Support for Network Devices

Hi All,
 I am working on the network evaluation for a client environment and was looking for using Prime Infra as a solution for Network management. I see that following devices are not listed in the support matrix. Can someone help me to understand if this can be monitored and managed in cisco prime Infra 2 ?
Cisco 2248
cisco 4948
cisco 4300
cisco 3745
cisco ASA FWSM
Cisco WS-C4948
Cisco C3550-48
Cicso C3550-24
Cisco C4006
Cisco WS- CBS3020-HPQ
Cisco WS-CBS3120X-S
Cisco WSX 5302
Skr...

What version of ISE are you on? There isnt a maximum number of network devices listed anywhere but I am sure that exceeding 500 is no where near the threshold. What has worked for me in the past is adding one device manually and exporting that device using the csv method and use that csv to add the other devices ip address and copy and paste the same columns.
It could be something as simple as missing a field where the UI isnt catching or an undocumented issue that are hitting.
Thanks,
Tarik Admani

Similar Messages

  • AAA authentication for networking devices using ACS 4.1 SE

    Hi!!!
    I want to perform AAA authentication for networking devices using ACS 4.1 SE.
    I do have Cisco 4500, 6500,2960, 3750, 3560, ASA, CSMARS, routers (2821) etc in my network. I want to have radius based authentication for the same.
    I want telnet, ssh has,console attempt to be verified by radius server & if ACS goes down then it will be via local enable passwordf.
    For all users i need to have different privilege levels based upon which access will be granted.
    could u plz send me the config that is required to be done in the active devices as well as ACS!!!!

    Pradeep,
    Are you planning MAC authentication for some users while using EAP for others?
    For MAC authentication, just use the following in your AP.
    aaa authentication login mac_methods group radius
    In your AP, select the radius server for mac authentication. You must have already defined your ACS as a radius server.
    In your SSID configuration, under client authentication settings,
    check "open authentication" and also select "MAC Authentication" from the drop-down list.
    If you want both MAC or EAP, then select "MAC Authentication or EAP" from the dropdown.
    Define the mac address as the username and password in ACS. Make sure the format of the mac is without any spaces.
    You will not need to change anything in XP.
    NOTE: XP normally does not require user authentication if machine has already authenticated but it might behave differently. If it does, I can let you know the registry settings to force the behaviour change.
    HTH

  • [svn] 3219: Checking in support for Network Monitor in rpc.swc

    Revision: 3219
    Author: [email protected]
    Date: 2008-09-16 01:33:39 -0700 (Tue, 16 Sep 2008)
    Log Message:
    Checking in support for Network Monitor in rpc.swc
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/DirectHTTPChannel.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractInvoker.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractOperation.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/AbstractOperation.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPService.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/Operation.as
    Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/NetworkMonitor.as

    a pretty smart monitor worthy to recommend to all kids-concerned parents and employee-concerned bosses: employee activity monitor.
    Learn morefrom here:
    www.employee-activity-monitor.com

  • Support for Mobile Device?

    Do you foresee adding support for setting up mobile device projects (Android etc ...).
    This would be great to help with any external - device specific - files required.

    GREAT!
    Anything you can do to keep the developer writing MXML and AS3 is good.
    Shield them from all the platform specific complexities.
    Looking forward to it.

  • Will Verizon offer any thing to iPhone 4 users since Apple will stop releasing update and support for the device?

    Apple recent stated they will no longer offer any support for the iPhone 4, no more updates, apps will stop working with the advancement of software updates. over all by the end of the year the phone will be almost completely phased out. Does Verizon have any type of plan for their current iphone 4 device users?

    Verizon has nothing to do with Apple updates.
    It is much like Microsoft who phased out support updates to Win 31, Windows 95,98,ME and now Windows XP.
    You must deal with Apple http://www.apple.com/support
    Good Luck

  • Support for iOS devices

    I would like support for backup of my iOS devices in my TimeMachine.
    I would love the same functions I have for OSX to be available to my iPad & iPhone or att least single full backup over wi-fi.
    Am I the only one that finds the lack of this functionality kind of weird?

    iOS devices back up to iTunes on a computer....or....to iCloud.
    It is not possible to backup an iOS device directly using Time Machine, but if you backup your iOS device to a Mac, and then use Time Machine to back up the Mac, the backups of the IOS devices in iTunes are backed up using Time Machine.
    So, you could say that Time Machine will indirectly back up an IOS device.
    For more information on iOS backups, please see this Apple support document:
    http://support.apple.com/kb/ht1766

