Supplementary customs declaration and Import code number

Hi guys,
I've a question from my colleagues from export/import...
They are working with the Supplementary customs declaration. Now it can happen that the Import code number change in the time when starting with the declaration and until sending it to the customs authority. So it can happen, that the "old" number is still in the document.
Custom authority say, that we have to send it with the new number. But also if you're in change mode in the Supplementary customs declaration it isn't possible to change the Import code number.
Any idea?
Thank you in advance.
Kind regards
Thomas

Did you already read whats behind the blue info button that is on top of slection screen in VIU4 transanction?
Where exactly do you have the problem in this screen?
Do you have an external file with commodity codes, description ..?

Similar Messages

Commodity code and import code no

hi SAP SD guys,
can any body explains about commodity codes and import
codes number? for what purpose it is used?

when trading internationally, then you need to find the correct commodity code for your goods , so you can fill out the customs paperwork accuratly. the code is minimum 8digit, but can be more. depending on the code you can lookup duty rates and import export restrictions.
commodity code and import code no and HTS harmonized tariff schedule is basically the same and captured in just one single field in SAP. It is used as well for European trade statistics such as Intrastat and extrastat.

Use of Commodity Code/Import Code Number

Anybody using Commodity Code/Import Code Number in MM02 under the Foreign trade tab?
Can you tell me what you are doing with this field?
Thanks,
Joe.

Hi Joe,
Within Europe (the European Community) this field represents the material grouping that is provided by the authorities to report the intra-communitary goods flows (INTRASTAT).
Hope this helps.
Kind regards,
Bart

Commodity / Import Code Number

Hello Friends,
Is there any way we can enter the Import code number with an enduser transaction. I know there is a provision to enter from SPRO.
I am also aware of the method thru VI94, but is there any way we can enter just one Import code with easy access transaction..
Thanks

Hello Jurgen,
Thanks for your quick response.
You mean to say, there is no way an end user can enter the commodity code for foreign trade ? (HSN).
This means it has to be done in IMG ? (with authorization for T Code OMG1)
Regards

Multiple values for Commodity Code/Import code number for Foreign Trade

Hi Experts,
Is it possible to enter the multiple values for Commodity Code/Import code number for Foreign Trade field for plant/country specific data in transaction MM02 using any BADI/User Exit ? If yes, suggest the name of the BADI/User Exit
Thanks,
Narayan

how can one material in one plant have 2 commodity codes? This is not logical.

GTS SCD (Supplementary Customs Declaration) for Export set up?

Dear experts,
I'm trying to set up the SCD for export.
Use: not sending every CD for export transactionally, but grouped, e.g. monthly
Via the menu: Import / Export < Create SCD => there is only 3 possiblities (free circulation, discharge CWH, declaration CWH), these are all 3 related to import no?
How can I set this up for export?
authorization OK
procedure CUSPEX set up for legal regulation CUSBE (export belgium), seems OK,
what can I be missing to set this up?
When this is set up for export, do you always need to use the worklist to group the entries together or can this already be done automatically somehow (eg every export CD gets linked to the open SCD?)
Thanks!

Hi Isabelle,
I wonder if you have misunderstood the requirement? Domestic Issues are not Exports (there's a clue in the name), but instead they remove stock from the Customs Warehouse to free-circulation. So periodically you need to declare those Imports, and that's the purpose of the SCD.
I hope that helps.
Kind regards,
Dave

Custom Column for Project Code Number & Search Box to search Content in Project Server 2013

Hi all,
I want to add a custom column in Project Center view for showing some Numerical Projects codes like 4523, 5248,8956 like that... Each code will represent Project assigned with that code in Project Server 2013. Also let me now if i can add some search box
in Project Center page through which i can search Project Code or Project Name. Currently, provided search bar not working in Project Server 2013.
Need it urgent..Kindly help

Hi,
If you want to add this column in a project center view, be careful to choose a project view in the "manage views" views' list. Also it must be a project custom field and not a task field. As Paul said, we assume that the field with the code exists
and has been previousky created by you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

CUP - custom field and match code

Hi,
is it possible to have a custom field in CUP with a match code to help searching ?
the only two way that i found are dropdown lists for a table from a backend system and free field ( varchar, date, numeric)
thanks
Regards
Aurelien

Hi Aurelien,
You can create custom fields in CUP for the following types.
1 Text type
2 Numeric type
3 Date type
4 Drop down
a) drop down data define in CUP
b) Drop down data coming from backend table.
If you want a request to be associated with a match code that helps you seaching the request later.
Than create an text type custom field and use in a workflow.
While a creating the request define the value of custom field.
Now you can serch request on the basis of the value define in the custom field.
Kind Regards,
Srinivasan

Lightroom not loading custom settings and imported presets when launched

So I read an article about deleting windows temp files and I did so with the intention of bring my computer back up to speed.
The recycle bin has since been emptied.
When I launch Lightroom in Windows XP my previously imported presets as well as a couple other custom settings (ID plate) don't show up. I have to re-import them everytime I launch Lightroom unless I'm opening a previous cataloge.
Any ideas?

