Support for RED Color 3, RED Gamma 3

With the new RED Adobe Labs Importer out now for many of the applications in the CS 6 suite,  will SpeedGrade be updated to support RED Color 3 and RED Gamma 3 ?

With the new RED Adobe Labs Importer out now for many of the applications in the CS 6 suite,  will SpeedGrade be updated to support RED Color 3 and RED Gamma 3 ?

Similar Messages

  • Sun Java System Web Server support for Red Hat EL 5

    Does anyone have any information when the Sun Java System Web Server might be supported on Red Hat Enterprise Linux 5 Server?
    Thanks

    Certification of RHEL5 will likely happen with one of the upcoming Update releases.
    There is, as far as I know, no reason why Web Server won't run on RHEL5 today though (I use it on Fedora Core 7 without ill effect, and the RHEL trail the Fedora releases a bit in technology versions).

  • OVA for LMS 4.2.1 support for Red Hat Virtualization for Servers

    Is the OVA available for download on Cisco's website compatible with anything outside VMWare?  For example, Red Hat Virtualization for Servers.

    Not without a hack on your part (which would void any hope of support).

  • Creator 2 Support for Red Hat 4?

    Could someone tell me if there are plans to officially support RH 4?
    I see on the System Requirements page that Red Hat 3 is supported, but I don't see anything about 4.
    Thank you!

    Although RH 4 is not one of our supported platforms, Creator installer will not stop you from installing on this system.
    Can you try that and let us know if you run into any problems. Thanks.

  • OSP support for Red Hat Linux Advanced Server 5.0

    Wondering, if anybody tried to install Red Hat Linux Advanced Server 5.0 with N1 SPS OSP? Does it work as with Red Hat Linux Advanced Server 4.0?
    Thorleif Wiik

    The current official GA date for SPS 6.0 is Aug 20. There is a follow-on release for plug-ins and the MS/CLI on Windows. This is currently scheduled for some time in September.

