Support for safety camera locations when using off...

I've seen people manually post the file (as text) that you can put in the relevant folder on your phone's data card - but is there any ongoing support for safety camera updates when using your phone's mapping / sat nav offline (ie no data usage)?

Jaff0 wrote:
Doesn't seem like there's any option through the PC map loader program, so the only option seems to be if anybody has posted the file - which may not always happen?
Safetyspots are not updated that often and I am sure someone on the forum would try to help you out if you asked.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

Support for EAP-TTLS-PAP (as used by Eduroam) in N...

When it will be available a solution to the lack of support for EAP-TTLS-PAP (as used by Eduroam) in Nokia N86 8MP throught a new firmware?
To many years waiting... Must we go to another solution?
Thx.

I have succeed to import the local certificate using the instructions in
http://www.jacco2.dds.nl/networking/symbian_cert_import.html
then the description in
http://www.reading.ac.uk/internal/its/eduroam/its-eduroam-config-nokia-n95.aspx
works with the given certificate.

Support for USB cameras in VBAI?

NI have a free driver that allows Vision 7.1 to access USB 2 cameras. Is there anything similar available for VBAI that would allow me to use an industrial USB 2.0 camera?

The free NI-IMAQ for USB Cameras driver is meant to support simple USB webcams that use DirectShow. For machine vision or scientific imaging applications, most USB cameras don't have the performance or the features needed, like triggering. The primary "customer" for the free driver has been universities that use webcams in labs.
With that said, there are a few industrial USB cameras out there that can be used for machine vision. The problem is tha there is no industrial USB camera standard that covers them all (like there is with FireWire), so companies like National Instruments would have to provide and support different drivers and software tools for every indutrial USB camera.
A better solution is IEEE 1394 (or FireWire). They offer the same performance as USB 2.0 cameras and are around the same price. On top of that, almost every large industrial camera manufacture has a line of industrial FireWire cameras (including Sony, Basler, FLIR, and Cohu), and they all conform to the same DCAM (or IIDC) standard. WIth this standard, our one driver, NI-IMAQ for IEEE 1394 Cameras, works with all of them.
Vision Builder AI is designed to solve machine vision applications without programming, while USB cameras usually don't provide the triggering or advanced modes necessary for machine vision. Because machine vision and USB cameras don't usually go together, we didn't provide support for USB cameras within Vision Builder AI. My question to you, another_novice, is why would you like to use a USB camera with Vision Builder AI? Are there particular features in a certain USB camera that you can't find in other cameras? I would really like to know so we can get a better picture of how our customers are using our products.
Thank you.
KyleV.

Photoshop CC 2014 hangs for nearly 15 seconds when using Layer Group Layers or Layer Palette Group from Layers commands.

Photoshop hangs for nearly 15 seconds when using Layer > Group Layers or Layer Palette > Group from Layers commands. NOT on creating new group and creating layers and drag-n-dropping layers into group manually in Layer Palette. Got a UI design file with nearly 800 layers and lot of groups. This doesn't occur in smaller files. Using OS X Mavericks, Photoshop CC 2014.2.2, Mid 2014 15-inch Retina Macbook Pro.
I understand that the solution would be just to cut the file into smaller files and design each UI view in a separate file but that would be painful. And it does not seem to be a very hard task to just group layers.

Does the document also have a lot of layer comps?
And can you post that document or send me a copy of it so we can see exactly why it is hanging?

[svn:fx-trunk] 10891: Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants

Revision: 10891
Author:   [email protected]
Date:     2009-10-06 09:46:47 -0700 (Tue, 06 Oct 2009)
Log Message:
Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants
QE notes: None.
Doc notes: None
Bugs: SDK-22676
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22676
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java

Have you tried using com.adobe.air.crypto.EncryptionKeyGenerator instead?

DNG Converter support for New Camera

What is the approximate usual time from the release date of a new camera
(specifically the Sony DSC RX100) and support for the camera by ACR or
DNG Converter ?

ACR and the Adobe DNG Converter are updated in an orderly fashion from three to four times a year. So you'll see a new version every three to four months.
The release of any new camera model has no bearing on this.

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

Why would iPad 1st Gen show up in two different locations when useing find my iPad App. ?

Why would iPad 1st Gen show up in two different locations when useing find my iPad App. ?

Why would iPad 1st Gen show up in two different locations when useing find my iPad App. ?

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

About accessing using a browser: I can get in using Firefox or Safari, butI cant set the page up to see all my inboxes at the same time (so I can file emails appropriately) or get a preview to save opening every mail

Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
Sebastian

Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian

When will new Lightroom update be available with support for new cameras

Just purchased a fugi XT1. Any idea when new Lightroom update will be available for support for the raw RAF files?
Thanks,
Matthew Kraus

dj_paige wrote:
Right here, on the front page of this very forum, Adobe provides the answer
Well, not really - that FAQ doesn't explains policy on pre-announcing support, which is what's actually being asked about.
This gets closer, but even this is unspecific as to the policy...
Matthew, the short answer is: nobody who knows is allowed to say.

