help.
I'm now stuck and I posted the same message on here http://answers.microsoft.com/en-us/winphone/forum/wp7-wpapps/error-code-805a0193-when-updating-apps-... I have not received an answer.
The solutions posted on the site for a similar error relate to a DNS issue with wifi since I am using a cellc 3g card connected to a Sitecom wl-326 router and my Carrier is Cell C for my Lumia 800 i suspect it is an issue with Cell C our the current OS update.
Please Assist
Country: South Africa
Carrier: Cell C
Phone: Lumia 800 phone
OS version: 7.10.8773.98
Firmware version: 1750.0805.8773.12220
Hardware revision number: 112.1402.2.4
Zune Version: 4.8.2345.0

I'm experiencing the same problem on my Lumia 800 (as well as my girlfriend on her Lumia 710). The workaround is to set your router to use Google's DNS settings (8.8.8.8 and 8.8.4.4), further details here: http://answers.microsoft.com/en-us/winphone/forum/wp7-wpapps/marketplace-download-error-805a0193-ove...
I've tried it and it works but something still needs to be done about the problem itself.
I doubt there is anything Nokia can do about this sadly....

Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center

What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
Thanks

Cool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
Mudassar

I have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar

Unknown error 0xE00000C & 0xE00400C when syncing apps

I'm trying to resync older version apps for my itouch 2gen from itunes but I get a unknown error 0xE00000C & 0xE00400C
My parents told me about how the older version WPTV news app was bugged or hacked (not sure which), I deleted and when I go to another app, it completely freeze my ipod. Then when trying to turn it off and back on, I get this iTunes logo /w iPod Plug on screen and somehow, I seen that error before but I waited overnight, same thing.
I just got done restoring the ipod but when syncing the older apps, I get that error on most of my apps I use alot:

Hi there jcole2012,
You may find the troubleshooting steps in the article below helpful.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221
-Griff W.

Lenonvo T440 with Intel SSD SC2BF240A4L - failing to install apps via SCCM 2012 task sequence

Hi there
Wondering if anyone else has encountered this issue with a T440 with Intel SSD hard disk.
Our firm purchased two Lenovo T440 laptops. One has a magnetic hard disk, the other a SSD hard disk. Here are the models:
SSD hard disk: Intel SSDSC2BF240A4L
Magnetic hard disk: 500Gb 7200rpm HTS725050A7E635
We deploy our Windows 7 build via a SCCM 2012 task sequence.
Building the T440 with the magnetic hard disk was trouble free. I built it repeatedly, and encountered no errors; our core applications installed successfully every time and the task sequence completed successfully every time.
All well and good.
Building the T440 with the Intel SSD hard disk has been frustrating. When I run the task sequence on this machine, 8 times out of 10 the task sequence will fail, either stopping abruplty at installing Oracle Single-Sign On or Appsense agents. When the task sequence fails it is ALWAYS at one of these two apps.
Frustratingly, sometimes the task sequence will complete successfully on this T440.
Given we successfully deploy this task sequence to a variety of different hardware from different vendors, including other Lenovo laptops, I can only guess the Intel SSD hard disk is the culprit.
Has anyone encountred anything like this? I've went through the smsts.log file and other SCCM log files and can find nothing obvious. That this ONLY happens on the T440 with the SSD suggests to me the issues lies in that direction.
I'll swap disks in either T440 to see if the other T440 fails also with the SSD aboard, to see what happens.
Meantime if anyone has any information about this issue I'd be grateful if you coud share.
Thanks
CT

Does the install provide any logging? Does execmgr.log show any other info?
Per the readme, it should be setup.exe.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/girc15ww.txt
Unattended Install
This is for system administrators' use only.
1. Refer to the Manual Install section, and download and extract the file.
2. In the step 11 of the Installing files section, uncheck the checkbox next
to "Install ..... now", and then select Finish to cancel installation.
3. At the command line, execute Setup.exe with the -s option.
Example: [Path where the files were extracted]\Setup -s
Daniel Ratliff | http://www.PotentEngineer.com

Deploying Applications with SCCM 2012 R2 to Server 2008 R2 RDS servers

I'm having some trouble finding some concrete information from Microsoft regarding the deployment of applications to RDS servers using SCCM 2012 R2. There seems to be a lot of conjecture, old information and old wives tales floating around and I was hoping
I could get some information confirmed!
1. MSI installs automatically switch to install mode on RDS servers?
I've seen this mentioned a few times. I've also seen it mentioned that it is only true when running the MSI from the console session manually (i.e clicking the MSI file) not running as SYSTEM as SCCM would usually do. Can someone confirm if they do this
themselves or not?
2. Users still logged in when deploying applications?
Is it possible to deploy an application while users are still logged in? Is this only related to going into 'install' mode and taking the chance that a user will do something that will cause issues? Or is it known to cause issues?
I guess those are the main ones, I'm experienced in SCCM but not with deploying to RDS servers, I cant seem to find any straight answers!
Anyway, thanks in advance!

