Supplier screening not visible

Hi
We are having SRM 4.0 with SUS installed.
1. In SICF under BSP-->SAP there are 2 services self registration. <b>Ros_self_reg</b> and <b>Srmsus_selfreg</b>.
Which one we should configure for supplier self registration.
We have configured ROS_SELF_REG for supplier self registration. Is this correct? If so what is the significance of SRMSUS_SELFREG.
2. There is no "Supplier Screening" entry in the Menu tab for the role SAP_BBP_STAL_PURCHASER or SAP_EC_BBP_ST_PURCHASER in PFCG. How to get that entry in the role.
Because of this I am not able to see "Supplier Screening" link with purchaser's role in EBP web application and not able to see the suppliers who are registered through self registration page.
Please provide the solution for the above.
Thanks in advance.
Jagdish

Hello Jagdish,
1) This is since SRM 4.0, where we replaced Java based SUS WPS with BSP.
One should be for SUS only, and the other one for SRM ???
2) Here is a copy of online help. You must adapt the role with this BSP link:
Prerequisites
Supplier Screening with SRM Server
You have at least one of the following roles:
·         Purchasing assistant
·         Professional purchaser
·         Operational purchaser
·         Strategic purchaser
The Preselect Vendors transaction is delivered with the single roles. In order to use the transaction, you must enter the URL for supplier screening in the single role. Then you must update and activate the composite role.
Supplier Screening with ERP
You have logged onto the supplier registration system with the role SAP_EC_SUS_ROS_ PROCESSOR.
Rgds
Christophe

Similar Messages

VST edit screen not visible after a certain number in a session

Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
Lenovo laptop, i5, using firepod.

The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.

Screen not visible

Screen flashes, remote client window is listed (in WIndow Menu), but not visible. It is as if it is off-screen somewhere. Any ideas? I have tried deleteing from the all computer list and reconnecting with no luck. Unfortunately it is a co-located Mini in a secure location - I can't easily get to it to put a real monitor on it.

I was able to see the log and these are the entries after I ran the kickstart routine. Is there anything unusual in there?.:
savantadev:admin admin$ tail -f /var/log/secure.log
Feb 2 13:57:15 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 14:19:47 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: admin :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 15:47:20 savantadev sshd[91196]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Feb 2 15:47:25 savantadev sshd[91194]: Accepted keyboard-interactive/pam for admin from xxx.xxx.xxx.xxx port 55603 ssh2
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d created
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d attributes 0x20
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 dead
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Killing auth hosts
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 destroyed
Feb 2 16:01:58 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[91468]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx:: Type: DH

Create supplier button not visible

Hi Gurus
We are running r12 on solaris 5.10. We have one custom responsibility "KGL AP Superuser".
Previously we had a option of “Create Supplier” option under KGL AP Superuser--> supplier --> Entry. Now that option is not visible. But It is there is TEST CLONE. How do I enable or visible this in PRODUCTION.
Regards
Musaddaq

Hi Bob,
Thanks for your response. Could you please let me know where can i find steps or video to create application in windows.
Vjay

Custom fields in Source of Supply screen - not getting saved

Hello Experts,
There is a requirement to create 2 customizing fields on Souce of Supply (SOS) screen of Shopping Cart in SRM7.0 and has to be updated in the Backend system (PR,PO etc).
I have created CUST1 and CUST2 in the standard include - INCL_EEW_PD_PARTNER_CSF (Customer Enhancements to Partner in Doc.) which is being used in the structure /SAPSRM/S_CLL_WD_SUPPLIER (CLL structure for SOS).
But while creating Shopping cart, these customizing fields are not getting saved and not transfered to backend.
NOTE:
1. I refered SAP Note - 672960 , but it has no information abt SOS enhancement.
2. I have enhanced the backed system accordingly to show these 2 customizing fields in PR and PO.
3. Webdynpro component for SOS screen is - /SAPSRM/WDC_DODC_SC_I_SOS, and the structure used is /SAPSRM/S_CLL_WD_SUPPLIER.
Awaiting the correct answer from you all
Thanks and Regards,
Prabhu

Hello All,
I'm facing exact same problem.
Steps followed:
1. Configuration from SPRO
Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Extension and Field Control -> Configure Customer Fields -> Define Customer fields on item Level -> Append for Customer Fields on Shopping Cart Item
2. Add new fields in Webdynpro: /SAPSRM/WDC_DODC_SC_I_SOS
View:V_DODC_SC_I_VENDOR
Still i'm not able to get proper results.
Please help.
Thanks in advance.
Yogesh

Caller screen not visible, mixed up screens on iphone

when my phone is not in use, often times there will be two screens visible at once. for example, the ipod control will be visible on my wallpaper when i'm not even using the ipod.
also, the screen doesn't always come up when someone is calling me.

Is this what you are seeing?
http://i38.tinypic.com/2qtwmtc.jpg
*That is a screen shot of iPod Control while iPhone is locked. It is typically activated when you double click the home button. It can make the controls re-appear and disappear.
Have you tried rebooting iPhone at all since this started?
Hold down home button - & Sleep/Wake button together. Let go once you see a silver apple logo.

