Supplier Registration Table
Hello,
We have created our own questionnaires at IMG SRM + Supplier Registration + Basic Settings + Create / Change Questionnaire.
Where are loaded this data in SRM?. Which tables?.
Thanks
Hi
<b>Please refer to following SRM Tables</b>
Table Name Short text
TUWS_DATA XML Data
TUWS_DATAT Descriptions to TUWS_DATA
TUWS_FORMSERVICE XML Data
TUWS_FORMSERVICT Descriptions to TUWS_FORMSERVICE
TUWS_LDAPKEY Assignment LDAP Server <-> Technical Key and Variant
TUWS_LDAPKEYLANG Language Table for TUWS_LDAPKEY
TUWS_LDAPVARIANT LDAP Server Parameter Variants
TUWS_LDAPVARLANG Language Table for TUWS_LDAPVARIANT
TUWS_SURVEY Survey
TUWS_SURVEYT Descriptions for TUWS_SURVEY
TUWS_SURVEY_LOG Survey Log
TUWS_SURVEY_PUB Survey Publishing
TUWS_TARGETHIER XML Data
TUWS_TARGETHIERT Descriptions for TUWS_TARGETHIER
TUWS_TAROBJ Survey: Recipients
TUWS_TAROBJ_ATTR Survey: Recipient Attributes
Hope this will help.
Please reward suitable points.
Regards
- Atul
Similar Messages
-
Duplicate vendor check during supplier registration
Hi Gurus,
Does SAP SRM ROS check for duplicate vendor during supplier registration? if it is not done in standard, can it be enhanced to do so?
Thanks and regards,
RanjanHi Ranjan,
Every supplier who registers will have a unique BP number in the ROS client. However checking for duplicacy by name is not supported in standard ROS.
One option is that when a strategic purchaser accepts these suppliers and creates a BP in SRM, he notices a duplicacy and informs the vendor. However this will fail if there is a huge volume of vendors registering everyday.
Possible workaround: When the new vendor fills in the registration form, he provides the name of organisation and this is stored in tables using BAPIBUS1006_CENTRAL_ORGAN. May be you can sit with an ABAP guy and find out in which table this entry sits. You can then have a Z table where you store all these organisation names whenever a new vendor registers and for checking duplicacy you could run a loop through this Ztable Column which stores the name and display a message on 'ROS_SELF_REG' BSP reg page whenever a duplicate entry is found.
PS : Entries like 'IBM' and 'IBM Ltd' will still be created as 2 different entities even though they mean the same.
Nikhil
Edited by: Nikhil RGupta on Jun 21, 2011 11:31 AM -
Supplier Registration without SUS or XI?
Can I do Supplier (Vendor) Registration without SUS or XI? If not, what are my limitations?
I am using SRM server 5.5, and am not using CCM as the supplier directory. I am not using questionnaires. ROS_SELF_REG works. However, I cant notify vendors via email of acceptance. Because I dont have SUS, I cant use SRMSUS_SELFREG and SRMSUS_SELFEDIT, correct? To do User Registration, can I use ROS_SELF_EDIT?
How is workflow WS10000209 (Approving External User Master Record) used?
I appreciate any feedback.Hi Scott
It's difficult to give a reply hre, but let me give it a try...For more details, try the links given above by other friends.
You do not need SUS for Self-registration.
COnfig
1)Create another client for ROS.
2)Create RFC destination for EBP system in new client. Similarly, maintain RFC dest for ROS client in EBP system.
3)Maintain backend systems for ROS system in EBP and EBP system in ROS.
4)Configure some product categories (need not replicate from ERP) to be used during registration.
5)Configure the IMG settings for Supplier Self-registration (they are easy..just go through them once.
6)Configure SCOT settings (check notes 455140) for outbound & inbound mails.
7)Maintain org plan for purchasing org (ppoma_bbp)& vendor group(ppomv_bbp). No need for elaborate org plan like in EBP...just simple org plan.
