Support functionality for ADR tunnelcode: how to get it?

Hi,
There seems to be a note for supporting ADR tunnel code. The only note I can find about this topic is note 1105036. However when looking in OSS this note doesn't exist anymore.
I hardly can't find any information. I t seems that it is possible to store the information at UN-number level and DG-master (transport approval tab). Can anybody help with this item? I need more information about the solution and the necessary notes.
Regards,
Paul

Hello
regarding the original question: sometimes it happens that an OSS note there you know the number can not be found any mor in the SAP marketplace. According to SAP the answer was: the correpodning change (adjustment etc.) is now part of a SP (Support package)..
To my knowledge this should be the case with the tunnel code.
Now lets come to you questions:
Are you sure the description of the transport type is the tunnel code?
I blieve this is not the case. There are these tunnel codes:
A
B
C
D
E
As normally on the road you have a number of materials packed on a truck my assumption is the route is found (if necessary) by taking account the worst case. It is clear that you need to know if there is a tunnel which you need pas on the road there a tunnel code need to be taken into account. Recently I have heard that actually not all tunnels in europe are classified.
- Is there a link with the tunnel code and the route in the sales document?
I am not so deep in DG handling so I would say : yes:
- Is the information printed on e.g. the delivery note?
In my opinon a must (that means must be orinted)
As ADR tunnel code is "old" you need to take a look which SP you have in EH&S. If you have the recent one: perfect. I have tried to find the informaton
I found this thread:
Tunnelcodes ADR2009 and this link:
http://www.technidata.de/Veranstaltungen/WebEx-CLEO-Update/TechniData_CLEO_Overview.pdf
So as the change is old and you have the recent SP you should be able to use the tunnel code in DG filling and on your DG documents
With best regards
C.B.

Similar Messages

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

I forgot security quotation for apple ID how i get it ???

I forgot security quotation for apple ID how i get it ???

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

I doubt you'll get an answer in a user forum, sorry. This forum is meant for users to help other users when they have problems that have to be solved. You should contact Adobe itself.

Since upgrading to 10.7.2 to use iCloud, i keep getting a message with ubd wants to use the login keychain, anyone for help to how to get rid of this...

since upgrading to 10.7.2 to use iCloud, i keep getting a window message with ubd wants to use the login keychain, i put the right password but it keeps coming back, anyone for help to how to get rid of this...

This is what I did and it seems to have worked so far. While that little annoying box is up you need to open the Keychain access by:
going to applications -> open utilities folder -> click to open Keychain Access
Now here is the stupid part, you have to continue to press the cancel button on the "ubd wants to use login keychain" box for the kaychain window to open. Once you have keychain access open go to:
the top of your monitor and select "Keychain Access" right next to the little apple logo -> click preferences in the options panel-> the preference box will open now -> click "Reset My Default Keychain" -> another box will pop up that says "Please enter your login password. This password will be used to create your new keychain" (of course this is assuming that you use a login password to access your mac) -> enter your login password and a box shows up that says "created a new empty 'Login' keychain"
After that you should be good to go. This new keychain you created with your login password overides the old keychain. The old keychain is still available in the Keychain's folder but is not being used and therefor can be deleted. All you have to do now is press ok, and your good. If the "ubd wants to use login keychain" box is still there after you reset your keychains just hit cancel and it should be gone for good or you can enter your login password.
Is this a fixall that will work forever? I have no idea but doing this has allowed me to access my network at work and all the servers I need to get to.
Oh and one more thing. You may need to press cancel on the ubd box throughout this entire process, I just gon in the habit of clicking a button hitting cancel on the ubd box and the new window would pop up.
I hope this helps you! Sorry if it's long, I was trying to be as detailed as possible to make it easier. Let me know how it goes.

Hi, My Ipad2 body got damage. I wouldlike to replace the my ipad2 body and front glass. I enquired in Apple retail shop (I-Machines-Bahrain), they don't have stock of ipad2 body. They asked me to contact apple support. Kindly advise me how to get body?