Icon display in Module pool screen not visible to some users

Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
Sumith

As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell

Requirement screen not visible

Hi Experts,
I have one problem. below is the details.
In tcode PIQST00. after entering the student number and click on Audit details.The screen Admission Editing is displayed. but the requirement subscreen area is not displaying the data.
could you please let me know what has to be done
Thanks in Advance
Regards
Santosh Kumaar.M

Hi Sudhir,
Thanks for the reply.
I already assigned requirement profile template to program of study. I'm able to see requirement filed in student file but empty without any requirement and checkbox. Did all the settings as per audit cookbook.
The parent table PIQDBAUDF is having the AUDF_ID(Requirement Profile Identifier (ID)). but not inserting the same value in
1) PIQDBAUDF_STRU1 ( Requirements of Requirement Profiles)
2) PIQDBAUDF_STRU2 ( Subrequirements of Requirement Profiles).
Could you please let me know where we are going wrong with settings/configuration or do we need to implement any OSS Note. if so please do let us know.
Thank you in advance.
Regards
Santosh Kumaar.M

Netpoint License Activation screen not visible

I am trying to install Netpoint for the first time on a demo system. My Netpoint website, however, does not show the License Activation screen. Without that, my license cannot be validated and I am completely stuck. All of the steps in the instructions have been followed. Has anyone seen this behavior before? Thank you in advance. Note: the Netpoint DB, with superuser, has been created successfully, the web.config looks good, the permissions are all in place, etc.

I am using the "OEC 4" theme, so I am seeing the normal home page for that theme, but there is no "license activation" message/section at the bottom. Just the standard home page.
I installed Webtools 5.9
I got the installation docs (Netpoint 5.9 Installer.doc) at the same time I downloaded the software from the SAP Site.
The installer .msi file is named 592netpointinstaller.msi. When I installed it, the installer said that my local version needed updating. I pressed the "download files" button, and upgraded to 5.9.6. However, the red letters at the bottom of the installer screen continued to say "New Installer Available to Download". But it seems that the 592netpointinstaller.msi is the latest version, correct?

Menu bar at upper left of screen not visible

I have lost the menu bar that appears in the upper left corner of the screen ("File", "Edit", "View", etc., as well as the back/forward arrows). I restored it on Internet Explorer -- how do I restore it on Firefox?
== This happened ==
Every time Firefox opened
== I tried (finally successfuly) to get rid of AOL

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

BROKEN SCREEN "CLIP" SCREEN NOT VISIBLE

I have just been given a Portege 7200 series with docking station. The clip which fastens the screen to the main unit is broken and the screen doesn't seem to work. Whilst I can cope with the broken clip, I wondered if this is affecting why the screen isn't working? I can only see a very very dim image. Obviously I use an external screen but wondered if there was anything I could do to make the laptop screen work again. Thanks for any help.

Hi
I am pretty sure that some hardware component is defect. It can be FL inverter or something like that. In my opinion you should contact Service Partner and let them exchange it. Portege 7200 is very nice notebook.
In my opinion it is worthwhile to change it.

Reminders screen not visible

I'm running OSX mavericks.
when I open reminders app, there is no window, nothing. if I uncheck reminders in the system preferences (icloud), it comes back, but blank. If I put in a reminder then (keeping reminders open) re-check the reminders box in system preferences, the icloud reminders show up. but when I close the reminders app, it's just like before.
reminders is working OK on other (iOS and mac) devices, and the reminders I created on the broken mac show up after I've re-checked the icloud reminders box (they get merged into the icloud reminders then synced to the cloud).
This is vexing, it happened to me before with my other mac, and I have no memory of what I did to fix it.
I tried repairing permissions, I tried reboots, I tried resetting the pram (or whatever it's called - option/apple/p/r during boot).

I was able to see the log and these are the entries after I ran the kickstart routine. Is there anything unusual in there?.:
savantadev:admin admin$ tail -f /var/log/secure.log
Feb 2 13:57:15 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 14:19:47 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: admin :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 15:47:20 savantadev sshd[91196]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Feb 2 15:47:25 savantadev sshd[91194]: Accepted keyboard-interactive/pam for admin from xxx.xxx.xxx.xxx port 55603 ssh2
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d created
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d attributes 0x20
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 dead
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Killing auth hosts
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 destroyed
Feb 2 16:01:58 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[91468]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx:: Type: DH

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

Insurance Company Supplier Not Visible in Fixed Assets

Hi,
We setup a supplier as a "Insurance Company" supplier in Oracle AP, but the supplier is not visible in the Fixed Assets Policy drop-down list. Does anyone know if there is an additional step that has to be performed first?
Thanks!

Hi there, this forum is for Oracle Insurance products - not Oracle AP. Try this forum Financials instead.

Why is the placeholder Q&A for multiple choice not visible on screen?

After inserting 6 Multiple choice quiz slides in Captivate 7, the placeholder Q&A text is not visible, so there's no way for me to modify them with my Q&A's. However, they are visble in Preview mode. Any suggestions?
This is happeneing in a project that someone else created & I am editing. I made a new version & copy/pasted the quiz slides into a new file. Ever since then I've had this problem. When I open the original file, it's now doing the same thing there as well. What gives??
Below is what I'm seeing. If you look at the slides on the filmstrip on the left, you can see that there is nothing there, however in the Preview, you can see the placeholder text.

Hi Rod & Lily! Thanks so much for replying.
OK - the screen shot below is what I see when I am in edit mode. Completly blank except for the "Multiple Choice" heading at the top. I've highlighted in red on the Properties & Filmstrip, which Master slide I'm using. Hopefully you can see that on the Master Slide the placeholder text is there, but not in the edit view.
Lily - below is a screen shot of the Quiz Properties. Hopefully you can see it.

Supplier screening not visible

Similar Messages

Maybe you are looking for