  • Configuring startWebLogic.sh for Red Hat Linux 7.2

    I was successful in configuring and executing startWeblogic.cmd, but have not been
    so lucky getting the equivalent to run on Red Hat 7.2 using startWebLogic.sh.
    For starters, even before I began editing startWeblogic.sh and just tried running
    I received the following error:
    : command not found
    : command not found
    : command not found
    : command not found
    startWebLogic.sh: line 59: syntax error near unexpected token `elif'
    'tartWebLogic.sh: line 59: `elif [ ! -f $WL_HOME/lib/weblogic.jar ]; then
    I've included both my startWebLogic.cmd and startWebLogic.sh files so that you
    can see what I'm trying to port to the sh file. I'm hoping I'm close to getting
    this to execute and run within Linux so please accept my thanks in advance to
    anyone who might have some suggestions. Interestingly enough I was able to get
    wls to start using ant, but that is obviously only good for my development env.
    The point being I'm hoping I'm close to reaching a solution.
    Below is what my startWebLogic.cmd file looks like:
    @echo off
    @rem This script can be used to start WebLogic Server. This script ensures that
    @rem the server is started using the config.xml file found in this directory and
    @rem that the CLASSPATH is set correctly. This script contains the following variables:
    @rem
    @rem JAVA_HOME - Determines the version of Java used to start
    @rem WebLogic Server. This variable must point to the
    @rem root directory of a JDK installation and will be set
    @rem for you by the WebLogic Server installer. Note that
    @rem this script uses the hotspot VM to run WebLogic Server.
    @rem If you choose to use a JDK other than the one
    @rem included in the disribution, make sure that the JDK
    @rem includes the hotspot VM. See the WebLogic platform support
    @rem page (http://e-docs.bea.com/wls/platforms/index.html)
    @rem for an up-to-date list of supported JVMs on Windows NT.
    @rem
    @rem When setting these variables below, please use short file names (8.3).
    @rem To display short (MS-DOS) filenames, use "dir /x". File names with
    @rem spaces will break this script.
    @rem
    @rem jDriver for Oracle users: This script assumes that native libraries
    @rem required for jDriver for Oracle have been installed in the proper
    @rem location and that your system PATH variable has been set appropriately.
    @rem For additional information, refer to Installing and Setting up WebLogic
    @rem Server (http://e-docs.bea.com/wls/docs61/install/index.html).
    SETLOCAL
    cd ..\..
    title WebLogic Server
    @rem Set user-defined variables.
    set JAVA_HOME=T:\bea\jdk131
    if "%CLOUDSCAPE_HOME%"=="" set CLOUDSCAPE_HOME=T:\Cloudscape_3.6
    if "%LOG_HOME%"=="" set LOG_HOME=T:\jakarta-log4j-1.2
    if "%JIKES_HOME%"=="" set JIKES_HOME=T:
    if "%BAS_ORACLE_HOME%"=="" (set ORAPATH=) else (set ORAPATH=%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\classes12.zip;%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\nls_charset12.zip;)
    @rem Check that script is being run from the appropriate directory
    if not exist lib\weblogic.jar goto wrongplace
    goto checkJDK
    :wrongplace
    echo startWebLogic.cmd must be run from the config\blueagave directory. 1>&2
    goto finish
    :checkJDK
    if exist "%JAVA_HOME%/bin/javac.exe" goto runWebLogic
    echo.
    echo Javac wasn't found in directory %JAVA_HOME%/bin.
    echo Please edit the startWebLogic.cmd script so that the JAVA_HOME
    echo variable points to the root directory of your JDK installation.
    goto finish
    :runWebLogic
    echo on
    set PATH=.\bin;%PATH%
    set CLASSPATH=.;%ORAPATH%.\lib\weblogic.jar;%CLOUDSCAPE_HOME%\lib\cloudscape.jar;%LOG_HOME%\dist\lib\log4j-1.2.jar;.\config\blueagave\serverclasses
    echo off
    echo.
    echo ***************************************************
    echo * To start WebLogic Server, use the password *
    echo * assigned to the system user. The system *
    echo * username and password must also be used to *
    echo * access the WebLogic Server console from a web *
    echo * browser. *
    echo ***************************************************
    @rem Set WLS_PW equal to your system password for no password prompt server startup.
    set WLS_PW=xxxx
    @rem Cloudscape-specific defines
    set CLOUDSCAPE_DEFINES=-Dcloudscape.system.home=./config/blueagave/data -Dcloudscape.storage.pageCacheSize=200
    -Dcloudscape.language.statementCacheSize=200
    @rem Set Production Mode. When set to true, the server starts up in production
    mode. When
    @rem set to false, the server starts up in development mode. The default is false.
    if "%STARTMODE%"=="" set STARTMODE=true
    @rem Add the following -D option to the JVM WL start-up command (after %CLASS_PATH%)
    to change
    @rem the query execute mode. The default is JDBC_ONLY and the other choices are
    EIS_ONLY,
    @rem BOTH_JDBC and BOTH_EIS (the two "BOTH_XXXX options internally execute both
    versions of the
    @rem query but only the results of the _XXXX form are returned to the query submitter).
    @rem -Dcom.blueagavesoft.query.ExecMode=BOTH_JDBC
    echo on
    "%JAVA_HOME%\bin\java" -hotspot -Xms192m -Xmx192m -XX:MaxPermSize=64m -classpath
    "%CLASSPATH%" -Dweblogic.Domain=blueagave -Dweblogic.Name=baserver -Dbea.home=T:\bea
    -Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE%
    %CLOUDSCAPE_DEFINES% -Djava.security.policy==T:\bea\wlserver6.1/lib/weblogic.policy
    %JAVA_DEBUG% weblogic.Server
    goto finish
    :finish
    cd config\blueagave
    ENDLOCAL
    [startWebLogic.sh]

    Thanks Micheal!
    "Michael Young" <[email protected]> wrote in message
    news:[email protected]..
    Hi.
    download here: http://commerce.bea.com/downloads/weblogic_server.jsp
    installation instructions here:
    http://edocs.bea.com/wls/docs61/install/index.html
    Regards,
    Michael
    Help Needed wrote:
    Hi All
    Where can i download weblogic for red hat linux 7.2? Does that come
    with
    instruction on how to install it and if not where can i find the
    instruction!!
    Any will will be appricated.
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Oracle Forms  (11.1.2.2.0) is supported on RED HAT 7

    Hi, all...
    I need know if Oracle Forms  (11.1.2.2.0) is supported on RED HAT 7, in certmatrix, the RED HAT 6  is supported, if I install in RED HAT 7, Oracle supports the product?
    Thank you.

