Support HTTP Live Streaming

Dose anyone know OSMF support the HTTP live streaming yet?
I am new to OSMF.  Any information will help!
Thanks!

Hey Cathy,
I am David from RealEyes!
I dont know if I am following your question completely. OSMF is for actionscript only so will never work natively on iOS except in an AIR for iOS application.
If you want to do something in the browser check out the Strobe player. It has HTML 5 fallback for iOS and can make for an easy to use video player for browsers (mobile or desktop). In the latest release they have a bunch of cool mobile stuff as well.
In the OSMF User Group last month they did a presentation on it that was recorded and talks about the HTML 5 support: http://osmf.groups.adobe.com/

Similar Messages

  • Does QTSS support HTTP Live Streaming?

    Hi all,
    I'm trying to create a streaming architecture based on HTTP Live Streaming.
    Does anyone know if QTSS supports the HTTP Live Streaming?
    And if not... is there any server that supports it?
    Thanks for the replies.

    Unfortunately, QTSS doesn't support HTTP Live Streaming. I wonder why Apple did not implement QTSS in Snow Leopard Server.
    However, Helix Universal Server from Real can do the trick.
    http://www.realnetworks.com/products-services/helix-server-proxy.aspx

  • How does HTTP live streaming support subtitles?

    Our app currently is on HTTP Live Streaming and everytime we scrub (fast forward or rewind) or if with low connection (buffering), the subtitle gets off-sync. Videos are segmented into 10 seconds so when you scrub, it jumps back to the nearest start of segment and when it does, it does not provide the exact and correct current playback time so we can't accurately compute for the offset, thus subtitle gets off synch.
    Our one solution is to use ID3 tagging when we encode our videos so we know exactly the time when segments starts. Unfortunately, there are not much encoding system that uses this yet.
    Any ideas on this?
    Thanks!

    Unfortunately, QTSS doesn't support HTTP Live Streaming. I wonder why Apple did not implement QTSS in Snow Leopard Server.
    However, Helix Universal Server from Real can do the trick.
    http://www.realnetworks.com/products-services/helix-server-proxy.aspx

  • Flash Player Support for HTTP Live Streaming?

    Does Flash Player 11 / Air for TV 3.0 support HTTP Live Streaming ?

    If you need help with posting messages in the forum there is a test forum available at http://forums.adobe.com/community/general/forum_comments/testing

  • Using http live streaming to stream data from a Webcam

    JavaFX 2.2 includes support for http live streaming: http://en.wikipedia.org/wiki/HTTP_Live_Streaming
    How could one create a http live stream from a Webcam and thereby enable a JavaFX application to view and hear the Webcam video in realtime?

    Bom Dia Saille,
    Eu acredito que o que você tenha hoje seja isso aqui (Desenho bem simplificado):
    Hoje o que você tem é o Aplicativo do Medidor + USB Driver controlando o seu medidor. Basicamente, sua aplciação está dividida em três camadas:
    Aplicação - Onde estão as funcionalidades principais do programa (interface com o usuário, apresentação de dados, geração de arquivos, etc.)
    VISA - Uma arquitetura de Software para controle de instrumentos. Basicamente, ele se comunica com o Driver USB para poder enviar e receber pacotes de dados através do barramento USB.
    Device Driver - Intruções de SW de baixo nível para controlar um periférico através de um barramento.
    No desenho, eu aponto duas camadas onde você pode tentar atuar para automatizar suas medições:
    Aplicação - Você pode usar o VI Server para controlar o Aplicativo do Medidor (Se este aplicativo tiver sido desenvolvido em LabVIEW, o que eu suponho ser verdade). No entanto é necessário saber se o desenvolvedor do produto permitiu isso (Veja Using VI Server to Pass Data Between a VI and a LabVIEW Executable). Outra alternativa é conversar com o fabricante para ver se ele desenvolveu alguma API (Application Programming Interface) para que você consiga controlar o instrumento diretamente.
    VISA - O LabVIEW Fornece uma API chamada NI-VISA para poder enviar e receber informações através de diversos barramentos (Veja Serial Instrument Control Tutorial)
    É possível acessar o Driver diretamente também, mas eu não recomendo. O resultado não compensa o esfroço!
    Espero ter esclarecido suas dúvidas e espero que você tenha sucesso na sua aplicação!!
    Atenciosamente.
    Felipe Flores
    Engenharia de Aplicações
    National Instruments Brasil

  • Apple iPhone Http Live Streaming in Flash (Free OSMF library released)

    Hello everyone, recently I've read (http://www.flashcomguru.com/index.cfm...) that Matthew Kaufman has developed an AS3 library which adds support for Apple HTTP Live Streaming (HLS) to OSMF and released it under the MPL open-source license.
    HLS (wich is a proposed RFC open standard) is the required protocol to  deliver VOD or live stream to Apple devices and it's also supported on  Android; having it supported in a flash based media-player can make you  reach both desktop and mobile users using just HLS, without the need to  offer different distribution method.
    Benefits:
    Less complexity for content distributor and lower distribution costs!
    What about integrating HLS in StrobeMediaPlayback? ...maybe using the cited MPL AS3 library, I'm not an AS expert and the library lack documentation but
    it should be possible, isn't it?

