Supplementry error - general error

Hi I have a problem I had a device lock on it n ever since I forgot my pin I read on sum website that if u type a wrng password 4 more then 10 times it will wipe ur device so I did n after that it stoped making calls n sending sms bt when I leave it of 4 a while everything seems to be fine when I switch it on again its nt my sim coz it works fine in an other device n the network is fine n there's no problem using my social networks. Its jst when I phone n sms sometimes plz help. Thank you

first try those steps in the same sequence :
1- Register your Handheld .
KB00510 : How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
2- Resend your Service Book
KB02830 : Send the service books for the BlackBerry Internet Service
( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
Good luck.
VIA | prince2012 
http://supportforums.blackberry.com/t5/BlackBerry-Bold/email-setup/m-p/2594583/highlight/true#M15664...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

  • Cannot make and recieve calls and messages

    Good Day
    trust that someone will be able to assist phone was working perfectly until yesteday afternoon when i tried to make a call it said call failed as well as recieving it goes to voicemail i have contact my network subsbribe problem not on there side ,when i try and send a message it gives me supplementry error :unknown and general error ,my bis is working perfect as well as everything else just the call failed problem ,,i am practically begging for assistance so anyone that could assist will be much apreciated .oh tried the removing batt while phone on removed sim card put into another phone no problems ..
    thanks

    Hi and Welcome to the Forums!!
    Wow...a tough paragraph to parse with so little punctuation. But, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your wireless service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error while updating decimal places in general settings

    Hii All
             I have got an error while updating Decimal places in General Settings
    Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
    Note : there are no postings yet, a fresh database for a new client
             what could be the possible reason
                                                                 thanks
                                                                         RIYAZ

    Hiii All
          As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
              would be helpfull if there is any other way..
                                                Thanks
                                                         RIYAZ

  • Capture Video FCExpressHD 3.0.1-General Error

    I have an iMac G5 pre intel with 2.5 gb or Ram, My camera is a Panasonic DVG60 it has been capturing video fine until today ( 30 hrs) It is now giving me a GENERAL ERROR when I try to capture video. I can capture files in iMovieHD OK, and import them to FCE, but I need the timecodes to edit as when I shot I recorded specific timecodes and it is 1 1/2 hrs worth of video to edit. I have reinstalled FCE 3.0.1 and still no correction. I also tried to as a suggestion on this group said take out the receipts to QT 7. and I did still no go.

    This article is for FCE2 but it works for FCE3 as well:-
    http://docs.info.apple.com/article.html?artnum=93690
    Ian.

  • The system failed to merge, error code : General Access denied

    The system failed to merge, error code : General Access denied. Could anyone help me on this

    Hi,
    It could be several things, I think it could be a good start with the following page:
    https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
    If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly  the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
    Hope this helps you out.