8) Maintain table BBP_marketp_info (Txn:SM30)
9) Activate ROS_SELF_REG, ROS_prescreen etc ROS services in SICF
10) Maintain client and logon info in ROS_SELF_REG service (SICF)
11) In EBP client, maintain SAP client parameter for role SAP_EC_BBP_ST_PURCHASER for BSP link preselect suppliers (right click and change node details).
12) Maintain catalog call structure settings in EBP client IMG for the ROS supplier directory. The URL shd be taken from ros_prescreen attributes in ROS client.
Process:
1) With the service ROS_SELF_REG, a partner can register. System creates a BP (prospect) in the ROS client.
2) An email is sent to the given email id
3) Fill the attachment and click 'send survey' button. An email is sent to the system and system copies the survey response to the registered business partner
4) From EBP client, click on preselect suppliers. System launches the ROS client registrations listing screen.
5) Check the suppliers registered, check the data and accept/reject the supplier registration
6) Accepted suppliers data can be pulled into EBP through 'Maintain Business Partners' transaction and create supplier (bidder/vendor) in EBP client.
Hope it helps
Best regards
Ramki -
SLC 2.0 - Supplier Registration Enhancements
Hello All,
I'm currently involved in enhancements related to the supplier registration page. I would like to know the difference between the 'Dropdown Box' and 'Dropdown Flexible' standard SFG's. Also i need to know whether we can make multiple selections possible in the dropdown by using either of these standard SFG's or a custom SFG needs to be created for the same.
Any help regarding the same is greatly appreciated.
Thanks!
Regards,
SatishHi Satish,
the standard dropdown has a value table to provide content, the flexible dropdown has a DDIC domain instead.
With both you cannot select multiple items, you will need to create a new semantic field group for this. An instruction for that (including sample implementations) can be found in the customizing guide. -
Query related to supplier registration
Hi,
During the supplier registration process can we rate the supplier based on the questionnaire which they have completed and submitted, means is it possible to convert the data i recieve from the supplier in the questionnaire to numberic format and then decide whether to approve or reject the supplier considering it as supplier rating.
Please advise.
Regards
GGLit would be something like this, Try this
1 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swaptxt
2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans3
3 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swapxml
4 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans2
5 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swappdf
6 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans1
7 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
swapxml -> swap.keyName -> payload-name
swapxml> swap.keyValue> file2
swappdf -> swap.keyName -> payload-name
swappdf> swap.keyValue> file1
trans1> Transform.ContentDescription>file1
trans1> Transform.ContentDisposition>attachment
trans1> Transform.ContentType>application/pdf;name="file1.pdf"
trans2>Transform.ContentDescription>file2
trans2>Transform.ContentDisposition>attachment
trans2> Transform.ContentType>application/xml;name="file2.xml"
trans3> Transform.ContentDescription>file3
trans3> Transform.ContentDisposition>attachment
trans3> Transform.ContentType>application/txt;name="file3.txt"
mail --> mime.contenttype --> multipart/mixed
I have not tried this myself. but it should work -
Hi,
Is supplier registration a separate system all together.
Pls let me know I wan to cinfigure Supplier registarion with MM (SRM isan addon to ERP)
Regards,
ManuWhile accesing the supplier registration screen the following error is displayed:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (wipro statt wipro.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team
Pls advise.
Regards,
Manu -
Supplier collaboration and Supplier registration
Hello ,
Has any worked on supplier collaboration and Supplier registration scenarios .
I need some documents on the above topics.
It would be of great help if some one could send these documents on this .
Regards
JassiHi Jaspinder,
As per ur last mail query.
The Supplier Collaboration and Supplier Registration these two scenarios are comes in the picture when ur talking with Supplier or involving Supplier for the decision making process.
1) For Supplier Collaboration we need to configure PDP with SI and Service Procurement and CCM.
2) For Supplier Registration comes under Strategic Sourcing scenario.
You will get the configuration guide for the same at the Service market place.
Please award the points if it helps u in resolving the issue.
BR,
Vijay Mittal -
I have done all settings as per configuration guide for supplier registration in Strategic sourcing scenario.
