Supply area

Hello,
Where can I customize supply area of material in Spro?What path?
Regards.

Hi,
You can maintain the supply area for kanban in transaction pk05.
Regards,
Senthilkumar

Similar Messages

Handling Unit Management and supply areas with WM/control cycles

Dear all,
has anyone come across the issue how to handle a replenishment process for production with supply area within WM and Handling Unit Management?
Normally a supply area is being staged via control cycles. in the supply area, all storage units get lost (standard functionality as far as I know). When we post the GI, the components will be taken out of the supply area, backflushing is not allowed as far as I know.
Now: what happens if HUM is switched on? Do we have to enter a HU for these GI's as well? Or does the supply area keep the information of the SU/HU? I want to avoid that the users have to tell the system the HU no. for every screw they take/consume...
Thanks & regards
Christian

Hi,
(as already described,)
it is possible to use handling unit management together with lean
warehouse management. You activate handling unit management independent
from storage unit management (that is only possible in case of full-WM
as far as I know).
Only in case if storage location is full-WM- AND HU-managed the storage
unit management is always active and HU numbers are taken over as SU
numbers. In all other cases HUM and SUM are independent from each other
and number ranges must be set a way that they are not overlapping.
Regards,
Ely

Supply Area-BOM Level by Level

Hi Folks,
I am having a problem in fetching the Supply area when a Component is having many sub-assemblies.
To be in detail,
I am fetching the DISTINCT Production Order(AUFNR) from MSEG w.r.t to MBLNR and MJAHR.
Then w.r.t to this AUFNR I am fetching the BOM category(STLTY) and BOM (STLNR).
Then w.r.to this STLTY and STLNR I am fetching the Supply area(PRVBE).
If the supply area is maintained at this level,then fine.If this BOM is having many sub-Assemblies and the supply area is maintained at a different level then we need to explode that BOM step by step and fetch the Supply Area.
To be precise CS11 gives the Supply Area according to the BOM Level by Level.I just wanna fetch the Supply Area as per that.Do anyone here has an idea about how this functionality can be achieved.
I am trying to find by debugging CS11,any valuable inputs from experts here will be helpful.
Thanks,
K.Kiran.

Prabhu,
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
          EXPORTING
                CAPID                        = 'PI01'
                DATUV                       = v_aufld
                MKTLS                       = 'X'
                MEHRS                      = 'X'
                MTNRV                      = wa_afko-plnbez
                STLAL                       = wa_afko-stlal
                STLAN                       = wa_afko-stlan
                STPST                       = 0
                SVWVO                     = 'X'
                WERKS                     = wa_afko-werks
                VRSVO                      = 'X'
            TABLES
                  stb                           = bom_exp
            EXCEPTIONS
                   ALT_NOT_FOUND               = 1
                   CALL_INVALID                    = 2
                   MATERIAL_NOT_FOUND     = 3
                   MISSING_AUTHORIZATION = 4
                   NO_BOM_FOUND                = 5
                   NO_PLANT_DATA                = 6
                   NO_SUITABLE_BOM_FOUND      = 7
                   CONVERSION_ERROR               = 8
                   OTHERS                                     = 9.
Got it.We missed out DATUV,MEHRS fields while executing.
Thanks,
K.Kiran.

Supply area assignment in Production order

Hello All,
Is there supply area available in production order? As per my understanding the storage locations ( either issue or receiving ) data is available in the BOM of the Production order. But is there any field for capturing the supply area in the production order. If so from where is this supply area picked, is it from the Default supply area in the production version maintained in Material master?And in which tab can i see this supply area information in the Production order.
Regards
Divya

Divya,
There is no field for supply area that can be found in production order. However this filed is available in Work center Master data. WC is displayed in the operation screen of production order.
Supply area (SA) is used in the context of material replenishment area and is situated directly on the shop floor. Many work centers (WC) could be located within a single SA. This field is available in WC so that location of WC can be displayed easily on a large shopfloor.
I am sure this helps. For more questions please come back.
thanks,
Ram

Adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.

