Support for Symantec Enterprise Vault?

Hello,
I have EV2007 running against an Exchange 2003 server. EV is configured to archive messages after two  months. I also have the Blackberry Internet Service (BIS).
Problem is that when EV archives a message, it changes the state of the message so that BIS thinks it's a new message - and pushes it to my Blackberry again
I guess that EV is changing the "last modified" field on the message in Exchange and that is causing IMAP to report it as being new plus the original senders get a second delivery report back from the Blackberry!
Has anyone seen this before and found a workaround?  I'm also told that the issue remains whether or not you are running the Blackberry Enterprise Server.
I've contacted Symantec regarding this and was told that they have been trying to work with RIM on this but RIM has been less than cooperative.  
Thanks.

well if symantec is changing the state of the message; symantec is the culprit here not BIS. I dont think RIM will change BIS setup just for syamntec ( there wont be many users is symantec/bis setup out there). Regardless this is Symantec issue.
The statement about BlackBerry enterprise server might not be true though, i dont expect it to re-push message to BB if you were running BES. You can test this by installing BBProfessional software, which is a free download for one user.
http://www.blackberry.com/select/professional/express.shtml
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Similar Messages

  • Issue with opening .PDF files after recalling from Symantec Enterprise Vault

    Good Morning,
    I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old.  Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged.  It is inconsistent as to which files it occurs with.  I am not ready to believe that I have that many corrupt files out there.  I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
    The files are on a network share, but I also tried copying them to my local desktop and still received the error.
    I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
    Thank You
    Brian Dougherty

    Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
    Might have been damaged is pretty cut and dried in its meaning and interpretation.
    There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
    You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

  • Migrating emails from Symantec Enterprise Vault to Exchange Online

    Hi
    I am in the process of planning a migration from on-premises Exchange 2010 to Exchange Online in Office 365. The on-premises Exchange environment is using Symantec Enterprise Vault v9 for archiving emails older than a certain number of months. 
    I am planning to use the cutover migration method to migrate mailboxes to Exchange Online. What is the best way to migrate email from Enterprise Vault to Exchange Online? Will the E-mail Migration Tool in Exchange Control Panel do the job or will a third
    party tool need to be used? 

    You have a few options ...
    a/ Export all the mail from each archive to a PST file, and then import that in to Exchange, or Office 365.
    b/ Export all the mail from each archive back to the original mailbox.
    c/ Use a third party tool, like Archive Shuttle from QUADROtech which can migrate directly to Office 365 from Enterprise Vault.
    Hope that helps,
    There are other migration solutions out there as well from TransVault and NUIX.

  • Support for WPA-Enterprise, WPA2-Enterprise wifi s...

    hi all
    I try to connect my phone to corporate wifi but failed because the phones hangs. my company uses WPA2-Enterprise wifi. my phone clearly works with WPA2-Personal wifi security at home. will these profiles of security be supported in future update?

    Although this is the right section for this question, let us continue with your original post …

  • IPhone 3GS (au) support for WPA2 Enterprise

    Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?
    Also, whether it depends on the version of iOS as well.
    Thanks.

    Enterprise networking is now supported I believe.
    It's not something I know much about, but the following article(s) may help you.
    Installing a Profile
    Configuring the Apple TV

  • Error "you cannot copy an enterprise vault shortcut" in outlook 2007 calendar

    I am trying to copy a meeting from a calendar in outlook 2007 that my co-worker has shared with me over to my calendar. I used to be able to just drag and drop it on my calendar and it would make a copy. Now every time I try to copy anything I get this
    error "you cannot copy an enterprise vault shortcut" you can restore the item and then copy the restored item. Why am I getting this and how can I stop it or even how can I "restore" the item and get around it.

    If your organisation uses the Symantec Enterprise Vault product, this seems to be a known issue:
    http://www.symantec.com/business/support/index?page=content&id=TECH143955
    You should have your email administrator check into this with Symantec (it's not a Microsoft product issue)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • ADF BC support in Oracle Enterprise Pack for Eclipse (OEPE) 11g/12c ?

    Hi All ,
    I was having a look at a few demos on http://www.oracle.com/technetwork/developer-tools/eclipse/demos-082305.html wherein I could figure out that there is cool support for EJB/JPA , ADF Faces , ADF Bindings etc using OEPE 12c.
    Was wondering if there is support for ADF Business Components or is it planned for a later release ?
    Current Business Services Support : http://download.oracle.com/otndocs/technology/products/enterprise-pack-for-eclipse/bus-services/OEPE-BusinessServices.html

    We currently don't offer support for Oracle ADF BC in Eclipse and while we might consider this for a future release this is not planned right now.

