Support for Label-Only-Inferred LSP

Does the Cisco Service Provider IOS have the capability to support L-LSP. Need to find out if we can support more then 8 CoS using the E-LSP.
Is there any other mechanism for supporting more then 8 CoS on an MPLS backbone

At the moment L-LSP is not supported as far as I know. At the Networkers BOF session the developpers basically got the response from all the service providers present at the time that L-LSP feature is not high priority.
There are no "sexy" other options. What is the need to support more than 8 classes? I mean you can transport IP packets mithout touching the DSCP values through an MPLS backbone.
Last question: Do you really want to monitor and frequently fine tune more than 8 classes per interface?

Similar Messages

  • Support for Read Only EJBs ?

    Hi;
    I'm trying to discover if OC4J 9.0.3 provides support for Read Only Entity EJBs? If anyone can point me to docmentation on deployment descriptor elements controlling this, I'd be most grateful..
    Thanks in Advance;
    Simon

    Simon -- We do support read-only concurrency in OC4J. Have a look at the EJB Developer's Guide (available on OTN) for more information. It is in the section on locking modes.
    Thanks -- Jeff

  • TREX support for IDOCs only no PI involved

    I am aware of the TREX index support for PI XML content.
    What if only IDOCs are used. No PI.
    We09 is timing out. So we need a better index.
    Is Trex and option ?

    Hi Che,
    Please have a look at below blog
    Principal Propagation using SAP Assertion Ticket CRM -> PO7.31 Single Stack
    regards,
    Harish

  • For updating Silverlight in Windows, the System Requirements say I must have "X86 or x64 (64-bit mode support for IE only)"; what does this mean?

    I have a 5-year-old laptop, given to me by someone else as a gift, that uses: a 32-bit operating system, Windows 7 (with Service Pack 1), and Internet Explorer 8. A system message told me I need to upgrade Adobe and Silverlight. I accomplished the Adobe upgrade without problem. For the Silverlight upgrade, the instructions say to first uninstall the existing Silverlight software before installing the updated software. However, in the System Requirements, for Windows, it says the phrase that I quoted in the "Question" box above. I am not sure what it means. I am confused by the words "for IE only"; I'm assuming IE means Internet Explorer, but I don't know what this short phrase is trying to say. Is the "bottom line" that my 32-bit operating system is insufficient to receive the Silverlight upgrade, or is it enough? I need to know. I don't want to uninstall my existing Silverlight software yet, because of the possibility that I can't install the new software; I don't know what adverse effect would occur if my laptop doesn't have any Silverlight working on it at all. So I'd appreciate being filled in on this. Thanks!

    Your computer can run silverlight just fine. They are just saying that Silverlight is a 32bit application, except for Internet Explorer, where it can run as 64bit. It doesn't make any difference for you, so just go ahead and install it.

  • IOS support for MPLS QoS as stated in RFC 3270 L-LSP

    Hi,
    does anybody know something about the degree of implementation of RFC 3270 (Multi-Protocol Label Switching (MPLS) Support of Differentiated Services), particularly on the classification based on Labels (L-LSP)?
    From what is detailed on the CCO it seems that only Exp-bits based LSP are supported (configuring all links along the path for the proper data plane behaviour based on the Exp-bits values): E-LSP
    Thanx in advance
    Francesco

    I guess, in PPP and LAN environments, E-LSP is the preferred method and in the ATM only L-LSP is possible. Maybe cisco chose to implement only the E-LSP for the LAN and PPP environments, i am not sure though.
    Anyone knows this for sure?
    Check out http://www.cisco.com/warp/public/732/Tech/mpls/docs/mpls_qos_jayk.ppt for more details on MPLS-QoS

  • OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

    OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

    Hi there,
    If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
    There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
    Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
    I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
    I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
    Lion is fantastic, albeit maybe rushed.
    Any other queries, just ask,
    Nathan

  • Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

    Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

    Hi,
    FAN support along with all of the RAC support enhancements in Tuxedo 12.1.3 are licensed as part of the Exalogic Elastic Cloud Software which is included with Exalogic and SuperCluster systems.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Jwsc Error - Only HTTP ports are supported for JAX-WS

    Hi
    I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
    However when i try jwsc I get follwoing error
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    <----- follwowing task for generating java files --->
    <taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>     
    <target name="generate-from-wsdl">
              <wsdlc
                   srcWsdl="wsdl_files/UserPrefWebService.wsdl"
                   destJwsDir="web/web-inf/lib"
                   destImplDir="src"
                   packageName="com.ws.userpref"
                   type="JAXWS"/>
         </target>
    <----- follwowing task for generating class files ----THIS IS FAILING --->
         <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />      
         <target name="build-service">
              <jwsc srcdir="src" destdir="ear">
                   <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                        compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                        type="JAXWS"/>
              </jwsc>
         </target>
    <----- This is the Error --->
    C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
    Buildfile: build.xml
    build-service:
    [jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
    [jwsc] Parsing source files
    [jwsc] Parsing source files
    [jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
    erviceImpl
    [jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
    rpref\UserPrefWebServiceImpl.java 18:8
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
    BUILD FAILED
    C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
    e.tools.WsBuildException: JWS Validation failed.
    Total time: 10 seconds
    Does any one has any input on this error?
    Thanks
    Srikant

    Thanks David,
    Below is the wsdl
    <s0:message name="ws_getUserPreference">
    <s0:part element="s1:ws_getUserPreference" name="parameters"/>
    </s0:message>
    <s0:message name="ws_getUserPreferenceResponse">
    <s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
    </s0:message>
    <s0:portType name="UserPrefWebServicePort">
    <s0:operation name="ws_getUserPreference" parameterOrder="parameters">
    <s0:input message="s1:ws_getUserPreference"/>
    <s0:output message="s1:ws_getUserPreferenceResponse"/>
    </s0:operation>
    </s0:portType>
    <s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
    <s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <s0:operation name="ws_getUserPreference">
    <s2:operation soapAction="" style="document"/>
    <s0:input>
    <s2:body parts="parameters" use="literal"/>
    </s0:input>
    <s0:output>
    <s2:body parts="parameters" use="literal"/>
    </s0:output>
    </s0:operation>
    </s0:binding>
    <s0:service name="UserPrefWebService">
    <s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
    <s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
    </s0:port>
    </s0:service>
    </s0:definitions>
    do i need to add <wlhttptransport/> in jws during the buid?

  • I have never been able to open my itunes store.  I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes.  Can someone please help!

    I have never been able to open my itunes store.  I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes.  Can someone please help!
    I have tried
    -  setting time and date
    -  uninstalling
    -  upgrading itunes
    -  changing credit card
    Any other suggestions?

    Update your safari.  Install this:  http://support.apple.com/kb/dl1569
    The itunes store relies on certain components of safari, regardless of if you use it or not.

  • HT3825 Apple needs to add system support for Nikon D4 NEF Previews... currently only D800.

    Apple has added support for the Nikon D800 to 10.6 but not the Nikon D4?  OSX.6 needs to be updated to be able to view thumbnails and previews to raw files from the Nikon D4.  The only update that apple has released only affects iPhoto, not the system.

    AppleTV is Steve Job's hobby product?
    Perhaps AppleTV has increased sales on the iTunes store, but I wonder if the AppleTV itself has made any money for the company. For all we know, Apple may be losing money on every production and sale of the product, just like MS and Sony have for their consoles. I think the AppleTV is a great idea, but it is too limiting for it to be universally accepted. In fact, the AppleTV should be the universal player of set-top boxes. Apple, I guess, is not interested in the video server market.

  • Support for Single Labeled Domain

    Question - When will Microsoft stop supporting "Single Label Domains"?  Now with Windows Server 8 in the horizon, I would like to know if it will let you upgrade your current AD infrastructure if it is setup as a Single Label Domain.

