Support for JES Web Server?
How does access manager integrate with the jes web server? Do you have to install a policy agent like any other web server? Or is there more integration between the two products?
I'm having the same issue... How do you get the Web Policy agent to work with the webserver provided w/JES 2005Q1?
I downloaded the Agent for Web Server 6.1, and it wouldn't install... said that it required 6.0 or 6.1, and 6.1 is what is provided with JES, so I'm not sure why it didn't work.
Similar Messages
-
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINEError - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE -
Specification for the Web server
Hi All,
We have BW3.5.
Presently web server is running in the production box itself.
We are planning for a separate box for the Web server.
Please give me the tips for the hardware config for the Webserver.
Thanks
BillyHi,
1) Currently there is no WSRP or JSR support
but this will be soon "standard" for all portals!
2) Device detection is available. Mobile Access pack will
be available soon. (It is available now for portal 3.0)
Cheers,
Alex :-) -
Financial Reporting - PDF has not been configured for this web server.
When I try a Print Preview of my report, I received this error "PDF has not been configured for this web server".
As far as I know, this error is confusing because when I look on my log files I found this:
--- FRLogging.log ---
[APP: FINANCIALREPORTING#11.1.2.0] The system cannot access the Print Server at this time. Try again later or confirm the print server name.
[APP: FINANCIALREPORTING#11.1.2.0] Cannot connect to server on xxxHFRCE04.cf.gouv.qc.ca
[APP: FINANCIALREPORTING#11.1.2.0] Attempt to get an undefined configuration property
--- FRPrintLogging.log ---
HyperionReportException: Could not connect to the server.Please make sure that the server is running as specified in the logon dialog (including port number if not default).
I read a lot of document but it seem to be au communication issues!!!
Can someone help me with that.I believe the supported version for ghost script is 7.0.6; I had the same problem and after installing the lower version it worked like a charm.
If you cant find the older version let me know, I'll email it to you or place it in my website. -
Query on Support of IPLANET WEB SERVER
Hi
Kindly note that as in Download section I am not able to see the IPLANET WEB SERVER in WEB SERVER CATEGORY. As when i click on Sun One web Server in some of the location it shows that "formerly iplanet web server" As I have one doubt regarding that whether Now the support & Newer version for IPLANET WEB SERVER has been dropped from Sun ? If I want to download Iplane web server 6.0 from where I can get it ?At first it is iPlanet web server, then Sun ONE web server. Now it is called Sun Java System Web Server. 7.0 is the current version.
Check this web page for support related questions:
http://www.sun.com/software/products/web_srvr/lifecycle.xml
Download the last known release of Sun ONE web server 6.0 from:
http://www.sun.com/download/products.xml?id=43a84f89 -
PDF has not been configured for this web server linux 11.1.2
Hi,
We installed 11.1.2 Hyperion WorkforcePlanning on Linux 32 bit OS.
When the user opens the workspace and tries to see the "Profit and Loss" and selects
"File --> Open In --> PDF format" , it just flicks for a sec and gives following message :
" PDF has not been configured for this web server"
Can somebody suggest me what to do ?
Appreciate your response.
Edited by: user536857 on Mar 22, 2011 3:07 PMCheck your print server service on your foundation server, sometimes I have had that just stop for whatever reason.
-
End of Support for Netscape web browsers
Sorry if this has been here before and I missed it....
"We'll continue to release security patches for the current
version of
the browser, Netscape Navigator until February 1, 2008. After
February
1, there will be no more active product support for Navigator
9, or
any previous Netscape Navigator browser. This includes
Netscape
v1-v4.x, Netscape v6, Netscape v7 Suite, Netscape Browser v8,
and
Netscape Navigator/Messenger 9."
http://blog.netscape.com/2007/12/28/end-of-support-for-netscape-web-browsers/
~Malcolm N....
~What's Netscape? :)
Kind Regards
Paul Dell
An Eye of Menorca
www.dellimages.com
Blog
www.paul-dell.com
"Malcolm N_" <[email protected]> wrote in message
news:[email protected]..
>
> Sorry if this has been here before and I missed it....
>
> "We'll continue to release security patches for the
current version of
> the browser, Netscape Navigator until February 1, 2008.
After February
> 1, there will be no more active product support for
Navigator 9, or
> any previous Netscape Navigator browser. This includes
Netscape
> v1-v4.x, Netscape v6, Netscape v7 Suite, Netscape
Browser v8, and
> Netscape Navigator/Messenger 9."
>
>
>
http://blog.netscape.com/2007/12/28/end-of-support-for-netscape-web-browsers/
> --
>
> ~Malcolm N....
> ~ -
First, I didn't find a specific category in the forums for the Apache web server that comes with Oracle 8i and 9i, so if this isn't the right place, I'd like to know where it is.
Anyway, has anyone had success using NTLM with recent versions of Oracle's Apache web server? I had it working with 8.1.7, but when I upgraded to 8.1.7.3, it broke again. It doesn't work with 9.2 either. Oracle support was quite unimpressed that I had even tried it at all, but I think it is something that should be part of an intranet web server in a corporate environment, since Windows is on most desktops.
Thanks,
Andy JohnsonNT Lan Manager authentication for Apache? Are there even APIs published by Microsoft? On the other hand, I would not be surprised if a module exists. (then again Oracle would not support it for their variant of Apache=OHS)
-
Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- --- -
Is there any API for connecting web server and iphone apps
Hi,
I have to retrieve data from Web Server and display in my iphone apps. I want to know that is there any API through which i can connect my apps to server and get data.
