Support for disks in CIVS-MSP-4RU

I tried install WD 1 TB RED Disk in 4RU chassis, I found that it Works ok in all slots but in some cases slots like 11, 19 and 20 doesnt works, using lsi preboot utility doesnt shows any disk inserted in these slots. Had anyone facing same situation?
Sent from Cisco Technical Support iPhone App

Your milleage will likely vary with untested and unsupported HDDs. Unfortunately I can't provide any insight as we only utilize supported HDDs from Cisco as we must have vendor support for our installations.
I'd recommend checking support documentation from the RAID HBA vendor. In this case, LSI.
Best of luck,
Scott Olsen
Solutions Specialist
Bulletproof Solutions Inc.
Web: www.bulletproofsi.com

Similar Messages

How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so much

http://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

Help! Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"

I'm on a MacBook 13" mid 2010, OS X 10.7.5, I want to upgrade to OS X Mavericks. I have searched around for a few days, I find people with the same problem but can't really get the solution for it. I prefer not to reinstall OS X, I want to upgrade. I don't have boot camp or something just a 250 GB HD.
Well, while I'm trying to upgrade from the download from Apps Store, I open the installer, press continue then accepts the Terms.. then select Macintosh HD and click install, then an warning message shows up "Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"
As I've read the article that is included in the waring message i did try to install anyway because it say that I would be fine, but when i did try to install the installer starts and after like 3 minutes a window appears, Install Failed.
I've even try to make a installer on USB, both with the command in terminal and with Diskmaker, but it does not help.
It seems impossible to upgrade. Please Help me.

First, see the heading "What to do if the installer warns that no Recovery System can be created" in this support article. If you use Boot Camp, back up and delete the Windows partition using Boot Camp Assistant. Try the installation again.

Some features of Mac OS X Lion are not supported for the disk

At the beginning of the installation on my MacBook Pro (early 2008, non-unibody) this alert appeared. The disk is partitioned into three partitions: 1. = Photoshop-scratch, 2. = System, 3. = Bootcamp. It seems that this causes the system-message. What could be the reason for that: The Photoshop-partition or Bootcamp? Is it possible to erase just the PS-partition and then install Lion or do I have to reformat the disk?
Message was edited by: Stefan Gregor (... **** orthography ...)

OS X Lion: 'Some features of Mac OS X Lion are not supported for the disk (volume name)' appears during installation

Support for P2V for GPT disks under 2 TB?

Hi,
Is there support for converting P2V machines With VMM 2012 when disks are configured With GPT and are under 2 TB?
Regards,
Geir Tore
Regards, Geir Tore Johansen EmmaEDB AS www.emmaedb.no

VMM does not support GPT disks on P2V targets.
Source: http://blogs.technet.com/b/scvmm/archive/2012/05/15/kb-p2v-fails-with-gpt-partitions-in-system-center-virtual-machine-manager.aspx

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

If you paid for what you used then it was not a trial.
Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Lost camera raw support for canon 1ds markI in mountain lion

I seem to have lost system support for camera raw files for the original Canon 1ds (what you might call the markI). There's been two recent raw support updates, and I'm not sure if it occured with the first for those two updates or with update to Mountain Lion itself (which I recently clean-installed). I noticed it after the first raw support update (Digital Camera RAW Compatibility Update 4.01) but it could have happend with Mountain Lion install and I just didn't notice. In any case, I definitely don't have support for the camera raw files, finder shows only the generic TIFF icon thumnail (the raw files from the markI 1ds were of the extension .TIF, before canon moved on to .cr2 format..). Preview and Aperture can preview the file but without any custom white balance or other info stored with the raw file from camera.
Anybody else experience this or know fix?
Thanks!
For anyone wanting and willing to test on their machine, I'll post a link to a test raw file.... hmm, apparently this support forum does not allow for the linclusion of a link to an image file, but I'll see if it allows for a link to a zipped folder with image inside... I suppose I wouldn't download a .zip file myself but for anyone braver than I:
http://laglj.com/2012hirez/1dsTestFile.zip
Thanks,
Lane
laglj.com

