Supply shortage Alerts regarding Prod substitutions
Dear All,
In the background jobs for generating supply shortage alerts we are getting error as Internal session terminated with internal error (See St22) . I checked the activity and the macros assigned is Supply Shortage.Selection ID's ,macros are assigned correctly but still the job is getting failed .Are there any macros which are to be assigned in the activity before Supply Shortage macro.If so plz let me know and why these macros has to be included in addition to supply shortage.The same error message is displayed to generate alerts for shortfall below safety stock,target stock level exceede and target stock level short fall.Is there any settings iam missing.
Quick response is appreciated.
Thanks,
Dhanunjay.
Hi Dhanunjay,
You need to include the default macro in the activity as the first step as in the background jobs the default macros are required to calculate Projected stock, stock balance etc to make the supply shortage alerts work.
Let me know if it helps
Regards
Gaurav
Similar Messages
-
HI Experts,
Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
But i am not sure why this error has come and resone behind that.Please advise.
From: Oracle OEM [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 11:21 PM
To: DBA_GROUP
Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Target Name=PROD.test.edu.au
Target type=Database Instance
Host=delhi.win.test.edu.au
Occurred At=Feb 22, 2011 11:20:33 PM EST
Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Severity=Critical
Acknowledged=No
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
when i check the alertlog file i could see the following
Tue Feb 22 23:01:36 2011
Starting control autobackup
Control autobackup written to DISK device
handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
Tue Feb 22 23:22:42 2011
Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
PLease let me know the cause of the issues and solution to overcome this issues.
Regards,
SalaiIt would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA. -
Supply Shortage Report question
Hi
Supply Shortage Report question:
In my cube I have material, 0calday, receipts and demand key figures.
Formula for Supply Shortage = Receipts u2013 Demand.
Users want to see number of consecutive days a particular productu2019s Supply shortage value is below zero.
Input criteria:
Date range:
Consecutive days:
For e.g. If user enters date range as u201C06/01/2010 u2013 07/31/2010u201D and Consecutive days as u201C4u201D they want to see all the products which have u2013ve Supply shortage values consecutively for 4days or more.
Can anyone tell me how we can accomplish this in Bex? Thanks in advance.
Regards
SreeHi,
Please check the follwoing option.
Load the msae data in one more DSO which will be a lookup DSO. In that DSO theer will be a daily load with the date as "Historization Date" which will keep the Current date with every load. In that DSO calculate Shortage Indiactor
Shortage Indicator 1 if Receipts < requirement.
By doing this you will be having Data with Historization date (Daily) with an Indicator for Shortage.
Now while loading this cube populate one Chracteritics a Shortage Counter by doing look up theis DSO.
You need to Indicator in the DSO with today's date and historization date and you need to add the counter on the basis of avilable consecutive entries by putting a loop for the same.
By this approach you may achieve your need.
I hope it will help.
Thanks,
S -
Supply shortage, after heuristic run
hi guru s,
i run heuristic (for loc. product). then i c planning book, i c that for every product heuristic has planned, except one loc-product combination (say product A loc B). analysis .... i found that for that product (A), no planning object found(err msg). then i run consistency check, again run heuristic, and faced the same problem, e.g, no planning for 'A', showing supply shortage in the planning book at loc 'B', but demand was their.and this time no err msg.
there are valid transportation lane for tht (A) product . procurement type at source loc is 'E' , at desti loc. "F (loc B).
any help will be highly appreciated.
Regards,
SatyajitHarish,
Thank you for your answer. No i didnt create planned order in rrp3, coz, i dont have setting for ppds, so i m not so confident to create planned order in rrp3 (actually i dont have much idea on apo), thinking that it might change the requirment. we r very near to go-live and on final testing.
no the all other products dont have PPMs in the model, but some of the products have PPMs.
And one thing what is special procurement type?.. I hve planned order setting -'apo order type' 31 (that is 'in-house production' ) for heuristic run (to genarate Planned order), in the destination loc. (plant). 'Model consys check' completed before.
Satyajit -
Dear all,
Oracle 10.2 on AIX 5.3
I am getting these errors in my alert log.
ORA-12012: error on auto execute of job 42568
ORA-04063: ORA-04063: package body "EXFSYS.DBMS_RLMGR_DR" has errors
ORA-06508: PL/SQL: could not find program unit being called: "EXFSYS.DBMS_RLMGR_DR"
I first uninstalled the EXFSYS schema and then installed it again. Then I tried to install the Rule Manager. and I get another error
SQL> @ ?/rdbms/admin/catrul.sql
begin
ERROR at line 1:
ORA-20000: XDB component not found. XDB should be installed prior to Rules
Manager installation.
