Support issue for interview purpose yea

Hi Experts,
I am fresher to FICO i have 6 months experience. right now m trying to search job on the basis of FICO.
could u please send me the support issue with soulution. bcos i need to tell the same thing in the interview panel.
Please send me the details for support issues which are good to impress interview panel.
Regards
Vinay

Hi Hassib
Not sure what exactly you mean by "maximum number of sensors (application monitoring interfaces) does ASA  support"? there is no real limit on number of interfaces that can be monitored using the IPS module. All you need to ensure is you the right kind of traffic to the IPS so it does not get overwhlemed with a lot of traffic. This link should give the maximum thorughput supported:
http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html
Hope this helps!
Thanks and Regards,
Prapanch

Similar Messages

  • Critical scenario for interview purpose

    Hi guru's,
    Plz send me some  Critical Scenario for  Interview purpose vth solution.
    Thanks for all the help in advance.
    Regards
    Reddy.

    Hi Pv,
    Send me ur mail id i will forward the basic pdf doc.
    regards ,
    venkat

  • Adobe fails to respond to support issue for 30 days.

    I moved to a new MacBookPro. I attempted to register my CS6 Design & Web Premium to which I upgraded in April 2013 for this new machine. The license says it is good on one work machine and one home machine. I took my old MacBook Pro home.
    The Adobe site shows my old CS 5.5 and CS 5 licenses, but not CS6. The site does not accept my serial number for the CS6 registration. Clearly it was registered or it would not have worked on my old machine.
    After hours on phone hold and simultaneous support chat hold (Adobe's web site always says that a support agent is available, until you start a chat session and they leave you hanging until it times out).
    On January 4, 2014 after four hours of attempts I finally had a chat session. The support  person started a support case that required me to upload a copy of my certificate with serial number and receipts from my dealer for the purchase. The site says that the goal is a four hour turn around and that I have five days to respond to Adobes contact.
    In fact Adobe has NOT touched this case in 30 days. They have not responded to repeated attempts to contact them. My dealer, Apple Specialist, was unable to get them to respond.
    I am dead in the water here. I can't get work done.
    I think that this is probably the worst service ever and can't get through to anyone. It was disappointing that the last upgrade did not include a current version of Acrobat. What is more infuriating is the lack of listing this, a current product, on Adobe's support page the and circular process that constantly takes you back to the same page.
    Here is the note that the Adobe support person entered on January 4.
    Hello Mitch,
    Thank you for contacting Adobe customer service.
    In this case you will have to provide the POP(proof of purchase) to get the serial number.
    I will leave this case open from my end which will reflect under your Adobe account after 20-30 minutes once you end this chat.
    You can submit the proof later by login to your Adobe account.
    You can find the open case by clicking on 'My Open Support Cases' after you login and we will reply you back with the resolution v
    ia email since we will need to verify the proof.
    It was a pleasure to assist you, please do get back to us if you have any further issues. We are available 24 hours, 7days a week.
    Goodbye.
    All of the above is untrue. The have all of the support information they need, but have totally failed to contact me or enter any information into the case file. The case status is open and says "Open - Pending Adobe Response." Yet, no response in a month.
    Here is all of my correspondence to Adobe:
    Notes from Customer
    Sunday, February 2, 2014 2:11:12 PM PST
    This issue is nearly 30 days old and you have yet to respond.
    Notes from Customer
    Tuesday, January 21, 2014 6:55:11 AM PST
    Once again here is the certificate I received from Adobe, but the serial number is deemed invalid when I attempt to register it. The
    serial number is: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX.
    I need this up and running NOW.
    I have attempted to contact you many times on your chat function and it times out even though your site says "agent available." Subs
    equent attempts yield a message that says "Invalid Chat Session Cookie."
    This is very frustrating.
    All I want to do is move to a new computer. I have the discs, the serial number, but for some reason, your system doesn't show that
    I have registered this product, even though it must be registered to work and I ran it from April 3, 2013 until December 31, 2013.
    Let's get this resolved at once.
    Notes from Customer
    Monday, January 20, 2014 12:49:27 PM PST
    I still have not heard back from you after 16 days. This is NOT very good customer service.
    Notes from Customer
    Saturday, January 4, 2014 3:55:26 PM PST
    This is the third of three supporting documents.
    Notes from Customer
    Saturday, January 4, 2014 3:54:38 PM PST
    This is the second of three supporting documents.
    Notes from Customer
    Saturday, January 4, 2014 3:52:55 PM PST
    I tried entering the Serial Number shown on the Software License Certificate when I attempted to register with this number the respo
    nse was "please enter a valid serial number." The Mac license I have is: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX.
    I tried to FTP a zip file with my Software License Certificate, and my receipt(s). I first received the wrong product, which was exc
    hanged for the correct one. Unfortunately, the password provided to me was rejected by the server. I created a zip archive of the th
    ree files, but that cannot be uploaded with this form.
    In light of this, I am attaching one document at a time and will attempt to send all three.
    I would like to make sure my software works and the registration shows up in my account (the one attached to [email protected]).
    Thank you for your prompt attention to this.
    Mitch
    Notes to Customer
    Saturday, January 4, 2014 12:30:14 PM PST
    Hello Mitch,
    Thank you for contacting Adobe customer service.
    In this case you will have to provide the POP(proof of purchase) to get the serial number.
    I will leave this case open from my end which will reflect under your Adobe account after 20-30 minutes once you end this chat.
    You can submit the proof later by login to your Adobe account.
    You can find the open case by clicking on 'My Open Support Cases' after you login and we will reply you back with the resolution v
    ia email since we will need to verify the proof.
    It was a pleasure to assist you, please do get back to us if you have any further issues. We are available 24 hours, 7days a week.
    Goodbye.
    Can anyone suggest how to get through to these people?
    Thanks in advance.
    mitch

