Support for 4.x sensor signatures

Just a short question: does anybody know how long will there be development of signatures for 4.x sensors ? Will they be for free or is there also subscription on the way ?
THX

Thanks for your answer. What interests me most is for how long will the signatures be developed ?

Similar Messages

DNG Converter 7.4RC - support for X-trans sensor?

Hi, the ACR 7.4 download pages says it "includes a correction to the demosaic algorithms for Fujifilm cameras with the X-Trans sensor". Is that correction also included in the DNG converter 7.4?
Thanks

ssprengel wrote:
An exception to this would be for Linear DNGs that have already have been demosaicked, but still retain the raw property of absolute white-balance and camera calibration adjustments, right?
And Lossy DNGs that are resampled from their original resolution (which requires that the file be a linear DNG).

Fujifilm RAW support for X-Trans sensor

The"water color effect" in Lightroom is now gone. But what about the DNG-converter?

ssprengel wrote:
An exception to this would be for Linear DNGs that have already have been demosaicked, but still retain the raw property of absolute white-balance and camera calibration adjustments, right?
And Lossy DNGs that are resampled from their original resolution (which requires that the file be a linear DNG).

Support for Pentax K20D RAW?

The Pentax K20D employs a CMOS sensor that seems not to be supported by Aperture. I don't really know if the Pentax DNG alternative captures everything that the new sensor can deliver (that's ignorance not doubt, btw). I know the PEF format does.
Is there any way to know how soon Aperture might have native support for the new sensor used in the K20D?

Supported cameras are listed here:
http://www.apple.com/aperture/specs/raw.html
Apple doesn't discuss updates typically, so no ETA on if/when it will be supported. Once of the things on Aperture 2.0 was that future camera support should hopefully come more quickly, but the only way to really know is to submit feedback and wait.

No Support for Windows 7! Extremely Frustrated! Help!

Ok, so here's the deal. I have TX1220us tablet pc. It came with Vista 32-bit Home Premium on it. Everybody knows that Vista is a resource hog, and running the 32-bit version on a 2.2 gig 64-bit processor is a complete waste of performance capabilities. So, what's the ideal thing to do? Upgrade to Windows 7 Ultimate of course! Not so easy... After upgrading, almost nothing works properly on my computer. I did this 8-10 months ago, and immediately noticed the problems. My CD/DVD Lightscribe Drive only functions partially, it only reads some discs and won't burn anything. The fingerprint sensor doesn't function at all. Worst of all, the digitizer (touchscreen) is no longer touch sensitive. The quick launch buttons werent working for a while, but I installed some vista drivers, and luckily was able to get 2 of the 4 to work.
So what do I do? I talk to HP Support for help. Unfortunately, the only "support" that I could get out of them was in the form of a few sentences. "Unfortunately, HP does not recommend upgrading from the pre-installed operating system. HP does not support anything but the pre-installed operating system" and "This is something that HP is currently developing, and we will update the support page as soon as updates are available for your hardware". The irony of this all is this: At the exact time that HP gave me the first statement, there was an ad with a link from HP on the right margin of my models support page stating "The Wait for Windows 7 is Over! Upgrading your computer has never been easier!".
Again this was 8-10 months ago that I went through all of this, and now I finally decided to give it another try. You'd think in 10 months that they would be able to develop some sort of updates for customers. Wrong... I once again received the exact same responses with absolutely no sense of concern or care for the happiness of a customer from the support representative. I have finally decided that this is some sort of marketing scheme or sales scam to force their customers to go out and buy a new computer, even though there is no need for it. My laptop is 300x faster on Win7 x64 than it was on Vista, and after paying for an expensive new operating system for a tablet that i purchased only 3 years ago for $1,600 I have no intent on going out and purchasing a new one just so I can run Windows 7.
Does anybody know who to talk to about getting issues like this resolved or to get compensation for HP's complete lack of care for customer satisfaction? Any info would be nice. Finally, if anybody has come up with a way to get this system working properly on Win 7, I'm open for suggestions. I have tried installing HP Vista drivers on my system, but when I run the setup packages, they exit out saying that the setup programs are designed for windows vista, that it has detected a different operating system, and that the setup will now exit.
Help!
tx1220us - Windows 7 Ultimate x64 - Nothing but problems

I think you would be very surprised at how many of your drivers are supported natively by Windows 7. I have an even newer AMD laptop which I installed W7 on and had to install very few drivers. Running Windows Update manually from Control Panel and choosing to also see 'Optional' updates gave me those.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Nomachine NX/FreeNX, can't get 3D accelearation support for Virtualbox