In our R12.1.3 EBS, on RHEL 5.5, 64-bit, we are getting this error -
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
However, neither the db is down nor the APPS password is wrong. I am able to connect from sqlplus from application tier. And also from the 10.1.3 home. I have checked similar threads here but none helped. Raised an SR yesterday but that too hasn't helped yet.
Any ideas?
Regards,
Vinod

please post he output of
SQL> show parameter sec_case_sensitive_logon
$ECHO TWO_TASK
clean FND NODES
How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Check if all services are down on application node, no process should be running.
shut down db listener and database
reboot the server
start or reload listener on DB node and start the database
Run autoconfig on db tier -- make sure it completes successfully.
Run autoconfig on all apps tier -- make sure it completes successfully.
Now, try to start applications on middle tier.
ApPsMaStI
sharing is Caring

How to realize assign mul storage location to one supply area

senario description: in my project there two production plants A and B.and use the one serial work center which created under the plant A.At the same time ,raw material were stored the defferent storage location in every plant.and the storage location linked with WMS.my question is:
1how to design the supply area,create one links many storage location or create one supply area for every storage location.
2whether the TR can be created automatically when release the production order if the produciton order is in the plant B.

Hi,
1)how to design the supply area,create one links many storage location or create one supply area for every storage location.
To design supply area one storage location can be assigned to several supply area however one supply area cannot be assigned to several storage locations.
2whether the TR can be created automatically when release the production order if the produciton order is in the plant B.
To create TR automatically you have to configure at movement type & storage type level.
Regards
Ravi shankar.

BAPI to Maintain Supply Area

Hi Experts,
Is there a BAPI or FM to maintain table PVBE (Supply Area) that works the same as transaction PK05.
Or another method that I can use in LSMW...
<b><REMOVED BY MODERATOR></b>
Thanks in advance...
Message was edited by:
Alvaro Tejada Galindo

Hi,
look at the Function modules
PVBE_DATA_MAPPING
PVBE_DATA_SELECTION
PVBE_KEY_SELECTION.
If these are not working in your case then use the LSMW
Regards
Sudheer

BAPI or FM for Supply Area - PK05 using LSMW

Hi Folks,
I am transfering Supply area records (T-code PK05) to SAP using LSMW Recording method. But I am getting some errors.
Can any one mention any FM or BAPI or IDoc or any Batch Input or Direct Input Program for Supply area?
Thanks in Advance,
Asif Ali Khan

Hi,
Here is the thread which will give you the BAPI as well as the Function module
BAPI for CJ02
Regards
Sudheer

Production supply Area assigned to Mov Type 319

Dear All,
What is happening in background if we set production supply area to mov type 319(Replenish for production).
Also please tell what is KANBAN Interface & why it is used.
Thanks & Regards,
Olet Malla

Hi
Yes you do not have WM-PP interface.
With WM-PP Interface you can automate the entire process based on Production order status.
For example when you confirm the Production order system will genearate TR automatically for all the components. This can be further automated to complete the warehouse operation by changing the status of Production order.
[Advantage|http://help.sap.com/saphelp_46c/helpdata/en/c6/f840fb4afa11d182b90000e829fbfe/content.htm]
Karthik

Production supply area (PSA)

Hello,
I would like to know how to define the production supply area in the material master record. It would be of much help and precise if anyone could mention the view in material master in which the Production supply areas could be assigned for a material.
Thanks,
Maxx.

If you set this up on material master, it will always stage material to this area. You can achieve the same by maintaining a control cycle. With control cycle and leaving this field blank on material master, you can map it to the level of storage bin for production staging.

SUPPLY AREA & Controlling Cycle

Hello,
I am working with PP REM scenario.
I want to know more about the customizing and master data and Function of following terms.
1. SUPPLY AREA
And
2. Controlling Cycle
Maulik

Dear Maulik,
Dear Maulik,
The Master data required for Kanban production control includes
1.Supply Area:A supply area is an interim storage location on the shop floor which is used to provide material directly to the
production line or the work center.
The supply area can be a shelving area, an area marked off on the ground, special boxes and so on. Defining the supply areas
for a plant is part of the material flow design for KANBAN. The supply area is defined in Customizing and is assigned the following
objects:
Plant
Storage location
Person responsible
Goods movements are posted to the storage location assigned to the supply area.
One storage location can be assigned to several supply areas, however, one supply area cannot be assigned to several storage locations.
2.Control Cycle: The control cycle defines the relationship between the demand source and the supply source.
The control cycle contains the following control data for KANBAN production:
●     Kanban circulation, that is, the number of kanbans and the quantity per kanban or per call item as well as the number of load carriers
●     The basic data required for automatic kanban calculation, if necessary
●     Replenishment strategy
●     Printing kanbans, if necessary
●     The delivery address, if necessary
3.Replenishment Stragegy: The replenishment strategies define in the control cycle how replenishment is to take place:
Using in-house production
Using external procurement
Using stock transfer
The replenishment strategies also determine whether and which replenishment elements (run schedule quantities, production orders, and so on) are created by the kanban signal.
The replenishment strategy is assigned to the material in the control cycle.
1.You can create the supply area by executing PK05
2.Control cyce can be created using PK01.
Regards
S Mangalraj

Supply area in kanban

Hi All
i want to change a supply area for the exsiting kanban control cycle. I tried to change the supply area which is having the different storage location, but system is not allowing me to change it. Please suggest me if there is any other way to change supply area in the kanban control cycle rather deleting it.
Your help is highly appreciated.
Quantum.