ORA-06512: at line 3
How can I install XDB component. Please helpMaybe due to forum bug, thisthread is duplicate :
Errors in alert log PROD
Nicolas. -
Supply chain alerts generated from external services
I am interested in having supply chain alerts generated from external services.
An example could be an alert based on predicted temperatures over the next few weeks, which would be of use to demand planners using SAP SCM.
So we would need an external service providing predicted temperatures, which could be modelled by the new SAP BPM tool to generate alerts for users.
Has anyone any experience of this?
Thanks,
Bob Austin, Atos OriginHi,
I have been involved in the building of UI-layer where we used the ES provided from SAP as of the latest releases for DP. I would suggest that you have a look at these services as I assume the external application would be able to call APO DP and input the data using these services.
From a technical standpoint we had no problems to use the services provided from SAP. The only area where we ran into some issues was the authentification where we had to build some new web services to handle some customer-specific requirements. But I assume you would not even need these specific features in your scenario.
Have a look at this link to find all the detailed information:
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=FA437A82630A11DA36BB000F20DAC9EF
Good luck
Fredrik -
Regarding user substitution in SRM
Hello Experts!
I have a case in production system. SRM
Here a user A is subsitituited by another User B (Active Substitution) to receive the SC for approvals in place on A's absence.
Here B is recieving A's SC for approvals, but the user A still recieves the Lotus Notes Email initmating about the apporval..
Please let me know is ther any setting or action required to enable User B recieve the Lotus Notes intimation.
Thanks
Vj SamHi
You can check OSS note 794226, according to this note:
<i>"Active substitution is supported
Passive substitution is not supported
Position-related substitution is not supported"</i>
This means that if user B is an active, personal substitute, he will get the notification to.
The workitem will however only exist once, no changed there - the result of this is - of course that i User B executes the item, User A will still have the Lotus Note mail, but when he enteres, the workitem will not exist anymore. So - it's a goos idea to try to describe this in the notification mail
Regards
Morten Nielsen -
Will the 5508 send alerts regarding ap join statistics?
Hi,
I'm wondering if the 5508 wlan controller can send me notifications of wap up/down conditions? I'm trying to provide a monitoring solution for a client who has the 5508 controller, and I was looking at WCS, but this line of the WCS literature threw me off..
"WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points."
So, if the WCS does all that the wlan 5508 does, how do I get my 5508 to send me email notices when an AP had fallen off?
Thanks--
CatHi Cat,
I dont think that a wLC acn send notification or alert for Radio UP or down.
The only is WCS or NCS/PI.
Check this link:
http://www.cisco.com/c/en/us/td/docs/wireless/wcs/7-0/configuration/guide/WCS70cg/7_0event.html
Regards
Dont forget to rate helpful posts -
Logic board replacements: supply shortage!
I've seen a lot of threads on here encouraging anyone with a whining MBP to send it in for no-questions-asked logic board replacement, so I wanted to post a quick caveat...
My MBP has been in the repair queue at the Apple Store for a week and a half, and they're still waiting on shipments of logic boards; from what AppleCare can tell, it looks like supplies are hugely diminshed at this point, and the only stock of MPB logic boards is what the individual Apple Stores have on-hand.
Maybe I'm just unlucky, but chances are that if you're hoping for a one-day turnaround in a shiny yellow DHL box to stop the whine, you'll have to wait a bit longer...My condition with regards to work isn't quite as bad as yours, however I did realize that as soon as I dropped the machine off I had forgotten to commit my last day and a half of work back to Subversion, so I've been just idly touching up things here and there as I don't want to waste a whole day and a half re-implementing something that's stuck on a 2.5" chunk of steel. sigh
Although, if there is a shortage, I'd better get cracking on re-doing that day and a half of work or I'm going to be even further behind on my projects. Thanks for the confirm.
My MBP is CTO, so I'm pretty much screwed on trying to get a replacement before the logic board comes in. I don't think I'll have lost any clients (I've been doing new stuff on my old PB) but I'm definitely not in a comfortable position wrt my existing work. Ah, the perils of computerization.
There is good news: I remember this happening back in the day with the problem-plagued old G3 iBooks, and many of those were just replaced with more recent boards as they became available. Maybe I'll get a 2.16 out of it. -
Regarding Variable Substitution
Hi Everyone,
I am using Variable Substitution for the target filename. target structure is shown below. I want to capture ProductionStartDate and ProcessOrderNumber from the payload. How do i specify them in the Variable Substitution table under Reference
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Root PublicationDate="2009-07-02T06:30:38Z" xmlns:ns1="PMI-SAP-PSS4">
<ProcessOrder ProcessOrderNumber="222222222" ProductionStartDate="2009-07-01" ProductionStartTime="12:08:00" Action="CANCEL">1-20090701-222222222-c.xml</ProcessOrder>
</ns1:Root>
Regards,
VarunHi,
Please see this example, it will help you to form yours:
If the variable refers to an element in XML schema, add the prefix payload: to the information under Reference. The reference then comprises a pseudo path description in the form of a comma-separated list with the schema namea,na,nameb,nb,....
namea,nameb,...corresponds to the element name and na,nb,... corresponds to the occurrence of the element name at the respective level in the document.
