Support for Adobe Flex

Hi All,
Is Adobe Flex supported in R/3 4.7? If not, what other components or stand alone engines are required to support it?
Regards,
Masoud

Hi,
It is not possible to develop RIA application in 4.7.
For adobe flex you will need to upgrade the system to ECC 6.0 and Netweaver 7.0. And also you will need adobe flex builder.
for more information
/docs/DOC-8535#section14 [original link is broken]

Similar Messages

Java API for Adobe Flex(AIR and Browser)

Hello Community,
Sometime ago i started the project located at: : http://code.google.com/p/gwt4air/ , wich primary goal was to bring another approach on writing AIR application by providing a Java API for the AIR API. On top of that i added support for PDF and Excel generation using Java.
I m glad to announce that the project will now add support for the Flex Framework
I wrote a post about it on the main page.
The Idea behind it is to give Java Developers a more simple way to write Flex Application by leaveraing a swing like API.
I hope this project will be a good alternative to the MXML+ ActionScript approach and looking for people willing to join the project.
Regards,
Alain

Good question, I'd like to know this myself. 4.5 has a huge number of changes since 4.0.

Retina support for Adobe AIR HTML

Hi,
I was suprised to find there's no retina display support for Adobe AIR (3.9).
Macs with retina displays have been around for quite some time now.
This is a crucial feature as I will not be able to use my application on my retina display.
A bug report has been opened here: https://bugbase.adobe.com/index.cfm?event=bug&id=3662094
Thanks.

Hi Jeffrey,
This is indeed an issue with the HTML control, however the StageWebView(true) control does support retina devices. Is it possible for you to use this instead?
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageWebVie w.html#StageWebView()
Thanks,
Chris

Korean Support for Adobe Flash Player?

I have to go to Korean websites a good amount; however, there are some times when Korean is not being displayed well at all. It took me a while to figure out why certain Korean test was displayed well, but others were not.
I have finally found the culprit, and it is that I don't have Korean support in Adobe Flash Player. I tried researching how to enable Korean support, and how to download a package to add Korean support; however, I have not been able to do that.
How can I add Korean support to Adobe Flash Player?
For pictures of the issue plus more information, I have a StackExchange question on SuperUser here: http://superuser.com/questions/810427/korean-support-for-adobe-flash

Just for more information.
I work at a Korean company and have both Korean and non-Korean coworkers.
All the laptops of the Korean workers DONT have this issue. Their laptops display the Korean text in the flash player correctly!
All the laptops of the Non-Korean workers DO have this issue.
This issue is browser-agnostic. It occurs on all browsers!
All Non-Korean workers have Windows 8 or 8.1
All Korean workers have Windows 7 through Windows 8.1
I think this issue is for all users that don't have a Korean laptop. I will try double-checking the one Non-Korean coworker that DID buy a Korean laptop here in Korea. Maybe this is not an issue for said coworker??
You won't have access to my company's site however, I have seen some websites that DO and DONT display Korean text, and they are from the exact same .swf file
(ie. here --> http://img.kbs.co.kr/cms/drama/marryme/images/sub_menu.swf?hn=1&mn=3) and the webpage this .swf file is from is here --> 등장인물 | [화면해설] 결혼해주세요 | KBS 2TV
I cannot verify if this issue is related to the older text facilities that pre-date multi-byte text support; however, I can provide some images of the issue.
If you need more information, then please let me know what you will need.
this bottom image is in the link I provided above! Along with the website it is in

Chinese language support for adobe reader for HP WEBOS?

is there any traditional chinese language support for adobe reader for HP WEBOS?
if yes, where can I download?

Pat, I got an answer this morning. Not sure if you saw it because I don't see it posted here for some reason. This is the answer:
Re: forum support for Adobe Reader
created by Nikhil.Gupta in Adobe Reader - View the full discussion
The request being sent to the akamai server, (even when the Reader updater setting is turned OFF) is for updating the Adobe Approved Trust List (http://www.adobe.com/security/approved-trust-list.html).
The Adobe Approved Trust List is a program that allows millions of users around the world to create digital signatures that are trusted whenever the signed document is opened in Adobe® Acrobat® or Reader® software. Essentially, both Acrobat and Reader have been programmed to reach out to a web page to periodically download a list of trusted "root" digital certificates.
If you want you can specifically turn off the auto update functionality for the same by navigating to Edit > Preferences > Trust Manager from within the Reader application. Look under the "Automatic Updates" section and you can change the setting as required or chose for the application to ask before updating the root certificates.

