Support for Compaq tru64 unix ver. 5.x

I would like to know when the Oracle 9i AS
Portal product is ready for Compaq Tru64
unix ver. 5.x?
And can I use the Oracle 9i AS Portal alone
with Oracle 8i db also running Compaq Tru64
unix ver. 5.x?
Thanks in advance

Hej Michael
Do You know when Oracle 9iAS Portal will be certified to Compaq Tru64 Unix ver. 5.x?
Best regards
Anders Trier Rasmussen
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Stephenson ([email protected]):
Oracle 9iAS Portal (3.0.6.6.5) is currently certified against Compaq Tru64 Unix 4.0d-g with the following patch kits for the OS: if you have 4.0d you need patchkit3, if you have 4.0f you need patchkit1. You will also need JavaSoft JDK 1.2.2_05A.
You can run both the Portal and the database on the same Tru64 system, just be sure to put them in separate ORACLE_HOMEs. The database releases that has been certified with the Portal on Tru64 are 8.1.6 and 8.1.7.<HR></BLOCKQUOTE>
null

Similar Messages

Is there Tux 7.1 for Compaq Tru64 Unix 5.1 version

Help!
please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
send it to my email: mailto:[email protected]
Thanks.

I encountered matching problem while trying to use Tuxedo 6.5 from the
original installation package. The best match for Compaq Tru64 UNIX 5.1
from the available platforms on the cd was "Digital Unix 4.0d on DEC
Alpha".
However the simpapp failed to shut down, just like Yshyang has written
below. After contacting BEA support, the support personnel asked if a
patch has been applied (check if a $TUXDIR/udataobj/patchlev file
exists). It didn't.
The Tuxedo 6.x platform data sheet at
http://www.bea.com/products/tuxedo/platforms_6.shtml
shows that Tru64 UNIX 5.1 is supported, if Tru64 UNIX 4.0b binaries with
patch level 160+ are used.
We got a separate patch for the 4.0b binaries, but working Tuxedo 6.5
installation binaries for Tru64 UNIX 5.0 are available for download at
BEA web site.
Juha Laitinen
Yshyang wrote:
I install Tux 7.1 in Tru65 Unix 5.1 and TruCluster Server 5.1
when i configure simpapp.
tmboot is ok,but tmshutdown can't work,the error is :
CMDTUX_CAT:766:ERROR:must run on master node
(In act I run in master node really,I have checked by uname -n).
the other bizarrerie:
tmadmin
display :
TMADMIN_CAT 202:ERROR:Can't find DBBL in master node or backup node.
(In act my simpapp ubbconfig is:MODEL=SHM)
maybe there is bug I guest.
If it need some patch in the env.
"Marcin Kasperski" <[email protected]> wrote in message
news:[email protected]..
yshyang wrote:
Help!
please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
The version for 'Digital Unix 4.0 sth' seems to be working on 5.1.

Download for Compaq Tru64 unix

Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3 files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

Thanks. I got this impression because usually the SP releases come as zip
files while the WLS installables for unix systems come as bin files. I could
install using the zip file successfully.
Madhavi
"Wayne W. Scott" <[email protected]> wrote in message
news:[email protected]..
>
>
>
What gives you the impression that it is just the SP3 files in there?
The SP3 file has a different name. For example, on Windows it is
wls61sp3_upgrade_win.exe. I hope you are not unzipping it.
Just try to install it. If you're stuck, open a case and I'll look forit!
>
>
Wayne Scott
Madhavi wrote:
Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

9iAS on Compaq Tru64 Unix

Hi all,
I plan to install 9i Application Server Enterprise Edition on Compaq Tru64 Unix
running v5.0a.
This will mean that the Unix Sever will
act as a Database Server,Web server,
Forms and Reports Server.
The Developer Server will be on Windows NT
which will be used to compile forms an reports and transferred to Unix.
Will this work?
Is this all possible?????
Ta
Ashok Sharma
PO Ports
Sydney, Australia

Dont know 100% for sure.
But i think, you have to recompile your
Forms & Reports Application on your UNIX server.
Its not portable through platforms as Java.
But correct me if i'm wrong.
Also just one remark to avoid confusion:
There is no Database Server included in
9i Application Server EE
- Stefan

Is Generic Connectivity included in 8.1.7 on Compaq Tru64 Unix?

