Support for multiple source directories

Does JDeveloper support multiple source directories? Whenever I use the class wizard, it always creates the file in the src folder. For unit test cases, I would like the source files to be in test folder.

Re: Multiple Source Folders?

Similar Messages

Support for multiple email addresses in struts

Hi,
I need an example source jsp in struts which contains support for multiple email addresses (dynamic)
Can I have source for this?
Thanks

I'm sorry, I don't understand what you mean - do you want to display multiple email addresses on a page?

Feature request: Support for Multiple Libraries (like in iMovie)

From the threads, I can tell this topic was raised by many for many years. I would like to propose support for multiple iPhoto libraries -- or more specifically, the ability to distribute media across different storage devices.
There is a huge gap between my spacially limited MBP 250 GB SSD and my external 4 TB HDD. I am aware that I can juggle two separate libraries in iPhoto but it's just not practical and the moving of media between the libraries is not a simple drag and drop effort but involves exporting and importing with me having to clean up on one side or the other.
iMovie has had support for several libraries for a long time presumably because the sheer size of media in the video realm gave the iMovie team little choice.
I can't be the only one having this itch, right?

Again, you need to clarify your terms
Aperture can move master photos files around. With Aperture you can write additional metadata to the original file.
You don't need multiple libraries to thematically arrange photos, though. A simple keywordign system will do that.
So in Aperture I don't have to restart into different libraries?
You can have all your photos in a sinble library with the master files stored off-disk easily. You can relocate them from disk to disk too. However, if you;re doing presentations that is probably not necessary if you generate good quality previews. I'd ask about these things on the Aperture forum for more.

Support for multiple libraries...?

Hi, I have a question as how is the best way to manage y music libraries given my usage scenario.
First let me set the context of what I have. I have over 35GB of ripped music, that resides in an external drive. Currently this music is available through my iTunes application, but it is NOT part of my lybrary (meaning I imported but did NOT copy it into the library). I do NOT want to have 35GB of music in my notebook's HD.
My iTunes library is in my local HD (music folder). This is a small file that basically has the 'podcasts' and the 'artwork'.
What do I want? I would love to keep all my music and videos on the external drive, and have my podcasts in my local HD. This way when I am on the road, I can update the podcasts, without having to carry with me all my music.
This all works fine the way I have it now, except that every time I rip a new CD or buy music from the iTunes Store, they go to my local HD and not my external drive.
Any ideas on how to work this out? I would love support for multiple libraries, but I don't thnks it's possible as far as I looked into it.
Thanks SO much!

This all works fine the way I have it now, except that every time I rip a new CD or buy music from the iTunes Store, they go to my local HD and not my external drive.
Set the 'iTunes Music folder location' (Preferences>Advanced>General) to the music folder on your external.
The next time you rip a CD or purchase music, it will be stored there.
Note: the 'iTunes Music folder location' is not the folder where your music is, but the location where iTunes stores imported music (and added music when 'Copy files to.....' is checked)
If you ran iTunes once with your external drive not attached/mounted, this location is reset to the internal drive.
iTunes 7 has support for multiple libraries. Press and hold the Option-key on launching iTunes until a window pops up which asks you to choose a library or create a new one.
Libra and iTunes Library Manager both work with iTunes 7 and older versions. They also save the preferences for every library you created.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

[svn] 4875: Adding support for multiple @productversion tags

Revision: 4875
Author: [email protected]
Date: 2009-02-06 08:31:48 -0800 (Fri, 06 Feb 2009)
Log Message:
Adding support for multiple @productversion tags
QE Notes: None.
Doc Notes: None
Bugs: SDK-19104
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19104
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java

Revision: 4875
Author: [email protected]
Date: 2009-02-06 08:31:48 -0800 (Fri, 06 Feb 2009)
Log Message:
Adding support for multiple @productversion tags
QE Notes: None.
Doc Notes: None
Bugs: SDK-19104
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19104
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java

[svn] 4146: adding support for multiple @playerversion tags.

Revision: 4146
Author: [email protected]
Date: 2008-11-19 21:37:23 -0800 (Wed, 19 Nov 2008)
Log Message:
adding support for multiple @playerversion tags.
Fix for asdoc.exe not outputting information for the @langversion tag.
Also removing some unused code from DITA generation..
QE Notes: None
Doc Notes: None
Bugs: SDK-18158, SDK-18159
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18158
http://bugs.adobe.com/jira/browse/SDK-18159
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 4146
Author: [email protected]
Date: 2008-11-19 21:37:23 -0800 (Wed, 19 Nov 2008)
Log Message:
adding support for multiple @playerversion tags.
Fix for asdoc.exe not outputting information for the @langversion tag.
Also removing some unused code from DITA generation..
QE Notes: None
Doc Notes: None
Bugs: SDK-18158, SDK-18159
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18158
http://bugs.adobe.com/jira/browse/SDK-18159
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Mailman v3 implementation of support for multiple domains

Mailman has evolved to support listserve names for multiple domains (think VH for listserves). At what point can we see Apple roll this kind of management into the existing product? It would be fabulous to give VH clients the ability to have their own 'branded' listserve experience rather than one with our default domains
Server Group -- please update Mailman when more pressing bug fixes are out of your way. Thank you!