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

We're working on an update to Ideas to add support for Ink & Slide. Stay tuned for further information as to timing.
Kim
Adobe Ideas Team

Forum support for Adobe Reader

Hi. I have Adobe Reader X version 10.1.3 installed on a Windows OS. It's a nice program, in most respects, and lately it seems to be improving too. However, it is creating one very annoying problem for me. Every single time I start it up to read a pdf file, it wants to connect to the internet. This should not be happening because I have not configured it for doing so. In the menu item Edit, Prefences, Updater, I have selected the option "Do not download or install updates automatically." Also, since I have my firewall configured not to allow this action, I have to now deliberately stop what I am doing and click on buttons to deny the internet connection. To say that this is annoying, is, well, a gross understatement. How can I prevent it from recurring? Thanks.
Wouldn't it be swell if there were an option, while making a post on this forum, to be notified by email whenever I got a response. Jim dandy swell, I think, and efficient.

Pat, I got an answer this morning. Not sure if you saw it because I don't see it posted here for some reason. This is the answer:
Re: forum support for Adobe Reader
created by Nikhil.Gupta in Adobe Reader - View the full discussion
The request being sent to the akamai server, (even when the Reader updater setting is turned OFF) is for updating the Adobe Approved Trust List (http://www.adobe.com/security/approved-trust-list.html).
The Adobe Approved Trust List is a program that allows millions of users around the world to create digital signatures that are trusted whenever the signed document is opened in Adobe® Acrobat® or Reader® software. Essentially, both Acrobat and Reader have been programmed to reach out to a web page to periodically download a list of trusted "root" digital certificates.
If you want you can specifically turn off the auto update functionality for the same by navigating to Edit > Preferences > Trust Manager from within the Reader application. Look under the "Automatic Updates" section and you can change the setting as required or chose for the application to ask before updating the root certificates.

Obfuscator for adobe flex 3

hi all, i had worked for many months in a project of mine with adobe flex, at this point i have developed a interesting and powerful ria with adobe flex 3 and sql server database, now i want to put it on the web but i want to avoid to someone accessing my app tries to decompiling. my app work with modules which are loaded into the client when need it, so my question is theres somes way to hide this modules ? i think a first security barrier could be obfuscate it, but theres others ? i was googling and there are people saying that many obfuscators for adobe flex dont work and produce compiling errors.
thanks in advance.

Hi Marcelo,
FlexBuilder on Linux was an alpha product which was not licensed under Adobe Flex 3 license.
Also FlexBuilder on Linux is now a discontinued product and please find more details in this link
http://labs.adobe.com/technologies/flex/flexbuilder_linux/
However one can continue using Flex SDK on Linux from command line.
Thanks,
Deeptika

Spelling dictionaries support for adobe reader8

What is the importance/utility of spelling dictionaries support for adobe reader8 ?

You can spell check what you type in a form.

Is there a forum or additional documentation for Adobe Flex Connector for MS SQL Server?

Is there a forum or additional documentation for Adobe Flex Connector for MS SQL Server? I am having problems getting it to work. Also it states that it is Flash Builder 4 certified but the code is all in halo (<mx:Application ...). I followed the documentation in the included PDF to no avail. I am looking for additional documentation - e.g.: a) where exactly (which directory on the SQL Server) to store the "fas_mssql_connector.asp" file; b) how to code the URL to the "fas_mssql_connector.asp"; c) wondering if the product is really Flex 4 certified. Thanks for any help (especially pointers to additional documenation).

I do have exactly the same questions. SO far the fas_mssql_connector.asp file is placed at the 'wwwroot' folder of the 'inetpub' folder of the IIS server. As hostname I use '[MyServer]' since it should run on the same machine and username and password are correct.
The fas_MSsql_Clean file is setup in a way that the name of the database is specified and the url to the asp file is set as: http://[MyServer]/fas_mssql_connector.asp
My SQL query looks like this:
private function getDbData():void
    mssqlQuery("Select * from Tomat", "getDataO3");
And the MXML document like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="955" minHeight="600">
    <mx:Script source="Actionscript/MSsql.as"/>
    <mx:Script source="Actionscript/SqlQueries.as"/>
    <mx:DataGrid x="148" y="95" id="dgData">
        <mx:columns>
            <mx:DataGridColumn headerText="Column 1" dataField="col1"/>
            <mx:DataGridColumn headerText="Column 2" dataField="col2"/>
            <mx:DataGridColumn headerText="Column 3" dataField="col3"/>
        </mx:columns>
    </mx:DataGrid>
    <mx:Button x="148" y="264" label="Get data" id="btnGet" click="getDbData()"/>
</mx:Application>
However the application is busy for a long time and I do not receive a single piece of data. Any help with this?
Thanks in advance.

