Supplier Registeration with Questioner.

Hi All SRM GURUu2019s,
I am Implementing SRM 5.5 with SUS and cFolder.
My Question is, when the vendor are registering into SUS, we have to 2 questioner forms.
First we will send 1st questioner to Vendor, and he will fill the questioner and he will send it back, then customer evaluate questioner, If they qualified in 1st questioner again we will send 2nd questioner, If they qualified in 2nd questioner also then only vendor will get register.
How can I do in SRM SUS. If anyone has experience, Please help me to find the solution.
Is there any BADI to use this or If it is development how to do it.
What is Supplier registration questionnaire in SUS- basic settings?. Does it work for me?, to send questionnaire to supplier.
Awaiting for quick response..
Thanks & Regards,
John.
Edited by: johnmiller465 on Aug 13, 2009 7:32 AM

Hi Gurus,
Yes, the OSS helps and we are able to see product location in the Order Forecast details screen.
We are checking Key figure " Supplier Planned Receipt" which supplier will use to modify his plan against customer requirement.
Wondering this key figure is Non Editable for our case....then how supplier will enter his constraint plan?? Any help
Are we missing any customization to make key figures editable/non editable like Planning Book in standard APO?? plz help

Similar Messages

I just reset my computer and my itunes account is not allowing me to do anything unless i answer my security questions. the problem is i never supplied them with the answers they are asking.i don't know what to do!!!

i just reset my computer and my itunes account is not allowing me to do anything unless i answer my security questions. the problem is i never supplied them with the answers they are asking.i don't know what to do!!!

https://expresslane.apple.com/Issues.action

Supply Shortage Report question

Hi
Supply Shortage Report question:
In my cube I have material, 0calday, receipts and demand key figures.
Formula for Supply Shortage = Receipts u2013 Demand.
Users want to see number of consecutive days a particular productu2019s Supply shortage value is below zero.
Input criteria:
Date range:
Consecutive days:
For e.g. If user enters date range as u201C06/01/2010 u2013 07/31/2010u201D and Consecutive days as u201C4u201D they want to see all the products which have u2013ve Supply shortage values consecutively for 4days or more.
Can anyone tell me how we can accomplish this in Bex? Thanks in advance.
Regards
Sree

Hi,
Please check the follwoing option.
Load the msae data in one more DSO which will be a lookup DSO. In that DSO theer will be a daily load with the date as "Historization Date" which will keep the Current date with every load. In that DSO calculate Shortage Indiactor
Shortage Indicator 1 if Receipts < requirement.
By doing this you will be having Data with Historization date (Daily) with an Indicator for Shortage.
Now while loading this cube populate one Chracteritics a Shortage Counter by doing look up theis DSO.
You need to Indicator in the DSO with today's date and historization date and you need to add the counter on the basis of avilable consecutive entries by putting a loop for the same.
By this approach you may achieve your need.
I hope it will help.
Thanks,
S

Does STO create demand in supplying plant with Strategy 40 ?

Hello friends,
In our system, STOs do show up as a procurement elements at the receiving plant, but they do not create a demand at the supplying plant. Supplying plant is using Strategy 40. So my question is - Are STOs supposed to create a demand in supplying plant with Strategy 40 ?
Thanks,
- Chetan

STOs should create requirements in the supplying plant, no matter the planning strategy.
There are though some possible definitions that will alter that, the business case being that you have created PIRs in the supplying plant, and you want these STOs to be included in the scope of your sales plan. In this case, especially with PS 40, STO will not create additional requirements (on top of the PIRs), but rather consume the PIR like a customer order.
Regards,
Mario

Will this power supply work with my PC?

Will this power supply work with my PC? I have a Compaq Presario SR5816F
http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...
http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
This question was solved.
View Solution.