Alex,
Thanks. I know that it can be done via the CLI, but once again we see where alterations done in the CLI will immediately require abandoning the SA as an admin tool. We're trying to encourage Apple to not create this paradox, or rather, to evolve the GUI admin toolset. I was recently at a Leopard Server tour seminar where the field engineer and I discussed this very feature. His comment to me was essentially 'many of the tools in the Server are based on open source projects, so you can simply download the latest update, compile it and configure it for the server ... but you won't be able to use the admin tools we provide." He's accurate, and if I was the only one admin'ing my machines, that might be a temporary solution to this particular small issue. But it immediately brings to mind the reflex question of 'so why did I buy Leopard server?
This is a matter of Apple needing to provide sufficient resources to the Server group to grow the product. Whether that means some new hiring, or not pulling engineers off for other product lines, or a different management paradigm. We shouldn't purchase a server product that is touted as an enterprise-class solution when it may only have a bare framework for the offered toolsets. If growing the toolset to match what is already offered in the open source world (for that particular product) requires abandoning the server tools, then there's a bit of a vision problem with the Server product.
Sorry, -- I didn't mean to get on a soap box. You and I are here to learn and help others. I know you aren't part of Apple any more than I am. I do hope Apple engineers are given some time to peruse this board and mine it for ideas, or gauge the effectiveness of their solutions based on the questions and solutions posed here.
With Mailman 3 so far along in development (VH support was added in October), is Apple culling the very best from it for their user base (and adjusting the SA toolset accordingly)?

Support for Multiple Hierarchies defined for the same GL Segment

Hi,
In our eBS setup, we have multiple hierarchies defined for a GL Segment.
OOTB, BI Apps 7.9.6.3 provides support for 10 Segments, and it's corresponding Hierarchies (1 Hierarchy for each Segment).
My question here is whether OOTB BI Apps 7.9.6.3 supports Multiple Hierarchies for the same Segment?+
Thanks,
Ab

no it is not supported OOTB as of today
you need to customize ETL mappings and OBIEE metadata to include hierarchy identifiers from the EBS segment definitions.
Then you have to consider that filtering a hierarchy identifier becomes mandatory during query execution to avoid aggregation of duplicated values.

Multiple source directories to multiple target directories

Hi All,
I have a file to file scenario like this.....
source:
\folder1\source1.xml
\folder2\source2.xml
\folder3\source3.xml
target:
\test1\source1.xml
\test2\source2.xml
\test3\source3.xml
The files from diffarent folders should be copied corresponding target directories with same file name.
for example,
source1.xml from the source directory folder1 should be copied to target directory test1 with the file name source1.xml.
here the target path depends on source directory.
so we need to know the source path to decide the target path.
please help me to solve this..

Hi,
If you have lots of similar scenarios in your project you can opt for a Managed file transfer , i think using tools like RMFT you can manage the direct file transfer scenarios well and also reduce the pain of XI server.
refer the link below.
http://www.repliweb.com/solutions/web-user-file-transfer.php
As its obvious from the comments ...I assume that you have 1 source FTP with different folders to pick files from and files are getting transfered to single FTP but different folders.
if you deceid to write a module then .. refer this link which gives a good insight to module development .
/people/rinku.gangwani/blog/2008/07/16/customized-adapter-module
Again if you want to write a UDF you may need to have a mapping program..
Do you have same structure for all source files.?
Regards,
srinivas
Edited by: Srinivas on Mar 23, 2010 12:28 AM

SCUP 2011 support for multiple SCUP console users

Will Microsoft or does microsoft have a solution to allow for multiple users to upload catalogs and install and use the SCUP 2011 console on workstations? Will SCUP 2011 database support multiple users now or in the future and is it supported? thank you

I cannot speak to what may lie in the future, but this is what we do to have multiple users in the console. We are just now starting to evaluate SCUP, and this works for a handful of users so far.
Install WSUS admin console
Install SCUP 2011
Copy Scup2011.exe.config to
c:\Program Files (x86)\System Center Updates Publisher 2011
Open SCUP console and verify in File-> Options that ConfigMgr Server settings are correct
Verify Advanced settings are correct as well
Daniel Ratliff | http://www.PotentEngineer.com

Still no support for multiple users!!

The only reason I recently updated to 5.0 is I was anxiously awaiting the addition of multi-user support to my Lenovo A10-70 tablet. I had bought it for my young daughter after she broke the screen on her Nexus. Well, without support for User Accounts, this tablet is useless to a parent. I cannot believe a large company like Lenovo does not offer this with its Android tablets! Mark, Cleo, Serene, Lenovo admins - I hope you are reading this. I am also posting this on Amazon where I bought my tablet. Such a shame - great hardware but such poor software choices. P.S. Major issues with the new update to Android 5.0. WiFi does not stay connected. Many Google apps will not run, including Gmail!