Query For Adobe Flex 4 Plug-in for QTP

Hi ,
I have a query regarding Flash plugin for QTP 11.0 . My application is a web application and it is developed using Flash and java. I wanted to use Adobe Flex 4 plug in but was not able to find it. It is still available for download and will it support QTP 11.0
Thanks ,
Shweta

The Canon EOS 350 (DIgital Rebel XT) was not added to Camera Raw until version 3.1. Photoshop CS only supports Camera Raw 2.x.
You will need to upgrade to CS2 or use the DNG Converter utility to convert the raw files from the 350 to a DNG file that Photoshop CS can work with.

Xcelsius support which Adobe Flex SDK (Software Developer Kit)??

Hi @ all,
can anyone tell me what Xcelsius which Adobe Flex SDK (Software Developer Kit) support?
Xcelsius 5.3.0.0                                                     = Adobe Flex SDK 2.0.1
SAP Crystal Reports Dashboard Design 2008           = Adobe Flex SDK ??
SAP Crystal Reports Dashboard Design 2011 beta     = Adobe Flex SDK ??
For your help I would be very grateful.
Greetings
Armin

Hi Armin
Xcelsius 2008 SDK is compiled using Flex 2.0.1 Hotfix 3.
I am attempting to find the version of Flex that Xcelsius 2011 uses. If I am able to find the answer, I will post it here.
Regards,
Chris

VBScript editor with Intellisense/Code Hinting support for Adobe App

I am looking for some tool to write my InDesign VBScript files in. I would really like to know if there is any which support Intellisense/Code hinting for Adobe programs (InDesign especialy). Do you have anything to recommend?
I am quite good at hacking my computer, so no registry change etc. is a problem for me, I just can not find any. I already tried PrimalScript 2009 but it doesn not work.
What I need is that in following block of code
Set myInDesign = CreateObject("InDesign.Application.CS4")
Set myDialog = myInDesign.Dialogs.Add
I will get list of all methods/properties after I write the dot after "myInDesign" in second line. But it never worked. I even tried to put "InDesign.Application.CS4/C:\ProgramData\Adobe\InDesign\Version 6.0\cs_CZ\Scripting Support\6.0\Resources for Visual Basic.tlb" line into Options>Text editor>Type libraries.
I am using Windows Vista SP1 and I have Adobe Creative Suite CS4 installed (upgrade from CS3 which was upgraded from CS2)
Thanks a lot for any help/suggestion, as I start feeling desperate.

Hi Everyone!
As I have said, I waited for next service release, which is as of now PrimalScript 2009 version 5.0.614 and I did some testing with it.
Results:
WinXP EN Professional
- Just pointing PrimalScript 2009 to typelib, no creative suite installed, working
- Installed Creative Suite CS3 Czech (trial mode) - Working, no need to setup anything
- Installed Creative Suite CS3 + CS4 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
Windows Vista SP1 Ultimate EN (in trial/not activated mode)
- Just pointing PrimalScript 2009 to typelib, no creative suite installed, working
- Installed Creative Suite CS3 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
- Installed Creative Suite CS3 + CS4 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
Windows 7
I am not planning to use Win7 in near future, so I did not not run any test on it.
Windows Vista SP1 Home Premium Slovak (fully activated)
- Installed Creative Suite CS3 + CS4 Czech (full mode) - Not working. This is my main machine. It is Creative Suite CS2 upgraded to CS3 then CS4 (it is running for years without reinstall). I use CS3/CS4 side by side for some older projects. There are still references to CS2 in registry. I tried pointing PrimalScript 2009 to correct typelib, but to no avail. My conclussion is that there is someting messed with its config or registry, but I am pretty sure it would run after complete system reinstall.
Both WinXP EN Pro and Vista SP1 Ultimate EN were clean install into MS Virtual PC 2007, with only Creative Suite and PrimalScript 2009 5.0.614 installed into each machine so I made sure there are no other issues involved.
As I spend 80% of my time with developement of websites and scripting of MS Office/Creative Suite, I have some virtual machines set up for testing purposes. I will use one of them for development in PrimalScript and move it to main (real) Windows Vista Home Premium Slovak installed once I will decide to completely reinstall it. The need for seting up the typelibray link is no deal for me, as it is working as expected then, and I expect a lot ;-)
So problem solved, I found o program I will use. There may be others which do better or are cheaper (but I do not know about any) but $299 is not a big issue when I get what I want.
P.S.: The solution with making VBScript code with VBA declaration (using Dim) is not a solution I like, as I would need to comment it out everytime I run/edit the script and it would be pain in the *** while debugging it as i would need to do lot of comment/uncomment cycles and i can use my ime better then doing the monkey work as some fo the scripts I write are quite huge and I prefer to build them incrementaly and test/debug a lot.
I wish to thank everyone for their help and suggestions,
Matus

IMAC's Top graphics card frustration - Cheap and no support for Adobe Mercury Playpack Engine GPU Acceleration?

