Support for Fieldpoint software under Labview 7.1?

I'm upgrading an application written in Labview 6.1 and Fieldpoint 4.0.1 to Labview 7.1. Is there a new version of the fieldpoint software that is available that supports 7.1? Any other pitfalls to this conversion that I should be aware of?
Wade Hutchison
Bucknell University
[email protected]

NI-FieldPoint Version 4.1 for Windows 2000/XP
At http://digital.ni.com/softlib.nsf/websearch/7CF3FDE2EC1C043D86256EBC006FC786?opendocument&node=132060_US

Similar Messages

  • Oracle support for Weblogic 7 under LINUX

    Hi,
    Does anyone know what happened to oracle support in weblogic 7.0 for linux platform,
    as it seems that the drivers are not included? Are there any discussions on that
    topic anywhere?
    thanks.
    Zlatko

    It DOES appear that there is support for WebLogic jDriver for Oracle on Linux:
    see http://e-docs.bea.com/wls/certifications/certifications/redhat_linux.html#39532
    The strange thing here is that, apparently, the Oracle drivers located @ lib/linux/i686/oci817_8/libweblogicoci38.so
    and lib/linux/i686/oci817_8/libweblogicoxa38.so are "Type 2" ODBC drivers which
    require an Oracle client to be installed on the WebLogic machine, but Oracle doesn't
    support installation of the client on RedHat 7.2, which is required (according
    BEA's doc) for installation of WebLogic 7.0. Can someone reconcile this apparent
    conflict?
    Laurent Goldsztejn <[email protected]> wrote:
    Hi,
    There is currently no support for WebLogic jDriver for Oracle on Linux
    with WLS 7.0. Please check the following page for update on this topic.
    http://www.weblogic.com/platforms/index.html#jdbc
    Zlatko Mesaros wrote:
    Hi,
    Does anyone know what happened to oracle support in weblogic 7.0 forlinux platform,
    as it seems that the drivers are not included? Are there any discussionson that
    topic anywhere?
    thanks.
    Zlatko
    Thank you,
    Laurent Goldsztejn
    Developer Relations Engineer
    BEA Support

  • DSPCon is looking for a Software Engineer/LabVIEW-based application development

    E-mail resume to [email protected] Please Visit Our Web-Site for full job description. www.dspcon.com
    DSPCon specializes in the development of real-time data acquisition and analysis systems for use in a variety of Digital Signal Processing intensive applications such as shock and vibration analysis, rotating machinery analysis, and digital recorder applications.  DSPCon provides high-end system solutions into both the Commercial and Defense markets.
    With a variety of hardware and software products in our line, DSPCon has the ability to provide COTS-intensive, cost-effective solutions for any digital signal processing project.
    Consistently chosen by the US Government and Fortune 500 companies, DSPCon has hundreds of systems in operation today ranging from high-channel, high-bandwidth data acquisition and analysis systems for wind tunnel applications, to infrared processing, analysis and archiving systems for defense related applications.
    DSPCon is looking for a Software Engineer with a successful track record in design and development of new products and bringing them to market in a 9- to 12-month time scale.

    Hi,
    There is a section for companies looking for LV developers, here:
    http://forums.ni.com/ni/board?board.id=JobPost
    You should mention where the job is offered and if it is something that can be developped off-site (for consultants like myself, tbob, Ben and a number of LV developers).
    Hope you find the right candidate. 
    Ray

  • No support for floppy disks under Snow Leopard?