Lane,
That latest raw update also shows supported devices. The EOS-1Ds is still shown as supported by Mountain Lion in the knowledge base article that accompanies it. Bump!
I wonder if using Disk Utility and verify/fix permissions may restore your RAW capability.
Don't have Aperture or Lightroom.
I installed the recent raw updates into 10.8.2. The DB5W2360.TIF file has a generic Preview icon. Graphic Converter 8.3.1 opens .cr2 files, and it opened this TIF file nicely as well. GC is willing to modify white balance with a condition that it cannot be done in place, and must be exported to a different format.
Not much help, I know.

No idvd, no iweb, no telephone support for Ph!!

hi! i just purchased a mac, i am a new user.. i find it amazing and all, but i cannot copy my videos to a dvd because i dont have idvd and iweb!! i became so frustrated over it.. and i tried all the forums and apple support, only to find-out there is no telephone support for the Philippines.. what should we do about it?? HOW can you import imedia to idvd if you dont have idvd?!!! I purchased my macbook pro in its full priced yet my software ilife'11 is not complete.. in apple store, if you purchase the ilife'11 os the iweb and idvd is bundled, i already paid for the package pre-installed why don't i have those?! and why dont we have a dvd copy of our softwares?!! i REALLY REALLY REALLY need to import my videos so i could keep my projects because it is already paid.. PLEASE PLEASE HELP! i dont even know where to contact support for my mac... i hope you understand and you could help...

If you purchase iLife 11 on disk (not a download) you will get iDVD and iWeb.
Most of us here sympathize with your situation.

Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance.

I have an iMac that meets system requirements. I have downloaded CS4 from Adobe and when I try to install it says "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance." This happens while it is checking the system profile. I have read many forums and tried the following:
Re-downloading the software
Moving the download to an external drive to install
Deleting all Adobe programs on my computer
Clearing all caches
Installing in safe mode
Verifying the disk
Creating a new administrator and then installing
Attempting to re-install after the error
None of these options have seemed to make a bit of difference. If there is another option could someone please share? Adobe said they will not ship actual discs although I own the program. They have yet to be able to help me when I have called.
Thank you in advance for any help!

cs4 wasn't designed for that os, System requirements | CS4, Point Products
you can check other users success here, http://roaringapps.com/apps:table
you can try cleaning before installing, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and, if all else fails, you can check your log files for more detailed error info, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Support for Topics in XI JMS Adapter

Hello Everyone,
I am trying to configure Topics instead of queues for JMS Adapter and I am not able to exchange messages with Topics. However, when I change Topics with Queues in JMS configuration file on XI 2.0, the scenario works okay.
Can anyone let me know if JMS adapter for XI 2.0 or XI 3.0 supports topics. If yes, then what changes should I make in order to exchange messages with Topics via JMS adapter.
Thanks,

Hi Lalit,
No support for JMS topics in SAP XI 2.0 nor XI 3.0.
I don't know why it isn't supported. Maybe SAP wants to avoid the hassle of configuring durable subscribers. And customers forgetting to remove durable subscriptions whereby message pile up until the JMS broker runs out of disk space.
Kind regards, Guy Crets

Feature request: Support for Multiple Libraries (like in iMovie)

From the threads, I can tell this topic was raised by many for many years. I would like to propose support for multiple iPhoto libraries -- or more specifically, the ability to distribute media across different storage devices.
There is a huge gap between my spacially limited MBP 250 GB SSD and my external 4 TB HDD. I am aware that I can juggle two separate libraries in iPhoto but it's just not practical and the moving of media between the libraries is not a simple drag and drop effort but involves exporting and importing with me having to clean up on one side or the other.
iMovie has had support for several libraries for a long time presumably because the sheer size of media in the video realm gave the iMovie team little choice.
I can't be the only one having this itch, right?

