Support for CPU extension SSE2 problem, please help
hey guys,
I recently got a PowerBook G4, and I'm trying to install the trial version of PPRO CS3 to give it a test run. And it gives me a message saying "Support for CPU extension SSE2" I read up on this and found out you need an INTEL MAC, which is ridiculous! for those of us with a G4, G5 system.
Does anyone know of any way to bypass this system requirement and still install/run PPROCS3 on a non-intel mac.
Thanks!
Wait... water car idea
Connect to a really LONG extension cord, or use a really BIG battery, to power electrodes to separate water into hydrogen and oxygen
Burn the hydrogen with the oxygen in the engine... but I'm not sure about the net gain of hydrogen burning versus the electricity needed to power the electrodes
Similar Messages
-
Achitecture Not Supported and CPU Extension SSE2 issue. Are there any solutions??
I'm late to the game.
I purchased the CS3 Adobe Master Collection, I get and error that Adobe Premier and Soundbooth wont work with my "architecture".
I thought I had to upgrade to OS10.5 thinking that was the issue.
But now I find that it's not software at all...but Hardware.
The install screen states "Support for CPU extension SSE2" is not met.
And I searched the web for help, and ALL signs point "not being compatible with G5 PPC.
Is this still true? Is there really *nothing* I can do but BUY a new Mac with Intel to run them?
Is Adobe REALLY turning their backs on people without new Intel Macs?
PLEASE tell me there are patches and some work-arounds by now!If your CPU does not support the command set needed to run the program... it will not run... no patches, since that hardware support is a key part of the software
You see it as Adobe turning away... Adobe (I don't work for them) sees it as a minimum hardware requirement -
Adobe Premier Pro asking for CPU extension SSE2???
I installed Adobe Master collection when first released with the exception of Premier Pro.
Now decided to install it. Installation does not start as I get error message that machine does not meet requirements but needs "CPU extension SSE2"
Any ideas what this means??
ThanksFirst help us understand your setup:
Mac Pro or G5?
http://discussions.apple.com/category.jspa?categoryID=108
maybe its the 1MB RAM you have listed?
CS3 is a univeral binary now.
Have you looked on Adobe forum? Google?
Adobe - Adobe Premiere Pro CS3
Topic Title: Support for CPU extension SSE2: Topic Summary: Error during installation on PowerPC Mac:
http://kb.adobe.com/selfservice/viewContent.do?externalId=332238
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=64 4&threadid=1276287&enterthread=y
That is an error most often seen under Windows. A G5 can't run Windows (or use BootCamp).
http://en.wikipedia.org/wiki/SSE2 -
Message: Support for CPU extention SSE2
I'm trying to install PPCS3 and I get the message that I need to update "Support for CPU extention SSE2" before I can install. Does anyone have any idea what this is all about? I sure don't. Thanks for any help or info.
More information.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 300 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you -
this is,we've encountered the following issues.
installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
please,help me!Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?
-
Public Synonyms for Nested Tables - Insertion Problem - Please Help!!!!!
Hi,
we are facing a problem during implementation. Our DB set up
is , we will be having two schema named OWNR and COPY.
In the schema, OWNR we have to create all the tables,
types,procedures, packages and obj.....This schema will have
both DDL and DML privileges.
In the schema, COPY we are not supposed to create any tables,
objects. We have to create public synonyms for all the tables,
types, procedures... in OWNR and grant ALL privilege to the
schema COPY.The schema, COPY will have only DML privileges.
The problem is we have some nested tables in our application.
When I try to insert into the synonym which is created for the
nested table, it is not allowing me to insert..The whole
implementation is stucked..Please help.The scripts are given
below.......
We have a type name SITA_ADDRESS_TY which is used by the nested
table SITA_ADDRESSES_NT.Script used for creating the Type,Nested
table,Table, Public Synonym and granting all privilege to these
types and tables are
CREATE OR REPLACE TYPE SITA_ADDRESS_TY AS OBJECT (
SITA_ADDRESS VARCHAR2(10),
REMARKS VARCHAR2(100)) ;
PROMPT SITA_ADDRESSS_NT...
CREATE OR REPLACE TYPE SITA_ADDRESSES_NT AS TABLE OF
SITA_ADDRESS_TY ;
Using this nested table we have created the table,
UMS_SITA_ADDRESS
CREATE TABLE UMS_SITA_ADDRESS (
COMPANY_CODE VARCHAR2 (6) NOT NULL,
AIRLINE_CODE VARCHAR2 (6) NOT NULL,
DESTINATION VARCHAR2 (6) NOT NULL,
SITA_ADDRESS SITA_ADDRESSES_NT)
TABLESPACE EKUMDAT
PCTFREE 5
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
NEXT 64K
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 505
FREELISTS 1 FREELIST GROUPS 1 )
NOCACHE
NESTED TABLE SITA_ADDRESS STORE AS UMSNT_SITA_ADDRESS ;
PROMPT SYNONYM SITA_ADDRESS_TY...
