Support for manager desktop

Anyone any idea how long SAP will continue including Managers Desktop in their ERP releases?
Ta
J

Do not confuse MDT and MSS....no where near the same. MDT is a reporting application within R/3(and ECC). While on the other hand, MSS encompasses several manager-specific services out-of-the-box including a reporting service that utilizes the MDT configuration. With MDT, you bascially set up various reporting "catalogs"...think of them as libraries/groupings of reports for your managers. Some of these "catalogs" may be exposed in MSS while others may only be accessible through the MDT transaction (PPMDT) within the SAP backend. With MDT configuration, it is very easy to build a reporting catalog/menu with R/3 reports, BW reports, Crystal reports, external links, etc. without having to do to much work. Then, via MSS, it simply "plugs into" the MDT config and can allow a user to very simply run reports over the web (ie. no need to set up iViews for each and every report for example). Make sense? Hope it helps clear up any confusion.

Similar Messages

Skiping initial selection criteria screen of HR report for Manager Desktop

Dear All,
The reports are configured using a custom scenario (Z Scenario) for Manager Desktop and used over the Portal through MSS. I have a requirement where for only one report (named Expired Qualifications) the initial selection criteria screen which comes when accessed through portal needs to be disabled or skipped and directly the transaction S_AHR_61015536 for this report needs to be called.
Please provide the inputs if it can be done and how for one report only.
Regards,
Samir

Dear Sen,
I have checked the thread suggested by you but the report here is not independent transaction integrated using iView. It is a part of Scenario which makes the reports available to the managers. It uses MSS Standard iView "Reports" and "Selection Criteria". Both iViews are in one page as delivered by SAP. The reports iView displays all the reports configured in the scenario for Manager Desktop and Selection Criteria iView is launched first in the portal content area when the report ( "Expired Qualifications") link is clicked from the Reports iView.
Regards,
Samir

Support for IE 9, 10

I’m trying to assess the browser situation with respect to Microsoft.
I need to provide input to my management about the browsers to be supported in future.
Came across some information on MS site which I’m pasting below.
What I’m trying to understand is that from Jan-12, 2016, will Internet Explorer 9 & 10 not be supported on Windows 7?
Pasted below is an extract from site:
“Beginning January 12, 2016, only the most current version of Internet Explorer available for a supported operating system will receive technical support and security updates.”
And the oldest they’ll support for Windows Desktop OS is IE9 on Vista SP2; for Windows 7 SP1 it’ll be IE11.
Their guideline:
Windows Platform
Internet Explorer Version
Windows Vista SP2
Internet Explorer 9
Windows Server 2008 SP2
Internet Explorer 9
Windows 7 SP1
Internet Explorer 11
Windows Server 2008 R2 SP1
Internet Explorer 11
Windows 8.1
Internet Explorer 11
Windows Server 2012
Internet Explorer 10
Windows Server 2012 R2
Internet Explorer 11

What I’m trying to understand is that from Jan-12, 2016, will Internet Explorer 9 & 10 not be supported on Windows 7?
Pasted below is an extract from site:
“Beginning January 12, 2016, only the most current version of Internet Explorer available for a supported operating system will receive technical support and security updates.”
Correct!
http://blogs.msdn.com/b/ie/archive/2014/08/07/stay-up-to-date-with-internet-explorer.aspx
(in the blog article, directly below the table which you've sampled, is a paragraph which exactly answers your question)
After January 12, 2016, only the most recent version of Internet Explorer available for a supported operating system will receive technical support and security updates.
For example, customers using Internet Explorer 8, Internet Explorer 9, or Internet Explorer 10 on Windows 7 SP1 should migrate to Internet Explorer 11 to continue receiving security updates and technical support. For more details regarding
support timelines on Windows and Windows Embedded, see the Microsoft Support Lifecycle site.
Also: http://support.microsoft.com/gp/Microsoft-Internet-Explorer
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Support for Blackberry?

Does anyone know whether OCFO 10 provides improved support for Blackberry Desktop Manager? The previous version only supported up to version 3.6 (without SP1 or SP2).
Thank you.

Hello,
The question is really one for RIM. So far, the Intellisync fixes have not been implemented in the Blackberry Desktop releases so you'll have to continue to run it against version 3.6.0 or earlier. The architecture changes to OCFO that will help circumvent this problem will not be available until mid-2006.
For over-the-air wireless synchronization, we have a number of great solutions for you. Through our partnership with Consilient, we can offer Blackberry-Oracle synchronization, and we'll soon be offering a push-IMAP solution for email that will work even better. You should talk to your Oracle Account Manager for more information about those solutions.
Hope that helps,
--Marc

Java support for file of large dimension

Hi friends,
Do you know if exist a support for managing file of large dimension (about 2GB) using java? BerkeleyDB could be a good support?
thanks