    I'm sorry, but I truly don't know. The reason that I don't know, is I've never tested it or let an AD infrastructure remain as a single label name for this length of time. I've fixed a number of them in the distant past with renames. I'm not aware of anyone
    currently with a single label name until I saw this thread.
    From what I see, I don't really think so if it hasn't caused any issues up to this point.
    Besides, why do you want to bump the levels up? Is there something you are trying to introduce that requires the levels at 2008 R2? If it's DNS based, it may fail anyway due to the single label name, because the basis of the single label name is DNS *thinks*
    it's a TLD, such as "COM," "NET," etc. That's why it's problematic. DNS is hierarchal and requires a minimum of a two level domain name.
    So if you have a computer, called computer1, and your domain name is DOMAIN. Then the computer's FQDN is computer1.domain. But that looks like a domain name. Make sense?
    Anyway, I'm sure you've heard this and read that in my blog. I'm curious ... Will you be planning on renaming your domain?
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Does any one know of a property rental software to track rents and expenses for multiple properties that works on the IMAC?  Quicken Rental Property is only supported for Windows.  Any suggestions appreciated.

    Has any one found a comparable software for IMAC that could replace the Quicken for Rental Properties that is only supported for windows?

    And Google found
    http://property-management-software.findthebest.com/d/a/Mac-OS-X

  • How to force support for Long preamble only?

    how to force support for Long preamble only?
    Last edited by jackphil (2012-01-04 03:17:12)

    Hi,
    Thanks for your reply.
    I have downloaded the workspace containing the sample application from the address you provided. I have done the following changes to the application:
    1. Created AdcsResourceBundle_fo.java in the same package as AdcsResourceBundle.java
    2. Configured locale in faces-config.xml
    <locale-config>
          <default-locale>fo</default-locale>
          <supported-locale>fo</supported-locale>
        </locale-config>Indeed the messages are taken from AdcsResourceBundle_fo.java (I've tested the PanelCollection), but the problem with the number inputText is still there.
    Test scenario:
    Drag and drop DepartmentsView1 from Data Control to showDetailItem 1 in Table.jspx -> Create -> Forms -> ADF Form
    When the page is run, the 'Splash' image and 'Loading..' remains on the browser window and nothing else happens. And again, no messages in the server log.
    Is there anything else that needs to be configured?
    Anca

  • Enh. request: shortcuts support for button labels

    Hi Apex team,
    it would be nice to enhance shortcuts support for button labels in the next release. There are a lot of standard buttons like 'Cancel', 'Apply Changes', 'Delete', etc. that require translation for each page they appear in global applications.
    Thanks.

    Hi Arno,
    I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
    BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
    Regards
    Andy

  • Why no support for Nightblade Z97

    Dear Sir or Madam,
    I'm MSI Nightblade Z97 owner.
    Why there is no utility and BIOS support for Nightblade Z97 ?
    It has MSI Z97I Gaming AC mobo with Nightblade BIOS.
    I can't install and use utilities like MSI Command Center, because software does not support the motherboard. Probably due to Nightblade BIOS.
    The support tab on Nightblade Z97's page does not even contains any driver updates and only contains Dragon Fan utility, that is ridiculous.
    I wish it had the same BIOS with the MSI Z97I Gaming AC mobo, so i could get the latest BIOS updates and utilities.
    Sincerely.

    Not really expecting to get an answer to my question (Can I use the Gaming AC's BIOS for the Nightblade?) from the super users here so I e-mailed MSI support. Here's the response...
    Quote
    Dear Customer,
    We don't suggest the behaviour.
    The BIOS on our Nightblade webpage particular made for the barebone. We have specific code on the BIOS.
    I managed to install the latest BIOS (version 1.90) for the MSI Nightblade Z97 days ago without any problems. Still curious about the MSI Z97i Gaming BIOS so I tried installing it via a bootable flash drive. Unfortunately, the BIOS file cannot be installed as it's not even recognized. So you can only install a BIOS customized for the Nightblade even if the Nightblade motherboard itself is labeled as MSI Z97i Gaming motherboard.

Maybe you are looking for