Support for using CS5 with Joomla

So far, the information to get dreamweaver working with Joomla has been non-existent and/or extremely vague.  I've spent my entire Sunday, trying to simply get this to work.
I ran a local server and followed the adobe tutorial, I uploaded my mysql database file and I either get an error saying that the dynamic-related files could not be reached etc etc etc. error, or I get simply a blank page when I try to view it in the localhost/FOLDER file.
I am lost.  There is little support for this specific task.  It's my only interest in DW considering I work exclusively with Content Management Systems.  So far setting this up is time consuming, confusing, and well, it simply doesn't work.w
IS THERE understandable documentation available for setting up the most TALKED ABOUT feature of DWCS5!?!?!?  Is it really even possible?  At this point I am starting even doubt the validity of the posts of people claiming they got this to work.  So far I get a string of unpredictable errors in an extremely complicated and confusing workflow, again, just trying to get the most talked about feature of CS5 to work as advertised.  I'm so frustrated, words cannot express.
-Matt

Hello out there? Can anybody be so kind an post a link to a good dokumentation? I am experiancing just the same problem and yes - I am frustrated, too. Pleeeese!!!
Thank you very much for any little hint.
Blechkrähe

Similar Messages

  • Support for using TNSNAMES with Oracle Thin Driver?

    Hi.
    In the official Oracle JDBC FAQ (http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm), they say that from the "10.2.0.1.0" release, the Thin driver hast support for using TNSNAMES entries. Thus, you can use URLs like this:
    jdbc:oracle:thin:@GL (thin driver, but connection info defined in tnsnames.ora)
    Does anyone know how could I use an URL like this? Do I have to install the Oracle client? or can I simply copy a tnsnames.ora file someplace on disk and specify its ubication through an environment variable or something like that?
    I haven't find util information in the Oracle site....any ideas are much appreciated.
    Thanks in advance.

    I just found some info here:
    Re: Thin Driver and Load Balancing
    Thank you very much.

  • Characters ! ~ - * ( ) ' will be de-supported for use in identifiers ?

    I received the following warning errors during a test import of an mbis EUL owned AP business area.
    Here is an example :The identifier for Join 'AP Vendors -> AP Checks' contains one or more of the characters ! ~ - * ( ) ' which will be de-supported for use in identifiers in future releases of Discoverer - see release notes for more details.
    The problem is that this is an EUL that was packaged with the ERP we purchased 3 years ago.
    I generated an issue with the vendor but would like to know more about it from this forum.
    How can this be fixed so that we don't have a problem with future releases of Discoverer.
    What are identifiers exactly? They do not appear to be primary keys, yet they are unique keys in some instances ( I did not check all of the tables.)
    Also, any information you can direct me to would be helpful.

    I get this error message all the time when I went from 4i to 9i. I believe the message is related to the actual display name of the join which cannot contain the dash (-) like you have in the AP Vendors -> AP Checks join.
    I think it might be the actual identifier if you look at the properties of the folders and items. The identifier I think is listed last and I think it contains the dash or underscores as part of the identifier name which Discoverer creates but you can most certainly change. I don't know the domino effect it will have if you change the identifier to comply with the error message. I haven't made the change yet either but imagine in the near future I would need to.

  • [svn:fx-trunk] 9349: * Added support for using getStyle() in Mxml data binding expressions.