As Kaj mentioned before, using an NTFS partition, you should be able to write files of extreme sizes (for instance, an NTFS partition that is 200GB in size may store a single 200GB file).
Of course, using FileChannel objects, you shouldn't actually try and write the full 2+ GB of data at once, because that will effectively require over 2GB RAM for the data of your application alone. Instead, append your datafile one segment at a time (the size of the segment, in bytes, is roughly the amount of RAM you need for your data). Perhaps you can directly write the bytes into FileChannel (ie: when your measurements take place), which does not require a byte buffer.
Neither FileChannel nor File impose size restrictions beyond what the underlying operating system and type of partition impose. For example: a FAT32 partition can't deal with files over 4GB, so no language (Java, C++, whatever) will make it possible to store 4+ GB files on a FAT32 partition.
If you rewrite a portion of my [url http://forum.java.sun.com/thread.jsp?forum=31&thread=562837&start=15&range=15&hilite=false#2770450]sample from the thread "storing in Java", you should be able to write a 4GB file on your NTFS partition. Change the size of the byte buffer to 64MB and the amount of cycles to 64 and you're there.
I'm not sure how long it will take to write 64 chunks of 64MB, but don't expect it to finish in a few seconds. My regular IDE drive takes 2.25 seconds for a 60MB file (yet, my Serial-ATA drive does it in 1078ms, so don't forget that hardware has a significant impact on I/O performance as well).

When will StageVideo be available for AIR Desktop?

StageVideo is available (for some time now) in FlashPlayer,AIR Mobile and AIR TV. When can we expect StageVideo support for the Desktop. If it works well in Flash Player running on a browser, shouldn't be easier to get it working as a stand-alone app?

Wireless printing is available already in OSX.
Where is the printer you are trying to print to?
Is it on a network? Is it attached to a Mac? Are you sharing the printer? Is Bonjour enable?

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Using Desktop Manager for managing Evolution Mail-Accounts

hi there,
where can i find a documentation that describes how i can manage
evolution acocunts within Desktop Manager. I just can add an account name
but i can not define the account specific configuration data such as the
type of email server (in our case: M$ Exchange and SUN JES Server)
and based on the type of email server i must add some more or less configuration
information.
second question : can i use some variables for those configuration data such as
$USERNAME to configure the evolution email account using the correct username ?
the password has to be entered by the user if he/she runs evolution for the first time.
thanks in advance
cheers
joerg

Hi Joerg,
The documentation for the Desktop Manager focuses on the common parts of the operation of the product, the details of the meaning of each setting are more related to the application to which they belong, which is why they don't feature in the general administration manual. You can, however, find more contextual information about the various pages of the Desktop Manager by clicking on the "More" button present on each of these pages, for instance in the case of the Evolution accounts, this would have told you about the fact that the Accounts field is a list of strings containing the XML account description (though I'll grant you that in this particular case, it's a bit on the terse side).
As for the placeholders, you need to update your Sun Ray server with patch 120454 (120455 depending on your platform) revision 02, so that the GConf adapter which integrates Desktop Manager data into the Gnome configuration handles the placeholder properly. Then you have the possibility of using the special strings "[apoc.<attribute>]" in the configuration settings, which will be replaced when evaluated with the value of <attribute> in the LDAP user entry.
As an example (which you should adapt to the contents of your LDAP server and the actual definition you want to use for your Evolution accounts), you could for instance use the following XML blob for an Evolution account (I've formated it nicely for display purposes, you will want to paste as a single line into that Accounts list):
<?xml version="1.0"?>
<account name="[apoc.mail]" uid="[apoc.uid]" enabled="true">
     <identity>
         <name>[apoc.cn]</name>
         <addr-spec>[apoc.mail]</addr-spec>
         <reply-to></reply-to>
         <organization></organization>
         <signature auto="false" default="-1"/>
         </identity>
     <source save-passwd="false" keep-on-server="false" auto-check="true" auto-check-timeout="10"/>
     <transport save-passwd="false">
         <url>smtp://[apoc.givenname].[apoc.sn]@[apoc.mailhost]</url>
     </transport>
     <drafts-folder>file:///home/[apoc.uid]/evolution/local/Drafts</drafts-folder>
     <sent-folder>file:///home/[apoc.uid]/evolution/local/Sent</sent-folder>
     <auto-cc always="false">
         <recipients></recipients>
     </auto-cc>
     <auto-bcc always="false">
         <recipients></recipients>
     </auto-bcc>
     <pgp encrypt-to-self="false" always-trust="false" always-sign="false" no-imip-sign="false">
         <key-id></key-id>
     </pgp>
    <smime encrypt-to-self="false" always-sign="false"/>
</account>Now to go back to your problem with getting the profiles you've assigned with the Desktop Manager visible on the user's desktop, I can first offer a few remarks on your configuration:
- you've specified a DN and password for authentication to your LDAP server, I would like to point out that the agent (as opposed to the Desktop Manager itself) will only ever perform read accesses to your LDAP server (to find the user entry, figure out its position in the hierarchy and retrieve the applicable profiles), so you don't need to provide a user with write access, let alone administrative priviledges, as you seem to have done. If your LDAP server setup supports anonymous read access, I would advise you to leave these fields blank in the agent configuration;
- you've set the ChangeDetectInterval, DaemonChangeDetectInterval, TimeToLive and GarbageCollectionInterval to 1 (minute), which is unnecessary and for some of them probably detrimental to the performance of the agent operation. I can expand if you wish on the meaning of each of these (though I think that's described in the manuals), but I would advise you put back the default values for all of these settings, except maybe the ChangeDetectInterval while you're testing the product (this is the setting used to determine how often the user data is refreshed, i.e how often the changes from the Desktop Manager are propagated to the desktop applications, one minute is fine for testing purposes but you should put it back to its sixty minutes default once the profiles are fairly stable in order to minimise the activity of the agent).
Please first try and make the above changes to the agent configuration, and check whether the problem you're having is still present. If so, we can look into other potential causes for the problem.
Regards,
Cyrille