When the supplier regiters himself, His registration entry is visible in the screen suppliers application in Buyers account. Here we can also see the registration details with the hyperlink to the registration form.
However in our case the registration form hyperlink is not seen.
Also when the suppliers sends filled questinnair, its not reaching to mour SRM system.
Please suggest, if I am missing any settings
Prashanthi,
please provide contents of this configuration guide. i'm working on th same. may be i can help u where u mis out.
regards,
sashi. -
Questionnaries in supplier registration
Hi,
We have a problem implementing scenario of supplier registration.
When registration system sends to the supplier questionnaries, these are transferred as attachment html in email.
These situation is different from what SAP suggests in configuration guide where
SAP refers to a link at questionnarie and not attachments.
Can you help me, please?
Best regards
EzioHi Ezio
I hope you have seen the latest info from Claudia in this thread.
Modify text mail sended supplier in ROS
Links are possible instead of attachment. I was wrong in previous post.
Best regards
Ramki -
Approve supplier registration for a category
Dear Expert,
We are working with the supplier registration at the SRM 05.
Is there a way to approve suppliers and change it status from "new" to "approve" for a Specific category?
Thank's,
Yaron.Hi Yaron,
You can accept the supplier as a whole, not for 1 specific category.
However to achieve your objective you could enter the approved category in business partner tab (category), so that you know for which category the supplier is accepted.
Regards,
Nikhil -
Prospective Supplier Registration web page
Hi
There is a requirement to use prospective supplier registration webpage to register new suppliers. A URL will be sent to the prospective supplier who on completing the details will submit it. The buying company will approve/reject the details and create the supplier in AP. I have the following queries
1. As per the I supplier R12 user guide there exist this supplier registration page, but i could not find it.
2. If this URL is sent to the supplier how does it tie back to specific operating unit.
3. What configuration is required to setup the above 2 requirements.
i am new to this module, any help on this will useful
Rgds,
AliHi,
In R12 Go the the Navigation:
Purchasing Super User: Setup: Profile Management Configuration: Organization Encryption
Click on Operating Unit and Click on Encrypt.
The system generated encryption key is used for vendor registration.
http(s)://<server>:<port>/OA_HTML/jsp/pos/suppreg/SupplierRegister.jsp?ouid=<encryption string> -
Supplier Registration URL Problem
Hi Experts,
I have a problem with supplier registration URL. I'm implementing supplier registration with SUS(SUS is running in different cilent with SRM). I've implemented all steps.System succesfully creates generic user in sus system for supplier registration and sends e-mail notification to supplier about registration link, user and password.But when supplier enters "http://xxx.xxx.com:50700/useradmin/selfReg?regId=" url , system gives error message " You are not authorized to perform this step. Please contact your system admin". I don't know whether it's the right url or not. I've assigned lots of authorization to this generated user but system gives same error. Also there is a link "http://xxx.xxx.com:50700/useradmin/selfreg_applyuser.jsp?regId= ". When supplier enters this link, system gives error message " 403 Forbidden. You are not authorized to view the requested resource.Details: No details available" Which link should supplier use to create his/her own user in sus system and with which authorization?. Can you please help on this issue?
Regards,
FıratHello Alex,
I'm working with Fırat in this project.At this point,I think that there is a misunderstanding about this issue.In our case,relevant service user has the appropriate rights and also has roles that you suggested.
Our problem is in the user applying part of this integration.We have two SRM systems,not different clients as Fırat said,usage types are SRM and SUS Portal.Two systems have also JAVA instance connected to ABAP instance.ABAP links are working fine for user self registration and preseleciton in SRM ABAP system but SUS Portal's user admin link works and pops up a login screen (mentioned upload protected area)
I found that this is a standard system behaviour of J2EE engine's PUT implementation.SAP says that you can disable this feature but I couldn't disable as mentioned the link below.
Default Implementation of HTTP PUT Method
http://help.sap.com/saphelp_nw04/helpdata/en/ee/987c69583a86468454af894f588347/content.htm
Can you please analyze the problem in this context ?