Here's my entire process -
1 - load my SD card in to my computer and import RAW files in to a file on my computer and on to an external hard drive.
2 - remove the connection of my external hard drive
3 - Open LR 5 - Import the files I just loaded to my computer
4 - go to develop in LR 5 make my edits
5 - when done or done for the day on my edits - I back up my LR 5 library and close LR 5
6 - To start editing again - I open my LR 5 with the same library I closed the day before and here is where the hiccup comes in.
Files are always in the same location & file names that I named them when I did the initial import to my computer and external hard drive. I have Windows 8 OS.
No, there were not "!" on any of the images.

Exporting custom setting and importing custom setting

Hi, I recently upgrade to another mac pro.
I have custom setting for the mpg2 whitin old mac computer for compressor.
How can I export the setting out from my old machine compressor and import it back into my new machine's compressor?

Great!
thanks,
I have newbie question for you.
I have animation for 720x480 with square pixel, progressive.
I can't figure out how to change the pixel ratio to square (or 1) for mpg2 custom setting, and change 29.98 to 30 frames per sec..
Do you know how?

Jsp declaration and import statement

Hi All
I have some problems with JSP.
I have wrtten a declaration in jsp like this.....
<%@ page language="java"%>
<%!
Date date = new Date();
List al new ArrayList();
public List getList(){
al.add("Hi");
return al;
%>
The List is-> <%= getList()%>
Note that i did not import anything, it gives the output without any compile time/runtime error. How it is happening?
If i write any thing in scriplets.......like List, Date, it is giving compile time error asking to import this.
I am using weblogic8.1
May i get the correct answer for this ASAP?
Thanks and Regards
Kasim
[b]

weblogic includes certain import statements in the JSP page when it is compiled.
That is why u r not getting an error some times!!
Check your weblogic documentation to find more details abt that
But it is better to include the import statements , so the code will work in any server.

Where can I find info on how to add CRM custom fields and import data to them?

Hi all,
I am looking at the Extend CRM option in the V3 view.
Is this new? Or have I just never noticed it before!
Also is there a tutorial on it and info on how to import Customer data into these extra data fields?
Thanks,
Mary

I'm just getting a good reply from online chat about this.
Parikshit: First, go to customers -> Import Contacts (Advanced).
Parikshit: http://rickynath.tk/jing/2012-06-07_0744.png
Parikshit: Next, Scroll down and choose this option: http://rickynath.tk/jing/2012-06-07_0745.png

Custom Snippet and automatic code

How can I add my own custom snippets?
Also, how can I modify the text that is put out automatically by Raptor when creating say for example a package or trigger.
So my custom automatic text for a new package will have my format and also the comments section.

For custom snippets, add this Update Site:
esdev update site
http://osdn.dl.sourceforge.net/sourceforge/esdev/center.xml

Commodity code / Import code

Hi everybody;
I'm trying to use the field commodity code/import code that appears in the article master data, as an import code so that number can determine the custom duties.
If I go to the f1 button in the field it says "Depending on the system settings, this field contains either the commodity code or the customs tariff number (import code number). The customs tariff number classifies goods according to the harmonized system for the description and coding of merchandise and serves to determine customs duties. You must declare this number to the customs authorities for every import transaction."
Which are those settings? I do have the number defined for the country, but how do I or the system differentiate if is using it as a commodity code or an import code?
Thanks in advance.

Did you already read whats behind the blue info button that is on top of slection screen in VIU4 transanction?
Where exactly do you have the problem in this screen?
Do you have an external file with commodity codes, description ..?

Incompletion Check in Customs Declaration

We are upgrading our GTS system from 7.0 to 8.0. When we process outputs in communications tab, we are getting and error as "Executor/Sender not maintained for CD#xxxxxxxxxxx". We Debuged and found that the system is looking for partner function CUSVER (Consigner). At teh same time the document status is also incomplete.
However this error was not generated in 7.0 even though CUSVER was not maintained.
My question is,
1. Has anybody who has upgraded from 7.0 to 8.0 faced this problem of missing partner function or any similar problem?
2. How is the Incompletion check procedure determined for Customs Declarations and does it effect the partner function check?
Awaiting for any early reply,
Thanks & Regards,
Sam
Edited by: sam prabhu on Jul 30, 2010 10:03 AM

Hi,
the check depends on the country (legal regulation) for what you are doing the customs declarations because the partner function is mandatory for customs.
To fix your issue check:
IMG
- SAP Global Trade Services
--General Settings
---Partner Structure
"Define Groups of Partner Functions"
I Have the following settings in my system:
70 CUSVER Consignor 3 Import/Arrival and Export/Dispatch
For the incompletness check please have a look at:
IMG
- SAP Global Trade Services
--SAP Customs Management
---General Settings
Document Structure
Control Incompleteness Checks in Customs Shipments and Customs Declarations
hope that helps.
regards,
Ralf

Supplementary customs declaration and Import code number

Similar Messages

Maybe you are looking for