    Revision: 9349
    Author:   [email protected]
    Date:     2009-08-17 11:32:37 -0700 (Mon, 17 Aug 2009)
    Log Message:
    Added support for using getStyle() in Mxml data binding expressions.
      In addition to the existing "function return watcher" data binding
      functionality, we register to listen for style related change events
      when we see a function marked with [Bindable(style="true")].
      UIComponent's and TextGraphicElement's styleChanged() will now
      dispatch events for "getStyle()" FunctionReturnWatchers to handle.
      When null or "styleName" is passed into styleChanged(), we dispatch
      an "allStylesChanged" event.
    QE notes: mxunit test to follow
    Doc notes:
    Bugs: SDK-20394
    Reviewer: Glenn, Pete F, Peter D
    Tests run: checkintests, mxunit databinding
    Is noteworthy for integration: only if you want to start using it.
    Code-level description of changes:
      modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension.java
        Modified generateWatcher() to do the AST equivalent of the
        WatcherSetupUtil.vm change.
      modules/compiler/src/java/flex2/compiler/as3/binding/FunctionReturnWatcher.java
        Removed unused isNew variable and added isStyleWatcher variable.
        Modified shouldWriteSelf() to return true if isStyleWatcher is true.
      modules/compiler/src/java/flex2/compiler/as3/binding/WatcherSetupUtil.vm
        Modified writeFunctionReturnWatcher macro to add a true arg to the
        FunctionReturnWatcher constructor call when isStyleWatcher() is
        true.
      modules/compiler/src/java/flex2/compiler/as3/binding/BindableFirstPassEvaluator.java
        Modified evaluate(Context, MetaDataNode) to skip reporting an
        error for no events when style is true.
      modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingFirstPassEvaluator.java
        Replaced insideCallExpression boolean with callExpressionStack
        Stack.  The "!insideCallExpression" checks were replaced with
        callExpressionStack.isEmpty().
        Modified addBindables() to handle [Bindable(style="true")].
        Made argumentListStack and resetSet more strongly typed.
      frameworks/projects/framework/src/mx/core/UIComponent.as
        Modified styleChanged() to dispatch a "Changed" and "allStylesChanged" from the previous
        parent and add listeners to the new parent when isStyle is true.
        Modified eventHandler to notifyListeners() when isStyle is true.
      frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicElement.as
        Similar changes to UIComponent.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-20394
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/binding/FunctionReturnWatcher.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/BindableFirstPassEval uator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension. java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingFirstPassE valuator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/FunctionReturnWatcher .java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/WatcherSetupUtil.vm

  • Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.

    Hello Everyone,
    Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.For Symantec Endpoint Protection 12.1, a maintenance patch has been released on July 29, 2015. Customers will need to be current on maintenance to receive the maintenance patch update. For more information, visit our SEP 12.1 Windows 10 Knowledge Base.You can upgrade to Windows 10 with Symantec Endpoint Protection 12.1.6 MP1 installed. You must uninstall earlier versions of Symantec Endpoint Protection. The operating system upgrade stops if it detects an earlier version of Symantec Endpoint Protection.The following operating system upgrade paths are supported with 12.1.6 MP1 installed:Windows 8.1 to Windows 10Windows 8 to Windows 10Windows 7 to Windows 10For more details check the following article:http://www.symantec.com/docs/INFO2746SEP...
    This topic first appeared in the Spiceworks Community

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

    I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

    Thanks to Bobthefisherman & Turbostar.  Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid.  Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
    Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced. 
    The HD wasn't partioned by the way.  And I did have just over 40GB of contiguous space. 
    Thanks again.

  • Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    We're working on an update to Ideas to add support for Ink & Slide.  Stay tuned for further information as to timing.
    Kim
    Adobe Ideas Team

  • Is there a set up tutorial for using Outlook with iCloud

    I am using Outlook on my PC (windows 7 and Outlook 2010)
    1. Is there a set up tutorial for using Outlook with iCloud?
    2.  Please clarify, I don't need to set up a XXX@me email account to get iCloud to sync with Outlook, correct?
    3.  My emails appear to by syncing, but the Outlook Calendar does not sync its Pre-Cloud entries with my Iphone and IPad.  Is this what is to e expected? 
    4.  If I put a calendar entry on my PC's Outlook Calendar, it should sync with my Iphone and Ipad correct?  Again, what about entries that were made in Outlook before I signed up for iCloud? 
    I am hoping there is a simple step by step tutorial somewhere, because I am pretty disappointed with Apple about how confusing this is all becoming. 

    Hello:
    Sorry I can't bring you a solution but I am surprised your mail is working. Many of us with outlook 2010 seem to be having trouble sending. It seems apple's Pxx-smpt.mail.me.com server is rejecting the loging. I have tried it on three PC's with Win7 and Outlook 2010. It simply does not work after installing from the iCloud control panel. I have also manually configured the servers, encryption method, etc to no avail.
    On the positive side, Calenda and contacts does work. First time around, the claendar duplictaed everything but I manually cleans it out. The iCloud calendar is a seperate calendar in Outlook. It seems to perform a sync with your local calendar one time. From them on, I beleive you need to use the iCloud calendar to have the same appointments show on each device. I renamed the defaut iClouds calendar to "iCloud Calendar". It's definatelly confusing and not seamless. It would be nicer to sync your OL calendar permenantly so you don;t see two or more.
    Let me know your settings for iCloud email on Outlook. Try sending an email from the @me.com account.
    Thanks,
    Kevin

  • Any sample for using Captcha with Oracle ADF ?