Is Generic Connectivity included in 8.1.7 on Compaq Tru64 Unix? How could I find out via SQL*Plus (if at all)?
TIA,
Rob

Robin,
Generic Connectivity is not available on Tru64. It is available on Solaris, NT as of 8.1.6 and on HP and AIX as of 8.1.7.

OWB 10g Release 2 for HP Tru64 Unix

Where I can get the OWB 10g Release 2 for HP Tru64 Unix ? On OTN download page I found only OWB Release 1 for HP Tru64 Unix.

next year it is next week actually ;-)
metalink -> certify -> by platform -> HPUX Itanium -> DB Server -> EE -> 10gR2 -> Additional Info
Planned for January

Sdo_cs.transform on Compaq tru64 UNIX

We have managed to get sdo_cs.transform function working on NT after applying the latest patches. We now need to have it work on Compaq Tru64 Ver 4.0F where we have just installed Oracle 8.1.6.3.0 with all the latest patches.
We get the error:
"ORA-03113: end-of-file on communication channel"
whenever we try the sdo_cs.transform function.
The following code works on our NT installation but fails on the UNIX installation:
SQL> SELECT * FROM AMG56_AGD66;
PLACE_NAME
POSITION(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
AMG56_AGD66
SDO_GEOMETRY(2001, 81938, SDO_POINT_TYPE(498910, 6966131, NULL), NULL, NULL)
SQL> SELECT c.place_name "Name",
2 c.position.sdo_srid,
3 c.position.sdo_point.x "Easting 1",
4 c.position.sdo_point.y "Northing 1",
5 c.position,
6 sdo_cs.transform(c.position,m.diminfo,82413)
7 FROM AMG56_AGD66 c, user_sdo_geom_metadata m
8 WHERE m.table_name = 'AMG56_AGD66'
9 AND m.column_name = 'POSITION';
SELECT c.place_name "Name",
ERROR at line 1:
ORA-03113: end-of-file on communication channel
SQL> SELECT * FROM AMG56_AGD66;
SELECT * FROM AMG56_AGD66
ERROR at line 1:
ORA-03114: not connected to ORACLE
SQL>
Any ideas???
Regards
Peter Cohen
null

Hi Peter,
I believe that functionality was broken in the field test version of coordinate systems that shipped in 8.1.6 only for transforming data stored in the SDO_POINT type. I'm not sure, but I doubt this will be patched on tru64 unix.
If you need to get this working you might want to try storing your point data using the elem_info_array and the ordinate array rather than the optimized point type.
This problem is fixed in 8.1.7.
Hope this helps,
dan

OAS 4.0.8.1 on Compaq Tru64 UNIX 4.0F (Digital Unix 4.0F) : Help !!!

My installation of OAS 4.0.8.1 on Digital Unix
4.0F is failing when it comes to try to
relink something called ntcontab.o
, an apparently missing header file :
cc: Severe: /usr/include/sys/types.h, line 77:
Cannot find file <standards.h> specified in #include directive.
(I did find the header file on the system but in a different place.
I tried a link to make it
appear where it should but that didn't work for
some reason)
My release notes specify 4.0D is required,
maybe thats the problem, though I wouldn't
expect a whole header file to be moved between
minor releases.
Any help very gratefully recieved. I am really
stuck.
Thanks
Alan McCulloch
email : [email protected]
BTW - I'm new to Digital Unix, previously
worked on Solaris. My subjective impression is Digital
Unix is alot less well supported and prevalent
than Solaris, and my feeling is we would
be more secure on Solaris.
Is this at all a valid point of view ? I'd
be very happy to be wrong about this !
null