  • Java.sql.SQLException: General error

    Hi i got this error message:
    java.sql.SQLException: General error
    at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
    at PersonFrame.actionPerformed(PersonFrame.java:1155)
    at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknow
    n Source)
    at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
    at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
    ce)
    at java.awt.Component.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Unknown Source)
    at java.awt.Container.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    my code is:
    while (rs.next())
    String recnumber = rs.getString("Person_ Record_ Number");
    int reccc=Integer.parseInt(recnumber);
    if (Integer.parseInt(FamilyTree.rowselected)==reccc && AddPersonn!=0)
    System.out.println ("record in table "+reccc);
    System.out.println ("record selected "+FamilyTree.rowselected);
    str.executeUpdate("INSERT INTO Person " +
    "VALUES ('"+nameofperson.getText()+"','"+SurnameOfPersonTxt.getText()+"','"+Bday+"','EMPTY','"+DateOfDeathTogether+"','EMPTY','EMPTY','"+phone+"','"+genre+"','"+Country+"','"+FamilyTree.rowselected+"','"+Nicknametxt.getText()+"','"+Filename+"','"+BioFile+"','"+city+"','"+postal+"','EMPTY','empty','"+TimeOfBirth+"','EMPTY')");
    setVisible(false);
    System.out.println(Filename);
    LINE 1155 that the error message says is line :str.executeUpdate("INSERT INTO Person " +
    <<<PersonFrame.actionPerformed(PersonFrame.java:1155)>>>>>
    also note that i didn't include a try statement here (int reccc=Integer.parseInt(recnumber) because recnumber since is created holds the value 5000 so there is no need
    Also the output.. of
    System.out.println("INSERT INTO Person " + "VALUES ('"+nameofperson.getText()+"','"+SurnameOfPersonTxt.getText()+"','"+Bday+"','EMPTY','"+DateOfDeathTogether+"','"+PlaceOfDeath+"','"+address+"','"+phone+"','"+genre+"','"+Country+"','"+FamilyTree.rowselected+"','"+Nicknametxt.getText()+"','"+Filename+"','"+BioFile+"','"+city+"','"+postal+"','"+Causeofdeath+"','"+PlaceBurried+"','"+TimeOfBirth+"','EMPTY')");
    is:
    INSERT INTO Person VALUES ('fgfgff','dfdgfd','2/1/1988','EMPTY','Person Is Alive','null','EMPTY','EMPTY','Male','EMPTY','0560','dasfds','EMPTY','EMPTY','EMPTY','EMPTY','null','null','EMPTY','EMPTY')
    and my table gets only text values...
    Any Help Will Be Greately Appreciated
    Thanks
    Nick .s

    You cannot do two thing at the same time with the same statement (while your ResultSet is open you are making an insert), try using a separate Statement that the one you used for the query for the insert. If that doesn't work, make a new connection, that will do it.
    If you were using a separate statement then I'm sorry, I couldn't tell from your code. I'd had a similar problem and that's the way I solved it.

  • After updating to Firefox 3.6.9, when I click on a link in Outlook email, I get a message which says "General failure. The URL was: .... An error occurred in sending the command to the applicatio." and the link will not open. How can I fix this?

    I updated Firefox yesterday to 3.6.9. When I receive a URL link in an email within Outlook, I cannot open the link in Firefox. As I said in the question, when I click on the link, a Microsoft Office Outlook error message appears which states that a General failure has occurred in sending the command to the application (which is Firefox). I am using Office 2007 This did not occur prior to the upgrade of Firefox.

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • Running AP transfer to General Ledger: Complete with Error

    Below is the error I got while trying to run : AP transfer to General Ledger and I got Complete with Error:
    Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_selection_type='1'
    p_set_of_books_id='1'
    p_include_reporting_sob='N'
    p_batch_name='jginv'
    p_from_date='2007/01/01 00:00:00'
    p_to_date='2008/12/31 00:00:00'
    p_accounting_method='Accrual'
    p_journal_category='A'
    p_validate_account='Y'
    p_gl_transfer_mode='D'
    p_submit_journal_import='Y'
    p_summary_journal_entry='N'
    p_debug_flag='N'
    p_trace_flag='N'
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    LOG :
    Report: c:\oracle11i\visappl\ap\11.5.0\reports\US\APXGLTRN.rdf
    Logged onto server:
    Username:
    LOG :
    Logged onto server:
    Username: APPS
    MSG MSG-00001: After SRWINIT
    MSG MSG-00002: After Get_Sob_Ids
    MSG MSG-00002: After Get_Company_Name
    MSG MSG-00003: After Get_NLS_Strings
    MSG MSG-00004: After Get_Base_Curr_Data
    MSG MSG-00005: Calling Transfer Request
    MSG MSG-00005: After calling Transfer Request
    MSG MSG-00100: Error occured in Insert_Liability_Balance
    MSG MSG-00101: Error Code :-20100
    MSG MSG-00102: Error Message :ORA-20100: File o0059033.tmp creation for FND_FILE failed.
    You will find more information on the cause of the error in request log.
    ORA-06512: at "APPS.FND_FILE", line 396
    ORA-06512: at "APPS.FND_FILE", line 499
    ORA-06512: at "APPS.AP_TRIAL_BALANCE_PKG", line 1252
    MSG MSG-00005: Insert_Liability_Balance Failed.
    MSG MSG-00000: User-Defined Exception
    ERR REP-1419: 'beforereport': PL/SQL program aborted.
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2748532.
    Review your concurrent request log and/or report output file for more detailed information.
    Jon

