Support for HTTP PUT and HTTP DELETE

Is there a plan for proper HTTP PUT and HTTP DELETE in Flash
Player and/or Flex? There's not much information on the subject at
this point. Is this going to be included in Flex 3? Is there an
issue I can track? etc.

This is due to a limitation in the Flash Player so it will
not be available
in Flex 3.
Please continue to log enhancement requests against the Flash
Player here:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

[svn:bz-trunk] 7494: Add testcaseses for http put and delete methods.

Revision: 7494
Author:   [email protected]
Date:     2009-06-02 13:13:33 -0700 (Tue, 02 Jun 2009)
Log Message:
Add testcaseses for http put and delete methods. Proxy should return endpoint's content instead of empty body
Added Paths:
    blazeds/trunk/qa/apps/qa-regress/remote/testMethods.jsp
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/proxyService/httpservice/bugs/Pu tAndDeleteMethodTests.mxml

found it - here: http://discussions.apple.com/thread.jspa?threadID=2323131&tstart=30
I set the Realm to Location instead of Folder. Now I'm prompted for my credentials at the /svn/ URL.

IWeb protocol support for anything OTHER than http and https

I am extremely disappointed in iWeb. It doesn't even seem to be able to do very simple things.
All I want to do is to create HTML links to external pages with protocols other than "http" and "https" and it always prepends "http" to the beginning of the URL. This is really really really annoying.
Apple I hope you are paying attention. iWeb is poorly designed. You are trying to anticipate what end users want...this is a development practice right from the Microsoft Windows Developer book. I sure how the next update to iWeb works properly. I'm so upset about all this...I can't publish podcasts to the web because of all the foolishness with how you handle that, and the confusing directory name issues.
My podcast URL looks like this:
http://itpc://www.mysite.com/podcast/News/rss.xml
I tried (unsuccesfully) to manually create the podcast since the automated version created this:
itpc://www.bradyconsult.com/podcast/podcast/News/rss.xml
I'm sure I could fiddle with iWEb and get this to work, but why should I? I've already fiddled with it and simple changes to my site structure totally screw this up. Not to mention, that when it did work, it didn' t even post all my podcasts!!! It skipped the first one and the last one.
And, for those wondering, i'm not technically clueless. I have a podcast working just fine on two other sites. The appeal to iLife with iWeb and the new podcast feature of GarageBand was to bring all this together in one easy to use, nice package. But it's not nice. Garageband's update is awesome! But iWeb and it's attempts to work with the other iApps is gruesome.
I expect this garbage from Microsoft...not Apple.
Can anyone recommend a workaround (and yes, I understand I can manually edit HTML...but I was hoping for a workaround within iWeb) to create html links with support for protocols (aside from http and https) ??
It's bad enough I have to publish to a folder and then FTP to my site since apple makes that exceedingly difficult to do (I'm sure to increase .mac sales) but all this other foolishness is just bunk. I feel ripped off on my iLife '06 purchase.
Grrrrrrr......
G5 Dual 2.3 GHz Mac OS X (10.4.5)

I don't know if this helps you any, but in my humble
opinion Drake is absolutely correct. iWeb really
wasn't designed for the pro site builder; it's just
an entry level site builder. Moreover, it isn't
really geared for the professional world of internet
marketing; I think it is really more for the home
and family group who have at least one thing in
common: Macs.
I don't think it was even designed for them. I mean, you can't create an ftp: link, you can't manage multiple site files, there's no way to add "aim:" or "yahoo:" links, etc. It's not mac's they're supporting. It's .mac in particular, maybe, if that.
The art is kinda nice, but really, the grief in trying to do simple things like a basic href is just absurd. I can do these things easily in Pages. iWeb should certainly be no more difficult.
Btw, I'm here because I have the same problem - overly restrictive URL's on hyperlinks. I'll probably solve my with a trivial sed script. But even that's tough because they mangle the url. It's not easy to find an encoding suitable for automatic post processing.
Automator anyone?

On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.
My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
Appreciate suggestions.
[The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

Is your Yahoo account set up as POP3 or IMAP?

Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers of the appropriate version can be accessed from the Internet

Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??

Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Support for Seam, Facelets and RichFaces

Does OC4J provides support for Seam, Facelets and RichFaces?
Thanks,
Arun

OC4J is just a Java EE container so it should be able to run any Java EE libraries.
But maybe you should be asking this on the OC4J forum http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84

Support for Conexant chipsets and the HSF driver

Is it possible to add in kernel's PKGBUILD patch http://www.linuxant.com/alsa-driver/als … 19-3.patch for improving support for Conexant chipsets and the HSF driver?

You better file a bug report for it: http://bugs.archlinux.org/
Last edited by Nepherte (2009-04-24 10:06:17)

Support for SLES, Debian and CentOS

I'm planning to install Zenworks Endpoint Security Management and I would like to know if it would release a support for linux platform especially Debian and CentOS. We have a heterogenous network environment and there are servers that are running Debian and CentOS. Is it possible for ZESM to release a support for these operating systems? Also, would there be a release where ZESM could be installed in SLES?