    Hi
    Thank you for reading my post
    is there any sample available for using captcha with adf faces ?
    thanks

    Hi,
    nott hat I am aware of. However, I started a project to build a custom JSF component using
    http://jcaptcha.sourceforge.net/
    Not sure when I have this finished, but the goal is to have this working with ADF Faces (not sure if it makes sense to bind the component to ADF though)
    Frank

  • Question for using ORACLE with SOLARIS

    Hi Experts,
    I have worked Oracle with Linux in one of my projects 2yrs back and i was just a developer, used to write SQL Query, Creating Table and Objects.
    Now i got a question from TL which is
    Tell me about consequences for using Oracle with Solaris?
    I am not worked ORACLE with SOLARIS, Can some one give me the answer for this question with
    1. Difference between ORACLE with LINUX and ORACLE with SOLARIS.
    2. Advantages and Disadvantages Between ORACLE with LINUX and ORACLE with SOLARIS.
    Thanks,
    MuraliDharan V

    Hi MuraliDharan V,
    It would had been better if you had searched first;
    Here is one
    Advantage for Linux64-bit Versus Solaris-x86_64 OS in RAC
    And beside that your question is incomplete:
    -What Oracle? Database, etc
    -Which Version? 9i, 10g, etc
    Aside from that a simple search on google might have answered your question as well.
    But I think there is some new trend of dumping questions here before searching.
    Ex Senior DBA

  • IPod Reset Utility is not supported for use with Windows Vista??????

    is there anyway to get pass this?
    i need to use the ipod resetutility to reset my shuffle
    but the only problem is that i have Vista and the program isnt
    supported for vista. can someone help me out here?

    well the only problem with that is that
    everyone i know use vista -.-

  • Future support for using PL/SQL core business logic with ADF BC

    We want to migrate our large Forms client/server (6i) application to ADF, possibly using a migration tool like Ciphersoft Exodus.
    One scenario could be to use ADF BC and ADF-Faces or a different JSF-Implementation for presentation and business layer but keep our heavy PL/SQL-businesslogic inside the Oracle database in packages, triggers, functions and procedures.
    This scenario could be chosen due to the huge amount of interconnected logic inside the database (10 years of development; no technical components; any package may access any table and more of this kind of dependencies). The business logic nowadays held in Forms client will be moved mainly into the database as a prerequisite to this scenario.
    Choosing this "keep-logic-in-DB"-scenario we need a good support by ADF BC to do so. We know and prototyped that it is possible to call some PL/SQL via JDBC from ADF BC and it is possible to use stored procedure calls for standard business entity data access (ins, del, upd, ..). But this does not solve our problems. We want to reuse core business logic coded in PL/SQL. This is much more than change the ADF standard behavior for an update with an own PL/SQL-call.
    Now my question:
    Will there be a kind of sophisticated support to use ADF BC in combination with database-kept logic?
    If so, when will this happen and how will the common problems of transactional state inside the database and inside the ADF BC be solved? Any plans or ideas yet?
    Many other clients do have similar applications built in Forms and PL/SQL and would be glad to hear about a path of direction.
    I've read the technical article 'understanding the ADF BC state management feature' which you have contributed to. One current limitation is pointed out there: Using PL/SQL with ADF BC limits ADF AM pooling to 'restricted level' which reduces scalability.
    Are you aware of additional main problems/tasks to solve when using PL/SQL heavily with ADF BC, which we have to think about?
    Thank you for any response.
    Ingmar