JCGood1984, welcome to the forum.
The computer should take a standard ATX power supply unit (PSU). I suggest measuring the existing PSU and compare the measurements to the one in the links. If the measurements are the same, it should fit. I don't know anything about the brand, however.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Gray folder with question mark - no HD option

Hi there,
having a problem with our imac - running 10.6.8, 3.06 intel core 2 duo, 4gb 1067 mhz ddr3.
Basically the other day the flashing gray folder came up.
We rebooted using a system disc, which made us completly reconfigure the machine - to the point of re-registering again. Then tried to install our mac image but there is no HD available to select from.
Have then tried on numerous occasions to reboot with and without the OS disc with the same response.
Safe boot will not work
Option boot will not work - comes up with a blank screen with no option of selecting a HD.
Have tried to reset the PRAM/NVRAM - does same thing - gray folder with question mark
Cannot enter Single User Mode
Is our HD completly dead or is there any other steps I can do - I have tried to do everything every article I have found suggests, but still nothing.
Any help would be appreciated.
Thanks

Thanks for the reply Mike,
Got an error code: 4sns/1/40000000: TH00-9.000
Dust buildup in the computer prevents proper cooling, so the fans have to work harder.
Corrupted Power Manager chip settings. Go to the Apple support page and search for "Power Manager" "reset" and your specific model. You can get the model number from the System Profiler utility (Apple menu: About this Mac: More Info). If this is the problem, resetting the Power Manager should solve it. If it happens again after unplugging, you may need a new clock/PRAM battery;
Bad temperature sensor (all fans run at high speed);
Shorted fan driver transistor on the logic board or in power supply (one fan always runs at max speed).
(copied form: http://www.fixya.com/support/t18246194-4sns_1_4000000_th00_9_000)
As I havent changed the HD, I reset the System Manager Controller - nothing. Looks like its one of the other causes. I guess I'll have to send it away to be fixed/looked at by our department (and wait a long time for it to come back )
Doesn't quite make sense to me why this would prevent a HD from being shown.
Cheers
Jaron

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Hard drive crash? Folder with question mark

Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
If it is a bare drive like this:
You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

Frequent startup with question mark folder icon--a diagnostic challange!!!

I recently obtained a 500 mhz G4 Cube; I transplanted memory, video board, video riser board, and DVD/CD drive from my old (dead) 450mhz G4 Cube (logicboard and DC-DC board were fried) to the 500 mhz Cube AND I added a Western Digital 80gb hard drive. The problem involves frequent startups with the question mark folder (Mac OS logo alternates with question mark).; Eventually the system folder is found and OS 10.4.11 starts up--sometimes in 20 seconds and sometimes in 3, 4, 5 minutes or longer..........I have tried 2 brand new batteries after numerous PRAM (via keyboard) and CUDA resets (depressing the CUDA button on the motherboard just once and then installing the new battery). The battery terminals in the Cube look perfect--no corrosion. With the new battery, startups were fine for a day but now 4 out of 5 times, I will get the question mark folder. Using Disc Utility, I fixed any errant permissions and the hard drive checks out with zero problems. Once running, the Cube works great, but these startups are maddening. One other issue; if I start up with the G4 Cube 9.1 installation disc, the install program DOES NOT recognize any bootable discs; whilst starting up using the Tiger Upgrade install disc, my 2 bootable discs (partitions of my Western Dig. hard drive) ARE recognized. Any ideas would be greatly welcome!!

I believe I have solved the problem regarding the question mark startup---> after rechecking all cable connections to HD, OD, and logic board, I revisited the jumper setup on the HD; it turns out that I set the HD up to be the MASTER, but what I should have done was set the HD to be the MASTER with attached SLAVE. Since reconfiguring the jumper, all startups have so far been normal. Also, I did install OS 9 drivers, but I the OS 9.1 install disc still does not recognized my 5 gig partition when starting up from the CD; this is minor in retrospect as I can still use the classic mode with a earlier version of OSX that does not hog so much disc space.

Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac

Blue icon with question mark instead of image in email

Sometimes I get a blue icon with question mark instead of image in email, when viewing in Apple Mail Program.
Does anyone know why?????

I'm asking your thread get redirected to the proper forum. Please read this tip on how to post on Discussions for future threads:
http://discussions.apple.com/thread.jspa?threadID=1574700
Is this issue with Tiger or Leopard? Your profile indicates you have a machine with Tiger, yet your signature of your post says you have Leopard.
Also, there is no such thing as a Powerbook Pro. Read the text under the screen to tell us exactly which model you have. MacBook Pro is the name given to Macs that are for the pro lineup of notebooks once Apple shifted to the Intel CPU.
Message was edited by: a brody

Supplier Registeration with Questioner.

Similar Messages

Maybe you are looking for