Hi
Steps in SAP: (Discrete Manufacturing - Classic kanban)
1) Maintain Supply Area T code:PK05
2) Create Material Master with all relevant Kanban Data Eg: JIT Delivery schedule, Supply area
T code: MM01
Create BOM,Routing,Work Centre for which are all required to carry out Discrete manufacturing cycle- CS01,CR01,CA01
3) Create Control Cycle: T code: PKMC
4)Go to Demand Kanban Board T code: PK 13 N
5)Convert Waiting Kanban to Empty (Using Kanban Board/ T code:PK21)
6) Do the confirmation & Goods Receipt for order/ Convert Empty Kanban to Full (Using Kanban Board/ T code:PK21)
Similarly you can try other Kanban procedures like u2013
KANBAN with Quantity Signal , One-Card KANBAN, Event-Driven KANBAN Input: (For Classic Kanban)
Input: (For Classic Kanban)
Expected Results
1. Maintain Supply Area T code:PK05 :- supply are will be created
2. Create Material Master with all relevant Kanban Data Eg: JIT Delivery schedule, Supply area
T code: MM01 :- Proper Master Data will be created
3. Create BOM,Routing,Work Centre for which are all required to carry out Discrete manufacturing cycle- CS01,CR01,CA01 :-
4. Create Control Cycle: T code: PKMC :- Control Cycle/material will be created
5. Go to Demand Kanban Board T code: PK 13 N :- Display of Kanban Control Cycles with Kanban
6. Convert Waiting Kanban to Empty : - Production order will be generated
7. Do the confirmation & Goods Receipt for order/ Convert Empty Kanban to Full :-
Kanban signal changes from Empty (Red) to Full (Green)
Thanks
Saravana
Reward if useful

Errror : production supply area not available fieldin work center .

HI
   hi friends
        i want to maintain production supply area in work centre...
        production supply area means storage location??
      i have a confusion between storage location and production supply area
pls suggest me where i missed the setting
with regards
dinesh

Production supply area is not a storage location. It is linked to one, but you may have more than one supply area per storage location.
Supply areas are used in KANBAN processes, and I think that also in WM-PP interface.

Production supply area (PSA) and supply area

Hi,
Is there any difference between supply area and Production supply area. it woul be good if you could explain me the difference.
Thanks,
Maxx

Both are same
Production Supply Area is the link between Warehosue Management and Production function.
Production supply areas (PSAs) are used for material replenishment and are situated directly on the shop floor in the production department. The supply area groups work centers near production storage bins based on the material staging methods. You need to enter the PSA in the work center master data.
http://help.sap.com/saphelp_46c/helpdata/en/c6/f8412f4afa11d182b90000e829fbfe/frameset.htm
Hope this helps.
An area on the shop floor where material is provided that can be directly used for production.
The supply area is used, for example, in KANBAN production control and for material staging using Warehouse Management (WM).
Proposed Supply Area in Material Master Record
The supply area is used as an interim storage area on the shop floor
     which is used to provide materials directly at the production line.
The proposed supply area is mainly used for KANBAN materials that are
     only or usually provided at one supply area in a plant. Here, this supply
     area can be easily saved in the system.
The proposed supply area is used, for example, to determine the supply
     area for the dependent requirements of a material.
     The supply area in the dependent requirements of a material is required:
     o to enable the system to calculate the KANBAN control cycles
        automatically
     o to enable you to select requirements in the pull list with reference
        to a supply area

Supply Area Goods Transfer Posting Problem

Dear SAP Gurus,
I am facing a problem in which material has to be issued by transfer posting through movement type 541 to Subcontracting Vendor.
The material is to be issued from Supplying Area.
When transfer posting is initiated for the PO, material is not getting issued from Supplying area whereas all other BOM materials are being picked up.
Please guide me where can this problem be?
Thanks & Regards
Manav Anand

Hi,
I hope you are using ME2O or MB1B transaction with 541 mvt type. As per Subcontracting scenario you are supposed to sent the BOM mateials only to your subcontracting vendor and finally supposed to get the material which is raised in the PO.
Now please let us know where you have been stuck so that we will be able to help by providing our explanations.
Regards,
DilL

Supply area

Similar Messages

Maybe you are looking for