  • Menu Model support for Telnet devices

    Hello,
    I'm trying to develop a telnet screen that includes a Menu part. I imported the ADF components as expalined in Reference Document and got such a code:
    <af:page title="Index" var="var" value="#{menuModel.model}">
    <f:facet name="nodeStamp">
    <af:commandMenuItem text="#{var.label}" action="#{var.getOutcome}"/>
    </f:facet>
    </af:page>
    This code snippet works fine in the html browsers but in the telnet screens, there is nothing except the title "Index" field.
    I also tried to build the same menu hierarchy with the af:panelpage component and the af:menuXXX attributes but the result didn't change. I tested the screens in different emulators.
    In reference documents, I read this sentence "the entire hierarchy is presented in a popup in telnet". Are ADF menu components supported by telnet devices or not? I need someones help who used menu model for telnet devices.
    Thanks for your interest...

    Erhan,
    The menu appears in a popup when the user presses the "Menu" key. This key is specified in the device configuration in appConfig.xml; by default, it is control-n.

  • Data desccription for Network devices

    Hi,
    We have a scenario where two IP's having a single host name. In SCOM the two IP addresses have been discovered under a single host name
    E.g
    abc.domain.com
    abc.domain.com
    When i click the properties i could see that these are two different IP's. We have created SNMP monitors for these devices and when they alert the alert descriptions looks confusing as they show the same host name for both the IP addresses. Tried to bing
    but could not find much help.
    http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx 
    But these do not mention on how to pull out the IP addresses in alert description. We have currently used the below syntax but still get the host name rather than the IP.
    $Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary6172210!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$  
    Please advise.
    Jesty Sam

    Hi!
    You could create an "override" for the alert name or alert description. More here:
    http://blogs.msdn.com/b/mariussutara/archive/2008/07/15/monitor-from-sealed-mp-generated-alert-and-i-do-not-like-its-description.aspx
    HTH,
    Patrick
    Please remember to click “Mark as Answer” on the post that helped you.
    Patrick Seidl (System Center and Private Cloud)
    Website: http://www.syliance.com
    Blog: http://www.systemcenterrocks.com

  • Where is the Sony XZ1S C6916 support page?!?! Has Sony stopped support for this device?

    Hello community,
    Im new to sony community so please take it easy on me. I was able to access support information from sonys own xperia z1s support page. But as of last night, that page is no longer existent and any searches for C6916 redirect me to the Z1 support page with no information on Z1S. Has sony stopped supporting this device?

    I wouldn't like to say as the Z1s is a T-mobile specific locked phone and may have security features in place to only allow network signals via their firmware
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Nokia Maps/ N95: Support for network links?

    Hello,
    I have a GPS tracker device I would like to monitor in Nokia N95's maps. On PC I am using Google Maps with a network link, to see it's position in real time.
    Does Nokia Maps support network links like in Google Earth?
    Feel free to try - here's a sample URL from TrackingTheWorld:
    http://trackingtheworld.com.r.seekdotnet.com/images/260156.kml
    It should look something like this:
    http://trackingtheworld.com.r.seekdotnet.com/Gmap.aspx?name=260156
    Bjørn Tore

    The beta has been out for your phone for a while now and licenses from previous versions do work with the beta. 
    You need to ask about availability of the final product on the maps 3 beta forum.  You will most likely will not get an official answer here.
    http://betalabs.nokia.com/forums/nokia-maps-30-with-ovi-maps 

