Supply chain process cycle

Hi Gurus,
Can somebody send me Supply chain process cycle doc?
its urgent.. pls

Hi Raju,
The Optimizer should serve your requirement as it considers the capacity constraints and can be used for finite planning. Regarding subcontracting location , you can map it as either a DC location or a Subcontractor location. Better way would be to map it as a subcontracting location. Mapping it as just MRP area would not serve as you want it to consider during the finite planning runs for optimizer.
Let me know if it helps
Regards
Gaurav Mathur

Similar Messages

Load of EBS Supply Chain data deletes data for General Ledger

Hi,
we are trying to load data from EBS 11.5.10 to BIAPPS 7.9.6. We have loaded data to Financials Subject Areas (Budget, Financials - COGS, Financials - General Ledger, Financials - Payables, Financials - Receivables) using pre-defined execution plan Financials_Oracle 11.5.10 and data has been successfuly loaded and shown on dashboards.
Later we have loaded data into Supply Chain Subject Areas (Employee Expenses, Financials - Payables, Supply Chain - AP Invoices, Supply Chain - Purchase Cycle Lines, Supply Chain - Purchase Order, Purchase Receipt, Purchase Requisitions) using pre-defined execution plan Procurement and Spend: Oracle 11.5.10. After this load data are visible on Procurement and Spend dashboards but previously loaded data on Financials - General Ledger dashboards are missing.
So we have loaded data to Financials again which brought Financials data back to dashboards but data for Procurement and spend disappeared.
We have also trying to load all data using Complete Oracle 11.5.10 execution plan. After this load most of the dashboards for Financials and Procurement and spend are empty.
And finally we have created our own execution plans for Financials, Supply Chain and both and tried the same scenario. The results are the same. It seems to me that load of Financials data deletes Supply Chain data and vice versa.
Can somebody advice how to load data for Financials and Supply Chain together?
Thanks a lot, Petr
Edited by: user793851 on Oct 23, 2009 11:02 AM
I have to add new info: the all data are back and visible after the night. We didn't perform any actions. Does anybody know about some settings which can cause such behaviour?
Many thanks,
Petr

Try the BI Apps forum: Business Intelligence Applications

Supply chain modeling of subcontraction process using SNP

Dear Experts,
I am in the phase of designing my supply chain business process in APO
We have two plants
Plant u2013 A (manufacturing )
Plant u2013 B (distribution center)
Subcontractors - for Plant A
Subcon-1
Subcon-2
Subcon-3
Subcon-4
Subcon-5
Subcon-6
Subcon-7
Demand planning /forecast is done on the basis of
Customer
Products
And Plant
When forecast is done in demand planning an send to SNP , system must give planned order on the basis of available capacity , low cost of production of the my subcontractor ,I believe I need to use SNP optimization
Does SNP Optimizer can serve my requirement
Also how do I need to define my subcontractor either as DC location or just a MRP area
Please do not hesitate to ask more details if you are not clear my requirement
Thanks & Regard
Raj

Hi Raju,
The Optimizer should serve your requirement as it considers the capacity constraints and can be used for finite planning. Regarding subcontracting location , you can map it as either a DC location or a Subcontractor location. Better way would be to map it as a subcontracting location. Mapping it as just MRP area would not serve as you want it to consider during the finite planning runs for optimizer.
Let me know if it helps
Regards
Gaurav Mathur

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.

"Demo on SAP EWM Quality Management Process with Storage Control" by Ganesan Srinivasan-SAP EWM Consultant -Krypt Inc-a Leading SAP Supply Chain Company USA.
http://youtu.be/1Tu9c7ecL34

Very Good Demo Navin

Supply Chain Visibilty

Dear Colleagues;
Reaching out to supply chain professionals for a general question on visibility.
SAP has provided for basic functions ofASN and confirmations in procurement from the vendors to provide information on the purchase order line. What are others doing regarding communication during shipment from vendor, and when the shipment is dropped in the yard? Are you using SAP in any way? i.e once the vendor has shipped say by boat or train, how is the data being captured, if at all.
Has anyone configured additional confirmation types to 'track' this movment for visibility purposes, or has other functionality been developed/deployed to assist in the supply visibility process within SAP? Again, other types from a visibilty point of view. If you have configured custom types, are they relevant for MRP for example? Or for reporting strictly...? Etc...
Any insights into what others are doing is truly appreciated!