Support Package Manager for EBPCRM

Hi,
In CRM/EBP SAP systems there is used special 'Support Package Manager for EBPCRM' to implement Support Packages instead of standard transactions like SPAM/SAINT.
I'm trying to implement more then one Support Package into the system however this is probably not possible. It seems that it is not possible to create import queue with more then one Support Package? Importing SPs one by one is very time consuming task. SO that's why I'm wondering about this special tool.
Do you have similar functionality?
BR
m./

Hi Jose,
Yes I've put all the SPs into '\usr\sap\trans\Eps\in'. But 'Support Package Manager for EBPCRM' asks me for particular one while I'm going to import it. There is no such an functionality to use queue creation.
BTW: I'm on SAP CRM 4.0 on WIN/MSSQL platform.
BR
m./

Support for Software Configuration Management(SCM) Tools

Hi!,
I am using JDevloper for my project.
I want to maintain the versions of all files in the project.Also,if all are using one Workspace on network and someone updates a file then message box got dispalyed asking for reloading buffers again.
So to avoid this and maintain versions I want to use Software Configuration Management (SCM)Tools.So does JDeveloper supports for SCM tools?If yes kindly tell me how to use it?
Thanks
Amit
null

Hi,
The upcoming release of JDeveloper (3.2) has support for SCM. In this release, support has been integrated with Oracle's own SCM product, Oracle Repository. In future releases, other SCM products (e.g. CVS) will be supported.
When JDeveloper 3.2 is released (should be available at the end of Nov / start of Dec), the installation guide will have full details on how to install the Oracle Repository and use the SCM integration in JDeveloper.
In 3.1 or earlier, a custom addin exists for JDeveloper that can be used to support SCM systems (see JDeveloper documentation on OTN). However, this is not as tightly integrated as the new SCM support coming in 3.2.
Brian
JDeveloper SCM Team

I bought a mac companion for my desktop mac running os x but received the following error message when I tried to install the quikprotect software download: "power pc no longer supported." I did not read that anywhere when investigating. What gives?

I bought a mac companion for my desktop mac running os x but received the following error message when I tried to install the quikprotect software download: "power pc no longer supported." I did not read that anywhere when investigating. What gives?

PPC, also known as PowerPC has not existed on Macs since the beginning of 2006. Apple made a bridge software and included it with Mac OSes until 10.6.8 known as Rosetta that would allow you to run software written for the PowerPC Macs. 10.7 and later can't run that bridge software. You have one of several options:
Install 10.6 retail on a USB Flash drive, and run that application while booted from there.
Find an update designed for 10.7 or later of the software.
Find a combination of Virtualbox or Paralllels that can legally run a version of 10.6 side by side with your 10.7 software.
Run Windows on your Mac with Virtualbox or use CrossOver that requires no Windows to run a Windows version of your application.
Your Mac is an iMac Intel. I will ask a moderator redirect your thread to the 10.7 forum, and no action is needed on your part.

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

My Creative Cloud wont show the Apps, it says download Error contact support. And on the Home Menu on the creative cloud for MAC desktop it just loads and loads and never stops. Help please!!

My Creative Cloud wont show the Apps, it says download Error contact support. And on the Home Menu on the creative cloud for MAC desktop it just loads and loads and never stops. Help please!!

Hypesuh I would recommend reviewing both Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html and Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html as it appears both documents are applicable towards the difficulties which you are currently facing.

UsNIC support for UCSM managed C-series server

According to
http://www.cisco.com/en/US/docs/unified_computing/ucs/usnic/c/deployment/1_5_2/b_Cisco_usNIC_Deployment_Guide_For_Standalone_C-SeriesServers.html
usNIC is only supported for standalone c-series server, with VIC-1225 and RHEL
Any plans to support this for UCSM managed c-series (connected with FEX to FI), and additional OS, e.g. W2012 R2 ?

Hello Walter,
usNIC dev team actively write blogs under HPC and you might get better response for your questions / comments to those posts :-)
http://blogs.cisco.com/performance/ultra-low-latency-ethernet-questions-and-answers/
http://blogs.cisco.com/performance/
HTH
Padma

I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.

I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.

Are you referencing your Photoshop image files, or Photoshop application files?
If the latter, cease and desist at once!
Always install Photoshop from scratch, from the original media: CD/DVD or download.
If the former, please provide details:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Support for manager desktop

Similar Messages

Maybe you are looking for