Take a look at the new ZCM11 - currently in Beta1 - for SLES & Red Hat support and broader support DBs - Oracle and Sybase included.
http://www.novell.com/communities/no...agement-beta-1
Most of ZESM functionality is built into this new architecture. You'll also get integrated Linux Management on this build.
>>>
From: vindveif<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 5/31/2010 5:56 AM
Subject: support for SLES, Debian and CentOS
I'm planning to install Zenworks Endpoint Security Management and I
would like to know if it would release a support for linux platform
especially Debian and CentOS. We have a heterogenous network environment
and there are servers that are running Debian and CentOS. Is it possible
for ZESM to release a support for these operating systems? Also, would
there be a release where ZESM could be installed in SLES?
vindveif
vindveif's Profile: http://forums.novell.com/member.php?userid=33233
View this thread: http://forums.novell.com/showthread.php?t=411885

Http.get and http.post is now what under utl_http?

In previous source code sample(s), the statement http.get(url,response,content_type,proxyServer,proxyPort) doesn't exist in 9i. The sys.utl_http has get_Response but that doesn't take the same arguments. What is the utl_http call that would replace the http.get and http.post of 8i?

In short, POST requests are for sending any amount of data directly over the connection without changing the URL, and GET requests are for getting limited amounts of information appended to the URL.
POST requests cannot be bookmarked or emailed and do not change the Uniform Resource Locators (URL) of the response. GET requests can be bookmarked and emailed and add information to the URL of the response.

JDBC Thin Driver Support for Data Encryption and Integrity

Hello JDev Team,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
It works fine with java.sql.Connection and java.util.Properties like in the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
etc...
But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
sessionInfo1.publishSession();
My question is:
Is there any way to implement DataEncryption and Integrity into this type of connection?
Thanks a lot in advance.
Victor Bykov
null

Victor,
No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
Thanks
Blaise

Support for RAW Video and Image Sequences

Being a stills photographer who moved into video some years back, I'm very interested in the direction Lightroom is going with regards to video support. I haven't tried it yet but I wondered if LR4 supports Red R3D files? And would it perhaps support other future RAW video formats from the likes of Canon and Sony? It would seem like the perfect application, perhaps intergrating with Premiere in a similar way to RedCine with FCP. Be great to be able to log footage, orginize it into bins and do basic colour correction in LR, edit the project in Premiere and re-touch in After Effects.
Another task LR would seem ideally suited to is combining image sequences into timelapse video. Shooting timelapse as an image sequence on a DSLR is pretty much standard practice these days; and I've used LR to colour correct, crop and scale my sequences (before fitting them together in Quicktime) for years now. It would be fantastic to be able to preview the clip and export the video (as DPX, ProRes or DNxHD) from within Lightroom.
These are obviously fairly long term wishes. In the short term though, the video features are pretty much useless to me without support for exporting ProRes and DNxHD files. With this LR becomes a powerful asset manager that could be used to collect together footage from multiple sources/codecs and transcode it all for editing. As mentioned in a previous thred, XML support would make it even more useful in this context. There is definitly a gap in the market for an application than can handle this kind of task well.
With other manufactures floundering or neglecting their professional user base, Adobe would seem poised to take the video post crown. I wonder if Lightroom could be part of the takeover?

As I understand it Andy, its intention is to remain a photographers program, not a videographers program. The basic video features are available for lightweight management of videos coming from digital cameras, but it's not going too much further than that at this point in time. Of course that may change in the future, but we'll all have to wait and see on that one.

Why cant i download itunes on my windows 7 pc? i used to have it once but it was not updated for a while and got deleted...i have tried to download it on other web browser but all i got was "thanks for downloaing itunes" and nothing happened

why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Can anybody explain what is support for ADF Project and to solve the Issues

Hi,
I am new to ADF and i am currently associated to ADF Support Project.
Can anybody explain what is support for ADF Project and to solve the Issues when the ADF Project is in Live.
we are getting the Tickets for the Issues.
Thanks in advance.

I agree with Timo.
It depends on the size of the project, user base, technologies, etc. We use lot of technologies in fusion middleware stack. We get tickets in many areas.
In your case, it could be anything like user training issues (user may not know how to use the some system features), browser issues like blank screen, bugs in code like JBO errors (failed to validate, another user has changed row, failed to lock the record, NullPointerException, IllegalArgumentException etc), business logic issues, page may not render properly, performance issues, partial commit issues, application server issues, authentication issues. If you use web services you might get web services related problems.

Feature request: Support for {table abbr} and {table} in Table scripts

Hi Data Modeler Team,
support for {table abbr} and {table} in table scripts ("Table properties"->"Scripts"->All four tabs) would be greatly appreciated as it makes it easier to use boilerplate SQL in these areas.
Is it possible to add this feature to one of the upcoming releases?
Thank you,
Blama

Hi,
I've logged an enhancement request on this.
Thanks,
David

Downloaded Mountain Lion and lost support for Word, Excel, and PowerPoint.

Downloaded Mountain Lion and lost support for Word, Excel, and PowerPoint. Anyone know how to get it back?

Odds are you running Office 2004, which is coded in PowerPC code. PowerPC is no longer supported.
You either must upgrade the newer version of Office that will work or downgrade OS X.
Allan

Support for HTTP PUT and HTTP DELETE

Similar Messages

Maybe you are looking for