Hi Jeff,
I worked on this scenario in an automobile industry, the requirement was same
When the vendor sends the shipment SAP should be able to track it and consider stock in transit for MRP
Two options were evaluated 1) SRM SUS ( Supplier self service) (2) Developing the Enterprise portal and interfacing to SAP
Client opted for second, using netweaver component of SAP, supplier was given access to update shipping data on portal
Interface use to create an Inbound delivery with reference to the shipment data, once inbound delivery in created MRP can take into
account it as stock in transit.
The easy option would be to take shipment data and let the Purchasing create IBD manually if Portal or SUS are out of reach
Thanks
Diwakar

Implementing Finanacial Supply Chain Management - Collections Managment

Dear all
We are in the process of Implementing Financial Supply Chain Management - Collections Management. We are also looking at business content in BI 7.0 as reporting solution.
While 0CLM_MC1 and 0CLM_MC2 are providing most of the data related to call worklist (like amount due, amount disputed, amount promised,dunning level etc etc) , an important piece of information that is crucial for debt reviews which is the text information stored in promise to pay and customer contact is missing.
Is there any way to upload this information (Long Text) is BI.
Thanks & Regards
Sachchida Nand Dubey

Hi,
U can go for BDC to upload ..
i.e.
'GUI_UPLOAD'
In general BDC and BAPI's are used to upload the data...mainly BAPI s are used to upload the bulk data...
if it screen flow then go for BDC upload...otherwise go for the BAPIs FM's
Regards
Kiran
Edited by: Kiran Saka on Feb 9, 2009 10:52 AM

My Published Pieces: Eight ways to improve your SAP supply chain operations

Hello everyone,
Fulfilling my promise to start sharing and contributing more towards the wonderful SAP SCN community, I've decided to share some of my widely-read and appreciated pieces, published over a period of time on SearchSAP.com website. These are collection of eight different published pieces to help improve your SAP logistics and supply chain operations.
You can also register for Free on SearchSAP.com website, and immediately start reading some or all of my published pieces on:
Eight ways to improve your SAP supply chain operations
Now, here's the link: http://bit.ly/17ohtsQ
Also, I wish to take this opportunity let you know all that I am indeed honored and humbled to see the massive popularity, appreciation and demand of my just-published book “Production Planning and Control with SAP ERP” – STILL ranked among the TOP 10 best selling books on SAP PRESS website: http://bit.ly/19t87Gg
You can download the free reading sample (over 100 pages) of the book from this link:http://bit.ly/15BrXPl
Until next time,
Jawad Akhtar

Hi Mohan,
Good wishes become SAP Consultant.
You have chosen right module for you and also you can check SAP CRM Sales too.
Domain knowledge only gives you to understand easily when you learn SAP processes but it does not count your experience in IT field. They will always ask relevant IT experience, so domain experience gives knowledge to understand SAP SD fast.
Moreover, SAP authorized training institutes 30 days classroom training only and you can do certification immediately. If you want to read through online then SAP offers wide range of online training to acquire certification.
SAP SD Professional Certification - https://training.sap.com/shop/certification/p_sd_65-sap-certified-application-professional---order-fulfillment-with-sap-…
SAP SD Associate Certification - https://training.sap.com/shop/certification/c_tscm62_65-sap-certified-application-associate---order-fulfillment-with-sap-erp-60-ehp5-g/
SAP E Academy - https://training.sap.com/shop/course/tscm6e-sap-eacademy-scm---order-fulfillment-e-academies-095-nz-en/
Best of luck.
Regards
GGOPII

Supply Chain Cost Rollup error

Hi All,
need some help with this ...we have setup a new Standard Costed Inventory org and then we are trying to run the program : Supply Chain Cost Rollup - Print Report for this new org.
This program has been ending in error mentioned below for this org while it is running fine for all the other inventory orgs.
Could someone please advise what could be the issue here :
stat_low = 86
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
JVMCI161: FATAL ERROR in native method: Wrong method ID used to invoke a Java method
     at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
     at oracle.reports.engine.EngineImpl.run(EngineImpl.java:441)
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:975)
     at oracle.reports.server.ExecAsynchJobThread.run(ExecAsynchJobThread.java:54)
Report Builder: Release 10.1.2.3.0 - Production on Mon Feb 27 11:10:39 2012
JVMDG217: Dump Handler is Processing Signal 6 - Please Wait.
JVMDG303: JVM Requesting Java core file
JVMDG304: Java core file written to /applcommon01/EPRODR/log/EPRODR/javacore64618496.1330361288.txt
JVMDG215: Dump Handler has Processed Error Signal 6.
With due Regards..