Hi, My Ipad2 body got damage. I wouldlike to replace the my ipad2 body and front glass. I enquired in Apple retail shop (I-Machines-Bahrain), they don't have stock of ipad2 body. They asked me to contact apple support. Kindly advise me how to get body?

We are not Apple Support. This is a user to user forum and Apple is not here. This link may provide the information you need to contact Apple Support:
http://www.apple.com/bh/sitemap/

How to create Support function for internal Class use

I have created a class to find the MoonRise and Set time. There is a java code available and I am translating it to Obj-C.
My problem is that for the calculation there are many support functions which is internally used. When I try to duplicate this as follows
-(double) frac:(double)x {
// returns the fractional part of x as used in minimoon and minisun
double a;
a = x - floor(x);
if (a < 0) a += 1;
return a;
-(void)minimoon:(double)t {
// takes t and returns the geocentric ra and dec in an array mooneq
// claimed good to 5' (angle) in ra and 1' in dec
// tallies with another approximate method and with ICE for a couple of dates
double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
//var mooneq = new Array;
L0 = frac(0.606433 + 1336.855225 * t); // mean longitude of moon
At this point it gives an error implicit declaration of function frac,
My question is how to create such helper functions which are used internally, actually there are many such functions where functionA call B which calls C.
Thanks
Raj

Here's yet another approach (creating a private category):
@interface MYClass (Private)
- (double)frac:(double)x;
@end
@implementation MYClass
- (void)minimoon:(double)t {
// takes t and returns the geocentric ra and dec in an array mooneq
// claimed good to 5' (angle) in ra and 1' in dec
// tallies with another approximate method and with ICE for a couple of dates
double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
//var mooneq = new Array;
L0 = [self frac:(0.606433 + 1336.855225 * t)]; // mean longitude of moon
- (double)frac:(double)x
// returns the fractional part of x as used in minimoon and minisun
double a;
a = x - floor(x);
if (a < 0) a += 1;
return a;
@end
<div class="jive-quote">rajkhand wrote:
I liked the first method as I don't have to change much of the java code.
I like it too. I use that very regularly (though I often use C++/Objective C++), since there is typically a lot of implementation in any class that does not need to be an ObjC instance method. This approach helps to reduce the object's interface to its essentials while keeping maintenance low.
I'll put all the helper functions above the implementation.
Is there a good book/web site where I can get such insight? I know C and Delphi/pascal
Well, Objective-C is a superset of C. If you're porting Java, you'll find protocols (ObjC) similar to interfaces (Java).
*Getting Started*
Apple's version of ObjC is different from others. For the language, Apple's docs are the standard (IMO):
Language:
http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/ObjC.pdf
If you are comfortable with C, this guide will help learning Objective-C quickly, though it has not been updated for (Apple's) Objective-C 2.0:
http://www.amazon.com/Objective-C-Pocket-Reference-Andrew-Duncan/dp/0596004230/r ef=sr14?ie=UTF8&s=books&qid=1245404236&sr=8-4
There are a few books on the ObjC2 language, but I have not read them (I just read Apple's docs for this).
OOP/Design:
http://developer.apple.com/documentation/Cocoa/Conceptual/OOPObjC/OOPObjC.pdf
Research
Good site for archives of tips, tricks, and even some hacks:
http://www.cocoadev.com/
Apple's lists (Cocoa, Xcode, ObjC, and specific technologies):
http://lists.apple.com/mailman/listinfo
This one sees the most traffic for Cocoa, and ObjC topics :
http://lists.apple.com/mailman/listinfo/cocoa-dev
Online archive for aforementioned Xcode and Cocoa list submissions:
http://www.cocoabuilder.com/
There are a lot of good sites/blogs out there as well.
Questions
Apple's lists (linked above) will typically yield good answers in a short time, you can also try here.
Thanks a million
Raj
You're Welcome,
J

Marydee-You asked me about resizing apps for jpeg images & how 2 get info

Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
Here's what I found in the iPhoto6 Help Menu:
Showing a photo's image and camera information
iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
To show image and camera information:
Select the photo and choose Photos > Get Info.
You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
Also please take a look at these prior discussions in iPhoto Forum/s:
http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
http://kstudio.net/re.html
Hope the above helps and good luck on this.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
Here's what I found in the iPhoto6 Help Menu:
Showing a photo's image and camera information
iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
To show image and camera information:
Select the photo and choose Photos > Get Info.
You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
Also please take a look at these prior discussions in iPhoto Forum/s:
http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
http://kstudio.net/re.html
Hope the above helps and good luck on this.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

One for the Tekkies: How to get this output using REGULAR EXPRESSIONS?

