Supply functions not working

Dear all
I have an upgraded CRM (from 4.0 to 2007) and apparently the supply functions e.g. in the component MSAACTIVITIES for the MSATaskList are not working. The implicit-flag on the anchor fills the business collection, but the supply function or an beforeQueryExecute trigger on the anchor both do not work, and if one is setting a breakpoint in there the code does not reach it. As these are SAP-delivered supply functions I hoped to find something on the OSS, but this is not the case.
Did anyone experience the same or has an idea here?
Regards, Kai

Hi,
do you mean anchor supply functions on tile or tileset level?
If on tile level, did you already check whether the both anchors hold a supply function or relation on a higher level e.g. on tileset or component level. In this case I guess this will win...
Regards,
Wolfhard

Similar Messages

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Copy/paste function not working in Firefox 22. Always good in previous versions

Copy/paste function not working in Firefox 22. Always good in previous versions editions

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

MDX -Children count function Not working in Case statement

Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
Santosh

Hi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Keyboard + mouse functions not working

After updating InDesign CC 6-days ago started to have issue with all keyboard + mouse functions not working ex. shift key does not constrain proportions when scaling. A restart fixed the issue thr first time. Today I have installed latest update and shut down and restarted several times does not fix issue. On a MacBook pro running OS X Mavericks 10.9.2.

Disconnected extrenal devices ie keyboard and Wacom Bamboo tablet and restarted computer seemed to correct the issue.

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before...

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT1977 I bought apps. My kid delet that after few weeks. Then I have downloaded to same ipad. But some functions not working.

I purchase some apps, my son deleted some. But I have download again from cloud. But some functions not working ask me to pay again. How can I use functions without paying again. Thank you

Search around on the app settings and see if there's a "Restore purchases" option.

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Help Needed With "Extend Marker" Function Not Working

I have several Clips and used the "DV Start/Stop Detect" function to find the time code breaks, which seems to work well. I've now got a clip full of Segment markers.
The problem arises when I try to use Extent Markers "Option + `" to make subclips. When I put the play head on a subsequent marker, the Marker/Extend function is grayed out.
Extending a marker that I have created using the M key works perfectly.
Why can I not use the Extend function on Segment Markers?
Any help on this is greatly appreciated. I have 30 odd clips that I need to set up segments for, and doing it manually will add hours to my workload.
Thanks
Gary
Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD Mac OS X (10.4.3) Final Cut Studio FCP 5.0.4

Thanks for the reply.
I am completely aware of items 1 through 3, and never Extend markers in the Timeline. Only the Viewer.
To perform an Extend Marker and avoid headaches, load the captured clip - the one with the video icon in the Browser - into the Viewer. Then, as you scrub along in the Viewer, Option-` as needed.
That is precisely what I am doing.
To Extend the marker I first double click the clip to load the entire clip into the Viewer, where all the Section markers are displayed. I then check Mark>Markers>Extend and the function is grayed out. However, if I move the playhead one frame prior to the Section marker, the previous Section marker extends to the frame prior to the new play head position.
If I do this with manually entered markers (using the M key, creating Marker 1, 2, 3.... in sequence on the Viewer timeline), then the Previous marker is extended to the frame immediately prior the the current play head position - i.e. from Marker 1 to Marker 2. I do not have to move off the Marker 2 position to be able to extend Marker 1.
Also, simply selecting all your Markers and either dragging them to another bin (or pressing Command-U) does not produce the needed subclips?
Of this I am also aware. I find the Command-U process just confuses the issue, creating more clips to manage (others may disagree). I prefer to simply drag the "Subclips" directly from the Main clip into a Timeline.
Because you're doing all this to get subclips, right? Or wrong?
If I understand your reply correctly, I think you misunderstood my problem. I have been using subclips for several years, and find them VERY useful, especially with multi-camera shoots. So, I am quite familiar with creating and extending markers.
I just started experimenting with the Detect feature and find it works quit well (most of the time). My problem is that the Segment markers created by the Detect process, do not perform the same as manually place markers, as far as the Extend marker function is concerned, anyway.
BTW - By using the TC display in my Panasonic PV-GS400 Camera, and sending the FCP video via Firewire to the camera, the camera displays the TC on the captured clip, which I then rename the marker to for TC reference. As long as the Date/Time on the cameras are properly synced, syncing clips in the Timeline is a breeze!!
Anyway, to clarify, my process is as follows:
1. Capture a clip.
2. Display the clip in the Viewer
3. Select "DV Start/Stop Detect" and watch as the section markers appear in the Viewer.
4. In Viewer, place play head on the first Section marker
5. Press the M key to Edit Marker.
6. Change the Name of the marker to the timecode of the Marker now displayed in the Camcorder window.
7. Use Shift-Down Arrow to move to the next Section Marker
8. Press Option+` to Extend the previous marker - which does not work and is grayed out in the Mark>Markers>Extend menu.
9. Back to step 5.
This process works perfectly with manually created markers. Because the Extend works if I move the play head one frame prior to the current Section marker, this tells me there is something "special" about the Section marker that disables the Extend function, unlike a manually created marker.
BTW - If I delete the Section marker, and create a manual marker at the same frame, the Extend marker function works again. Again, indicating that Section markers are different somehow from manual Markers.
Hopefully, this wordy explanation of my process clarifies my problem.
Aside: The clips are supplied to me by a customer on a 500GB FW800 drive. FCP5 was used to capture the clips from the original Tapes (which I do not have access to). I am the editor for the project.
Thanks again for the reply. It is greatly appreciated. If there is any other info that I have missed that will help figure this out, please let me know and I will post a response a quickly as possible.
Gary

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Supply functions not working

Similar Messages

Maybe you are looking for