    You need an iPhone Developer Account to download ... if you can't see the link then you don't have access or aren't logged in.

  • Mediafilesegmenter - HTTP Live Streaming

    I am confused, it can't be this difficult to create HTTP Live Streams.
    I have 10.7 on my Mac Pro it has variantplaylistcreator and mediafilesegmenter installed in /usr/bin. Variantplaylistcreator works, mediafilesegmenter crashes. My MacBook Pro has 10.8, the tools are absent. I luckily have a MacBook with 10.6, on this variantplaylistcreator crashes, mediafilesegmenter works.
    The job option Prepare for HTTP LIve Streaming in Compressor 4 fails dismally it won't work with existing files and doesn't seem to want to create anything when you start from scratch with a video.
    At the moment I run a script on the MacBook, followed by one on the MacPro to create the necessary files from the already created h.264 videos.
    I have an active iOS Developer programme, the "latest" tools are nowhere to be found.
    I cannot believe it is this difficult to deliver video, in the Apple approved fashion, for the iOS platform.
    Anyone got any better experiences?

    This is the iPhone (not iPad), user-to-user tech support (not developers) forum. You're much more likely to get help in the dev forum:
    https://devforums.apple.com/community/iphone

  • HTTP Live Streaming and 3rd party servers.

    I have a working HTTP Live Streaming (HLS) setup on my Snow Leopard server, where I have the live stream embedded in a Safari page via HTML5. I want to setup a very basic kind of CDN with something like a Microsoft 2003 Server, where the encoding and segmenting of the stream is handled by the Snow Leopard Server  but the hosting / distribution of the stream / site is handled by the Microsoft server.
    I'm looking for documentation on how to go about doing this. I know that it's possible to configure HLS to work with commercial CDNs like Amazon Cloudfront and Akamai, but my needs are much smaller as I'm looking to serve very few clients.
    Thanks

    https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware

  • HTTP Live Streaming for Apple IOS devices

    HI,
    We have installed FMS 4.5, including Apache 2.2, on a 64-bit Windows 2008 R2 server following the instructions given in the video that can be viewed here:
    http://www.adobe.com/devnet/flashmediaserver/articles/install-verify.html
    Browsing to the test page for the server works fine for HTTP Dynamic Streaming and RTMP Dynamic Streaming samples.  However, when we try to use the HTTP Live streaming samples on the test web page on an iPad via AnyConnect, we only see a blank page with a small Abobe Flash icon in the top left hand corner which is basically saying that Flash has been detected on the page and is not supported by the iPad.
    The above video shows HLS working on an iPad with no additional installation steps.  Can anyone hep?

    Found the answer
    The home page on the Adobe server has an error in its javascript.
    if (uagent.search('iphone') != -1 || uagent.search('ipad') != -1) {
    should be
    if (uagent.search('iPhone') != -1 || uagent.search('iPad') != -1) {
    ....capital P's.

  • How to create encrypted HTTP Live Streaming Videos?

    Does Compressor4 have any features (or scripts that can be run post-compression) to create encrypted HTTP Live Streaming Videos?
    It works great for creating UNencrypted ones, but I need to make some encrypted ones also.

    I found it out: You have to use "New Batch From Template" and choose “HTTP Live Streaming". Then you have to create a new folder where the output goes to in the "Information" window. There is also a checkbox which instructs Compressor to create a "readme.html".
    Then a folder for every quality setting is created, where all the .ts files go to and the playlist files as well. Works like a charm, as soon as you found out how to do it.

  • How to publish http live stream

    When I use Adobe Flash Media Server 4.5  publish http live stream. I found a message from Server Log of Manage Servers of Adobe Flash Media Administrator Console. It says that "Failed to record live stream (disk quota exceeded)."  How can I do to solve the question?