  • Clustering support for BEA Weblogic Enterprise for Solaris/SUN HA

              Hi,
              Does BEA WLE 5.0.1/5.1 support SUN's SunCluster 2.X HA Framework for the Sun
              Enterprise set of Hardware?
              If not - do you plan to provide support for it in any future releases?
              Thanks and regards
              Mark O'Brien
              

    Look for WLS 10.3 under Oracle rather than BEA group.
    Konstantin

  • Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.

    Hello Everyone,
    Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.For Symantec Endpoint Protection 12.1, a maintenance patch has been released on July 29, 2015. Customers will need to be current on maintenance to receive the maintenance patch update. For more information, visit our SEP 12.1 Windows 10 Knowledge Base.You can upgrade to Windows 10 with Symantec Endpoint Protection 12.1.6 MP1 installed. You must uninstall earlier versions of Symantec Endpoint Protection. The operating system upgrade stops if it detects an earlier version of Symantec Endpoint Protection.The following operating system upgrade paths are supported with 12.1.6 MP1 installed:Windows 8.1 to Windows 10Windows 8 to Windows 10Windows 7 to Windows 10For more details check the following article:http://www.symantec.com/docs/INFO2746SEP...
    This topic first appeared in the Spiceworks Community

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • Enterprise System 5 support for Windows 2003 server

    Hi,
    Can you tell me if it is possible to run Sun Java Enterprise System 5 on a windows server and get the portal server to work?
    Weare currently using JBoss ... and not very keen on it as a portal server.
    I tried installing ES5 but was unable to get the portal server to play, then i read something about no support for windows 2003 in ES5.
    Can someone confirm if this is true, unfortunately I am tied into using a windows server for lots of reasons. Is the download for ES4 still available? I believe Portal 6.0 instead of 7 is still ok for windows Server 2003 ?
    If Portal 7.0 will play with windows, is there a guide somewhere that you can point me to as I am totally new to portals and could use a bit of an idiots guide.
    Any info welcome !!
    Cheers

    The support for Sun Java System Portal Server on Windows in Java Enterprise System 5 is limited to evaluation and development only. The Windows distribution for Portal Server (PS 7.1 Update 2) is provided as a pre-configured install. To install it, you unzip the file, and run a small setup script to change the hostname information. The pre-configured installation is setup with a fixed install location, ports, etc. so it is not really suitable for a deployment for that reason. Once installed, all of the functionality is there otherwise except the ability to patch the system.
    Note: I just tried going through the download links, and there is something broken in the Sun download center. I've sent an internal notification about this.

  • BlackBerry Enterprise Cloud Services - MS Exchange Online Plan 2 - Support for Legacy 7.1 Devices and Costs?

    Hello.
    All questions below relate to the MS Exchange Online Plan 2, and BlackBerry Enterprise Cloud Services (BBCS).
         -  How much does it cost to install the BBCS service?
         -  Is there support for legacy 7.1 BlackBerry devices?
    I have searched online for these answers but I've been unsuccessful answering these two questions. I'm aware that BBCS is available
    for the Exchange Online Plan 2 but I cannot confirm if there is a fee. Likewise, I've been unable to find out if legacy 7.1 OS BlackBerry devices are support on BBCS.
    Many thanks.

    I recommend that you post this in the Exchange Online (Office 365) Forum:
    http://social.technet.microsoft.com/Forums/en-US/onlineservicesexchange/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Support for JBuilder 3.5 Enterprise

    Is there support for JBuilder 3.5 Enterprose edition?
    Thanks.