    This forum is dedicated to support the Oracle Maven Repository and related Maven functionality and therefore, are unlikely to find answers to your Oracle Forms-related questions here.  However, if the certification matrix does not explicitly list RHEL 7, that means that it has not been certified to run on RHEL 7.

  • Colors Lack of Support for Nvidia!

    I switched to Mac for the sole purpose of using "Final Touch"..shortly after it was purchased and is now Color. I bought the new studio package and loaded it all on my Workstation. Low and behold...no support for Firewire out!!...so I will have to buy an AJA earlier then planned...and I can only get 8 bit color renderning depth in settings regardless of footage quality, bit depth, resolution, or codec. My system is a Dual Quad Core 3GHZ so 8 CPUS "Octo Mac" with 9GB of RAM and 2 TB RAID storage with a Nvidia Quadro 4500! It's rather frustrating that the highest end system apple can make is crippled in Color and I have to get a lesser system (ATI card) to make it run optimally. Any answers? I purchased the Quadro because I work in Maya...but now I think I will have to save the $1400 difference and get the ATI card so I can work in a higher bit depth , and afford to purchase a High end AJA card for output. Any ideas or answers?

    Hello,
    i posted another thread about the limitation of 8bit color depth and no realtime playback and found out that it was the same problem. We had a nvidia card installed. I just installed the app on a 8core intel with ati x1900 and it works impressivley well. Perfect playback and performance. We are putting primary, 3 secondaries with super soft gradients and a pan and scan plus output correction and the systems delivers still 22fps in 2k dpx sequences. Quite amazing. But yes, nvidia gave us 8fps with an uncorrected image.
    Get the x1900 it will make you happy.

  • Can't install Oracle 9i for Red Hat Linux AS3

    I can't install Oracle Database 9i for Red Hat Enterprise Linux.
    Please see messages following:
    [oracle@rhas3 oracle]$ /mnt/cdrom/install/linux/runInstaller
    Initializing Java Virtual Machine from /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/java. Please wait...
    /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
    [oracle@rhas3 oracle]$rpm -qa|grep libstdc++|less
    libstdc++-3.2.3-20
    libstdc++-ssa-3.5ssa-0.20030801.41
    libstdc++-devel-3.2.3-20
    libstdc++-ssa-devel-3.5ssa-0.20030801.4
    anybody know how to install for RH AS3, I have tried many time to find out the libraries but still not work and I've plan for RAC also.
    Ched

    Did you carefully go through all pre-req steps for install?
    Oracle needs some "compatibility libraries" as well (compat-lib*). Here are packages for AS 10g, most or all of which apply to Database too.
    Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5
    When required packages are in place, there's another error lurking, related to __libc_wait symbol.
    runInstaller "boots" OUI, which includes running a JRE from tmp. This JRE (build 02) is broken, but you can setup to run another one via oraparam.ini and JRE_LOCATION. Download build 10 from Sun (google "jre 1.3.1 download").

  • For Red LED's What does it mean

    I don't have my manual  and every once in a great while when I trun this beast on my puter locks no video no sounds I mean beeps but just for red LED's
    My mobo is kt266 pro 2
    tbird 1700+
    kingston 512 CL 2.5

    Here what manual says :
    "Processor might be damaged or not installed properly or damage/Discharge Lithium Battery"
    The battery, it refers too, is on the motherboard and keeps the adjustments on the Bios when you turn off the computer. Since the motherboard is new I don't think that it could be damaged or discharged. Check your cpu (processor). Ensure that it is properly cooled and that it didn't crack during the cooler installation.
    You can download the manual from this site for more information.There are manuals for all models.

