Support for database objects shall be installed

Hello,
my problem is the following:
Support for Repository (Core) Objects is installed,
but I want to install the support database objects, too.
Can you help me with that?
Thanks

Henrik,
I assume you mean the Designer model, as this provides a structured database model, along with many other elements. You are given the option to install the Designer model along with the Core model when you initially installed the repository using the Repository Administration Utility.
regards,
David

Similar Messages

  • The requested action is not supported for this object. [message 131-171]

    Hi,
    One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
    "The requested action is not supported for this object. [message 131-171]"
    Any ideas what could be the problem?
    Regards,
    Mohan

    Hi Johnson,
    I have not tried your suggestion till now as I am waiting for the database copy from my client.
    Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
    The report prints fine if it has single invoice even if it is a check payment.
    Will your suggestions address this as well?
    Regards,
    Mohan

  • CF10 Failover support for database

    Hi all,
    I've been using ColdFusion 10 Standard for some time and recently noticed that there is Failover support for databases on CF10 Standard
    CF10 Enterprise edition can enable Cluster for load balancing and fail over for application and sessions
    What is this failover support for database on CF10 Standard edition all about?
    Can't seem to find any documents or discussion about this

    Try this :
    jdbc:macromedia:oracle:@(description=(address_list= (address=(host=xxxxx.xxx.local) (protocol=tcp)(port=1568))(address=(host=xxx.xxx.local)(protocol=tcp) (port=1569)) (load_balance=yes)(failover=yes))(connect_data=(service_name=xxxxx)))
    For further details check here : https://blogs.oracle.com/theshortenspot/entry/advanced_oracle_jdbc_connectio
    HTH
    Thanks
    VJ

  • Portals supported for Business Objects

    Post Author: izhar
    CA Forum: General Feedback
    Hi all members, I want to know, just like Sharepoint Portal which are other portals to connect with Business Objects. Which are other portals to be supported with Business Objects? Kindly any member guide here.
    Any link having lists of portals supported for Business Objects is welcome.
    Regards, Izhar

    Post Author: jsanzone
    CA Forum: General Feedback
    Izhar,
    I would suggest going to the Business Objects Support site and doing a search on "portal integration kit" (and before clicking on search, choose your product via the "Products:" indicator, as well as choosing the Document Types of "Kbase Articles", "Product Documentation", and "Technical Papers").

  • How can I install asian script for language support for bangla in safari and install a font??

    how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.

    You just need to install a font, like one of these:
    https://sourceforge.net/projects/onkur/
    http://www.ekushey.org/?page/osx
    For non-Unicode sites, see
    http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html

  • CS4 drops support for databases?

    I just got off a lengthy call with Dreamweaver tech support,
    and they confirmed that there is no longer any support for database
    connectivity using ASP.Net VB in the new CS4 version. The only
    connectivity that is supported is through a Spry Dataset. The
    technician said that this appears to be a security related issue
    and that Adobe has no intentions of changing this.
    Why would Adobe do this?
    I have used Dreamweaver for many years, and this was one of
    the strongest parts of the program, and the decision ends our
    company’s use of any newer version of the product.

    MCUlloa wrote:
    > I just got off a lengthy call with Dreamweaver tech
    support, and they confirmed
    > that there is no longer any support for database
    connectivity using ASP.Net VB
    > in the new CS4 version. The only connectivity that is
    supported is through a
    > Spry Dataset. The technician said that this appears to
    be a security related
    > issue and that Adobe has no intentions of changing this.
    >
    > Why would Adobe do this?
    >
    > I have used Dreamweaver for many years, and this was one
    of the strongest
    > parts of the program, and the decision ends our
    company?s use of any newer
    > version of the product.
    The dropping of support for ASP.NET was announced in August
    2007, but
    support for ASP, PHP and CF hasn't been dropped. The reason
    for .NET to
    be dropped isn't just security, its down to Adobe never being
    able to
    keep up with all the updates from Microsoft for .NET. They
    just can't
    compete with Microsoft's own products.
    I am still on CS3, and don't have any plans to get CS4, as
    the features
    don't make a big enough difference for me, yet. So if you
    need .NET
    support, stick with CS3, but you will only be using getting
    .NET v1.1 so
    you will be far behind everyone else.
    Dooza
    Posting Guidelines
    http://www.adobe.com/support/forums/guidelines.html
    How To Ask Smart Questions
    http://www.catb.org/esr/faqs/smart-questions.html

  • 11g TP3 / ADF BC / Support for database type in column

    Is it necessary to instantiate an object of corresponding type in the row implementation class to manage the corresponding type attributes like in 10g ?
    Example from 10g :
    protected void create(AttributeList attributeList)
    super.create(attributeList);
    ApplicationModule root = getDBTransaction().getRootApplicationModule();
    DBSequence seqid = new DBSequence("customers_seq",root);
    setCustomerId(seqid.getSequenceNumber());
    try
    CustAddressTyp custAddr = new CustAddressTyp();
    this.setCustAddress(custAddr);
    catch (Exception e)
    e.printStackTrace();
    }

    We currently don't offer support for Oracle ADF BC in Eclipse and while we might consider this for a future release this is not planned right now.