If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
Please, if you have a solution for me, let me know. Otherwise I find it pretty frustrating that I purchased a top-end iMAC, fully maxed-out in every way possible, and that the iMac doesn't support Adobe Premiere's Mercury Playback Engine GPU acceleration. Also, an old USB 2.0 Hub and thus the built-in SD card reader is slow. If you have SD cards with 95MB/s Transfer, Read and Write speeds, the iMAC will only transfer at around 30MB/s if you're lucky. Technically 480Mbs which is around 50MB/s but I haven't seen those speeds.
I figured this could at least be circumvented with a Thunderbolt SD card reader or a Thunderbolt to USB 3.0 adapter but of course no such thing exists.
Well, nothing with a reasonable price tag. This all might seem trivial to some but when you're uploading 24 hours of HD video footage from a 128GB SDXC card, the speed makes a big difference.
And come on, no BluRay support? Ridiculous. I get the politics of why but still, just ridiculous. It would be nice to be able to burn a BluRay to watch in my home theater system. There are other methods but BluRay is convenient and great for backing up large Video Files. Unfortunately BluRay looks like it's not going to make it. Maybe cable distribution companies will increase their Internet upload speeds one day and I can just store everything in the cloud and watch full length movies(that I've created) on Vimeo.
Anyways, I went and took a look at the hardware Apple stuffed inside my fancy (3.4 Ghz i7, 16GB 1333 DDR3, 2GB AMD 6970M, 256 GB SSD Internal and 2TB 7200 Internal) machine and it appears to be pretty middle of the range stuff. It's an iMAC, not a Mac Pro so why am I griping? Because my 2009 PC(which I tricked out over the last two years) is faster and does support the Mercury Playback Engine. I spent $2100 total on this PC which includes all my upgrades. I spent around $3300 on the iMAC. I feel ripped off.
Yes, I do love my iMAC on multiple levels but had I known my dated 2009 PC would render video projects faster, I would have gone with a MAC Pro or just a new PC. It seems that Mac is moving completely away from making high-end computers for niche markets(video editing) and focusing on their tiny laptops, IPADS and IPhones for the masses. Obviously smart from a capitalistic perspective(at present at least) but very frustrating for some.
I was actually told to purchase a MAC for video editing. I've been a PC guy for 15 years. I went with the iMAC because I had read many good things about it(probably just Apple propaganda) and also the MAC PRO was to be discontinued. Also the MAC Pro would have been triple the cost for what didn't seem like a whole lot more.
It's one's thing to prepackage a computer with inferior hardware(the iMAC I have is fast for most things and more than enough for 99% of the population) but to not allow us to pop open the computer and make a quit upgrade to the machine is what really makes me feel like I'm using a computer built for Grannies. I mean there is a reason my mother loves iMacs and Iphones. Amazing that I was able to upgrade my memory from 4 to 16GB but I've heard Apple has even done away with that. I get why they do it. Apple Warranty, Apple Care issues, Profit and World Domination: Apple wants a monopoly on everything.
Was great to see Adobe bounce back after the whole Flash/HTML5 thing and knock Final Cut Pro off the face of the Earth for good. People are still buying it b/c of the brand name but Final Cut is done. David Fincher used Adobe's Workflow for everything when he made The Girl with The Dragon Tattoo. Hollywood is making the shift and the world will follow. The Adobe Workflow has finally come together and there is just no way Apple can compete with Adobe Creative Cloud and an Engine that can just swap from Premiere to After Effects to Prelude to SpeedGrade to Photoshop to Story with speed for $29 bucks a month(or $49 for some). Apple better start supporting Adobe's Mercury Engine or they may have a problem. And if you're using Final Cut X, you're severely handicapping yourself. Problem is that people don't want to take the time to learn Adobe's products(steep learning curve for sure) which is where Apple's Granny software, and perhaps computers, comes in to play. Arnold Schwarzenegger once said "Milk is for babies, Real Men Drink Beer". I'm beginning to think that "Mac's are for Grannies, Real Men Use Adobe and PCs".
The major problem with Apple is you're forced to use Apple. Not sure but history has proven that people don't like to be forced into anything. Autocracies don't work. These systems eventually topple, even in the corporate world.
Amazon.com, now that's the company to emulate. What an amazing machine!
I've read that Apple may even discontinue the iMAC after 2013. Who knows?
If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
1) Graphcis Card - AMD Radeon HD 6970M 2048 MB (6990 would have been better or something from NVIDIA.
2) USB 2.0 Hub with only 480 Mb/sec
3) Seagate Baracude SATA I 7200 RPM drive with 3GB/s transfer rate and only a 32 GB Cach. It's ok. I would have expected at least a Western Digital Caviar Black 2 TB SATA III 7200 RPM 64 MB or the Velociraptor at 10,000RPM.
4)APPLE SSD TS256C Flash Drive. As you can see, it doesn't stack up so well against other SSD Drive.
Just average. http://www.harddrivebenchmark.net/hdd_lookup.phphdd=APPLE+SSD+TS256C

