Supply shortage, after heuristic run
hi guru s,
i run heuristic (for loc. product). then i c planning book, i c that for every product heuristic has planned, except one loc-product combination (say product A loc B). analysis .... i found that for that product (A), no planning object found(err msg). then i run consistency check, again run heuristic, and faced the same problem, e.g, no planning for 'A', showing supply shortage in the planning book at loc 'B', but demand was their.and this time no err msg.
there are valid transportation lane for tht (A) product . procurement type at source loc is 'E' , at desti loc. "F (loc B).
any help will be highly appreciated.
Regards,
Satyajit
Harish,
Thank you for your answer. No i didnt create planned order in rrp3, coz, i dont have setting for ppds, so i m not so confident to create planned order in rrp3 (actually i dont have much idea on apo), thinking that it might change the requirment. we r very near to go-live and on final testing.
no the all other products dont have PPMs in the model, but some of the products have PPMs.
And one thing what is special procurement type?.. I hve planned order setting -'apo order type' 31 (that is 'in-house production' ) for heuristic run (to genarate Planned order), in the destination loc. (plant). 'Model consys check' completed before.
Satyajit
Similar Messages
-
Automatic creation of PR after MRP run
Hi,
can anyone please tell me what all fields are picked up in a Purchase Requisition(PR) in the scenario of automatic creation of PR after MRP run.
If we are using more than 1 PR type in the system how is it determined during the MRP run that the PR will be created for which type.I understand that source list will have to be created and maintained but how is the PR type determined
Thanks in advanceIn PR the system checks for the material and vendor. See the steps below.
Step1:Auto PO tick in material master Purchasing view (mandatory)
Step2:Auto PO tick in vendor master Purchasing view
Step3:Maintain Source list for vendor and material (If u r not using source list for auto PO creation, the assign the Source of supply to a PR in ME56)
Step4:Maintain Pur. Inforecord
Step5:ME59n : execute for PR and Vendor In ME59n, you can also select the PR document type. If you want to select different document types, go for multiple entries and enter the doc types.
When u execute, the system will give the appropriate PRs. Select the required and convert to PO.
But through MRP you cannot create PO directly only Planned orders can be created.
Reward if helpful..
Thanks,
Srib -
Planned order created after mrp run instead of purchase req
Hi All,
I am facing a strange problem about planned order being created after mrp run jobs runs in background instead of purchase req. This is happening randomly. In the material master MRP view 2 procurement type is F and in the varient for the MRP job the in Purchase requisition control parmater 1 is marked that is purchase requisition. Also planning file is having the entry once there is shortage and hence MRP run is there always if there is shortage of material.
With Regards
TarunHi Tarun,
Please maintain the control parameters as
Processing Key NETCH
Create Purchase Requisition 1
Sched. Agreement Schedule Line 3
Create MRP List 1
Planning Mode 1
Scheduling 1
Please let me know the results.
Regards,
satyajit -
hi all,
is it possible to adopt vendor details in PR directly after MRP run ?
thanks in advancethanks tejas for the reply.
yes i want vendor to be adopt in PR after MRP run.
if i maintain Info record or source of supply for the material w r t vendor.
and if i run mrp then in PR vendor should adopt directly. is it possible ? -
Hi,
After MRP run we want the valuation type system should pick up automatic in generated Purchase requisition. Can you please confirm how it is possible ?Hi Sun Riser,
If purchase requisitions for materials subject to split valuation are generated within materials planning (Transactions MD01, MD02, MD03), the system does not supply a default value for the valuation type. The header record is generally used (without valuation type). This is standard behaviour please look at note 15297 Materials planning: No valuation type defaulted. Workaround is when you enter the valuation type during conversion PReq -> purchase order, an account determination is performed with the corresponding valuation type automatically
Regards,
R.Brahmankar -
Dear All,
Working on SCM 5.0
Whenever i change/load the T- Lanes , next Day the first Heuristic Run Fails.
After Changing the T-Lane , i do the following,
1. Consistency Check - Planning Areas.
2. Consistency check - Live Cache
3. Low level Code.
Then also i am facing the same problem?