How to get the below output using REGULAR EXPRESSIONS??
SQL> ed
Wrote file afiedt.buf
1* CREATE TABLE cus___addresses (full_address VARCHAR2(200 BYTE))
SQL> /
Table created.
SQL> PROMPT Address Format is: House #/Housename, street, City, Zip Code, COUNTRY
House #/Housename, street, City, Zip Code, COUNTRY
SQL> INSERT INTO cus___addresses VALUES('1, 3rd street, Lansing, MI 49001, USA');
1 row created.
SQL> INSERT INTO cus___addresses VALUES('3B, fifth street, Clinton, OK 74103, USA');
1 row created.
SQL> INSERT INTO cus___addresses VALUES('Rose Villa, Stanton Grove, Murray, TN 37183, USA');
1 row created.
SQL> SELECT * FROM cus___addresses;
FULL_ADDRESS
1, 3rd street, Lansing, MI 49001, USA
3B, fifth street, Clinton, OK 74103, USA
Rose Villa, Stanton Grove, Murray, TN 37183, USA
SQL> The REG EXP query shouLd output the ZIP codes: i.e. 49001, 74103, 37183 in 3 rows.Edited by: user12240205 on Jun 18, 2012 3:19 AM

Hi,
user12240205 wrote:
... Frank, ʃʃp's method, I understand. But your method, although correct, I find it difficult to understand.
Could you explain how you did this?? What does '.*(\d{5})\D*' and '\1' mean???
Your method is better because it uses only ONE reg expression function. ʃʃp's uses 2.In Oracle 10.2 (I believe) and higher, '\d' is equivalent to '[[:digit:]]', and '\D' is equivalent to '[^[:digit:]]'. I find '\d' and '\D' easier to type, but there's nothing wrong with using '[[:digit:]]' and '[^[:digit:]]'.
'.*' means "0 or more of any character".
'\D*' means "0 or more non-digits".
The whole expression, '.*(\d{5})\D*' means:
a. 0 or more characters (any characters)
b. 5 digits
c. 0 or more non-digits.
'\1' is a Backreference . It means the sub-string that matched the pattern after the 1st '(', up to (but not including) its matching ')'. In this case, that means the sub-string that matched '\d{5}', or b. using the explanation immediately above.
So the entire REGEXP_REPLACE call means "When you see a sub-string consisting of a., follwed immediately by b., followed immedately by c., replace that sub-string with b. alone."

Work schedule: Approval field for a position - How to get it in ABAP?

Hi all,
could you please help me to find out how to get in a ABAP report the value of field Approval
(RHCSHORA-CPROZT) that is shown in the Work Schedule tab in OM (PPOSE tx), starting
from a position id? E.g. 100,00 (% of Standard value)
Thanks in advance, bye.
Angelo

Hi,
Are you asking about staffing Percentage?
Check Table HRP1001 with relation ship A008 .
get Weighting Percentage.
Regards,
Manoj.

Best file sizes for images and how they get loaded?

I have 103 images in an album in iPhoto that I'm sharing with my new Appletv. Whenever I check Preview for the Screen Saver it always seems to show me the same 6 images. When I go to view the photos directly under Computers it shows a few of them instantly (these do not display under Screen Saver) though the others take a while to load.
1. How much internal storage does the ATV have?
2. Is there an ideal file size each of these should be? Will images load quicker if I can get them smaller?
3. Why does the Screen Saver not show all of the images that also load instantly under Computer (I'm guessing they're cached)?
Thanks.