user5149250 wrote:
No it works fine for the other Standard & Average costed orgs.
Is there anything which could be cross checked or confirmed.Have you reviewed these docs?
Account Analysis - (180 Char) Error: JVMCI161: FATAL ERROR in native method [ID 1300008.1]
R12 Trial Balance Detail Report (GLRTBD) Errors With: 'JVMCI161: FATAL ERROR in native method' [ID 1085923.1]
FAPROJ Depreciation Projection Terminated by Signal 6 [ID 1319134.1]
Thanks,
Hussein

Supply chain management - reg

Dear sir,
This is Sudha working as a logistics Executive in an organization since form 3 yrs
As i am interested in SAP, i have to move my career into SAP in this case please suggest me that which
module is suitable for me to take step into SAP.
Some of my friends said to take SCM (supply chain Management) is it correct or i have to take some other
i am in confusion now so please suggest me to move forward
In my company i am working in Logistics dept where my role is Importing power plant equipment through Sea
custom clearance of imported material at port origin,preparation of shipping documents etc..
so please give some proper guidance sir
warm regards
sudha

Hi Sudha,
Personally choosing a module in SAP is completely yours choice as you have to think well which will suit your aspirations.As from your portfolio i came to know that you got exposed to supply chains.yes SCM will be a good choice.I can see OTC/SD will be a good choice for you.OTC normally refers to the business process for receiving and processing customer sales.It follows "Opportunity to Order" and covers business to business(B2B) and business-to-consumer (B2C) sales.
Again choice is yours !!. .Wish you good luck in SAP career.
Regards,
Kannan

Supply Chain Cockpit

Hi all,
can any one please explain me the purpose, working and application of the SCC in detail ???
Thanks a lot in advance,
PP

Hi PP,
The Supply Chain Cockpit (SCC) consists of a highly intuitive, graphical interface that acts as the top enterprise planning layer covering all planning areas such as manufacturing, demand, distribution, and transportation.
All employees in the Plan -> Source -> Make -> Deliver cycle of supply chain management can use it to their advantage
As the gateway to SAP APO, the SCC makes dealing with a vast supply chain easier and more manageable. SCC allows you to:
Create individual work areas so several planners can work simultaneously on different parts of a supply chain.
View the supply chain from all angles, down to the smallest detail, to minimize the complexity of the relationships among supply chain components.
Measure supply chain performance with KPIs (key performance indicators) that are stored in SAP Business Intelligence (SAP BI).
Respond immediately and accurately to new developments by tracking alert situations.
The SCC can be configured to suit conditions within a wide variety of industries and business situations.
For still more informations, please refer link
http://www.e-optimization.com/resources/uploads/ACF308.pdf
Regards
R. Senthil Mareeswaran.

The SAP Press book collection The Supply Chain Fundamentals

Hi. I can navigate sap fairly well. I can follow a Business Process or, Workflow - if it is already written out, i.e., a test script. I am wanting to increase my knowledge, to the point where I know my way around SAP (MM) better, way better. I cant afford the cost of the SAP Training courses. So, would The Supply Chain Fundamentals Collection of books from SAP Press be a good investment? Please offer any advice you may have.
Thanks.

Hi,
Get "SAP MM - Functionality and Technical Configuration". This is a good investment and has a wide applicability across the SAP platform.
Cheers !