Why ? and how can i resolve the same..
Regards,
Rajesh PatilYa ..when u change T-lane/Load new T-Lane first Heuristic Run fails ...and in application log of Heuristic Run ... for some product- locations the source location isnot showing?
But when i rerun(2nd time) the same Heuristic it is working fine?.
As i am taking Daily Run..
plz guide me when i Change the T-lane ...Except the above consistency check is there any thing to do?
So the Heuristic will run smoothly.
Regards,
Rajesh Patil -
Hello,
In SNP after executing Heuristic run it gives me error message "Invalid product-location combination (peagging Area)".
(/n/SAPAPO/SNP94)
can any body help me to reslove this issue.
Thanks,
NikhilHi Senthil,
I have created pagging area for location product( planning version 000 /n/SAPAPO/RRP_NETCH ).
but i am not able to assign location product to planning version 000.
It is already assign to Model 000 active model.
I am getting error message "No simulation parameters could be set for the active version".
i am getting error message in Heuristic run because of location product is not assign to active version 000?
Thanks,
Nikhil -
Schedule lines are not coming for HALB after MRP run
Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan KumarHi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3. -
Schedule lines are not coming after MRP run for HALB material
Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan KumarDear All,
I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
Thanks for all the reply.
Thanks & Regards'
Kundan Kumar -
How system will generate schedule line for PO after MRP run.
Dear Experts,
i have updated MPS in MD61, the period indicator was M (monthly), after MRP run, system generating schedule lines on daily basis for Scheduling Agreement(ME38), i want schedule lines on mpnthly basis, how to achive this,
thanks in advance.
regards
rajakarthikHi
1. Are you maintaining any Planning time fence period for MPS- No
2. What is the PIR qty you maintained in MD61:
i.) FG01 is having BOM child part RM01.
To produce 1 nos of FG01 , I need 1 nos of RM01
ii.) i maintained FG01 in MD61 with PIR Qty 5000. in MD61,Planning period is M and planning hirizon1- jan10To 31-Jan10
ii.) i maintained lot size:Monthly lot size for RM01.
iii.) there is no stock available for both RM01 and FG01.
3. After MRP how much qty is get planned on what date-
i) planned order created for FG01 in co41 with qty-5000 nos.
ii) in ME38, schedule line created for RM01, on 01-01-2010, with 5000 nos, currently Category of Delivery Date
field is D and delivery date is 01-01-2010, but i want Category of Delivery Date should be M and delivery date should be 01.2010.
thanks
raja -
Automatic creation of Schedule line after MRP RUN
Hi,
Till now we are using only PO for placing orders to vendor, now we want to use the functionality of scheduling agrement, so that after MRP run, we can get automatic schedule line creation, for this , what are settings required, how system create the automatic schedule lines based on which criteria, second thing while creating on eschedule agrement i found that the conditon which i can add for a vednor in ME21N that all condition are not coming while creating schedule agrement even my vendor is same for PO and Schedule agrement, so what are the setting required for this.
regards,
zafarHi
1.In material master purchasing view data auto PO is to be flagged.If scheduling agreemet with release documentation.
Then flag JIT indicator 1.
2.maintain MRP views in material master
3.In source list for fix vendor,source list usage 2 is to be maintained.
4.Vendor master purchasing data auto PO indicator is to be flagged.
5.Then when you run MRP automatically schedule lines are generated.
For JIT and forecasting maintain creaton profile in OMUP transction.
Assign the creation profile in scheduling agreement. -
PR created after MRP run, instead of schedule line
Dear all,
I want to create schedule lines automatically from the planning run, for raw material. I have maintained info record, scheduling agreement, quota arrangements and also the source list.
For the raw material, safety stock of 1000 nos. has been maintained. The current stock of the material is 0.
After MRP run, based on the upper level PIRs, schedule lines are generated properly. But, against the safety stock of 1000, a PR is generated.
I donot want a PR to be generated.
Please suggest a solution.
Thanks in advance,
Shrenik
Edited by: Shrenik on Mar 8, 2008 4:17 PMDear all,
I checked an found that the schedule agreement date does not have any effect. Even if the requirement date falls outside the date range, i am able to create schedule lines.