Whining and ranting about how iMacs can't do this or iMacs/orMacs can't do that is not going to get you a lot of help here.
Your "I love my MAC" is typical of the ever ubiquitous PC whiner.
If your video work needs were that computer intensive and critical , you should've done some online research and you should have budgeted for a Mac Pro.
Mac Pros are completely expandable and upgradeable unlike the iMac.
Mac Pros have much more faster and more CPU cores than the iMac line.
iMac line is limited to CPUs with 8 cores. The Mac Pros, I believe, are up to 16 core CPUs, now.
The Mac Pros can have their GPU upgraded and you even add/expand to use specialty audio/video cards.
Mac Pros are the defacto standard for real video work.
iMacs, even the high end model, is not really designed to do really heavy and intensive video work.
iMacs do do video creation and editing. Just not on the level that is needed from a more "Pro" computer.
It seems to me you are asking your iMac to do more than it was originally designed for, in terms of professional video editing.
You get a lot more out of a Mac Pro than an iMac for any real serious video, CGI or animation work.
You just didn't want to spend that much cash on one.
iMacs are not user upgradeable or friendly to user upgrades at all!!!
If you purchased a Mac Pro, you could've had that better, faster HD, better faster SSDs.
That said, I can offer no real help to but because of the nature of your post and the fact you just simply annoyed me, I feel some advice and explanations are in order
First off, you picked Adobe video editing software suite as your video creation software on the Mac. It's no secret to long-time video content creators on the Mac that Adobe products, especially those for video creation and editing are very user unfriendly on the Mac. Even though Macs are supported from Adobe, Adobe for a long time has treated the Mac and Mac users as second class citizens.
Before purchasing and installing Adobe Premiere, did you even check Adobe's site for the preferred system hardware and software requirements? Hmmm?
This is why you should KNOW what software you are going to be running on a computer first then research what computer make and model will run said software.
That's why Apple has its own apps like Aoerture, Logic and Final Cut.
Despite your ignorance in this matter, Final Cut Pro X is alive and doing well, thank you, and using this software on your iMac would kick Adobe Premier in the you know whats.
Final Cut Pro X is a complete video solution for and completely designed around the Mac.
Why are you using USB 2.0 connections for video work when you have a perfectly good FireWire 800 connection.
In case you are not aware, FireWire 800 is called so because it has a max throughput of 800 Mbps.
Your 2011 iMac can take up to 32 GBs of RAM. Not just 16 GBs.
This changed when the 2010 model iMacs came out.
Blu-ray? I believe you can buy external Blu-ray writers that work with Mac using said FW800 connection.
So you cite one movie and one videographer using Adobe Premier for your premise that Final Cut is dead in Hollywood?
Your argument that Apple locks you into everything in their world can be countered by saying Windows and Windows PCs lock you into the Windows world. What's your point?
Apple is not discontinuing their computers platforms any time soon.
All you are regurgitating is rumor. Probably from all of the PC crowd.
iMacs and professional desktop Macs are not going anywhere.
Currently, Apple is the only desktop/laptop computer maker that is still making a profit on their Macs and increasing their market share percentages for the last 5 years during which the PC market has continually slumped/dropped in its market share.

Multi language support for Adobe interactive form

Hi ,
I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language.
I created XML schema based interface and if a execute interactive form in Webdynpro, i am unable to pass launguage(LANGU) parameter. because InteractiveForm element property does not have language key parameter.
Apart from creating different language dependent forms, is there any alternate way we can pass the LANGU key parameter to Interactive Adobe form???

Hi Thomas
Let me share my few more investigation on the same, I chaged form each element property to login language.
and translated form to other languages. If directly execute form in sfp with loging in different language i am getting right result. it means even no need to pass the LANGU parameter.
But same thing if i execute from Webdynpro i am getting default 'EN' language form, even though i login in 'DE' language.

Support for Adobe Flex

Similar Messages

Maybe you are looking for