Greetings to everyone!
I have a problem, which hopefuly someone knows how to solve?
I've installed everything I needed for one small headless testing server based on Arch linux (x64, kernel 2.6.32 and X.Org X Server 1.7.3.902 (1.7.4 RC 2)), and have setup only basic stuff and services (I've attached rc.conf file)
In addition I've setup also a desktop enviroment based on LXDE (in case of problems but it's stared manualy only when need and by NXclient or ssh -X), NVIDIA drivers (v. 190.53), VirtualBox 3.1.2 and VMWare Server 2.0.2 (x64).
When I'm working directly on computer everything is working just fine and I have support for hardware acceleration in Virtualbox, but when I try to use it from remote location (eg. using NX client, or using X forwarding over SSH), I can't get access to 3D features of VirtualBox (3D acceleration and 2D acceleration buttons are greyed out!), also when I try to access NVIDIA settings panel it says "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." Well I'm pretty sure I have drivers installed, but is there any chance they are badly configured?
I really Arch linux and would like use it as my main distro and really would like if someone can help me find a solution for this problem, (especially knowing that the same things IS working on my second and much older computer based on Intel Pentium 4 (2.0 Ghz), ASUS P4B533 Asus GF4 MX440 graphic card Ubuntu 8.04.3 LTS), and that it's a bit frustrating
The newer computer is based on AMD Athlon II X2 240, Gigabyte MA770-UD3, and Gigabyte 7300GS graphic card.
I've tried so many tutorials, many found on this forum, tried with different GUI (KDE, GNOME, LXDE) in case i "skipped" something and nothing helped me..
Checked everything (I know) twice and even more, but no success.
Is there some way to use hardware acceleration over remote sessions , am I missing something or is "the resistance futile" ?
I'm sending my rc.conf, xorg.conf file, so if someone has more expirience with it?
Thank you.
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="hr_HR.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Zagreb"
KEYMAP="croat"
CONSOLEFONT="lat2-16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt vboxnetadp fuse)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="kiklop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal network netfs crond @openntpd sshd cpufreq sensors @samba @smbnetfs @proftpd @vmware @ddclient @webmin)
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
# Load "dri"
# Load "dri2"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "True"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G71 [GeForce 7300 GS]"
BusID "PCI:1:0:0"
# Option "UseFBDev" "true"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "True"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "RegistryDwords" "PerfLevelSrc=0x3333"
Option "RegistryDwords" "PowerMizerLevelAC=0x3"
Option "OnDemandVBlankInterrupts" "True"
Option "Coolbits" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Greetings to you all from Zagreb (Croatia)

The thing is I don't have any problem when I'm working in front of computer, only when using remote sessions (like NX, VNC, etc.).
I can install additions, but I can't select 3D acceleration checkbox (it is disabled - grayed out) in Virtualbox, or use any graphic hardware advanced feature on computer when I'm using remote session, but it's enabled when using local session.
Even when I try (when connected over NX) commands like glxinfo | grep render
it says something like "not using direct rendering", looks like it's not even using nvidia driver, output show mesa driver is in use?
Could it be something with remote access, remote access rights or something like that?
During installations was following mostly tutorials from Arch Wiki.
Maybe I missconfigured something, or didn't configured at all?

I want to cancel my Adobe Creative cloud anual signature, to change for only the photoshop signature.

I want to cancel my Adobe Creative cloud anual signature, to change for only the photoshop signature.

Hi Andrec73513286,
If you are at a point in your membership where you could cancel yourself the process is explained here: Cancel your membership or subscription | Creative Cloud
Otherwise, you'll probably need to contact our customer support for assistance
Contact Customer Care
- Dave

Chinese language support for adobe reader for HP WEBOS?

is there any traditional chinese language support for adobe reader for HP WEBOS?
if yes, where can I download?

Pat, I got an answer this morning. Not sure if you saw it because I don't see it posted here for some reason. This is the answer:
Re: forum support for Adobe Reader
created by Nikhil.Gupta in Adobe Reader - View the full discussion
The request being sent to the akamai server, (even when the Reader updater setting is turned OFF) is for updating the Adobe Approved Trust List (http://www.adobe.com/security/approved-trust-list.html).
The Adobe Approved Trust List is a program that allows millions of users around the world to create digital signatures that are trusted whenever the signed document is opened in Adobe® Acrobat® or Reader® software. Essentially, both Acrobat and Reader have been programmed to reach out to a web page to periodically download a list of trusted "root" digital certificates.
If you want you can specifically turn off the auto update functionality for the same by navigating to Edit > Preferences > Trust Manager from within the Reader application. Look under the "Automatic Updates" section and you can change the setting as required or chose for the application to ask before updating the root certificates.

RAW support for Olympus OMD EM5

Outfitting for a year long back pack trip. My MacBook Pro is going. Am in processof purchasing an Olympus OMD EM5 micro 4/3 camera for the trip. I use Aperture for photo processing. Any idea when or if Aperture will add support for developing the RAW shots from the EM5?
thnx

The usual interim approach for raw support has been to use Adobe's DNG converter to create DNGs that Aperture could read. This has always worked with the esception of non-Bayer sensors like the Foveon in Sigma cameras. But I can't get Aperure to read DNGs created from my E-M5's ORFs using DNG Converter v6.7 and have no idea where the problem lies.
It's taken Apple months to support Olympus cameras in the past, so I'm not optimistic.
—Andreas

Still no support for Pentax K20D RAW???

I could understand if the camera was just announced, or just came out last week, or even last month - but this camera has been on the market for 3 months now! C'mon Apple!
Any word about when we might see support for RAW files from Pentax/Samsung CMOS cameras in Aperture or even iPhoto? Adobe is already there...