Again, you need to clarify your terms
Aperture can move master photos files around. With Aperture you can write additional metadata to the original file.
You don't need multiple libraries to thematically arrange photos, though. A simple keywordign system will do that.
So in Aperture I don't have to restart into different libraries?
You can have all your photos in a sinble library with the master files stored off-disk easily. You can relocate them from disk to disk too. However, if you;re doing presentations that is probably not necessary if you generate good quality previews. I'd ask about these things on the Aperture forum for more.

The storage where the virtual hard disk is located does not support virtual disk sharing

Hi everyone,
I deployed 2 hyper v vitual machines a while ago, and i did that because I needed to test my current game Project, which is an
online game. However, i've had some problems with my Windows installation then I had to reset the pc by making it a refresh
install. I still have the hyper v virtual disks, but i cannot attach it to a new hyper-v virtual machine. it pops up this message:
"the storage
where the virtual hard disk is located does not support virtual disk sharing". I dont know anything about virtual machines, so I
didnt know I had to make the disk sharable. How can I force to attach the hard disk to a new hyper-v? I dont want to go t
hrough the whole proccess of installing the operating system all over again and updating it....
Any help is greatly appreciated!
Thanks in advance,
Romulo Romero

Hi MrDebugging,
>>
When I Try to add a SCSI Controller, and then I click browse to add a UNC I get this:
C:\Users\Public\Documents\Hyper-V\Virtual hard disks\ClienMachine.vhdx
but I tried placing in different location, and the same problem occurs!
By the way, Im not on a server , I am a domestic user and I am running it on my
Windows 8.1
According to the error message , it seems that it is not a permission issue .
The VM is Gen 1 or Gen2 ?
Generally the error message occurs when you enable "shared vhdx" on standalone/client hyper-v host :
Please try to attach the VHDx file to IDE controller if it is a Gen 1 virtual machine (because only the SCSI controller has the option "virtual hard disk sharing" and Gen 1 VM only can boot from IDE )
All in all , please do not use this feature without CSV or Scale-Out File Server with SMB 3.0 on file-based storage .
If it is not the case , please detail steps what you did .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Support for Shared Variables in Third Party XP embedded based TPC's?

I have deployed an application in an XP embedded based Touch Panel (Third party). The application is working fine, but the shared variables hosted on an RT (sbRIO Board) are not getting updated in the application on TPC
1. The TPC is part of the project as Windows XP Embedded Touch Panel
2. NI TPC Service has been installed on the TPC and the application can be deployed remotely from the development PC through ethernet. (Hence network connections and communications are OK)
3. By using Distributed Systems Manager in the development computer, I can see that the shared variables are getting updated on the network
I believe that the problem can be solved if the following programs are installed on the TPC
A. Support for shared variables for XPembedded
B. Shared Variable engine
I have tried installing support for shared variables from Program Files > National Instruments > Labview 8.6 > PDA > Utilities > Variables > x86 - but am getting an installation error "Unable to find application manager for Pocket PC applications".
Shared variable engine has been installed from ve220 folder. The program is getting installed. But the Variable Engine is not started Control Panel > Administrative tools > Services in Xpe, the service is stopped and cannot be started. When I try to start the service, I am getting the following error on TPC
"Could not start the National Instruments Variable Engine Service on the local computer.
Error 1053. The service did not respond to the start or control request in a timely fashion."
Please suggest solutions for the above or alternate locations for the following:
1. Support for shared variables for XP embedded TPC's
2. Shared Variable engine installer program.
Thanks
Krish
Solved!
Go to Solution.