Changing Export Location when using Publish Services to Hard Drive?

Hi,
I am aware that typically when using publish services it is not possible to change the export location once it has been set. This has put me in a very precarious situation; let me explain.
I work for a distribution company that sells 15+ product lines. For almost every product, they have a photograph. I was asked to set up a system whereby a number of sales representatives could access these photographs in an organized fashion from their own computers. This is how I have set things up: A media computer (backed up onto an external hard drive) has all the raw files. In lightroom I have set up two publish services to hard drive. The export location for these two publish services was an external drive that was accessible throughout the company network. Unfortunately, while I was gone, the external drive was changed over to a cloud-based system. As such, the export location for my publish services no longer exists.
Of course, I could go and re-create the publish services, but unfortunately that would be an incredibly laborious process because each publish service has 10 or so sets with 2-4 levels of folders amounting to several hundred folders that would need to be re-created. Moreover, because of the complexity of the system, I made them all smart-folders with specified attributes, etc. So re-creating all these folders would take a whole lot of time and could literally drive a guy crazy (I would know, I set the thing up and it did almost drive me crazy!)
So, I was wondering if there is any lightroom wiz out there who knows a work-around for my issue.
Now, I did do some digging already and I came across this article: http://blog.27shutterclicks.com/2012/03/how-to-change-the-publish-service-export-location- in-lightroom-3-4/ which outlines a method for changing the export location! However, as far as I can tell, I would still have to change the export location of each folder manually, which would basically be just as complex and confusing as recreating the publish service anyways. Am I correct in this thinking, or using this method is there a "root" folder than I can change, which will change every other folder?
Hopefully I have outlined this clearly enough. I will really appreciate any response! Thanks and have a good day.
-M

MichaelKuby wrote:
I am aware that typically when using publish services it is not possible to change the export location once it has been set. This has put me in a very precarious situation; let me explain.
Yes, it is not possible to change the export location for a Publish service.
But it is possible to set up another Publish Service with a different location.
Under <Publish Services> right-click the header bar where it says "Hard Drive: .... " and select <Create Another Publish Service via Hard Drive>.
See screen shot:
In the editor that comes up select the "cloud" as location.

Linking Own Safety Camera Locations

I have the Nokia 6710 Navigator with Maps 3, however, there is no safety/speed camera information for South Africa.
On my previous 6110 with Route 66 nav software, I just imported the camera locations as POI, saved the audio files to the phone and from within the Route 66 software changed the Alarm settings for the POI category. Easy!
I've now imported the camera locations as POI to the 6710, but there is no feature in Map similar to the Alarm function in Route 66.
So how do I manually impute speed camera locations to automatically warn me when I go near?

Yes you can... that is exactly what i am doing.
With the N97 mini i do sometimes even run Sportstracker as 3rd app in parallel... but this is where the trouble then starts.
Everything works fine, except that the processor-load seems to be too high with 3 apps running, and so either maps or poialert does start to stumble in the voice or warning-ton.
But 2 apps in parallel, maps and alert, seems to work without prob...
So... not sure about your device specs, and if you have more or less processor-power.
By the way... i have the data downloaded from somewhere else, and i am quiet happy with the data....

Support for Third Party Apps when they take your money and don't respond

Does Blackberry App do anything about third party apps that take your money and then don't give you what you paid for or respond? I paid $4.99 for Jeweled game from getempower, it downloaded and worked a bit, then it said I needed to Register. When I clicked Register, nothing happened, it just said "checking registriation" forever. I clicked on the Support Email provided and it returned an error saying "We get too much spam so you can't email us anymore, so please go to our website for support." So I went to the website www.getempower.com, and got to the Support form and filled it out, and it said "you cannot submit form until you choose the app" but when I tried to choose the app it wouldn't let me. I can't see anywhere else on the web page to contact them. So I paid for the game but it won't let me get to it. I looked at the reviews and it looks like several other people have had this same problem. I guess I thought buying something through App World would be trustworthy - App World, do you stand behind the vendors you allow to sell on your site?

Hi and Welcome to the Community!
Firstly, as a user-to-user community, no one here can answer your question with any level of authority whatsoever. This site is not a channel for any formal communications with RIM. All support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user...and that is the required path for formal support for issues such as yours (including requests for refund, if you choose to go that route). So, your escalation path is not here, in these forums.
But, have you tried removing and resinstalling the app? And/or clearing the AppWorld cache?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Support for safety camera locations when using off...

Similar Messages

Maybe you are looking for