Supplier and subcontractor one after another - problem with PR and SchedLines

Hi,
We have following business scenario:
We buy material A from supplier 123 and send it directly to subcontractor 456 from which we received processed part B. Due to logistic cost involved in the process, we receive material A directly at subcontractor 456 and not in our facilities. So we have created a normal LPA-type scheduling agreement for material A and supplier 123 and in the "vendor to be supplied/who is to receive delivery" field (EKPO - EMLIF & LBLKZ) we have put our subcontractor 456.
The problem we have is that even though we have correct subsequent requirements for A and we set the source lists correctly and run the MD02 the way it should be done, the MRP creates only purchase requisitions and not the scheduling lines.
Any clues what can be wrong?
Regards,
Radek

Hi Caetano,
Ok it took me some time, because I had to activate MRP Areas (and since it's done on client level and there is no way back from the conversion, I had to ask for a special server for testing).
I followed pretty much the scenario in the document (except SD and EDI part which I don't need) but I got stuck again.
I have created MRP area for 456 subcontractor and I have assigned it to the A material. The thing is that either I don't understand MRP Areas (it's something new for me) or the requirements are not passed correctly. I mean, I run MD02 for B (with "Also plan unchanged components" and "Display material list" and MRP Area on the plant level) and it plans B and creates planned orders for A (on the MRP Area=plant level). So later I run MD02 just for A with MRP Area 456 (the one I have created for subcontractor) but it does nothing - I don't see any requirements from A (plant level) nor from B.
If I force the requirements for A with MRP Area 456 (by setting Safety stock in material master) it does plan for S.A. (just this safety stock - it still ignores what's in A on the plant level).
These are my settings from MRP Views for A:
On general level
MRP Type: PD
Lot Size: EX
Procurement type: F
In the 456 MRP Area:
MRP Type: PD
Lot Size: EX
Special procurement: 20 (I tried also with special procurment type which they defined in the word document from your link - the one which has U (stock transfer) and plant - but unfortunely the result was the same)
Safety stock: 2000
Any clues on what might be wrong?

Similar Messages

  • I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    Doh! Rectified flash!
    But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

  • I'm using LR5 and have recently had a problem with selecting and deselecting images.  When I click on an image, the adjacent image also gets selected.

    To expand on the problem, I've tried importing a different catalog and I get the same problem so I think the issue is in the application.  Also I've tried using different mice and get the same result.  Do you think I need to uninstall LR and reinstall it?

    First, try rebooting your computer.
    Second, exit Lightroom and delete the LR preferences: Preference and other file locations in Lightroom 5.  On Mac, reboot after deleting.  Sprinkling that magic fairy dust often fixes weirdness in the LR user interface.

  • Encoding and compression in After Effects (Problems with some colors and some effects))

    Hello dear friends,
    I would like to export an openning title video for a movie, which is about 2,45 seconds long and 22 GB (Uncompressed)
    The footage is 1920X1080.
    There are a lot of effects, such as, alpha chanel clips of smoke, explossions and stuff like this.
    When I export it into H264, or Mpeg2,4 or avi or H264(blu ray), I get a bad quality encoding in some parts:
    I get bad quality in the glow effect I have attached to the titles.
    I get bad quality in the clips of smoke (bad color) (tha alpha chanel of the smoke)
    Would you hapen to know why only in some parts I get bad quality and not not in the whole footage?
    Is it maybe because I chose to export the project only in RGB and not in RGB+Alpha, since my project contains alpha chanel data?
    Even if I export the project using Quicktime Animation codec (which is lossless), I get this bad quality (a little better than the previous encodings of course).
    I only get a nice encoding when I export the project with Zero compression, but 22GB for a 2 and a half minute clip, is too much...
    If somebody has any suggestions, I would be interested....
    Thank you!!
    Giannis - Greece.

    Hello,
    I usally export the project totally uncompressed and then I do the final encoding-compression in Adobe Media Encoder but the problem remains.
    I have every preferance to "Best" and "High".
    Yes, I get artifacts...
    About the Gamma problems, where can I select a color profile? In Adbe Media Encoder?
    Thank you!
    Giannis

  • Just updated to Maverick on my IMac and have all kind of problems with Iphoto and Mailbox

    I recently updated my IMac to Maverick and  was not aware of all the problems that came with this update. In Iphoto a lot of pictures disappeared and other are turned upside down other were wrong format. In the mailbox I tried to sort by name of sender to find out that names of sender are not matching the mail. One name that I have had on e conversation with was related to 10 mails with NO connection to him.   Have made all the updates to latest version Iphoto promelem remains.

    Re iphoto, back up first then rebuild the library as follows.
    http://support.apple.com/kb/ht2638
    If you still have problems post in iphoto forum
    There is also a rebuild mailbox option in Mavericks Mail.

  • Songs Skip Forward One After Another/Sporadic and Out of Nowhere

    I have an older IPOD 40g that skips through songs, one after another, without playing anything, and seems to do it in any mode, especially in overall Shuffle mode. I have the "shuffle Songs" feature on, but other than that, it has a pretty standard set up.
    I have restored to the defaults, last week, and it started doing the wierd stuff again today.
    Sometimes I have a hard time getting it to unfreeze and reset as well.
    I appreciate any help.

    Have you tried Party Shuffle? If you control click on a track, you can choose "Play Next In Party Shuffle". I often listen the way you're describing. I start listening in Party Shuffle (which I have set to select from a specific playlist). When I am reminded of another song, I select the song and then choose Play Next in Party Shuffle. And so on.
    As for your second question, you could try moving your entire short playlist into Party Shuffle. Once that playlist was done, Party Shuffle would revert to it's normal selection criteria (you could set it to pull from your entire library or a specific playlist). Music would keep playing.
    Can you tell I like Party Shuffle?

  • Problems with Mail and Safari

    Hi,
    I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
    Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
    In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
    In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
    The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
    One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
    I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
    Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
    Cheers,
    Andrew

    Scott,
    I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
    Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
    Obscure....

  • JMF Play files in a sequence one after another

    Hi
    i developed a JMF based player for playing more than one files in a sequence one after another.
    problem is that it playes all files at same time.
    it should run 2nd file when one file is completed.

    I think time period or state of media will be helpful

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    Just installed Lion and the Magic TrackPad and I am having a problem with one click commands.  I have to hit the pad fairly hard with one finger to get it to accept the command.  Is this normal, is there another way that I am suppose to execute commands?

    No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

  • I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down and dont work anymo

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

    HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • When I try and open Microsoft Word 2011 documents they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens?

    When I try and open Microsoft Word 2011 documents on my  IMAC they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens. The documents open in rapid succession on their own and don't stop until I force close or after maybe 100 or more open I start getting the following message for each document attemting to open "This document could not be registered. It will not be possible to create links from other documents to this document" and then in paretheses the name of the document. After I click okay another trys to open. Any suggestions?

    If you had multiple documents open and quit the app without closing all of the docs first, it will open them again when you launch the app. Open Word, and then close all the documents, you may be asked to save the document, if the document was already saved but you made changes to it before you quit the app, you may need to save the changes first, shorcut ( command and s keys). After you close all of the documents then quit the app and restart the computer. See if this works.

Maybe you are looking for