I totally agree. PEF is matched to the new CMOS sensor and you are right, the files are considerably smaller. I really hope Apple will support PEF. I have sent feedback, but I imagine if there isn't much call for it, they won't feel it's urgent.
Pentaxians Unite! Respectfully and Urgently with all Due Politeness Request Support!
Pentax is the camera world today what Apple is in the computer world. Smaller user base, but passionate about our beloved device!

Forum support for Adobe Reader

Hi. I have Adobe Reader X version 10.1.3 installed on a Windows OS. It's a nice program, in most respects, and lately it seems to be improving too. However, it is creating one very annoying problem for me. Every single time I start it up to read a pdf file, it wants to connect to the internet. This should not be happening because I have not configured it for doing so. In the menu item Edit, Prefences, Updater, I have selected the option "Do not download or install updates automatically." Also, since I have my firewall configured not to allow this action, I have to now deliberately stop what I am doing and click on buttons to deny the internet connection. To say that this is annoying, is, well, a gross understatement. How can I prevent it from recurring? Thanks.
Wouldn't it be swell if there were an option, while making a post on this forum, to be notified by email whenever I got a response. Jim dandy swell, I think, and efficient.

Pat, I got an answer this morning. Not sure if you saw it because I don't see it posted here for some reason. This is the answer:
Re: forum support for Adobe Reader
created by Nikhil.Gupta in Adobe Reader - View the full discussion
The request being sent to the akamai server, (even when the Reader updater setting is turned OFF) is for updating the Adobe Approved Trust List (http://www.adobe.com/security/approved-trust-list.html).
The Adobe Approved Trust List is a program that allows millions of users around the world to create digital signatures that are trusted whenever the signed document is opened in Adobe® Acrobat® or Reader® software. Essentially, both Acrobat and Reader have been programmed to reach out to a web page to periodically download a list of trusted "root" digital certificates.
If you want you can specifically turn off the auto update functionality for the same by navigating to Edit > Preferences > Trust Manager from within the Reader application. Look under the "Automatic Updates" section and you can change the setting as required or chose for the application to ask before updating the root certificates.

Lens Support for Emount

When is Adobe going to offer Lightroom and Photoshop lens support for Sony Emount lenses 50 mm F 1.8 and Sony Zeiss 24 mm f 1.8? Why hasn't this already happened?

DworkNarth03 wrote:
In reality, two of the very top selling lenses worldwide.
cd
In reality lens profiles are available for these two lenses and many more using the Adobe Lens Profile Downloader Brett mentioned and provided a link.
Since all of the current Sony NEX cameras use APS-C sensor size, you can use the lens profiles created using any Sony NEX camera model (NEX-5, NEX-6, NEX-7). Just be aware that there are separate JPEG and raw profiles.

Lightroom support for Fuji X-Trans???

From DP review:
Just came back from D-Clic photo show in Montreal and had the chance to talk with Billy from Fuji Guys. He asked me if I was happy with my X-Pro1 and I said yes, very happy BUT would like Adobe and others to better support it (or at all in the case of Aperture...). I expected him to play it safe but he actually acknowledged the problem right away and told me that they recently signed a non-disclosure agreement with both Adobe and Apple and provided them with specs for supporting the X-Trans sensor !
He said he is also pushing strong with Fuji to add support for TIFF in the camera so that could be another good thing for some.
Lets hope this leads to progress...
http://forums.dpreview.com/forums/thread/3286994
Hope this is the real deal…

I had contact with Adobe support on Friday. They are aware of the problem, but could not confirm me that it will be fixed in LR 4.4. We need more pressure!!!

Tethered Support for Nikon D-610

By reading comments herein, one is led to believe that LR 5.3 provides tethered capture support for the Nikon D-610. Well, I have a MacBook Pro and OSX, and beg to differ. I cannot, for the life of me, get LR 5.3 to recognize my D-610.
If the camera is truly suppoted, please -- someone, anyone -- tell me what steps I need to take to get the software to recognize the camera?
If this camera is not supported, when will the D-610 be added? LR 5.3 already supports the 610's predecessor, the D-600; this camera had such a serious dust/sensor problem that Nikon quickly introduced the 610, which is virtually identical but without the sensor problem. Please, give me some good news!!
Any takers??
Thanks, Image man

Omission?
Hardly - just limited resources and an almost new-to-market camera. Adobe can't do a thing until the D610 is added by Nikon to the SDK (which only happened in November), and then Adobe has to work the update into a Lightroom release.
It can take a while...

Aperture support for Nikon 1 AW 1

Is there Aperture # support for Nikon 1 AW 1 .nef file format??

Frank
The AW 1 became available about the first of November.
I'm running Aperture 3.5, OS X Mavericks 10.9, and Digital Camera RAW Compatibility Update 5.01
What is surprising is that I understood that the AW 1 contained the same sensor etc of the V2. It was the waterproof shockproof body that was the big change.
Thanks for the quick response.
Bill

Support for 4.x sensor signatures

Similar Messages

Maybe you are looking for