    Remember that this problem is from Vision training database and not real life productionIt does not matter whether you have a Vision demo database or fresh database installation.
    The APPLPTMP directory does not even exist- Open a new DOS session
    - cd c:\oracle11i\visappl
    - Run envshell.cmd
    - Type "echo %APPLPTMP%", does it return something?

  • Database Error (maybe) while working on User-Role or Assiging a Cloud (Unable to connect to the VMM database because of a general database failure)

    Hi,
    Suddenly I got this error in SCVMM 2012-R2 Roll-up 1:
    When working with User-Roles (create/update) or assigning a Cloud :
    "VMM encountered a critical exception and created an exception report....
    search user forums for well-known failure root causes for self-help" (how sweet)... (if it's "well known", why not coding the exception handling correctly?)
    The relevant part of the report might be this:
    "SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again."
    (side question: what does this mean: "Ensure that the SQL Server is ... configured correctly"?
    I can say that :
    SQL is configured by the book, that all services are running (did a reboot of VMM server too) and that all other VMM functions work OK. I don't believe that SQL is only used for user-roles...
    Acting as Domain admin and VMM admin.
    All updates are installed.
    Please find the report @the and and a screen shot attached.
    Thanks for any help.
    Report.txt:
    ------------------- Error Report -------------------
    Error report created 03.04.2014 15:07:56
    CLR is not terminating
    --------------- Bucketing Parameters ---------------
    EventType=VMM20
    P1(appName)=vmmservice.exe
    P2(appVersion)=3.2.7620.0
    P3(assemblyName)=Utils.dll
    P4(assemblyVer)=3.2.7620.0
    P5(methodName)=Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery
    P6(exceptionType)=Microsoft.VirtualManager.DB.CarmineSqlException
    P7(callstackHash)=4c11
    SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again.
    EIP=0x00007ffb74c75a88
    Build bit-size=64
    ------------ exceptionObject.ToString() ------------
    Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again. ---> System.Data.SqlClient.SqlException: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       --- End of inner exception stack trace ---
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    *** Carmine error was: DatabaseFailure (2605); SQLServer; 8144
    [s#5cf2] ExecuteNonQuery()
    [s#5c38] Task`1.SubtaskRun(this: (Task`1#b), TaskID: (guid) 0e1c3e3d-76de-4d8b-bfc2-cbcc400fadf4)
    Full call stack from when the exception was thrown:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
       at System.Environment.get_StackTrace()
       at Microsoft.VirtualManager.DB.CarmineSqlException..ctor(SqlException sqlException)
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    --- SqlException details -----------------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
     Error = 8144
    Index #0
    Source: .Net SqlClient Data Provider
    Number: 8144
    State: 2
    Class: 16
    Server: localhost\SCVMM
    Message: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
    Procedure: prc_RBS_UserRoleSharedObjectRelation_Insert
    Line: 0
    --- Caller StackTrace -----------------
    FileName:; Method:ExecuteNonQuery(); lineNo:0; ilOffset:178.
    FileName:; Method:<AddObjectSharingData>b__14(); lineNo:0; ilOffset:12.
    FileName:; Method:<HandleInsertErrors>b__3(); lineNo:0; ilOffset:11.
    FileName:; Method:HandleInsertErrors(); lineNo:0; ilOffset:6.
    FileName:; Method:AddObjectSharingData(); lineNo:0; ilOffset:312.
    FileName:; Method:AddSharingData(); lineNo:0; ilOffset:23.
    FileName:; Method:AddResourceSharing(); lineNo:0; ilOffset:464.
    FileName:; Method:RunSharingSubTask(); lineNo:0; ilOffset:49.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:23.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:RunNewAndSetUserRoleSubtasks(); lineNo:0; ilOffset:166.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:140.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:SubtaskRun(); lineNo:0; ilOffset:221.
    FileName:; Method:RunInternal(); lineNo:0; ilOffset:112.
    FileName:; Method:Run(); lineNo:0; ilOffset:4.
    FileName:; Method:System.Threading.IThreadPoolWorkItem.ExecuteWorkItem(); lineNo:0; ilOffset:0.
    FileName:; Method:Dispatch(); lineNo:0; ilOffset:162.
    -------- exception.InnerException.ToString() -------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
    --------------- exception.StackTrace ---------------
    at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    ------------- StackTrace from handler --------------
    This is the call stack from where the exception was caught, not where it was thrown.
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    -------------------- Assemblies --------------------
    mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Version=4.0.30319.34011
        BuildType=retail
        Product=Microsoft® .NET Framework
    VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Version=4.0.30319.34003
        BuildType=retail
        Product=Microsoft® .NET Framework
    TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Version=6.3.9600.16394
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Version=6.3.9600.16384
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    WSManAutomation, Version=3.2.7510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.PhysicalMachine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Version=3.2.7515.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UpdateManagement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.RunAs, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.DB.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    --------- Extra Data for Watson Report -------------
    Error Reporting Enabled=True
    *** Extra Data ***
    Process ID = 1500 (0x05dc)
    Managed Thread ID = 25
    Native Thread ID = 1260 (0x04ec)
    Thomas.