One way i know that use NSURLConnection and get XML response and prase it and use it like that.
So anyone know this?
Thanks.NSURLConnection is straightforward to use. In the mobile world, and especially if you intend to use certain google APIs, I would rather tend to use JSON instead of XML. A great JSON parser for objective-c is here: http://code.google.com/p/json-framework/
Cheers,
Marcelo -
SUN JES Web Server 2005/04 6.1SP5 in a sparse zone on Solaris 10 ?
Can I run the web server inside a sparse zone ? Strictly speaking I would like to know that about every single one of the JES components but the Docs are quite miracoulous about that one ;)
- Web Server does run inside sparse zones.
check this out
http://docs.sun.com/app/docs/doc/819-2328/6n4khb8hi?a=view -
hi all,
i am new 2 the field of JSP & web servers.
i have installed apache web server on a unix box. i am invoking the jsp files from a win - 2000 machine.
i want to know if the apache web server can interprett the java code (JSP)that is embedded in html. if not what other web server should i use.
The jsp code is not being interpretted. the output for the foll code is:
HELLO WORLD
HELLO WORLD
<HTML>
<TITLE>
HELLO
</TITLE>
<BODY>
HELLO WORLD
<br>
<%= new java.util.Date() %>
HELLO WORLD
<% System.out.println("HELLO ALL") %>
</BODY>
</HTML>
Do i have to use some other server like Blazix or will apache web server do the job for me???
thanx in advanceDouble-posted:
http://forum.java.sun.com/thread.jsp?forum=45&thread=388900&tstart=0&trange=30 -
Are ERP Sales Orders supported for B2C Web Channel Scenario in CRM 7.0?
Hi Experts,
We are on CRM 7.0 with ECC 6.0 as backend system.
I just want to know whether the third party tax system (Vertex or Taxware) is mandatory for B2C WEB Channel implementation??
Without using a third party tax system, how can we configure tax for B2C web orders?
We have ERP sales order concept in 7.0. Will it support B2C scenario???
Regards,
vasuHi Ram,
-- Tax is configured in ECC using conditioni technique. They are not using any third party taxware/vertex system for this.
-- R/3 pricing procedure is intended to use for B2C transactions in Web channel and the pricing procedure refers to tax calculations. Even in B2c also they want to continue with the ECC pricing procedure.
-- The Requirement is to have pricing along with taxes and freight in the webshop, so that the consumers can pay the total amount using credit card as it is only the payment method available in the b2c Shop.
in the document "CAUSTAX_4.0" it was mentioned that use of third party system is mandatory for B2C scenarios. The relevant text is copied below.
As of CRM 3.1 and above, SAP provides a solution allowing you to use SAPu2019s jurisdictional tax method to calculate taxes.
Note: The use of external tax systems remains obligatory for B2C scenarios. However, if you are calculating tax in other scenarios and do not use external tax systems, this solution is applicable.
The solution consists of customizing changes in both R/3 and CRM. Even though you must make some changes in R/3, the basic process of calculating jurisdictional taxes remains the same. In CRM, the Transaction Tax Engine (TTE) calculates tax and you must configure it for the jurisdictional tax method.
My question is can we configure taxes in B2c shop using ECC pricing procedure? If yes, please provide the high level process steps.
thanks in advance
Srinivas
Edited by: Srini Sirasapalli on Jul 6, 2009 12:40 PM
Edited by: Srini Sirasapalli on Jul 6, 2009 12:42 PM -
How to find out version of patch for iPlanet Web Server 6.1 on Win2000
I have a iPlanet Web Server 6.1 SP1 running on Windows 2000. Can I find out what patches has been installed for my iPlanet Web Server?
Thanks in advance for any information.n/m, read version, not patches.
Edited by: David.Eriksson on Jun 30, 2008 8:12 AM -
Problem running WebLogic as plugin for SunOne web server on Solaris
I tried to set up WebLogic (8.1) as plugin for SunONE (iPlanet) web server. I followed instraction from http://e-docs.bea.com/wls/docs81/plugins/nsapi.html#110496. SunONE server start up successfully. But I have problem to connect my web application, and SunONE web server returns following error:
"for host 172.23.54.5 trying to GET /arsys/home, wl-proxy reports: Neither 'WebLogicCluster' nor 'WebLogicHost' specified in parameters"
I tried both SunOne (6.1 sp3) and iPlanet (6.0), I saw same problem.
Can anyone help me on this?
Thanks
CharlieTo configure sunone to work with WLS, you need to make entires in the magnus.conf and the obj.conf.From the error, it seems as if u missed the entries in the obj.conf.
Maybe you are looking for
-
Seriously messed up my macbook pro... I think.
Hello! I purchased a toshiba hybrid HD/SSD (MQ01ABD100H) and 8gb of ram from macsales.com. I purchased this to upgrade my macbook pro from 4gb of memory and 500gb hdd to a hybrid 1tb hd/ssd and 8gb of ram. I received these items in the mail today, an
-
I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?
-
I am creating an Automator Action to render PDF files as Images. When the PDF is multiple pages, the first page has no numbers, so it ends up at the end of the list. Here's an example: When it is a single page, the result is: filename.png When it i
-
Our ATV has been working perfectly until recently when we installed the 2.2 software. We no can no longer play movies we've rented or purchased (even though we had been able to do so). We can still watch trailers and tv shows. Apple support has been
-
Hello all, I use Flash CS4 with AS3. I have a problem with the site preloader. When I simulate the loading it is "invisible" for a while and then show up starting loading from ~ 24-27% or maybe ~55% To resolve this some people suggested me to crea