Multi-user support is not common in tablets - so far, the ONLY tablet I have found with solid multi-user support is the Galaxy Tab/Note 4 (and even it has issues if you mis-configure it). (Why do I refer to the Tab/Note 4? Yes - the Note 4 is a phablet, and is typically sold via providers AND has a taller resolution than the Tab 4; those are, in fact, the ONLY differences between the Tab 4 and Note 4. They have common features otherwise, and even their updates are released simultaneously.) Lenovo even did the same thing with the A-series - compare their phablet models (G, GV, and H) with their wireless-only F models - you'll find so many commonalities it's not funny. It's the phablets that are getting all the update love (especially when it comes to Lollipop); tablets (F subseries), not so much.Also, phablets are huge in Asia and India (look at sales of the G, GV, and H - the forums HERE are also rather obvious in those reporting successful updates - they are all from Asia or India); Lenovo doesn't push phablets in Europe or North America. (I have no idea whether it is provider resistance or not.) If you want solid multi-user support as a parent, look to Samsung (simply because they actually implemented it properly, which most tablet OEMs aren't going to be bothered with - it's not a knock specifically on Lenovo, because it's not specifically a Lenovo issue). On the Lollipop update issue; how many of us are still soldiering on with the same amount of storage that our tablets came with? (I'm referring mainly to us F-subseries folks.) The thing about the F subseries is that they all have small - if not downright miniscule - amounts of usable eMMC storage; out of the 8GB of eMMC storage the device has, only half that - 4GB - is usable from the start. And every app you install, and assorted things that go along with it, eats into that. Look at the size of the UPDATES that are being reported; S000023 alone is nearly 200MB. The big combo updates - and if you're coming merely from S000020, which is the North American starting place for the F - you're talking nearly a gigabyte just to get to S000027 - do you have that much usable storage? We may well have to bite the bullet and install medium or large (16GB/32GB) microSD cards in our tablets just because of the update-size issue. (It's not like 16GB microSD cards are all that expensive, even retail - I see them at the local Best Buy for - at worst - $15 for SanDIsk Ultra - that's the high end brand of microSD card.) We may be getting those "you have the latest version" due to available-space constraints - I've seen it happen on space-coinstrained WINDOWS PCs often enough.

SOURCE ATTACHMENT for multiple source paths

I have a flex app project with the name AppProj.
I also have a flex library with the name LibProj. It has no SRC folder of its own. It has 3 external folders as source paths ...
C:\folder\codeFolder1\
C:\folder\codeFolder2\
C:\folder\codeFolder3\
The Main Source Folder is C:\folder\codeFolder1\
The AppProj adds the LibProj in the Flex Library Build Path. I check the Source Attachment of the LibProj and it is pointing to C:\folder\codeFolder1\ which is LibProj's Main Source Path.
Now if I hit F3 or CTRL+CLICK on a class that is in the C:\folder\codeFolder2\ or C:\folder\codeFolder3\ folder, I get the source not found in the swc error.
How can I specify multiple source attachment or how do I solve this problem.
Thanks

In textLayout_build.zip is the source code. http://sourceforge.net/projects/tlf.adobe/files/3.0/current/textLayout_build.zip/download
All versions of the source code contain CONFIG statements, including the internal ones.

Adding support for multiple languages

Hi all,
I've a desktop application with multiple components in it containing .rc files.Now, I'd want to replicate these .rc files in such a way that I should be able to build and generate a localized build from my source.
To explain more, as of now my release configuration would generate an English language build. Now, I'd want to do the same for all languages. Is there any tutorial on how to achieve this?
For now, I'm thinking to add multiple build configurations and let different components point to specific resource directories.
Lets say I have a folder res_english -> this will contain all english resources, res_japanese would contain all japan resources, like this I should have multiple folder each containing specific resources. CAn someone guide how to do this?
Thanks!

See
here.

Support for multiple pdf document with signature

I have a question about signatures.
Does the PDF specification support the combination of multiple pdf documents into one pdf document with the following constraint:
- each individual pdf document has been signed (by an X.509 certificate),
- the individual documents can come from different sources, so they have to be 'included' or merged into the final pdf,
- the final pdf document should not change the signatures of the individual documents.
So each part of the document should maintain the integrity of the individual components and the signature of the individual comnponents are still valid.
Does the pdf specification support this feature?
With kind regards,
Ernst Jan

What you want is called a PDF Package (or Portable Collection in the PDFRef) and is new in PDF 1.7. You can try it out with Acrobat 8.
Leonard

Retrive files from multiple source directories

Hi,
I need to retrive diffirent formet files from multiple directories and based on file name I need to send it to destination folders. Can anybody suggest me How can I impliment this interface.
Thanks & Regards
VenkatK

Venkat,
I hope since you are taking different format files, you are not doing any mapping. You are moving from one location to another location, because if you different formats then you can do in one mapping your requirement.
If it is correct then as shabharish mentioned you can pick the files using multiple file sender adapters. With this you can pick the files, but to send to different directories enable ASMA in sender file commkunication channel. Then in receiver communication check the extension for each format and then give the directory name so that it routes to the destination you mentioned.
Regards,
---Satish

Support for multiple source directories

Similar Messages

Maybe you are looking for