  • Dreamweaver CS6 PhoneGap build with Camera support for Android Device

    I am trying to build a simple app that triggers the camera in my Samsung N7000 device.
    I have built the app using Dreamweaver CS6 using the builting phonegap build support.
    I am using the Windows version of Dreamweaver CS6.
    When the app is built it shows no errors but when the app is installed on the device it does not trigger  the camera.
    I can not seem to get this very basic app to trigger the camera.
    Any suggestions will be very much appreciated.
    //=======================================================================
    Below is the index.html file i have been using.
        <script src="phonegap.js"></script>
        <script type="text/javascript" charset="utf-8">
            // Called when capture operation is finished
            function captureSuccess(mediaFiles) {
                //var i, len;
                //for (i = 0, len = mediaFiles.length; i < len; i += 1) {
                //    //uploadFile(mediaFiles[i]);
                //navigator.notification.alert('Weee', null, 'Great success!');
            // Called if something bad happens.
            function captureError(error) {
                //var msg = 'An error occurred during capture: ' + error.code;
                //navigator.notification.alert(msg, null, 'Uh oh!');
            // A button will call this function
            function captureImage() {
                // Launch device camera application,
                // allowing user to capture up to 2 images
                navigator.device.capture.captureImage(captureSuccess, captureError, { limit: 2 });
            // Upload files to server
            function uploadFile(mediaFile) {
                var ft = new FileTransfer(),
                    path = mediaFile.fullPath,
                    name = mediaFile.name;
                ft.upload(path,
                    "http://my.domain.com/upload.php",
                    function (result) {
                        console.log('Upload success: ' + result.responseCode);
                        console.log(result.bytesSent + ' bytes sent');
                    function (error) {
                        console.log('Error uploading file ' + path + ': ' + error.code);
                    { fileName: name });
        </script>
        <script type="text/javascript" charset="utf-8">
            var pictureSource;   // picture source
            var destinationType; // sets the format of returned value
            // Wait for Cordova to connect with the device
            function onLoad() { document.addEventListener("deviceready", onDeviceReady, false); }
            // Cordova is ready to be used!
            function onDeviceReady() {
                pictureSource = navigator.camera.PictureSourceType;
                destinationType = navigator.camera.DestinationType;
                alert("device is ready");
            // Called when a photo is successfully retrieved
            function onPhotoDataSuccess(imageData) {
                // Uncomment to view the base64 encoded image data
                // console.log(imageData);
                // Get image handle
                var smallImage = document.getElementById('smallImage');
                // Unhide image elements
                smallImage.style.display = 'block';
                // Show the captured photo
                // The inline CSS rules are used to resize the image
                smallImage.src = "data:image/jpeg;base64," + imageData;
            // Called when a photo is successfully retrieved
            function onPhotoURISuccess(imageURI) {
                // Uncomment to view the image file URI
                // console.log(imageURI);
                // Get image handle
                var largeImage = document.getElementById('largeImage');
                // Unhide image elements
                largeImage.style.display = 'block';
                // Show the captured photo
                // The inline CSS rules are used to resize the image
                largeImage.src = imageURI;
            // A button will call this function
            function capturePhoto() {
                // Take picture using device camera and retrieve image as base64-encoded string
                navigator.camera.getPicture(onPhotoDataSuccess, onFail, {
                    quality: 50,
                    destinationType: destinationType.DATA_URL
            // A button will call this function
            function capturePhotoEdit() {
                // Take picture using device camera, allow edit, and retrieve image as base64-encoded string 
                navigator.camera.getPicture(onPhotoDataSuccess, onFail, {
                    quality: 20, allowEdit: true,
                    destinationType: destinationType.DATA_URL
            // A button will call this function
            function getPhoto(source) {
                // Retrieve image file location from specified source
                navigator.camera.getPicture(onPhotoURISuccess, onFail, {
                    quality: 50,
                    destinationType: destinationType.FILE_URI,
                    sourceType: source
            // Called if something bad happens.
            function onFail(message) {
                alert('Failed because: ' + message);
        </script>
    </head>
    <body onLoad="onLoad()">
        <button onclick="capturePhoto();">Capture Photo</button> <br><br>
        <button onclick="capturePhotoEdit();">Capture Editable Photo</button> <br><br>
        <button onclick="getPhoto(pictureSource.PHOTOLIBRARY);">From Photo Library</button><br><br>
        <button onclick="getPhoto(pictureSource.SAVEDPHOTOALBUM);">From Photo Album</button><br><br>
        <img style="display:none;width:60px;height:60px;" id="smallImage" src="" />
        <img style="display:none;" id="largeImage" src="" />
        <br><button onclick="captureImage();">Capture Image</button> <br>
    //=======================================================================================
    Below is the config.xml file i am using
    <?xml version="1.0" encoding="UTF-8" ?>
        <widget xmlns   = "http://www.w3.org/ns/widgets"
            xmlns:gap   = "http://phonegap.com/ns/1.0"
            id          = "com.phonegap.camera_test"
            versionCode = "11"
            version     = "1.1.0" >
    <name>bla</name>
    <description>
        bla
    </description>
    <author href="http://bla.github.com"
        email="[email protected]">
        bla
    </author>
    <icon src="icon.png" gap:role="default" />
    <feature name="http://api.phonegap.com/1.0/geolocation"/>
    <feature name="http://api.phonegap.com/1.0/network"/>
      <feature name="http://api.phonegap.com/1.0/file"/>
      <feature name="http://api.phonegap.com/1.0/camera"/>
      <feature name="http://api.phonegap.com/1.0/media"/>
      <feature name="http://api.phonegap.com/1.0/device"/>
      <feature name="http://api.phonegap.com/1.0/notification"/>
      <feature name="http://api.phonegap.com/1.0/battery"/>
    <preference name="orientation" value="portrait" />
    <preference name="webviewbounce" value="false" />
    <preference name="prerendered-icon" value="true" />
      <preference name="phonegap-version" value="3.1.0" />
      <preference name="fullscreen" value="false" />
      <preference name="stay-in-webview" value="false" />
      <preference name="ios-statusbarstyle" value="default" />
      <preference name="android-minSdkVersion" value="7" />
      <preference name="android-installLocation" value="internalOnly" />
      <preference name="target-device" value="universal" />
      <preference name="autohide-splashscreen" value="true" />
      <preference name="load-url-timeout" value="60000" />
      <preference name="show-splashscreen-spinner" value="true" />
      <preference name="show-splash-screen-spinner" value="true" />
      <preference name="allow-inline-media-playback" value="false" />
      <preference name="launch-mode" value="standard" />
      <plugin name="Capture" value="CDVCapture" />
      <plugin name="Camera" value="CDVCamera" />
    </widget>
    //=======================================================================================