Hi Peter,
I believe that functionality was broken in the field test version of coordinate systems that shipped in 8.1.6 only for transforming data stored in the SDO_POINT type. I'm not sure, but I doubt this will be patched on tru64 unix.
If you need to get this working you might want to try storing your point data using the elem_info_array and the ordinate array rather than the optimized point type.
This problem is fixed in 8.1.7.
Hope this helps,
dan

XML parser for compaq tru64

what version of 9i XSD i have to download for a compaq tru64 machine???
thank u

It is available in Oracle 8.1.7. It will not be available on OTN.

When can we download the Oracle 10g for HP Tru64 Unix?

Hi,
Could you tell me the time to release the HP Tru64 Unix version?
Thanks

Check this: http://otn.oracle.com/software/products/database/oracle10g/index.html
Joel Pérez

9i runInstaller Compaq Tru64 UNIX V5.1 fails...

I'm desperate to install the New Oracle 9i (we want to use this database as the Repository database for iFS.)
My environment:
$ env
PATH=/usr/bin:.:/usr/local/bin:/usr/local/sbin:/usr/sbin:/oracle/product/9.0.1/bin:/usr/ccs/bin:/usr/openwin
/bin
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/product/9.0.1
ORACLE_SID=IFSD
CLASSPATH=
LD_LIBRARY_PATH=/oracle/product/9.0.1/lib:/usr/lib
LOGNAME=oracle
USER=oracle
SHELL=/bin/ksh
DISPLAY=192.168.103.248:0.0
TERM=xterm
My oraparam.ini
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../../stage/products.jar
LICENSE_LOCATION=
JRE_LOCATION=../../stage/Components/oracle.swd.jre/1.1.8.7.0/1/DataFiles/Expanded/
OUI_LOCATION=../../stage/Components/oracle.swd.oui/2.0.1.4.0/1/DataFiles/Expanded
JRE_MEMORY_OPTIONS="-ms36m -mx500m"
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=OUIHome
NO_BROWSE=/net
HLP_LOCATION=
EWT_LOCATION=
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
OUI_VERSION=2.0.1.4.0
My feedback:
/home/oracle> /home/oracle/Disk1/install/decunix/runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall0/jre/bin/jre. Please wait...
/tmp/OraInstall0/jre/bin/jre[83]: /tmp/OraInstall0/jre/bin/../bin/alpha/native_threads/jre: not found
I spend two whole workdays on this issue, searched all metalink; all no good...
The OUI 8i is running perfectly /oracle/product/oui/install/runInstaller works great.
So it must be possible to get the 9i OUI running.

Dont know 100% for sure.
But i think, you have to recompile your
Forms & Reports Application on your UNIX server.
Its not portable through platforms as Java.
But correct me if i'm wrong.
Also just one remark to avoid confusion:
There is no Database Server included in
9i Application Server EE
- Stefan

Anyone know when R2 for HP-TRU64 UNIX is coming out?

Any news about the other plataforms ? ( TRU64, AIX, WIN )... Please Oracle, tell us something.

Hi,
I heard from an Oracle Partner that OCS R2 shall come out at the ending of June. I admit that it is the third date I was told.
Regards
Christian

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Downloading Oracle8.1.6 for Tru64 UNIX

Where can I download Oracle 8.1.6 for Alpha Tru64 UNIX ? It is not available on the archives of the download page of OTN.

make sure the required characeter set (called subset in TRU64 UNIX) is loaded in OS ...
you can check with command 'setld -l <>'
i dont have a UNIX box with me now ... so i can't tell you exactly what it is ..
take help of any OS (TRU64 UNIX) expert !
good luck

Support for Compaq tru64 unix ver. 5.x

Similar Messages

Maybe you are looking for