  • Intel Chipset Support for Windows 7 fails to install

    When I tried to manually install Intel Chipset Support for Windows 7, Vista and XP (oss907ww, Version: 9.1.1.1016, Release Date: 2009/10/02, http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73684) on my W700 with Windows 7 x64, I got the following error message:
    "This computer does not meet the minimum requirements for installing the software. Setup will now exit."
    The newly released System Update 4.0 also fails to install this version of Intel Chipset Support. However, the previous version, Intel Chipset Support for Windows Vista, XP and 2000 (oss803ww, Version: 8.7.0.1007, Release Date: 2008/08/20, http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70315) installs and works fine on my current system. Has anyone else had this problem?

    Hi,
    I have a problem installing the above mentioned chipset driver for win7. TVSU can't install it, and when I do it manually, it gives me a message saying (translated - original message was annoyingly in chinese) "This system does not meet the lowest requirements of the software. The installation will end now."
    I tried downloading it from lenovo's website, but it didn't work either, giving me the same message. The version of this driver is 9.1.1.1016 (according to TVSU).
    Anyone have any ideas on what on earth is wrong?
    Thank you all!
    Cassio
    Moderator note; subject edited to match thread
    T400s - 2815RW1 + Win7 Ultimate
    Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

  • Bulk API V2.0 Data extract support for additional objects (Campaign,Email,Form,FormData,LandingPage)?

    allison.moore
    Any plans for adding following objects under Bulk API V2.0 for data extraction from Eloqua. Extracting the data using the REST API for these objects makes it complicated.

    Thanks for quick response. Extracting these objects using REST API in depth=Complete poses lots of complication from the code perspective since these object(s) contains multiple nested or embedded objects within it. is there any guideline on how to extract these objects using REST so that we can get all the data which is required for analysis/reporting.

  • Is there any best practice or standard for database object naming ?

    Hi
    Thank you for reading my post
    is there any standard or best practice for databse objects naming ?
    for example how should we name columns of a table ? should it be like TOTAL_VOTE or TOTALVOTE and many other items.
    Thanks

    what does oracle suggest as a naming schema for tables , fields , views. indexes , tablespaces , ... If you look at the data dictionary you will see that not even Oracle keeps rigidly to any specific standard, although there are tendencies :)
    "The nice thing about standards is that there are so many of them to choose from."      
    -- Andrew Tannenbaum
    Cheers, APC

  • SE14 - mass check for Database objects

    Dear Gurus
    We have a lot of tables, that have error/problems in check DB14->Check->Database object
    How can I find all problematic tables in single report?
    Regards
    Vladimir

    you can use report RUTDBCHK. It does the se14 functionality. Maybe debugg some and you will find the corresponding FM related, which would in turn return an error / information about the status

  • Class diagram for database objects.

    Hi,
    I am creating a diagram from the tables in the database in Oracle Jdeveloper 10g. This will basically give me a ER diagram. When I drag and drop a table - say EMP - i get a window - "Create from database object" - which gives me a few options. I selected the "Offline database objects" option. The table appears in the class diagram sheet with the table name, it's columns and the constraints.
    Now when I remove this object (table EMP) and then again try to drag and drop the same object as above, I get the object on the sheet as EMP1 and not EMP and also the constraints are renamed. It does not allow me to change the name to EMP. It gives a message that -"TABLE names must be unique" and the table name is renamed to EMP1.
    I want the name as EMP only. How do i do it?
    Thanks,
    Vinay

    Vinay,
    It's because in the first step, you deleted the table from the diagram, but not from the offline database. Now, when you drag a table from the database connection, it will need to create a new offline table. Instead of dragging from the DB connection, drag it from the offline database (it should already be there from the first step). Alternatively, delete the offline table as well as part of your first step (deleting the object from the diagram).
    John

  • EA2 - request support for database roles

    Would like to see database roles supported in the Connection Navigator for a schema, just like tables, views, etc. Need to be able to create/drop/copy/view roles, see what users or roles have been granted to a particular role, view or update what roles/object privs/system privs this role has been granted.

    Feature requests should be made according to the instructions in the "Feature Requests" sticky on the forum (http://forums.oracle.com/forums/ann.jspa?annID=444). If you go there and search on Roles, you will find an Accepted feature request for Roles Node. How soon this will be built into SQL Developer is another matter - we will have to wait and see.
    theFurryOne

  • Are custom ContextMenu supported for Sprite objects?

    Hello,
    I have a component that dynamically create and attach as
    child some Sprite objects. I'd like to provide a contextual menu
    for those visual elements, but I noticed that, even by default,
    right-clicking on them displays a different menu than the usual one
    (it seems to contains all the flash menu items - zoom, rewind,
    etc., while the flex one only show a few).
    Attaching a flash.ui.ContextMenu object to the .contextMenu
    property of those Sprite doesn't produce any effect: the same items
    are still displayed. If I attach the same ContextMenu object to
    another component (e.g. an UIComponent), it works as it should.
    Note that I set the mousEnabled property for those Sprite,
    and I'm able to handle the standard mouse events (click, enter..).
    Is this a known limitation?
    Thank you
    Cosma

    Post Author: jsanzone
    CA Forum: General Feedback
    Izhar,
    I would suggest going to the Business Objects Support site and doing a search on "portal integration kit" (and before clicking on search, choose your product via the "Products:" indicator, as well as choosing the Document Types of "Kbase Articles", "Product Documentation", and "Technical Papers").

  • Add support for swf objects

    Being able to use preexisting swf's would be a boon for Rome.  And would let flash developers be able to create new interactive objects and animations for Rome as well.

    Hello,
    There are technical limitations that apply here. You can always share  objects via the Object Exchange which can then be embedded into ROME  projects.
    Thanks for the feedback!
    Sarah
    Sarah
    Forum Moderator

Maybe you are looking for