Support dates GRC 5.2 & 5.3
Hi,
I am trying to find details of the dates up to which it is expected that GRC 5.2 and 5.3 will be supported. If anybody has information on this or where I can find out I would be grateful.
Thanks,
Gary
Hi Gary,
Just go through with the following link.
https://websmp130.sap-ag.de/pam
or
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/support/scl/default.htm?usecaseid=8&showheader=X&startpage=-&searchstring=access+control&referredserver=https%3a%2f%2fwebsmp108.sap-ag.de
You will find the required details.
Regards,
Mohit
Similar Messages
-
List view error "Filter Value is not in a supported date format"
I've column "Name = Order Status","Type = Calculated" & Data Type = "Date and Time". I've given this Condition in the formula:- =IF(NOT([PO Date]=0),"ORDERED","NOT ORDERED"). I'm trying to create view
for this column but its getting error while create the view "Filter Value is not in a supported date format".
Same error I'm getting for column "Name = Status","Type = Calculated" & Data Type = "Number". I've given this Condition in the formula:- =IF([PO Date]="","",IF(NOT([Balance Qty]=0),"OPEN","CLOSED"))Can you check data type returned for your calculated column 'Balance Qty'?
Try to set it as Number. It may help you.
Thanks. -
We are currently supporting an older application which will no longer be patched for future browser releases. We need the end of support date, so we can plan accordingly. Any assistance is truly appreciated.
Hi Tony, and thanks for the reply. I was hoping that might be the case.
Does Mozilla not publish lifecycle dates for Firefox? The reason I am inquiring further, is that our intention is to have upgraded the product we are currently running by late August of next year. I was trying to determine if 3.6 would be supported through August of 2012. I probably should have been more specific with my initial post. -
Supported date formats for sorting
Can someone point me to a document describing the supported
date formats for sorting? I mean, how should I format a date column
in an XML dataset in order to have this column correctly sorted
using the Spry framework?
Thank you and sorry if the question is trivial.Thanks, what I have done for the moment as a temporary
solution is to use the two date formats and have them both inside
the one cell in the table (the column for the sortable date
yyyy-mm-dd). In my CSS I have created a style for the first date
that has it's visibility as hidden. That way it's sorting the Date1
but only Date2 is being shown to the users as the other cells have
more than one line of text it doesn't look too off centre.
<div spry:region="ds2">
<table width="662">
<tr>
<th width="127" class="eventhead"
spry:sort="Date1">Date</th>
<th width="151" class="eventhead"
spry:sort="Type">Type</th>
<th width="146" class="eventhead"
spry:sort="Title">Title</th>
<th width="189" class="eventhead"
spry:sort="Venue">Venue</th>
</tr>
<tr spry:repeat="ds2" spry:setrow="ds2">
<td height="53" class="event">{Date2}<span
class="eventhide">{Date1}</span></td>
<td class="event">{Type}</td>
<td class="event">{Title}</td>
<td class="event">{Venue}</td>
</tr>
</table>
</div>
</div>
It seems to be working for the moment... -
Hi,
Could you please tell me what is the lifetime support dates (Premier Support, Extended Support, Sustaining Support Ends) for JDeveloper 11g.
Thanks.It doesn't seem to be listed on the lifetime support pages, but I'm sure if you file a quick SR, you'd get an answer fast.
John -
I've tried using "Service Advisor" option in CAM to try to collect support data I get the error "The device has been unregistered from this application. Please close this service advisor window.".
How to fix this?
Thank youHi.
1. You can use command line for collect support data.
/opt/SUNWsefms/bin/supportData -d <array_name> -p /tmp -o supportdata
Result : /tmp/supportdata.zip
2. For trubleshuting current problem, please show result of:
cd /var/opt/SUNWsefms/store/Reports
for i in report* cache*
do
echo $i
perl -ane '/[^[:ascii:]]/ and print;' < $i
doneHow many arrays registered in the CAM ?
Check that for this array work next point in CAM:
-> Trubleshuting -> FRU
-> Trubleshuting -> Events
Regards. -
Urgent (how oracle support data warehouse)
i hear a lot about data ware housing .
what does it mean? and how oracle database support data warehousing??/
Thanks a lotRead the Data Warehousing Guide.
-
Oracle HTTP Server Support Dates
What are the lifetime support dates for Oracle HTTP Server 10gR3 ?
Thanks, Richard.Yes, Oracle HTTP Server will communicate to the J2EE container (OC4J) via mod_oc4J. It is completly supported starting 9.0.2, out of box.
Regards
Pavna Jain
Oracle9iAS Product Management Team -
SQL Server versions Mainstream Support Dates for 2005 and 2008
What is the link to Microsft's official published Support dates for SQL Server 2005 and SQL server 2008.
There are several conflicting reports and am looking for the official MicroSoft link so it can be shared as needed.Hello,
Please refer to following blogs
http://blogs.msdn.com/b/sqlreleaseservices/archive/2011/01/27/end-of-mainstream-support-for-sql-server-2005-and-end-of-service-pack-support-for-sql-server-2008-sp1.aspx
http://support.microsoft.com/lifecycle/search/?sort=PN&alpha=sql
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Trying to find support dates for System Messaging v6.0
I was looking around on the Sun site to find whether System Messaging v6.0 is still under support or not. Can someone point me in the right direction or tell me what the support dates are for it?
This is the actual REV level we have. Sun Java(TM) System Messaging Server 6 2005Q4 (6.0,REV=2003.10.29)Hm. As is stated in the header for this forum, the best way to get your version is to run:
imsimta version
and paste the results here.
