Support for Windows 2003 on AGS 2.1

I've been trying to find out if AGS2.1 is supported on Windows 2003 and 2003 SP1. The installation and configuration guide document for AGS 2.0 states that the minimum system requirements are either Windows 2000 Server or NT 4.0 Server with SP6a.
Would greatly appreciate if anyone can confirm if support extends to Windows 2003 and 2003 SP1 as well.
Thanks
Richard

I am interested in the same thing. How about windows server 2008? Richard, did you ever get an answer??

Similar Messages

Enterprise System 5 support for Windows 2003 server

Hi,
Can you tell me if it is possible to run Sun Java Enterprise System 5 on a windows server and get the portal server to work?
Weare currently using JBoss ... and not very keen on it as a portal server.
I tried installing ES5 but was unable to get the portal server to play, then i read something about no support for windows 2003 in ES5.
Can someone confirm if this is true, unfortunately I am tied into using a windows server for lots of reasons. Is the download for ES4 still available? I believe Portal 6.0 instead of 7 is still ok for windows Server 2003 ?
If Portal 7.0 will play with windows, is there a guide somewhere that you can point me to as I am totally new to portals and could use a bit of an idiots guide.
Any info welcome !!
Cheers

The support for Sun Java System Portal Server on Windows in Java Enterprise System 5 is limited to evaluation and development only. The Windows distribution for Portal Server (PS 7.1 Update 2) is provided as a pre-configured install. To install it, you unzip the file, and run a small setup script to change the hostname information. The pre-configured installation is setup with a fixed install location, ports, etc. so it is not really suitable for a deployment for that reason. Once installed, all of the functionality is there otherwise except the ability to patch the system.
Note: I just tried going through the download links, and there is something broken in the Sun download center. I've sent an internal notification about this.

Are you shouting SOS? Support for Windows 2003 ends TOMORROW! Shortcuts to help

We've been talking about this day for a long time, and now the day is finally here. The July 14, 2015 deadline for the end of support forWindows Server 2003is tomorrow.You may be thinking it's too late to migrate, but it's not; this is a case that constitutes as "better late than never." So, if you're ready to take the plunge, you may be in need of some shortcuts, and here are a few: Measure Twice, Deploy Once - Take a solid inventory of which applications are running on each server. Most 2003 servers are not virtualized, thus many run a single application (email, CRM, finance) and are probably underutilized.Think Mobile - In our “there’s an app for that” business mentality, choosing a platform that simplifiesmobile integration—whether Web- or app-based—not only makes users happy, it also makes them more productive.Rent-a-Dev...
This topic first appeared in the Spiceworks Community

Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at your experience I am not sure if I should.
My key comes from the back of a laptop o so I guess that would be a W7
OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
Also could it be because we are attempting to get the ISO after the product became EOL ?
http://windows.microsoft.com/en-us/windows/lifecycle
Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
Will keep you posted

ANNOUNCE: JRockit 1.4.2 support for Windows XP/2003 x64 Edition

We are happy to announce that the 32-bit version of JRockit 1.4.2 is now supported on Windows XP and 2003 x64 Edition with Intel EM64T and compatible (including AMD Opteron) hardware.
Download here:
http://commerce.bea.com/products/weblogicjrockit/1.4.2/142_05.jsp
Updated support matrix:
http://e-docs.bea.com/wljrockit/docs142/certif.html
Note that WebLogic Server 8.1 SP4 is supported on Windows 2003 x64 Edition with this version of JRockit, details here:
http://e-docs.bea.com/platform/suppconfigs/configs81/winsvr2003_em64t/81sp4.html
Henrik Stahl
Product Manager

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

Cisco CSA Vista Beta - doesn't support sp2 for Windows 2003

I understand that in order for us to run this Beta release of CSA, in can only run under sp1 for Windows 2003 server. SP2 is our current standard
Anyone heard when we can expect it out for SP2?

I can't get it to install on the server comes up with an error what is the trick?

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
I have a customer having a world of issues getting the agent to start.
Jeff Courtade

No. 64bit support is not there for 2.1 agents on Windows.
-Subba

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Link to downlaod 10.2.0.4 for windows 2003 64-bit

hi, can you help me to provide link to download 10.2.0.4 for windows 2003 64-bit?
Thanks

On the OTN site there's a download page with 10.2.0.4 for Windows Vista x64 and Server 2008 x64, but for "plain" Windows x64, I see only the base 10.2.0.1 release.
So you would need a Patch Set for 10.2.0.1 -> 10.2.0.4.
For retrieving/being allowed to use Patch Set releases, you need Support (or SULS as the service is called in contractual terms) and a support web account.
Edited by: orafad on Jan 7, 2009 1:00 PM

Windows 2008? Mainstream Support of Windows 2003 ends13.07.2010

Hello,
Window Server 2008 for TVN is not supported at present - does any one know a date?
Mainstream Support of Windows 2003 is finished at 13. Juli 2010.
Afterwards there is "Extended Support".....
Best regards
Jürgen

Hi Jürgen,
I was in Nakisa HQ a couple of weeks ago and they said there was no date yet for this. It has to go through some certain tests in order to be certified on this platform. It may work but there is unlikely to be any support for any issues that are OS related.
Cheers,
Luke

RDP Hotfix for Windows 2003 SP2

What is the latest RDP hotfix for Windows 2003 SP2, we are having issues when we want the server to reboot and it just hangs. I remember that there was an hotfix for this issue. Our workaround is to use a remote shutdown command.
I believe they was an post-SP2 that kinda of helped in most cases.
Thanks in advance.

Hi,
Based on my search, the following articles will give you a hand:
Recommended hotfixes for Windows Server 2003 Service Pack 2-based server clusters
http://support.microsoft.com/kb/935640
Certain Windows Server 2003 hotfixes have been repackaged to be compatible with Windows Server 2003 Service Pack 2 (SP2)
http://support.microsoft.com/kb/932132
Meanwhile, I would require to analyze the cause of the unresponsiveness.
How To Troubleshoot Shutdown Problems in Windows Server 2003
http://support.microsoft.com/kb/324268
Sometimes, the clean-boot (MSCONFIG) will helps you to isolate the issue that might be caused by the third party software.
Thanks.

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PM

No, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine.

Oracle 10.2.0.3 Full Client for Windows 2003 32bit

Hello,
I know this is a stupid question, but I cannot seem to find the download for the full client for 10.2.0.3 for Windows 2003 32bit server. I have found the instant client, but not the full client.
Thanks in advance.
Brian

Hi Zekmoe,
do you have the PATCHES tab in Metalink (metalink.oracle.com)?
If not, please check your PROFILE in metalink - if PATCHES and UPDATES says: NO, then please contact your administrator (mentioned also in your PROFILE) to enable the patch download.
If you'll have the PATCHES tab then go to QUICK LINKS in the patch screen and choose Windows 32bit and 10.2.0.3
Hope this helps - kind regards
Mike

Where can I get Oracle database server 9i for windows 2003

Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
Laura

Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

Support for Windows 2003 on AGS 2.1

Similar Messages

Maybe you are looking for