    I (quite honestly) am one of those folks that generally do not read the KB articles associated with a patch or UR or SP - as you don't expect details like have been put into this particular one.
    But as Kristian pointed out - within that KB article is the SQL script that modifies / updates this SQL Stored Procedure.
    http://blogs.technet.com/b/scvmm/archive/2014/01/29/how-to-update-scvmm-2012-r2-to-update-rollup-1.aspx
    Needless to say, the feedback was given to MSFT that folks would overlook that this SQL script needed to be run.  So we are just trying to help out.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • NI 845x USB: Error -301713 occurred at Property Node (arg 2) in General I2C Read.vi

    Hello,
    I am currently working  with digital accelerometer LIS35DE from ST Microelectronics. I want to start with tests of this device. For that purpose I used NI 845x USB to connect with accelerometer via I2C. Unfortunately, when I made electrical connections and set up parameters of communication and run the program (I found it in examples) the following error occured:
    Error -301713 occurred at Property Node (arg 2) in General I2C Read.vi
    Possible reason(s):
    NI-845x:  An input parameter, or combination of parameters, is invalid. An example of this error may be setting an invalid baud rate or enabling I2C ACK polling while using 10-bit addressing.
    The code can be found in attachements. I couldn't find any extended description of this problem. What could be a problem: incorrect device address, register address, configuration parameters?
    Any help is appreciated!
    Best regards,
    Michael
    Attachments:
    General I2C Read.vi ‏24 KB

    Hi MicMac89!
    First of all could you please post which version of LabView are you using?
    Could you please tell me which version of 845X hw are you using? (8451 or 8452)
    I opened the example you attached. As you wrote the error occurs at the second argument of the property node. (I guess this is the first property node where the error occurs.)
    This argument of the property node enables the onboard pull-up resistors. But not all NI-845x hardware support pull-up resistors. (Because of this is important to know which hw version are you using.)
    Did you try the example with disabling the pull-up resistors?
    I suggest you to go through the Manual of this product, (if you did this not yet) This could make it clear where and when to use what kind of pull-up resistors.
    For example: If you are using 8452, you must enable pull-up resistors, for Vref ≤ 1.8 V for the FPGA to properly detect a low-to-high transition
    Manual: http://www.ni.com/pdf/manuals/371746d.pdf
    HW specification: http://www.ni.com/pdf/manuals/290598a.pdf
    Please post if my suggestions helped. Of course if you have any questions, don't hesitate to post them.
    Best regards, 
    Balazs Nagy

  • I cannot open the general pane in system preferences. I get a message saying there is an error. Any suggestions

    I cannot open the general pane in system preferences. I get a message saying there is an error. Any suggestions?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Every time I try to open a project in final cut pro it says general error. What do I need to do to make it stop saying this? Please help me.