    Hi,
    Check in OSS Note :
    Besides the information in the Upgrade guide, SAP Notes 832713 (for Web Templates) and 832712 (for Library Items) contain the most current information about the migration process, such as known restrictions.
    0QUERY_TEMPLATE was the default template for the BEX Web Analyzer in 3.0. 0ADHOC has been introduced as a successor to 0QUERY_TEMPLATE in BW 3.5. 0ANALYSIS_PATTERN is the default template for the Web Analyzer of the Java/EP based runtime in NetWeaver 7.0 (2004s) BI.
    All three templates are still available in NetWeaver 7.0 (2004s) BI. SAP recommends to use 0ANALYSIS_PATTERN as standard for the BEx Web Analyzer (on the Java/EP runtime). SAP recommends to use 0ADHOC as standard for the BEx Web Analyzer (on the ABAP runtime).
    SAP does not recommend to use 0QUERY_TEMPLATE anymore. It does not run out-of-the-box anymore in NetWeaver 7.0 (2004s). You first need to use the Chart Migration Tool that was introduced with BW 3.5 and migrate the template and corresponding reusable Web items first.
    Check here also:
    http://gnanamax.com/Documents/BI%207.0%20Functional%20Upgrade%20-%20Migration%20points.pdf
    Page No. 11
    Thanks,
    Hema

  • SQL Server Enterprise support for Offline / Online Application development

    Hi,
    We have suggested to use the SQL Server 2012 as Database for our Enterprise application. We have the Offline/Online two set of application. Can you suggest any offline database to sync the Online SQL Server database.
    Thanks,
    Sethu

    What is an offline database?
    One can setup an "online" database and an "offline" database using SQL Server 2012 Enterprise Edition.
    SSIS packages can be used to synch data between the databases:
    http://blogs.msdn.com/b/jorgepc/archive/2010/12/07/synchronize-two-tables-using-sql-server-integration-services-ssis-part-i-of-ii.aspx?Redirected=true
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • OS X support for offline files

    Dear all,
    I have a mixed environment of workstations running both OS X and Windows that connect to file shares hosted on Windows file servers.  In order to be able to manage the storage space effectively, tape based archiving was implemented using Symantec's Enterprise Vault for File System Archiving.  EV and many other archiving solutions use the Windows Offline file attribute to mark a file that has been archived off and install a filter driver into Windows so that archived files can be recalled directly from Windows Explorer without requiring additional software (this is also known as a reparse point).  Please note that this is different from how Microsoft intended offline files to be used for synchronising between a roaming laptop and a network share (see KB 312717).
    OS X does not have any support for offline files natively, both for how Microsoft intended it to be used and for use with archiving software as a reparse point.  There are a couple of offerings on the market which add the required functionality to OS X, but recent updates to OS X have rendered these offerings non-functional:
    10.6.7 - I understand that Apple replaced the SMB/CIFS modules with their own code.  At this point, it no longer became possible to recall archived files using said software offerings, when connecting to a Windows file server via SMB.  See Apple bug ID 10836961.
    10.7.4 - a kernel update is included which means said software offerings are now not able to block the icon preview in Finder.  The icon preview in Finder causes archived material to be recalled which we do not want it to do (imagine the problem when using tape as the archiving platform - this will cause a huge recall job on the tape drives)
    This is going to cause significant difficulties as it effectively means that we can't use archiving with OS X to manage our storage costs. 
    I'm writing this as I'm hoping that someone will know of a product or solution that is able to work around the 2 difficulties noted above, or that someone from Apple is going to read this and realise that this is a serious problem.  The ideal that is required is to add support for the offline files, in particular reparse points, directly into OS X.
    Many thanks.
    A frustrated storage engineer.

    Hi Richard,
    We are looking at file archiving here and have the same potential issues. We haven't evaluated this product, but it claims to solve the problem:
    http://www.grouplogic.com/enterprise-file-sharing/mac-file-archiving-system/
    Good luck
    Mark

  • Enterprise Vault Outlook 11.0.1 plugin

    Trying to find the best way to package the Enterprise Vault Outlook 11.0.1 plugin using SCCM 2012. It is an MSI and we created one package but getting different results on different machines, some are restarting, others are closing Outlook to uninstall the
    previous version 9.0.2. Any help would be great.
    thanks
    Pat

    Sorry for the delay in responding.
    I checked our approach for this EV8 -> EV10 Outlook Addin upgrade, and we just executed the newer MSI over the top of the old EV8 client install.
    It looks like we modified the MSI a little bit, not sure exactly what we did that for.
    we just launch msiexec /i "Symantec EV Outlook addin.msi" MSIRESTARTMANAGERCONTROL=DISABLE /reboot=ReallySuppress
    (we found this information in the EV documentation e.g. EV10.0.4-Setting_up_Exchange_Server_Archiving.pdf )
    probably here: http://www.symantec.com/docs/DOC7414
    Symantec also mention some details in there about open file handling, which can trigger the need for a restart or prompt the user...
    We don't have any other scripting or pre-requisites or dependencies or anything.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for