    If you are in Windows (which we don't know), you can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement

  • Support issue for non-English characters (in html forms)

    Hi group!
    I just want to post an issue here and see if anyone else has the same problem. First off, Im running Windows XP MCE but the French version (not the english version). This may help find out where the problem really is.
    Second, I know a bit of html and such, and I'm referring to HTML Character entities for this thread, there's a quite complete list here for reference: http://www.faqs.org/docs/htmltut/characterentitiesfamsupp69.html
    I noticed that some, not all, non-English characters written in a textarea (which is, basically, a multi-lined input box) doesnt pass well or at all to the server when sending the form from Safari. Most of the time, the content of the text area is reduced to the beginning and ends where the first accentued character is met.
    The most used French accents (é, à) are usually well interpreted (but may, once in a while, produce that bug too) by safari, but ô and î doesnt do that well.
    Oddly, this bug doesnt happen all the time and doesnt "crash" in the same manner everytime.
    So I started a thread just to see if there's anyone else having issues with any non-english characters mostly in forms. Probably flash/shockwave does work, but I'm not sure- I have not tested yet.
    Acer Aspire 5044   Windows XP   Turion 1.8GHz, 1Gb SDRam, ATI 200M xpress

    Yes, it is a known issue. I also noticed that it sometimes works, but most of the time it does not. It will hopefully be solved in the future. According to http://www.apple.com/safari/download/ changes that will come include:
    # Support for International users
    # International text input methods
    # Advanced text (contextual forms, international scripts)
    Sony Vaio   Windows XP  

  • Do I have a tech support issue for all you guys...

         Hey all.  First time poster to the MSI boards.  About a month ago I bought a 2nd XFX GeForce 7950GT M570 Extreme Edition video card to go SLI with my gaming rig.  So one weekend I install SLI in my system.  I set the SLI switch card that came with my MSI mobo to SLI, plug the 2 cards in, fire up the system, log into Windows and...hey look.  My expansion PCI sound card is no longer recognized by the system (my Sound Blaster Audigy 2 ZS Gamer [which was my card about a month ago] is now not a Sound Blaster Audigy ZS 2 according to Windows it is now a "Multimedia Audio Controller" not a "PCI Multimedia Audio Controller" according to Windows) and Windows wants to reinstall the audio even though the driver is still clearly there in the system and recognized. 
         So I go to install the latest Audigy 2 driver for Windows and I get this error message: "Setup cannot detect a supported product within your system.  Please ensure you have properly installed the product and then run Setup again.  Setup will exit."  Since then I have also tried all the following troubleshooting remedies:
         - Tried installing the driver through pointing Windows directly to the .inf file for the sound card.  Result: Failed!  Error message reads as follows: "Windows cannot verify the hardware that goes with this driver.  If you continue you greatly risk causing extreme corruption within Windows and extreme instability within Windows.  Do you want to continue?  Yes or no?"
         - Tried moving the sound card to all 3 PCI slots on my motherboard.  Result: Failed!  Windows can't properly detect the sound card no matter PCI slot its in.
         - Bought a new audio card (a Sound Blaster X-Fi Xtreme Gamer instead of the old Audigy 2 ZS Gamer) and put that in the system: Result: Failed!  Windows can't detect the new card properly either.
         - Flashed the BIOS on my motherboard to the newest version.  Result: Failed...to fix the problem!  Windows still couldn't detect the card.
         - Uninstalled motherboard and ForceWare drivers and tried to install the system going motherboard driver, audio driver, graphics driver.  Result: Failed!  Windows still wouldn't detect the card properly nor would let the driver operate.
         - Installed latest motherboard driver over the old one.  Result: Failed!  Windows still wouldn't detect it. 
         So after all this...does anybody here have any other ideas?  My specs are in my signature.  Thanks.  Out! 