    My final cut pro software is acting up!!! Every time I try to open a project it says "general error" and the timeline doesn't even show up. What do I ahve to do to fix  this?

    Has it ever worked? What version are you using? Generally the overwhelming suggestion for problems like this are to remove the preferences.

  • Clicking on hyperlink in Outlook causes "General Failure" Error message to pop up in Outlook - but we page does open in Firefox 4.0

    Since upgrading to Firefox 4.0 - every time I click on a link in Outlook, it causes a "General Failure" error message that says, "The URL was:" ... "The system cannot find the fix specified."
    However the site opens fine in Firefox.

    I have same problem and found article below that worked but then i ended up having to do system restore because outlook stopped sending emails after i synced new iPhone while at Apple store that caused problem!!!
    http://answers.yahoo.com/question/index?qid=20080512192747AAHDZtL

  • "General Error" when exporting unrendered clip?

    I have .mov clips in my project that already have an alpha channel in them (format is Animation millions of colors +).
    They're on the timeline in a sequence, with a single transition between them.
    I want to export back to Animation Millions of Colors + in order to keep the alpha channel (this is for Flash video conversion).
    The composite mode for the clips are set to normal, with straight alpha. I can see that the alpha is intact on the clips in the timline by temporarily placing an image on a layer under them.
    I understand that you have to export without rendering in order to preserve the alpha channel.
    However, when I try to export to ANY codec without rendering, I get a dialog that says only "General Error." Rendering will allow export, but of course the alpha channel is gone now.
    I'm running System 10.4.10 with the QuickTime 7.3 upgrade installed, FCE 3.5.1. Did QT 7.3 break something?
    Thanks in advance,
    Steve

    Tom,
    Thanks for your reply. The problem isn't that I didn't use the right codec (I did, as I said in my original post). The problem is that I am not able to export an undrendered clip using any codec. All I get is the "General Error" message.
    Thus no transparency in the exported file.
    Also to clarify, I am not keying the source files to create transparency in FCE. The source files already have an alpha channel in them.
    I have downgraded to QuickTime 7.2, so 7.3 was not the culprit. I have also run the usual system cleanup utilities like AppleJack, etc.
    Thanks,
    Steve

Maybe you are looking for

  • How to Get One MQ Message at a time from MQ Queue

    Hi, Before posting my query here is the configuration I am using:_ Weblogic Server 10.3.3 Soa Server 11.1.1.3.0 Oracle JDeveloper 11.1.1.3.0 Till now I have done the following things:_ 1) created an MQ Queue 2) Producing MQ Messages in the Queue with

  • How can I navigate to a specific target folder when performing a save file command?

    Whenever i click on a Save option for a file, I am eventually presented with a dialog box that gives me a choice of Devices, Favorites and Recent file selections. Which i usually stare at knowing that the actual folder I want the file saved to will n

  • Adobe Acrobat XI Pro Context Menu is missing Windows 8

    Hi there, I've just installed acrobat XI and I found that the context menu (convert to pdf, combine files...) is missing. Does anyone know how to put it back? Cheers!

  • Follow on doc missing from SC

    Hi there, SRM 5.0, SP10, Extended classic scenario, Facing the problem after SP upgrade only. Shopping carts exist that have already been ordered and approved and that have status "Follow-on document created"  However, the follow-on documents are mis

  • Window Freeze

    Hi, We have a list form (listview) that has a child details form. The user selects an item from the list and this instantiates the child window which is populated with a clone of the selected data object. The user is then able to change the details a