    I didn't get your query. Are you looking for the restrictions/time limits on different versions ?
    http://www.adobe.com/products/flashmediaserver/compare/

  • Where are HTTP Live Streaming Tools

    I am trying to install mediastreamvalidator, mediastreamsegmenter, mediafilesegmenter tools for my mac machine version 10.6.8 
    As mentioned in this link about downloading required tools 
    http://developer.apple.com/library/mac/#documentation/NetworkingInternet/Concept ual/StreamingMediaGuide/UsingHTTPLiveStreaming/UsingHTTPLiveStreaming.html 
    As above artical says: 
    "The tools are frequently updated, so you should download the current version of the HTTP Live Streaming Tools from the Apple Developer website. You can access them if you are a member of the iPhone Developer Program. One way to navigate to the tools is to log onto connect.apple.com, then click iPhone under the Downloads heading."
    After logging in to site connect.apple.com under download heading there is no tab named iPhone, i am unable to find this link.
    If these tools are stored else where can some one please provide me the updated link? 
    I need these command lines for developing HLS serve.
    Thanks

    You need an iPhone Developer Account to download ... if you can't see the link then you don't have access or aren't logged in.

  • Using http live streaming

    Hello.  For a project I am working on, I need to design a secure streaming system for audio files such that they can be streamed but not downloaded (due to copy right issues).  I was looking into http live streaming as a possible solution.  However, I am new to developing web applications and the like and was hoping for some help, maybe links to sample code, how to use http live streaming for my server/in my code, etc.  In particular, I was hopping to make the streaming available to firefox, safari, and apple mobile devices.  I am hoping to develop this using html 5.
    Thanks.

    I have same issue with 64bit Safari 5.1 and 10.6.8.
    Video plays if not protected. If Protected says "Loading" and never plays.
    With 32bit Safari looks the same but...
    There is a login window behind the Safari window. If I find it and login, mp4 plays.
    Is quite annoying. Any fixes?

  • Use HTTP Dynamic Streaming (HDS) and HTTP Live Streaming (HLS) to serve live streams to clients over HTTP

    I have created a live stream of a video and it gets stored in live folder.
    Now i need to use HTTP Dynamic Streaming (HDS) and HTTP Live Streaming (HLS) to serve live streams to clients over HTTP, publish the streams to the HTTP Live Packager service on Flash Media Server.
    So what necessary steps do I  need to follow to do that ??

    You need to generate a manifest file using Configurator tool and placed it under the webroot directory.
    C:\Program Files\Adobe\Flash Media Server 4.5\tools\f4mconfig\configurator

  • HTTP Live Streaming Problem

    Dear iPhone Dev members.
    I'm streaming live media over HTTP to iPhone 3.0 from my web server.
    I read draft-pantos-http-live-streaming-01.txt and create test files.
    I succeeded in the video playback a normal playlist(i.m3u8 and i-1.ts) very well.
    But my iPhone could not play a encriptyed media file(j.m3u8 and j-1.ts).
    Though iPhone acquires data by HTTP requests, it returns to Safari's screen at once.
    How I can resolve this?
    Thank you.
    # I do not have a Segmenter beta.
    # 'https://connect.apple.com/cgi-bin/WebObjects/MemberSite.woa/wa/getSoftware?bun dleID=20333' is not available ;-<
    -----i.m3u8-----
    #EXTM3U
    #EXT-X-MEDIA-SEQUENCE:1
    #EXT-X-ALLOW-CACHE:NO
    #EXT-X-TARGETDURATION:30
    #EXTINF:30,
    /i-1.ts
    #EXT-X-ENDLIST
    i.m3u8 ... Playlist file.
    i-1.ts ... Media files.
    -----j.m3u8-----
    #EXTM3U
    #EXT-X-MEDIA-SEQUENCE:1
    #EXT-X-ALLOW-CACHE:NO
    #EXT-X-TARGETDURATION:30
    #EXT-X-KEY:METHOD=AES-128,URI="/key.dat"
    #EXTINF:30,
    /j-1.ts
    #EXT-X-ENDLIST
    i.m3u8 ... Playlist file with EXT-X-KEY.
    j-1.ts ... Encrypted media files.
    key.dat ... Key file.
    ### Dump my key file(NOTICE: od command's format is little endian)
    % od -xv key.dat
    0000000 0201 0403 0605 0807 0201 0403 0605 0807
    0000020
    ### Create encrypted media files.
    % openssl enc -aes-128-cbc -e -in i-1.ts -out j-1.ts \
    -p -nosalt \
    -iv 00000000000000000000000000000001 \
    -K 01020304050607080102030405060708 \
    -nopad

    sorry, you're in the wrong forum. i believe you need to go to developer.apple.com.

Maybe you are looking for