The description begins at the root of the document and ends at the respective element.
To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (u201CExample Valueu201D) is set as the value for a specified variable.
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
<e1>
<e2>Data_1</e2>
<f/>
<g attr="abc">text</g>
<e2>Data_2</e2>
</e1>
</dummy>
<e1>
<e2>illegal/value</e2>
<f/>
<g attr="abc">text</g>
<e2 attr="fghij">Example Value</e2>
</e1>
</root>
Regards,
Shweta. -
Why has BC stopped sending us email alerts regarding workflow or online form submissions?
It appears our site has stopped alerting us via email regarding online form submissions...what's going on with this? www.smilegalaxykids.com
BrentIt appears the "orders" box is checked as it should be....and I know we haven changed anything recently on our end. (see screen shot attached)
-
could not initialize the application's security component .the most likely cause is problems with files in your application's probile directory.please check that this directory had no read/write restrictionsand ur hard disk is not full or close to full .It is recommended that you exit the application and fix the problem.if you continue to use this session ,you mightsee incorrect application behaviour when accessing security features....THIS IS THE ALERT I GET WHENEVER I TRY TO OPEN FIREFOX.
See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component -
ME32L / ME38 / VL31N managing supply shortages
Hello,
my users create inbound deliveries in advance such as manifest.
In fact, user want to control suppliers, they create inbound deliveries and then send manifest to suppliers with the material to supply.
But the supplier could not supply some material : so my users in VL32N must modify their inbound deliveries : quantities : SAP created history on these modification.
Is there a standard report or a way to display :
Quantity to supply from the vendor asked by customer versus quantity really supplied with the inbound deliveries.
Thanks.Hello,
If you Execute T_code ME32L with a Scheduling aggrement , now in this screen select the item and on the menu bar in that select the Confirmations --> Overview .
This will display the inbound quantity and the GR quantity.
i.e
Quantity to supply from the vendor asked by customer versus quantity really supplied with the inbound deliveries.
Also you check T_code ME2A.
Hope this will solve your issue.
yogendra
Edited by: yogendra kulkarni on Feb 19, 2009 4:19 PM -
TS3992 My screen frozen due to icloud alert regarding delayed back-up.
I get the alert meaagse from my Ipad2 : This iPhone hasn’t been backed up in 2 weeks. Backups happen when this iPhone is plugged in, locked, and connected to Wi-Fi. Although I apply the suggested resolution; I still can not get the back-up started; and my screen is frozen and does not accept any commands ( I can not tap on any other icon ) . Pls help. Thnak you in advance .Kursat
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Hi Gurus,
Can anybody tell me pl. Suppose i have 2-3 production orders and i didnot want one of it then how can i delete that order?
its urgent pl. tell me.
Thanks,
NirajHi Patil,
One cannot delete the production order, one can only set the deletion flag to the production order. Provided the balance in the production order is zero. i.e. either no confirmation, goods issue, or goods receipts have happened hence the balance will be zero. Even if the above have happened then the order is to be settled and then the deletion flag can be settled.
The deletion flag can be set from the funtions menu-->deletion flag-->activate, in change of production order
Hope this will resolve your problem.
Reward points suitably.
Thanks & Regards.
Santosh Joshi
Maybe you are looking for
-
Need help to partition and format new hard drive for T400
The HDD failed in my T400. I bought a new 1TB HDD and fitted it. The diagnostic software in the BIOS did a read and controller test (Passed). When I put the Windows XP disk in the CD reader, the setup started - then stalled at the "Windows setup" pag
-
Web query- save view locally (in favorites folder)?
Hello all, is it possible to save a query view locally (in ones favorites folders) when only working with a query on the web? Thanks in Advance! Elisabeth
-
Adobe form print - ADS - without Java engine
Hi Experts, Is it possible to use the ADS (Adobe Document Service) to print Adobe form WITHOUT active Java (J2EE) engine? If yes, how can I manage to work? What about using the Virtual Machine Container (VMC) for this purphose? Currently when I selec
-
I am trying to download CC 2014 onto a new Mac with Yosemite 10.10.2, newest version, but it will not hold the internet connection for more than a few minutes so the download keeps failing. Can anybody help please. All the other devices in my house a
-
Still trying to configure a Cisco 877W router
Hi, I am still unable to configure my Cisco 877W router for use on a B.T. ADSL phone line. I can log in to the router which starts up the SDM Express. I then select the wizard and get as far as filling in the DHCP server configuration. When I then pr