Problem solved!
Update for interested folks working on XP Embedded TPC's
Just to make sure that Shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However since the TPC was having only 1 GB of DOM (Disk on Memory) and with all the software I had tried, there were only a few Megabytes left on the system. I had to add another DOM of 2 GB.
All the products of the Installation went fine, with the exception of NI Logos (Version 5.0). NI Logos installation failed repeatedly. I tried installing NI Logos separately, with the same results. Then I had this gut feeling that NI Logos had something to do with the issue.
I then downloaded the new version of NI DSM 2009 SP1. Although this was supposed to get installed on any fresh system without Labview, the installation would not proceed beyond the setup stage. I tried installing NI Logos from the products folder on the new download separately and it worked like magic!
Once the new Logos (Ver 5.5) got installed, the Shared Variable Engine started automatically and the Shared Variables were finally unleashed - free to rise and shine! Thank God Almighty!!
On the lighter side, come to think of it - for running an application of around 400KB, we need XP embedded, NI Run Time, Logos, DSM .......... (all around 900MB). Can we make it any simpler?!! Inviting your comments .......
Thanks
Krish

Support for using TNSNAMES with Oracle Thin Driver?

Hi.
In the official Oracle JDBC FAQ (http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm), they say that from the "10.2.0.1.0" release, the Thin driver hast support for using TNSNAMES entries. Thus, you can use URLs like this:
jdbc:oracle:thin:@GL (thin driver, but connection info defined in tnsnames.ora)
Does anyone know how could I use an URL like this? Do I have to install the Oracle client? or can I simply copy a tnsnames.ora file someplace on disk and specify its ubication through an environment variable or something like that?
I haven't find util information in the Oracle site....any ideas are much appreciated.
Thanks in advance.

I just found some info here:
Re: Thin Driver and Load Balancing
Thank you very much.

[svn] 4138: * Added support for SWC reuse.