I also found that if i maintained GR processing time, then always a PR is created. If GR processing time is 0, then only schedule line is created. Moreover, planned delivery time does not have any effect on the calculations, even if it is 10 days, 20 days or 900 days.
Can someone please clarify all these? How are these times taken into account?
Thanks in advance,
Shrenik
Edited by: Shrenik on Mar 9, 2008 3:04 PM -
Creation of Purchase Order automatically via PR after mrp run.
Hi Experts,
I want to know that , after MRP run i got the no of PR'S. As i know , through MD04 i can create purchase order from particular pr but is their any option from which purchase order get generated automatically from pr's which are generated afrer MRP run.
Thanks n Regards
AnupamHi,
You can maintain source list Tcode ME-01 and make it MRP relevant by selecting Sorce list MRP relevant. In sorce list you can maintain vendor and material data valid for particular period and make it MRP relevant.
With this you can automatically generate purchase order from Purchase requisitions after MRP Run.
Regards,
Tushar Patankar -
Field "Mat Slip" (MTSNR) of MB03 is empty after i run BAPI_GOODSMVT_CREATE
Hello,
I'm doing BAPI_GOODSMVT_CREATE for moviment '315'.
After i run the BAPI, when i go to MB03, the field "Mat. Slip" is empty and does not appear on the screen!
I'm using the following parameters:
code= '04'
ITEM:
t_saida-matnr TO t_bapiitem-material,
t_saida-werks TO t_bapiitem-plant,
t_saida-lgort TO t_bapiitem-stge_loc,
t_saida-move_type TO t_bapiitem-move_type,
t_saida-erfmg TO t_bapiitem-entry_qnt,
t_saida-meins TO t_bapiitem-entry_uom,
t_saida-ummat TO t_bapiitem-move_mat,
t_saida-umwrk TO t_bapiitem-move_plant,
t_saida-umlgo TO t_bapiitem-move_stloc,
t_saida-sgtxt TO t_bapiitem-item_text.
HEADER:
t_bapiheader-pstng_date = sy-datum.
t_bapiheader-doc_date = sy-datum.
And when i run the same process with MIGO, the field appears.
Best Regards,
Reginaldo BorgesHi,
You have to fill in the header:
t_bapiheader-REF_DOC_NO = 123456. " your nota!
Best regards,
Leandro Mengue -
Purchase req type after MRP Run
Ca we control the type of Purchase req after MRP Run.
Now for every material it is creating "NB" type purchase req.
Can we control it material type or by mat number.
We have 2-3 purchase req types in system for Material.
Amit ShahDear ,
Goto -OPPR-Enter Plant Code and Maintain MRP Group -0000( as SAP Standrad for External Procurement ) -Select Scheduling /Doc Type tab -Here you can assing the PR type as per your requirement so the while MRP run , it will selct the PR documents types based on OPPR .At the same time , assing this MRP group in MRP1 view of the material .
Try and come back
Regards
JH
Maybe you are looking for
-
DSC 8.6.1 wrong timestamps for logged data with Intel dual core
Problem Description : Our LV/DCS 8.6.1 application uses shared variables to log data to Citadel. It is running on many similar computers at many companies just fine, but on one particular Intel Dual Core computer, the data in the Citadel db has stran
-
Can anyone help to resolve the "bad pool banner" issue please?
-
Here’s my dilema…. I want a PDA type phone so that I can combine my calendar and address book all in one device. I want to be able to enter addresses and calendar info using my full size keyboard at my laptop then sync it to my new smartphone. I h
-
Retaining timecode when exporting from Quicktime
I want to use imovie to capture video I will eventually edit in Final Cut Pro. The .dv clip that is captured in iMovie resides inside the iMovie project file package. When I import it into Final Cut Pro, the audio needs to be rendered because it is s
-
Do we have INDIA map in map components
Hi All, I have query..... I need to take India map and create dashboard on it using the states. If once i click on the respected state the chart has to dispaly the sales value of current year and precvious year in the column chart. And also if we cli