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/dreamweaver

  • Firefox doesnt supports my mobile but they mentioned as supported for my device

    as you have mentioned firefox supports dell streak 5 ...
    but it isnt supporting my device..
    im using 2.2.2 stable version..
    hope u fix the issue..

    Development could not finish in time for our initial release, and we did not want to delay by a couple months.
    You can test out what is currently in development and available for tablets as a preview with Nightly, our developer channel builds at http://nightly.mozilla.org

  • Modify Location Column for Network Device

    Hi
    I have SCOM 2012, I have Discovery Network Rule for Monitoring Hosts.
    My Question is, How to Modify Location Column and Description for each Host.
    Thanks.

    No.
    You could create a MP with a discovery that fills up that property but it would be reset every time your device discovery runs and might not be a good idea in some scenarios.
    Basically something like that: http://www.vroege.biz/?p=746
    But of course different target and property and so on...
    Cheers,
    Patrick
    Please remember to click “Mark as Answer” on the post that helped you.
    Patrick Seidl (System Center and Private Cloud)
    Website: http://www.syliance.com
    Blog: http://www.systemcenterrocks.com

  • Find ip address for network device?

    Hi,
    Have question about the IP address, i got NAS (buffalo) which is work great with snow leopard.
    I can access network drive from finder, which is show as Wd-Mybookworld
    My problem is sometime i need to access to the NAS to config it, but i cannot find the ip address for Wd-Mybookworld
    How can i check the ip address of the NAS, if i can see and access it by its name in the finder???
    Or can i juts put its name in the safari address bar and let it link to ip automatically?
    Your help are much appreciate.

    Thank for the answer, however, this answer didnt get me the IP address but get me the link to the device name.
    For example,  my device name is "Ned-MyBookWorld" i can access without ip address by type
    http://ned-mybookworld.local./   in the safari address bar
    Thank again for your help

  • Still no support for iOS devices or non-Safari browsers

    Been a while now and still the new format doesn't support iOS devices - no formatting bar or ability to edit post.  Still, alternative browsers, e.g. iCab and Atomic, have different issues like format bar does appear but keyboard doesn't.
    Should we be expecting an update sometime soon?

    I cant find it now, but i saw a post by an apple corp poster saying that this was done purposefully to ensure a "solid" release, or something like that. Basically, iOS devices arent considered a significant user base to be worried about giving VERY limited functionality to.
    They basically said that it would be developed into future updates, but with no timelines. Sounded to me like it would be a VERY long time before we get anything above basic text editor abilities. No wait a second, basic text editors can do BOLD! We cant even do that.
    Jason

Maybe you are looking for

  • Issues with rollovers

    To start here's the URL: http://campusphilly.org/about/ There seems to be problems in every browser except safari. The red rollovers seem to shift when scrolled across and there are spaces being created on the top and bottom of the table (the red and

  • MacBook Won't go into deep sleep by itself

    I recently noticed that although my monitor will go to sleep after the specified idle time the hard drive never goes to sleep on it's own. The indicator light never goes into "pulse mode". The strange thing is I think it worked fine before I did the

  • Want my external monitor to view Final Cut Canvas

    Just bought an external monitor specifically for clients to view Final Cut on a large screen. Is there a way (button?) to use as opposed to dragging and enlarging my canvas over to the new monitor every time? thx.

  • FLASHBACK_TRANSACTION_QUERY not working

    I try the following and it always fails. Can somebody tell me why ? SQL> select * from v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE    11.2.0.3.0      Produ

  • Instrument volume different recording vs. composing

    Have a client with Logic Pro X, 10.1, OSX Mavericks, Roland MOC-1 synth Audio from synth fed thru Behringer USB audio All else being the same, when he composes he sets volume levels (in Logic) for various instruments. When recording to a track, the v