I've never had large enough RDS environment to use SCCM for app push, but from my experience in managing 2012/R2 RDS and local installs, I never bother with switching to install mode anymore and it works fine. Now if you're skeptical, you can
easily build this into a script that runs as a pre-req to your .MSI as part of the software package in SCCM so it's not a big deal.
As for installing apps while users are logged in, shouldn't be a problem if you're installing a new app., if however you're updating an existing application or uninstalling it, then it may be best to drain that RDS host first of all user sessions then do
the work just to be safe. this also helps avoid reboots.

Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

Hi,
I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
Has anyone had this kind of problem or anything similar before?
I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
Any help is appreciated.
This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
Case Number: 1862659812
UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

Hi Robert,
We seem to be having a very similar issue. Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat. Failure rate was near 95% on our 900 machines. Adobe Support and Karl having been looking into our issues but so far no solution has been found.
Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin. This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
Are you seeing any of the following:
Entries in PDApp.log:
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to find the pdb database.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to get the local payload database handle.
Event Log:
Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Exception code: 0xc0000005
Fault offset: 0x000d7c52
Faulting process id: 0xb40
Faulting application start time: 0x01d072a073861622
Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Report Id: c86d9216-de93-11e4-8284-782bcb99e284
Faulting package full name:
Faulting package-relative application ID:
Installer Log
Indicates it can't find the Media_db. We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db. Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created. Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
  <Applicability Platform="ALL" OS="ALL">
   <Skip>Embedded</Skip>
  </Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

OSD: TS deployed to Vista SCCM 2012 client, reboots then doesn't find network drivers

Hi,
We deploy SCCM 2012 client to a SCCM 2007 Vista pc.
We then deploy a task sequence to install Windows 7.
Everything works fine on a vm, it reboots in winpe then starts the task sequence. On a laptop however, it does not work. F8 shows it does not get an ip address, it seems as if no network adaptor is recognized.
However, the same task sequence works fine on the same laptop when pxe booting + I added the driver to winpe. Didn’t help. Please advise.
J.
Jan Hoedt

I think I know what the root cause is, but not how to solve it.
In diskpart, I can see 3 volumes:
*Volume 0 = D-drive, DVD-rom,
*Volume 1 = no drive letter, partition of 400 GB
*Volume 2 = C-drive, label "Configuratio", type "removable" 4 GB
It should install to the 400 GB drive but it seems that its installing to the removable drive.
Not sure what that is since there is no USB attached. Probably it is the winpe temporarely mounted(?)
The behaviour I have is described
here and is also referring to USB.
=> I guess I have to tell the temporarely mounted drive to be f.e. Z when installing in full OS.
Any idea howto do this?
J.
Jan Hoedt

Email notification status after deployment finished in sccm 2012 r2

We run 300+ server security patch update deployements every weekend with limited human resources to check when a deployment job is finished. Our limited weekend staff needs to run post deployment checks failed deployments . Is there an option in SCCM
2012 R2 to send a email notification once a job is finished?

I haven't taking a Powershell scripting class yet, so this will be kind of difficult to make work for what it is i am looking for. So i have to modify an Application Request script just to get a job done email notification SCCM 2012?
Yes. There is no builtin functionality to send email when deployments have run.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Update an APPX App with SCCM 2012 R2

Hi,
When I update an APPX app, the app has to be closed to successfully update the app with SCCM. With a package, you can force the installation to kill the application, or ask the user to close the application. With SCCM and APPX apps, it's not possible. The
update will just fail when the app is still opened. I couldn't find an option like "Run script X before the update" so I can force the app to close or ask the user to close the app.
Is there a possibility to force the app to close or ask the user to close it before the update process starts? Or do I have to create a package for this instead of using the "Application" possibilities in SCCM?
Thank you.
Regards,
JPvR

You could also look at creating a small PowerShell script around the AppX package to give yourself some more "scripting" options to close the app first. To add the AppX package you can use the
Add-AppxPackage cmdlet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Deploy Smartview via SCCM 2012

I have tried everything - even calling for support which got me nothing!
How do you deploy Smartview via SCCM? What command line works? All their docs S-U-C-K and do not work!

Hi,
Am not very sure of this as i work on Hyperion but not on SCCM. but you can give a try to check with your SCCM team with below command. We have mst developed which updates the registry keys so my command looks like below.
msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" transforms="D:\OraHyperionSmartVw_111210_00.mst" /qb!
if you dont have mst then you can use something like msiexec /i "D:\OracleHyperionSmartViewforOfficeFusionEdition.msi" /qb!
Hope this helps.
Thanks
Amith

Deploy patches with SCCM 2012

Hi,
I have deployed non-security patches using SCCM 2012 for all Office products. However found some of the machines which is installed only Office 2007 still received Office 2010 updates. Is that expected behaviour. Can someone please confirm.
Regards,
Madhan

You might have office 2010 components installed (or viewers).
Where do you see the updates on the clients?
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Superseded error 0x87D00213 (-2016411117) when deploying App on SCCM 2012 R2

Similar Messages

Maybe you are looking for