2005Q4 corresponds to version 6.2, and is supported. Many patches are available to the public at:
http://sunsolve.sun.com
The current version is part of the "communication suite 5", or Messaging Server 6.3. -
WRVS4400N Models / EOL Support Dates
Forum,
Can someone please provide official End of Life Support dates references for the WRVS4400N models. I have owned this device for quite sometime and feel it needs to retire.
Cisco,
You could have provided better support by releasing a DD-WRT version of firmware along with more frequent IPS releases. I personally will never purchase any of your SOHO UTM style devices ever again. While I have not experienced any nightmares with the device, I am not exactly impressed with your abandoning support for the device without official notices.
I know of multiple security issues with the device that "SHOULD HAVE BEEN ADDRESSED", but Cisco never took action. SOHO devices like this could have better support models if you followed some of the open source community models. I won't go into the security issues here out of respect for others.
Things Cisco could of done:
1. Release IPS signatures more frequently - I can count on one hand the number of releases you provided.
2. Release a DD-WRT version of the firmware - the communities could of taken the ball and ran with it and made customers much happier at low cost for Cisco. WIN WIN for everybody and increases customer satisfaction.
Results of not supporting the SOHO device(s):
Cannot speak for anyone else here but I work on really large IT contracts (millions $+). Your sporadic support makes me feel less confident about Cisco overall. In the long run I definately won't recommend your SOHO products to ANY future customers, and I will be more wary of your more expensive security hardware.Hello Rrathbun and thanks for participating in the Small Business Support Community. It seems you did not get the service you expected and I'd like to escalate your case if possible. Can you please provide me with your Small Business Support Center ticket number(s)? You can either post here or email me directly (streaves at cisco dot com).
If you have not yet opened a support ticket, please do so ASAP. You'll find a list of contact numbers here: www.cisco.com/go/sbsc. The US Center is available 24/7 and there is never a charge for warranty support.
Thanks,
Stephanie Reaves
Cisco Small Business -
PowerPivot supported Data Sources [Oracle]
Reading about
Supported data sources in Office help page I see:
'.NET Framework Data Provider for Oracle Client'
Does this refers to Oracle's ODP.NET Managed dll?
I succesfully installed Oracle's managed dll with xcopy/deployment [platform: both] [machine wide:true] but trying to create a connection with the wizard in PowerPivot ('Get External Data' -> 'From Other Sources' -> 'Oracle' -> 'Advanced' ->
'Oracle Data Provider for .Net') I still see in the connection string textbox the following message:
'Unable to find the requested .Net Framework Data Provider. It may not be installed'
I'd wish to connect from a Windows 7 x64 pro with Office ProPlus 2013 x86 (without installing the complete Oracle Client and hopefully no TNSNAMES) to some tables from a remote Oracle Db server.
Thanks in advance for any info
MarcoThank you Ed for your kind attention, still working on this though I found a couple workarounds...
It looks like the .NET provider Excel/PP UI refers to is still the deprecated System.Data.OracleClient stuff, am I right?
Btw I think my OP still partially make sense, so I'll try to elaborate a bit.
As Excel/PP UI is (was?) able to let final user interact with a managed assembly/provider is there any way to use official Oracle ODP.Net driver instead?
I know that installing Oracle Client everything could work with Oracle
OLEDB Provider.
I know how to write code in a VSTO Excel solution using Oracle managed access .NET Provider to connect to db server data
without installing Oracle Client and without TNSNAMES but how to let final PP user being able to create a data connection through fully managed code, using only 'Get external Data' wizard through PP?
My first class target is still about being able to deploy Excel/PP personalized BI solutions to Oracle power users without having to install and configure Oracle client.
Is this possible?
Marco -
Dear all,
I'm asking about the End-Of-Support date of the ASR9K boxes, I've found some documents about IOS XR not about the hardware itself.
Actually we are going to consider bunch of these boxes in the core network, so I wanna know how many years approximately they could last.
I appreciate your help guys.
Thanks & Best Regards,
Osama | IP Core Network EngineerHello Osama,
So far I don’t see any end of life in the roadmap. The product is too good to end it
Even if/when it is announced, there is still 5 years of support after an announcement.
Regards,
/A -
Java MQ 3.6 End of Support date?
Is there an announced date for the End of Support of Java System Message Queue 3.6?
TIA!The following are the end of support dates for MQ 3.6
Product Name Prod Status EOL Date Full Support End Date Limited Support End Date (EOSL)
Sun Java System
Message Queue 3.6 SPx EOL 08/2008 08/2009 08/2013
There won't be any bug fixes after Full Support End Date. -
Support Date for OEL 5.5
Is there an official document that provides supported dates for OEL5.5
-TUnless someone has a better answer... did you check http://linux.oracle.com ?
Under "Support policies" you can find a document that links to:
http://www.oracle.com/us/support/library/elsp-lifetime-069338.pdf
Maybe you are looking for
-
Asset Transfer with two company codes
Hi We have a requirement in which we need to transfer the asset from one company to another. However, there is VAT calulated on the transfer of asset from one company code to another. We need to create an invoice, calculate taxes and then transfer th
-
Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server
Hi All, I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform. One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 3
-
Cant download pdf, swf and pptx in Adobe Connect !!!
Hi, we cant download documents in Adobe Connect, system write writes "it is impossible to transform a file". We cant download all types files, in many adobe connect rooms, what happened?!
-
Hi everyone, Just describe what i faced with. I solved to create CCR Exchange 2007 in my test lab, and faced with if i try to install these roles of exchange: cas1 - cas/hub mbx1, mbx2 - CCR MBXes i got unwork configuration. Test users cannot send a
-
Ikon CPP 550 not working under Snow Leopard, please help.
I tried to install the drivers for this. I am using the Fiery X3eTY2 65C-KM PS Color Server v1.0 as the selected driver since that is what I've been using prior to 10.6. But now everytime I go to print, I get this "The printer software was installed