Revision: 4138 Author: [email protected] Date: 2008-11-19 08:15:59 -0800 (Wed, 19 Nov 2008) Log Message: ----------- * Added support for SWC reuse. This isn't just reusing the bytes to lower I/O, which we were already doing. This means not reparsing the bytes unless they become out of data. The trick with making this work is validating each of the SWC based cached CompilationUnits at the beginning of each compilation. When a SWC based CompilationUnit becomes obsolete or is removed from the library path, all the CompilationUnit's, which depended on it, are forced to be recompiled. Note: bugs with the SWC reuse logic often show up as errors claiming that type foo is not an instance of type foo. This most likely means that foo was reloaded, but something that depended on foo wasn't reloaded. Please file bugs for any errors like this and give me a heads up. Flex Builder has logic to take advantage of this change in the case of application compilations, but it will need to be updated to take advantage of SWC reuse in the case of library compilations. The biggest benefit of this change will be seen when all the libraries and applications in a workspace share a SwcCache. Updates to the performance testsuite to enable it to take advantage of these changes will follow. tests Passed: checkintests, performance testsuite, fcsh unit tests Needs QA: YES Needs DOC: NO API Change: Yes - a few changes to the OEM compiler API Reviewer: Pete and Darrell Code-level description of changes: modules/asc/src/java/macromedia/asc/util/ContextStatics.java Added clearUserDefined(), which allows Flex to use one ContextStatics instance when compiling multiple libraries and applications. If we didn't clear out the userDefined Map, definitions from one compilation could potentially spill over into others where they might not be defined or might be defined differently. modules/compiler/src/java/flex2/tools/oem/Application.java modules/compiler/src/java/flex2/tools/oem/Library.java Renamed instance variable "configuration" to "oemConfiguration". Renamed method param "OEMConfiguration c" to "OEMConfiguration localOEMConfiguration". Renamed local variable "OEMConfiguration c" to "OEMConfiguration tempOEMConfiguration". Removed a bunch of duplicate code from recompile(). Added support for reporting the start and end of a "full" compile. Before full compiles were reported as "inactive". Added support for using LibraryCache's new perCompileData variable. Modified Library.link() to use a SwcDynamicArchive instead of a SwcWriteOnlyArchive when the file name is known. This allows us to reuse the compilation units in the archive for subsequent compilations. modules/compiler/src/java/flex2/tools/oem/LibraryCache.java Added contextStatics variable and accessors. modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java Updated to leverage CompilationUnit.hasAssets() and to reflect change in type of CompilationUnit's inheritance, namespaces, types, and expressions. modules/compiler/src/java/flex2/tools/oem/internal/OEMUtil.java Modified areSwcFileChecksumsEqual() to ignore timestamp changes with catalog.xml and library.swf. When we are reusing cached SWC's, the catalog.xml and library.swf are updated each time we save the SwcDynamicArchive, but we don't want to reload the SWC from disk, because all the compilation units represented by catalog.xml should be cached. If any of the cached CompilationUnit's becomes out of data, CompilerAPI.validateCompilationUnits() will handle removing the cached CompilationUnit, which will cause it to be reloaded from disk. modules/compiler/src/java/flex2/compiler/swc/SwcCache.java Renamed "swcs" to "swcLRUCache" to reduce confusion with other variables named "swcs". Added tracking of removed and updated cached Swc's. Removed cleanExtraData(). modules/compiler/src/java/flex2/compiler/swc/SwcArchive.java Added generics to getFiles(). modules/compiler/src/java/flex2/compiler/swc/SwcGroup.java Added tracking of obsoleted scripts. Updated updateMaps() to favor scripts with a cached compilation unit. modules/compiler/src/java/flex2/compiler/swc/SwcScript.java Replaced misc with compilationUnit. Added toString() to aid with debugging. modules/compiler/src/java/flex2/compiler/swc/SwcDirectoryArchive.java Added generics to getFiles(). modules/compiler/src/java/flex2/compiler/swc/SwcPathResolver.java Updated resolve() to prevent resolving foo.swc$bar.css to blah.swc$bar.css, which was causing the framework.swc defaults.css's timestamp to be compared with the charting defaults.css timestamp. Grrr. modules/compiler/src/java/flex2/compiler/swc/Swc.java Updated to allow exported Swc's to be used for reading. modules/webtier/j2ee/servlet/src/java/flex/webtier/server/j2ee/IncrementalCompileFilter.j ava modules/compiler/src/java/flex2/tools/Fcsh.java Updated to reflect removal of unused CompilerSwcContext constructor arg. modules/compiler/src/java/flex2/tools/PreLink.java modules/compiler/src/java/flex2/tools/CompcPreLink.java modules/compiler/src/java/flex2/linker/SimpleMovie.java modules/compiler/src/java/flex2/compiler/as3/EmbedExtension.java modules/compiler/src/java/flex2/compiler/as3/EmbedUtil.java Updated to leverage CompilationUnit.hasAssets(). modules/compiler/src/java/flex2/compiler/util/Name.java Added as super class for MultiName and QName, so collections containing both could be strongly typed. modules/compiler/src/java/flex2/compiler_en.properties modules/compiler/src/java/flex2/linker/CULinkable.java modules/compiler/src/java/flex2/linker/ConsoleApplication.java modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java modules/compiler/src/java/flex2/compiler/PersistenceStore.java modules/compiler/src/java/flex2/compiler/abc/AbcCompiler.java modules/compiler/src/java/flex2/compiler/as3/EmbedEvaluator.java modules/compiler/src/java/flex2/compiler/as3/EmbedSkinClassEvaluator.java modules/compiler/src/java/flex2/compiler/as3/managed/ManagedExtension.java modules/compiler/src/java/flex2/compiler/as3/As3Compiler.java modules/compiler/src/java/flex2/compiler/as3/StyleEvaluator.java modules/compiler/src/java/flex2/compiler/as3/HostComponentEvaluator.java