Thanks for your help in advance.
Best regards,
Alper Ozdemir
SAP R/3 NetWeaver Consultant -
'Supplier Registration' option
Hello,
We work with SRM_SERVER 550, SP12.
We want to use the 'Supplier Registration'. Do I have to use XI (Exchange Infrastructure) to transfer the suppliers from the supplier registration system to the SRM system?
Thanks
Yaron Malka, HPHi,
XI is not required for transferring supplier to SRM. Supplier is transfered via OPI (Open partner Interface).
http://help.sap.com/saphelp_srm70/helpdata/EN/45/e6e7a4ebdc73b1e10000000a11466f/frameset.htm
Regards,
Masa -
Supplier Registration Questions
Hi everybody,
We are on SRM 5.0 and I am trying to implement the supplier registration system. I have 2 questions on supplier registration:
- Is there a way select buyers can be notified when a supplier registers in the registration page?
- We have several new fields that need to be included in the supplier registration page. Is there a easy way (using BADI or otherwise) to show all these fields in the Screen Suppliers transaction?
Thanks in advance for your help!
VenkatHi Venkat
1) No standard option. Need to develop a report.
2) Not to my knowledge. Check ROS_REQ_CUF
Best regards
Ramki -
Supplier Registration Questionnaire
Hi everybody,
I am setting up supplier registration in SRM 5.0. I have couple of questions:
- How is the auto sending of the questionnaire triggerred (SO50 has been setup accordingly)? I got couple of questionnaires auto sent to my mailbox with couple of hours delay yesterday. Today I have not recd any questionnaires for the registration that was done early this morning.
- I want to send the questionnaire only as attachement since we are using Outlook and Send button has not been working since Outlook 2000 (as per note 840661). After reading the note I still cannot find the '/URL/' that the note refers me to.
- Finally when I try to attach a document to a supplier profile in "screen suppliers", nothing seems to happen.
Any help you provide will be much appreciated.
Thanks
VenkatRamki -
Thanks for your prompt response! Really appreciate your help.
1) Everytime I have a new registration I can see the survey questionnaire email is created but it is in waiting status (the count seems to go up). I cannot see the emails in SOST. All other emails (including manual sending of surveys) seem to be processed ok. Any ideas?
2) Resolved.
3) SICF settings have been done. Essentially when I click on the Browse button (in Documents tab) and then click Add button, the screen seems to do something but no attachments show up (in EBP server the attachment shows up at this point). I have ROS and EBP running in 2 different clients. Attachments seem to be working fine in EBP. Is there any Java configuration that needs to be done for the new ROS client for attachments?
Any other ideas will be most welcome.
Thanks in advance for your help.
Venkat
Maybe you are looking for
-
Format Date Range in Select Statement e.b. 4/10/14 - 4/09/15
So far thanks for all the help you've provided me on here. I'm a long time Access developer and have just worked with SQL very little throughout the years but now I'm working full-scale in it, so a learning process for me. I am familiar with the Date
-
Web gallery mod - htlm question
a poster has a couple of gallery variations. one has a Parent INDEX button that is supposed to return to the calling page. if this works, i would be able to combine iWeb front end stuff and Aperture galleries. it works on his site (with a custom firs
-
JScrollPane containing JPanel HELP!
Hi again, I'll try my luck again! Ok, I have a JPanel that uses a GridBagLayout with 3 columns and many rows. Each row is of the form: [JLabel][JTextField][JButton] Ok. Since I have many of these rows, and my application should be a constant size, I
-
How to install the orcale license .(ecc installtion )
hi friends i have dought that how to install the oracle license once the ecc installtion is done i heard that there is no license to be install for orcle is it right ? regards raja
-
Sessions disconnect at 4PM daily after clock went back 1hr
hi, DB in our datacenter is having peculiar issue... all the EM and SQLPLUS client sessions gets disconnected at 4PM GMT every day. it was OK up to Friday 24th Oct......then clock went back 1 hour in UK on 26 Oct Sunday......and this 4PM issue starte