  • Motif L&F: support for color schemes?

    I want to use the Motif L&F in my Java application, but I want the color scheme to be chosen as per the users installed Color theme(using the CDE Style Manager).
    Having a default bluish grey UI does not blend well with my 'Desert' or 'Delphinium' color theme... how can I achieve this in my java app with minimal code?
    Thanks

    Doesnt look like Sun provided support for Themes in
    Motif L&F...
    I tried the SwingSet demo on Solaris, and when Motif
    L&F is chosen, the Theme drop down gets disabled...Got Mantis? The GTK L&F in 1.4.2 supports themes. Otherwise, you might be able to do what you want by subclassing MotifLookAndFeel--just that class, I mean, not the whole L&F. You would actually be creating a new L&F that uses all of the Motif UI delegate classes, but replacing its color scheme with your own. I've never tried it, so it might not be that simple--and if it takes any more effort than that, it's not worth it. Not with the GTK L&F already out there, and the Synth L&F coming in 1.5.
    and, as an aside, the SwingSet font in the 'view
    source' pane is extremely small and unreadable on
    Solaris... looks like sloppy workmanship!
    It's the same on Windows. I believe it's due to a known bug that causes the HTML renderer to make Swing's already-too-small fonts, even smaller.

  • Color space support for png files

    kindly suggesting :
    color space support for png files, requiring the support (read/write) of the chunks: iCCP, cHRM, gAMA, sRGB

    Hi ChrisT,
    Thanks for the suggestion. I went to:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4148...
    Which is the software update page for my model. I see 10 items under Software Solutions, 8 of which are just video tutorial updates, not actual application updates (and none of those are for the Photo App). The two application updates are:
    HP TouchSmart Recipe Box Application Update
    HP Support Assistant Application Update
    So, are you saying that PNG file types are supported in some versions of the Photo App and I don't have the correct version? Or in other words, what am I missing?
    Cheers,
    D

  • Java(TM) 2 SDK needed for Red Hat Enterprise 4

    Hello List members,
    I am installing open-xchange on my Red Hat Enterprise 4 box but getting error "no acceptable java compiler found - please install at least the Java(TM) 2 SDK."
    JRE is installed in my system but even after a lot of research I am unable to find Java(TM) 2 SDK . Can anyone of you tell me where to download Java(TM) 2 SDK for Red Hat Enterprise 4. Its not in the SUN site as far as I know, I could be wrong.
    Please help me.
    Regards,
    Vishal

    I installed rhe4 and i have installed a lot of jsdk1.4.2-1.50 and later no any error and not collapsed java system but it has using GNOME consol avoid running system well you will changed GTK SYS.

  • API support for color extraction feature

    Is there API support for color extraction feature? if not, is
    it scheduled?

    Hello, thanks for the post.
    In order to provide the best user experience for color
    extraction, we had to split the functionality between client-side
    and server-side, so we are not able to offer an API for this
    functionality at this time. We are, however, very interested in
    feedback on what kinds of APIs are interesting to you and how you
    are interested in using them, so folks, please let us know.
    Current APIs, including the new Random theme browsing view
    and to view comments to your themes, are available on the
    kuler API
    wiki. We've seen some really fabulous and creative use of the
    kuler APIs, and we look forward to more.
    Sami

  • Correct version of Java SDK for Red Hat 4 ES on x86_64

    I need to install the Java SDK for Red Hat 4 ES on x86_64 and I'm unable to find the correct version to download.
    Note 716604 says to download 1.4.2_13 at java.sun.com but the I can't find the Linux x86_64 bit version.  Note 941595 is for Windows and Solaris only.
    Red Hat's site mentions two versions; java-1.4.2-ibm and java-1.4.2-bea.  I cannot find any SAP notes that mention those names.  Has anyone used these successfully on Red Hat 4 x86_64?
    Does anyone know where I can download the correct version of Java SDK?
    Thanks

    <a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-8">https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-8</a>
    I can open that link without a problem.
    Check again...
    Markus

Maybe you are looking for