modules/compiler/src/java/flex2/compiler/as3/SyntaxTreeEvaluator.java modules/compiler/src/java/flex2/compiler/as3/binding/BindableExtension.java modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java Updated to reflect change in type of CompilationUnit's inheritance, namespaces, types, and expressions. modules/compiler/src/java/flex2/compiler/Source.java Removed fileIncludes, because fileIncludeTimes's keys were the same set. Updated to reflect change in type of CompilationUnit's inheritance, namespaces, types, and expressions. modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java Increased use of generics. modules/compiler/src/java/flex2/compiler/CompilationUnit.java Changed inheritance, namespaces, types, and expressions from a Set to a Map, so we could track the last modified time when the Sources were last used. This allows us to track if they changed. Made assets lazily created. Removed "misc" context attribute usage. modules/compiler/src/java/flex2/compiler/CompilerSwcContext.java Removed unused fullCompile variable. Added logic to track obsoleted and removed Sources. modules/compiler/src/java/flex2/compiler/CompilerAPI.java Significantly refactored validateCompilationUnits(). It now validates sources from the CompilerSwcContext and in the case of library compilations, it validates the included classes. It also builds up a backwards dependency map, so we can remove all the dependencies when a source is removed. This made the DependencyGraph usage unnecessary. The DependencyGraph usage also happened to be flawed, because it really should have been looping each time a potential "type" or "expression" source was removed until no new sources were removed. I actually tried implementing this and it was incredibly slow. Added dependentFileModified() helper method. modules/compiler/src/java/flex2/compiler/as3/reflect/NodeMagic.java Removed out of date comment. modules/compiler/src/java/flex2/compiler/as3/InheritanceEvaluator.java Replaced use of MultiNameSet with HashSet<Name>. modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension.java Changed timestamp for WatcherSetupUtil to the same as the mxml document. Now that we validate sources in the ResourceContainer, any changes of Bindable metadata in dependent sources will cause a recompile. The use of System.currentTimeMillis() was a hack. modules/compiler/src/java/flex2/compiler/css/StyleModule.vm Removed unused import. modules/compiler/src/java/flex2/compiler/SourcePath.java modules/compiler/src/java/flex2/compiler/io/LocalFile.java No change in functionality. modules/compiler/src/java/flex2/compiler/FileSpec.java Added use of CompilationUnit.hasAssets(). modules/compiler/src/java/flex2/compiler/util/QName.java modules/compiler/src/java/flex2/compiler/util/MultiName.java Changed superclass to Name and consolidated localPart logic. modules/compiler/src/java/flex2/compiler/util/MultiNameMap.java Added some generics. Modified Paths: -------------- flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerSwcContext.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/FileSpec.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/PersistenceStore.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Source.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SourcePath.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/abc/AbcCompiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/As3Compiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/EmbedEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/EmbedExtension.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/EmbedSkinClassEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/EmbedUtil.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/InheritanceEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/StyleEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SyntaxTreeEvaluator.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/BindableExtension.jav a flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension. java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/managed/ManagedExtension.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/reflect/NodeMagic.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vm flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/io/LocalFile.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/Swc.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcArchive.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcCache.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcDirectoryArchive.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcGroup.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcPathResolver.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcScript.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MultiName.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MultiNameMap.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/QName.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties flex/sdk/trunk/modules/compiler/src/java/flex2/linker/CULinkable.java flex/sdk/trunk/modules/compiler/src/java/flex2/linker/ConsoleApplication.java flex/sdk/trunk/modules/compiler/src/java/flex2/linker/SimpleMovie.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/CompcPreLink.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Fcsh.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Application.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/LibraryCache.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMUtil.java flex/sdk/trunk/modules/webtier/j2ee/servlet/src/java/flex/webtier/server/j2ee/Incremental CompileFilter.java Added Paths: ----------- flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/Name.java Removed Paths: ------------- flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MultiNameSet.java

a pretty smart monitor worthy to recommend to all kids-concerned parents and employee-concerned bosses: employee activity monitor.
Learn morefrom here:
www.employee-activity-monitor.com

Support for disks in CIVS-MSP-4RU

Similar Messages

Maybe you are looking for