CREATE PUBLIC SYNONYM SITA_ADDRESS_TY FOR SITA_ADDRESS_TY
PROMPT SYNONYM SITA_ADDRESSES_NT...
CREATE PUBLIC SYNONYM SITA_ADDRESSES_NT FOR SITA_ADDRESSES_NT
PROMPT UMS_SITA_ADDRESS...
CREATE PUBLIC SYNONYM UMS_SITA_ADDRESS FOR UMS_SITA_ADDRESS
Granting Privileges
PROMPT SITA_ADDRESS_TY...
GRANT EXECUTE ON SITA_ADDRESS_TY TO COPY
PROMPT SITA_ADDRESSS_NT...
GRANT EXECUTE ON SITA_ADDRESSES_NT TO COPY
PROMPT UMS_SITA_ADDRESS...
GRANT ALL ON UMS_SITA_ADDRESS TO COPY
When I connect to copy and desc UMS_SITA_ADDRESS, the structure
is
SQL> desc ums_sita_address
Name Null? Type
COMPANY_CODE NOT NULL VARCHAR2(6)
AIRLINE_CODE NOT NULL VARCHAR2(6)
DESTINATION NOT NULL VARCHAR2(6)
SITA_ADDRESS
OWNR.SITA_ADDRESSES_NT
Why is it so??. Even though I have a synonym for
SITA_ADDRESSES_NT, it is not referencing the synonym but instead
refer the OWNR.SITA_ADDRESSES_NT
Because of this when I try to insert into ums_sita_address(in
schema COPY), it is giving the following error,
SQL> insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_NT());
insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_NT())
ERROR at line 1:
ORA-00932: inconsistent datatypes
But when the same connect to OWNR and try to insert with the
same stmt, it is inserting...
Our middle tier can connect only to COPY schema alone..Is there
anything to be done in the DBA side to achieve this??.
Please help from your valuabe experience...Or can you ask your
collegues if they have got a soln to this probs..We are stucked
with this...
Thanks
PriyaHi
I am not sure but maybe you need to use this command:
SQL> insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_TY());
SITA_ADDRESSES_TY() instead SITA_ADDRESSES_NT
Regards -
I recently purchased Adobe Premiere Pro CS3 for my PowerBook, and it will not install because I need "support for CPU extension SSE2". Is there an upgrade I can install, or do I need a newer CPU to run this software? I am not very familiar with it, and nothing came up when I ran a search on the Apple web site.
-RobAdobe says Premiere Pro CS3 will run on Intel CPU:
http://www.adobe.com/products/premiere/systemreqs/
"..Multicore Intel® processor (Adobe® OnLocation™ CS3 is a Windows application that may be used on Macintosh using Boot Camp and Windows, sold separately).."
PowerBook 17" has Power PC CPU, not an Intel one. -
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
-
Hi. ITunes 11 dont install my pc.. Problem: "There is a problem with this windows installer package. A problem required for this install to complete could not be run. Contact your support personnel or package vendor." Please help me.
Repair your Apple software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All programs, go to control panel/
XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
Vista or Win7 - Programs n features/highlight ASU and click REPAIR -
when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?
Contact the original owner, and ask them to remove the device from their icloud.
http://support.apple.com/kb/PH13695
HTH -
Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C -
Problem Please help me.....Let me know the area to look for it
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es
Maybe you are looking for
-
Problem with document splitting and zero balance clearing account
Hi SAP Gurus, We've already configured the document splitting functionality in our project, however we still encounter some issues with the outcome of posting documents. For some scenarios, the document split functionality seem to work. Below is such
-
Maintaining Global Variables in a Web Service
HI I want to write some webservices which manages global variables. For example i need to maintain a list of users who use this service (When the users first request comes his name is added to a data structure such as arraylist)s o that when his next
-
WIll Update to AppleTV allow storage without link to iTunes on Computer?
I am hoping that the software update will allow me to simply store media on my AppleTV - sortof like a disk drive - instead of having to maintain the files in two places - e.g. one copy in my iTunes lib on my Mac and another on the AppleTV. Ideally,
-
After a power hit corrupted my hard drive, resetting of the eprom, a full disk reformat, followed by fresh install of Lion 10.7, reload of files from a TimeMachine backup, install of all upgrades available, Safari now failes to load. Any suggestions
-
I have a Firestore FS-4 Pro (external hard drive) that I use when recording football for the local community college. When recording, the footage is recorded as Quick Time files on the FS-4. When I mount the drive, open the folder and drag the files