    My main problem is two 'concurrent' areas holding state in an application system based on DB-stored PL/SQL-logic in combination with ADF BC.
    For a new System everything can be made ok:
    Sure, it is possible to build a new system with the business logic included in ADF BC only. All long-living state will be handled in the BC layer ( including support for UnitsOfWork longer than the webside short HTTP-requests and HTTP-sessions and longer than the database transactions.
    For an old system these problems arise:
    1. DB data changes not reflected in BC layer:
    Our PL/SQL-logic changes data in tables without notifying the ADF BC layer (and its cache). To keep the data in ADF BC entity objects identical to the changed database content a synchronization is needed. BC does not know which part of the application data has been changed because it has not initiated the changes through its entity objects. Therefore a full refresh is needed. In a Forms4GL environment the behavior is similar: We do frequently requeries of all relevant (base)tables after calling database stored logic to be sure to get the changed data to display and to operate on it.
    -> Reengineering of the PL/SQL-logic to make the ADF BC layer aware of the changes is a big effort (notifying BC about any change)
    2. longer living database transactions
    Our PL/SQL-logic in some areas makes use of lengthy database transactions. The technical DB-transaction is similar to the UnitOfWork. If we call this existing logic from ADF BC, database state is produced which will not be DB-committed in the same cycle.
    This reduces scalability of ADF BC AM pooling.
    Example:
    a) Call a DB-stored logic to check if some business data is consistent and prepare some data for versioning. This starts a DB-transaction but does not commit it.
    b) Control is handed back to the user interface. Successful result of step a) is displayed
    c) User now executes the versioning operation
    d) Call another DB-stored logic to execute the versioning. DB-transaction is still open
    e) Business layer commits the transaction automatically after successful finishing step d). Otherwise everything from a) to e) is rolled back.
    -> redesign of this behavior (= cutting the 1to1 relation between LogicalUnitOfWork and the technicalDatabaseTransaction is a big effort due to the big amount of code.

  • Has Adobe ended support for Photoshop CS5

    I use Secunia PSI to monitor my software for updates. Right around the time CS6 shipped, PSI started reporting all of my CS5 applications as "end of life" meaning no more patches will be released.
    Is it correct that CS5 is no longer supported with patches?
    CS5 to CS6 seems like an upgrade of just one version, but maybe Adobe considered CS5.5 to be a full version upgrade?

    Generally speaking, Adobe always stops releasing point revisions of their software the minute a new major version is released.
    Version 12.anything is considered CS5, and the 12.0.4 patch for Photoshop CS5 brought it up to be functionaly equivalent of Photoshop CS5.5 (save for cloud licensing).
    That said, there's a 12.0.5 that's "half released" to address some concerns over a vulnerability when opening TIFF files that was brought to light around the time of the Ps CS6 release.  It's not clear whether 12.0.5 is ever going to be released through the mainstream software update process.
    Out of curiosity, why do you use a 3rd party update monitoring package?  Adobe has one of its own.
    -Noel

  • Support for using Digital Signatures

    I work in the legal department in a large company.  We are considering using Adobe's Digital Signature for our annual reports and financial documents.  However, I am unable to find how to get support on using such a feature.  Is using this feature pretty simple with Acrobat Pro v. 9?  I walked through the step-by-step features to initially set it up, but are there additional things I need to do to make sure the signature is completely secure? Do I need to purchase additional features or add-ons?  Is it possible to get someone to come to our company and provide a training on this feature?

    Using Acrobat Pro to digitally sign PDF documents is a very simple feature to use from an end user's perspective.  No extra plugins are required to have Acrobat generate a digital signature.  What you do need however is a digital certificate for each user, the certificate is used to create a user's digital signature.  Acrobat does not provide the ability to manage certificates, for this you require a Public Key Infrastructure (PKI) from a company such as VeriSign or Entrust.  Here are Adobe's security partners:
    http://www.adobe.com/security/partners/index.html
    Are you looking to have end users sign documents?  Based on the types of documents you described, you may want to look into "Certifying" documents using Adobe's Certified Document Services.  You can get some more information here:
    http://www.adobe.com/security/partners_cds.html
    Regards
    Steve

  • RMS Client support for ADFS 3 with MFA

    We are using Azure RMS. The Users are synchronized from on-premise AD onto Azure AD. If we configure the Relying Party Trust for Azure RMS authentication with MFA (Multi-Factor-Authentication like SMS, OneTimeToken...), the User couldn't login from a Windows
    Client with the RMS Client installed.
    The reason is, that RMS Client only ask for username and password. A another box for OTP, SMS Code and so on doesn't appears.
    Because the login into Azure RMS to get access to protected documents is very sensitive, it should be able to using MFA with the RMS Client.
    Are there a timeline to implement MFA support in the RMS Client (e.q. for Windows)?
    Thanks for your help.

    Office apps have historically required app passwords since they didn't support MFA. Newer Office apps are now using modern authentication that allow sign-in through ADFS and/or Azure AD. If MFA is enabled in Azure AD for federated accounts, the primary
    authentication should be done by ADFS, after which Azure AD will perform the MFA. The new Android apps came out later than the new iOS apps. There is a blog post put out by the Office team with details on the modern auth for their apps at
    http://aka.ms/officemodernauth.

Maybe you are looking for