I havent heard of the appleTV deselecting items it deems to be too poor resolution.
Once it has a full cache (and it could support about 20000 large photos) you can expect that all images that show in iphoto also show in appletv.
Do they have some flagged designation? hidden?
Are they variant in file types? jpeg png?

Looking for Help on how to get wireless near computer lab

Ok Im Near A Computer Lab, And I want to get free wifi. I can log into the router from one of the computer lab's computers by the >192.168.1.1 and see passphrase, wep keys all that stuff...
My Question is how can I get internet at home from this router?
More info about router:
Firmware Version: v2.0.02
Mod: Wireless-N Broadband Router WRT160Nv2
Questions I need answered:
Basic Things Like, Mainly:
-What Adapter Do I Need? Is My Idea Plausible? What Information Do I need To Log Into This Internet connection from home? What Are The Consequences Of Leeching Internet this way? just stuff to get me going.
-If I Succeed In Getting Internet From The Computer Lab's router, Will "They" Be Able To See My Personal Email, What I search For on the internet, Downloads Things like this?
Other Maybe Useless Info: I have a old Wireless-G PCI Adapter Model No. WMP54G, I Have Not Tried But I Dont Think The Card Works And Is Broken Do To After Installed The Toolbar Icon Was Completly "Greyed Out"

I'm pretty sure the "computer lab" settings are configured and restricted that is why the default address is not working. Basically, if it is not your network more so if the network is secured, then definitely, you will not gonna be able to connect unless they had provide you the wireless settings like the SSID and the password. However though, if it is unsecured, then, that's no problem at all.
As with your wireless adapter, check on the links below:
Installing the WMP54G v4 for the first time
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=bf9526ef1fbf4b0e8dbaecb48950d7e8_3769.xml&pid=80&r...
Checking if the WMP54G v4 is Installed Properly
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3767

ITunes 12-Please please restore side bar functions for playlists -and how can i tell when and if it is safe to "eject" devices after synching

ITUNES 12-4points
1) Please restore the easy function whereby the side bar easily accommodates playlists
2) How do i know when devices can be ejected following synch--no visible drop down ?
3) How can i change the fonts and font sizes of the library-over and above the noddy large/small toggle in preferences
4) Look forward to a proper Apple update which includes full functions of iTunes radio. Hurry up with the latter-Spotify is overtaking you guys!

How do i know when devices can be ejected following synch--no visible drop down ?
I can only tell you based on what I see w/ my iPhone...
When I plug in my iPhone I get the following icon on the top bar:
If I click on that (that's when it turns blue), I get a sidebar. At the top I see this while it is syncing:
The circle-arrows spin. Once the sync is finished, I see this:
I then know the sync is over and I click on the Eject icon that replaced the circle-arrows.
Are you seeing something different?

TS4079 If I have a Facebook link contact for my boyfriend how to get Siri to remember who he is

How do I get Siri to remember to my boyfriend is a piece of Facebook link contact and it says that it does not allow her to do that

You could simply type "Contact itunes support" into the google search bar. This would give you the link to contact itunes support.
Or you could just click the word Support at the top of this page, then click the link under Contact Apple Support.

Exporting to PS CS3 I only have options for Tiff & PSD, how to get jpg?

Hi, I want to finish off editing in PS then resize to upload to Facebook.
I only have these 2 options to export to & when I get to PS & try to save as the dialog box doesn't give me a jpg option.
The file is flat & no saved alpha channels. Even when I try to save as jpg straight after exporting to PS there is no jpg option.
How can I save as jpg pls?
Thanks.

On Wed, Sep 16, 2009 at 10:53 AM, John McWilliams <[email protected]> said:
>
Glad to help, though of course there aren't many 18 bit images out there: sweet 16!
>
As an OT aside, I've never understood why PS doesn't automatically down-bit to 8 when you do a Save As to JPEG from a TIFF or PSD.
I believe it is possible to have a 16 bit JPEG if you use the JPEG
2000 specification. The original JPEG format that everything supports
is 8 bit.

Support functionality for ADR tunnelcode: how to get it?

Similar Messages

Maybe you are looking for