Mobile Supply Chain

hello
This is on r12.1.3
We are in the process of implementing Mobile Supply Chain applications.
And for that we need to procure hand held scanners. Question is, which ones?
Does Oracle recommend any specific brand for handheld scanners that are optimized or set as standard for MSCA? We are leaning towards Honeywell as they are traditionally known to work with Oracle products, but open to new suggestions (if any). If you can refer a link or white paper from Oracle, it will help.
Thanks,
Darsh

We are running 11.5.10.2 on Linux 64 bit. Client requires to implement Mobile supply chain...Can any one give me some metalink notes or pointers for the same . ?/ Do we have to do any installation in Handhelds too ? ..PLease guideI assume the application tier node is running on Linux 32-bit since this tier is not supported on Linux 64-bit.
Please refer to "Oracle Mobile Supply Chain Applications Installation and Implementation Guide" and "Oracle Mobile Supply Chain Applications User's Guide" which can be accessed from http://docs.oracle.com/cd/B25516_18/current/html/docset.html
You may also refer to:
What Are The Parameters To Start GUI Oracle Mobile Supply Chain Applications Using CrEme.exe ? [ID 413625.1]
Unable to Stop Mobile Supply Chain App Server Manually [ID 170939.1]
MWA Troubleshooting Tips for Release 11i [ID 269991.1]
Does MWA Provide Any Interface To Monitor And Configure, Mobile (Supply Chain) Applications Server Manager [ID 312170.1]
Thanks,
Hussein

Launch Supply Chain Plan

Hi All:
I am using Advanced Supply Chain Planning tool in conjunction with Oracle Process Manufacturing for material & resource level planning. As part of the process I did all the needed setups and got to the point of Running the Supply Chain Planning Process. However After I launch the process, the parent process has triggered a bunch of child concurrent requests in the background. And I have been stuck with the concurrent requests running forever in the last 8 hours without completion. The status is "normal" and "running" for all concurrent requests..
Navigation:
Advanced Supply Chain Planner
Navigate: Supply Chain Plan - Workbench
Any idea why ?
Thans
Sandeep Penumalli

Hi,
for what I saw many reasons can cause this kind of stuck.
1) Check if there are some locks on the MSC tables, maybe is the reason why it does not go through.
Usually the concurrent (I suppose you are stuck at the memory based snapshot) creates a BIG log file. Check if the log file goes on.
2) Once the Snapshot was incredibly slow due to some loop in the BOM. Since you are working on process manufacturing the loop should be in the recipe. You should see if there is a loop in the log.
3) Stop the concurrent if he goes beyond any acceptable time and try to create a very small plan, with just few item, a week of planning time and one demand. Try to use some dummy supersimple data. If the plan goes fine it means that probably you have some issues on the data you feed the system. (i.e. Loop or too much things).
4) I am not sure if this apply but maybe you have some sort of limitation on the maximum number of concurrent that can run simultaneously. We had something similar and if I well remember some concurrents where waiting for other to finish but the others could not start do to a limitation on the maximum concurrent. (check in sysadmin for this).
Hope it helps
Francesco

Mobile supply chain planning

Where can i get details about oracle mobile supply chain planning?
Thanks in advance.
G.R.RAMESH

Dear Amr,
When dealing with Oracle concerning the planing process, we can use one of the following methods:
1- Traditional Planning (Forecast>MDS>MPS>MRP); this is the favor method when you have one organization setup in the system.
2- Oracle Supply Chain Planning method; this is used if you have more than one organization setup in the system; i.e. if you have distribution inventory organization, raw material inventory organization, and finished good inventory organization separates from each others.
3- Advanced Supply Chain Planning.
My question is how to setup the second type (Supply Chain Planning)? , any body has an idea?

Supply chain

Hi mm gurus,
my client is having 2 manufacturing plants and one supply chain unit.
this supply chain is just like an extended storage location to one manufaturing unit.
they took special permission from the goverment to transfer stock from supply chain to that particular manufacturing plant with some excise exemptions(no need to maintain any excise records).
from this supply chain very rarely some trading activities happens(for this purpose a excise registration is there and for only this purpose they are maintaing rg23d reg).
when ever stock has to transfer to 2 nd
so for this scenario how i can map .whether i can go supply chain as one plant or just as storage location to that manufacturing plant.
kindly clrify my doubt.
thanks & regards
venkat

Hello,
If the supply chain unit is excise exempt and you do not have to maintain any records.. Make it a storage location for that manufacturing plant.. That way you wouldn't even have any valuation fort he Supply chain unit.
I am confused about the second half.. Trading.. I believe since the unit is not defined in SAP, the trading process is not shown in SAP also.. if this is correct , a storgae location is your best bet, else should you have other considerations, cite them and we can think

Supply chain process cycle

Similar Messages

Maybe you are looking for