    I suddenly am not able to use my floppy drive anymore. Granted, I seldom ever use it, but I wanted to just back up some small files, and inserted a disk into my external floppy drive, and I'm no longer allowed to write to a floppy disk. I have the little slider button in the unlocked position, and I was always able to write to a floppy with my old OS, Tiger. Now I have a new iMac computer with the most update version of Snow Leopard, and I cannot write to a floppy disk anymore. Does anyone else still have one of these, to tell me what is going on with it? Did Apple just discontinue support at all for floppy disks? I can still insert the disk and read what is on it, and even copy it to my desktop, but I cannot write to the disk. I've tried several different ones, and they all tell me the same thing. Under Info and Permissions, it says that I am only able to read the disk, and it won't let me change it at all. I guess if this is not possible anymore, I can just toss this device, but it pains me, because I'd still like to be able to use it. Thanks for any information you can provide.
    Kristy

    Hi Kristy
    It sounds as though you have solved your problem but I have found a way to fully access floppy disks formatted as Mac OS Standard. This may not work for all though because I have access to a Windows 7 PC.
    On my mid-2011 iMac running OS X 10.8.2 (Mountain Lion) I was trying to download and copy onto floppy disks (for an old Macintosh) some software downloaded from the internet.
    I found, as you did, that I could read such disks via a USB floppy disk drive, but that I could not write to them.
    Thanks to your post I realised that it was simply because such formats have only limited support in more recent versions of OS X.
    There is software called MacDisk for Windows. I just ran it in Windows 7 running as my Bootcamp partition accessed via VMWare Fusion. The software is free to test (with some limitations).
    I just successfully copied a file via it to a disk and then was able to read it on my iMac.
    Hope this helps you, or anyone else looking to do such strange things.

  • Find my Friends : Support for multiple users under the same Apple ID?

    Can multiple users under the same Apple ID use the app to find each other?  My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time.  If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

    http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
    This worked for me.

  • My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

    My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • I need to download firefox 5, it is the highest version supported for the software we are using. where can i go to get the download.

    We desire to test Firefox for use on various programs we utilize. One of which only supports Fireforx 5 at this time. I need to download version 5 for testing and further consideration.

    Try the portable version: http://www.freesmug.org/portableapps/firefox/

  • Does Y.1731 support for VPLS service under ASR 9000 platform?

    Hi All,
    we are planning to setup OAM for monitoring performance of our VPLS service interface? By checked Cisco document, I couldn't find related document  that can confirm Y.1731 support multi-point to mulit-point interface by full mesh topology in our environment.
    Does someone have this kind of experience that could share with me?  The document or configuration example are welcomed as well.
    Thanks in advance,
    Eric.

    thanks Xander for your input!
    on top of this question. Actually, I am looking for better solution to monitoring mutli interfaces at same time. In our environment, we have many of this kind L2vpn setup for customer. instead of monitor end by end,  we want to monitor them from central point of view. do you have a better idea for this?
    I attached one customer setup example below, and diagram as well.
    At the meantime, we also looking for a good idea for how to setup hierarchical monitoring system that it could cross other SP domain.
    thanks,
    Eric.
    PE-siteA:
    ============
    L2vpn
     pw-class encap-mpls
      encapsulation mpls
    bridge group customer
      bridge-domain customer
       interface GigabitEthernet0/1/0/1.100
       vfi 100
        neighbor PE-siteB loopback-IP pw-id 100
         pw-class encap-mpls
        neighbor PE-ASBR loopback-IP pw-id 100
         pw-class encap-mpls
    =============
    PE-siteB:
    ============
    bridge group customer
      bridge-domain customer
       interface GigabitEthernet0/2/0/1.100
       vfi 100
        neighbor PE-siteA loopback-IP pw-id 100
         pw-class encap-mpls
        neighbor PE-ASBR loopback-IP pw-id 100
         pw-class encap-mpls
    =============
    PE-siteC:
    =============
    bridge group customer
      bridge-domain customer
       interface GigabitEthernet0/1/0/2.100
       interface GigabitEthernet0/5/0/2.100
       vfi 100
        neighbor PE-siteA loopback-IP pw-id 100
         pw-class encap-mpls
        neighbor PE-siteB loopback-IP pw-id 100
         pw-class encap-mpls
    ==============
    PE interface setup:
    ==============
    interface GigabitEthernet0/1/0/2.100 l2transport
     encapsulation dot1q 100
     rewrite ingress tag pop 1 symmetric
    =================================

  • Mail - Support for Multiple Identities (under one OS account).

    Let me define what I mean by an "Identity" before that is misunderstood.
    In Entourage, you can have multiple email accounts (just like in Apple Mail). However you can create multiple Identities, each of which only has access to that Identity's email accounts.
    For example, the Mac is operating using one User Account: lets call this account "Dave". Now while logged into this User account on the Mac, I can have an Entourage Identity called "Dave - Personal" that only has access to a group of personal email accounts. I can then (within Entourage) switch to an Identity called "Dave - Work" that would then only have access to my work email accounts.
    All the while, regardless of which Entourage Identity I am using, I am at all times still logged in to the Mac User account "Dave", so I have access to all of the same data (documents, etc.).
    Is there a way to have Apple Mail operate in the same manner?
    Before anyone asks why....
    I keep my work emails and my personal emails in different Identities, within the same Mac User account. I do not open up the work Identity (with the work-related email accounts) after 5 p.m. weekdays or during the entire weekend. (This way, I don't have to see or worry about work!) However, whether I am at work or at home, (or anywhere else) I still want to have access to all of the same data within my Mac User account. So, the solution that most people may recommend, which would be to create separate Mac user accounts for each Identity, doesn't really solve my problem.
    Does anyone know if this type of functionality can be had using Apple Mail? I am growing tired of Entourage, and this is one (of several) reasons I have still not switched to Apple Mail.

    In a word, No. To accomplish that you must create a separate user account. You can have multiple email accounts within Mail, however. But not as a separate identity as in Entourage.

  • What is the last version of labview to support classic FieldPoint?

    what's the last version of labview to support classic FieldPoint?
    Solved!
    Go to Solution.

    In general, yes.  Others with more experience than I do might be able to help.
    I think there is a chance you can get some older versions of LabVIEW to work on Win7.  There are occasional message threads where people have asked about a particular version and others said they have been able to get them to work.  Just that official support for older versions of LabVIEW for a Win7 OS has ended.

  • Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

    Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic.  If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help.  Thank you very much! -Nick
    Nicholas Ricchiuto
    B&V Stafffing Inc
    724-933-5218
    [email protected]
    ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

    Please post this to the LabVIEW Job Openings board.

  • Solaris 10 Support for CSA

    Is solaris 10 supported for CSA software, I can only see solaris 8 and 9 on the tech specs

    Currently Solaris 10 is not supported in CSA 5 or the upcoming CSA 6. I am told that they will be adding Solaris 10 for CSA 6 but it is unknown as to when this will be released.

  • Need license key for a software I bought

    I got the Mundu Radio Plus from the App World. I did not get the license key. I contacted the support for the software and they told they can not generate a license key, that this is done by the App World. Please inform how to get this license key. Thanks,

    You shouldn't need a license key if the app was purchased in AppWorld, the license key is part of the "purchase" and should recognize as a paid app.
    If you continue to have problems with this, call your mobile provider tech support and have them escalate this issue to RIM level tech support.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Nikon D750 not supported for tethered shooting??

    I just got a brand new Nikon D750 and realized that obviously this model so far is not supported for tethered shooting under LR 5.7
    Does anyone have similar experience or new information ??
    Best, Stephan

    And if you'd searched before posting, you wouldn't have needed to post.

  • Windows 7 64bit driver support for GX623

    Hi, i have GX623 laptop (CPU:Intel Core 2 Duo P8400; RAM: 4GB ), i am interested why there is no Windows 7 64bit driver support for this model ? I really would like to run some 64bit software on it.
    If my laptop hardware support it why MSI don't release drivers so my software can also support it. In some 32bit drivers there are some 64bit drivers but still not all for complete functionality.
    On some older posts from 2009 I see responses that windows 7 64bit is very new so that's the reason for no driver support but in 2011 surely that is not the case.
    Can we expect 64bit drivers for Windows 7 in near future or support for 64bit software isn't planed for this model?

    So is it officially GX623 supported for Windows 64bit install because I still don't see any drivers for Windows 7 64bit or maybe Windows 7 64bit don't need any drivers?
    Hello anybody here? Anybody working here?

Maybe you are looking for