    Well, just changed out the Enermax PSU with a Thermaltake Toughpower 750W and...failed!  The system still will not detect the sound card properly to install it.  It's like I always believed though...that the PSU had nothing to do with this at all!  I knew it had nothing to do with this, but in the sense of full scale troubleshooting it was another step and even though it didn't lead anywhere it further singles out the problem which I have always believed to be a BIOS/motherboard/Windows problem.  In other words, this MSI board I have cannot do SLI and run an expansion sound card at the same time but can only do SLI under the onboard sound chip.  That's right.  I bet there's not one board member here using my motherboard, SLI and an expansion sound card at the same time in their system.  Again, to play it this is a motherboard design weakness.  And a reinstallation of Windows won't fix this either because of what I have described.  Guess I got to get another motherboard and try that cause as gamer law goes, "Never use onboard sound with a gaming rig otherwise its not a real gaming rig."  Out!

  • 2004s support issue for Taskbinder package

    Hi all
    I am using the following code
    TaskBinder.getCurrentTask().getWebContextAdapter().getHttpServletResponse());
    above code works fine in SP15 but it's giving error in 2004s(unable to resovle getWebContextAdapter).
    So I just want to know Taskbinder is still supported in 2004s, if not what is alternative.
    Regards
    Keerthi

    Hi Keerthi,
    Check
    Panic - WebContextAdapter is depracted - no more cookies now?
    Best regards, Maksim Rashchynski.

  • Does ASR5000 support Radius for management?

    Hello,
    I'm trying to find out if Cisco ASR5K supports radius for management purposes? I have been able to find references to TACACS+  but nothing for radius.
    thanks,
    Aqdas

    You may have already figured out. To the continuity of the thread, I am providing this answer.
    ASR5K supports only TACACS+ AAA (so far) for management user access.
    Regards
    Aneesh

  • Description of key figure for multi language support issue.

    Hi Experts,
    Have a good day ahead!!
    Custom key figure description multi for the language support issue
    The key figure is created in English  language and description also in English.
    When I have logged in to English language and checked the report in Bex ,description of key figure is available.
    But when I log in to other language(German, Spanish Portuguese and etc) environment the description in Bex rport of key figure is showing blank
    In rsa1 in both English and other(German, Spanish Portuguese and etc)  environments key figure description is okay and correctly displaying.
    Please post me your inputs on the same.
    Thanks in advance!!
    Regards
    Priya.

    Hi Prasanth,
    This are the key figures XPRECIO: Transactional Price and XPRECLIST: Price list, its maintained in RSA1 tcode at info object level .
    These two KF descriptions are maintained in English, its working fine when I login into SAP Bex analyzer with English language and its not showing the description for the languages (German, Spanish, Portuguese and etc).
    Its need to be displayed in when login into SAP Bex analyzer with language German, Spanish, Portuguese and etc.
    Regards
    Priya

  • HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

    I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

    You stated; "Mountain Lion disables OfficeMac"
    That is not true.
    Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
    Allan

  • Backflush issue for porduction supporting document

    Hi,
    When a PdO with back-flush items is reported as complete, the back-flush items are automatically issued to it.  There must a supporting document for this.  Do you know what it is?  Or is back-flush issuance handled when closing the period?
    Thanks,
    Mike

    Hallo Mike,
    In my SAP B1 2007A SP01 PL09 is OINM a real table with its own Transaction Number
    [http://img714.imageshack.us/img714/1520/oinm.png|http://img714.imageshack.us/img714/1520/oinm.png]
    Regards,
    D.

  • Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

    Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

    Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
    Thanks,
    Sreenivas

    Hi Sreenivas,
    I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore.  Your Discussion will most likely get reported as non-specific and get removed.  If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
    There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed.  There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having.  If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
    Regards, Mike
    SAP Customer Experience Group - CEG (and a Moderator)

  • Where is Support for Windows Update issues for Windows Server?

    Where is Support for Windows Update Issues for Windows Server?
    Windows Update keeps prompting to install an important update, KB2871690 and continually fails with error code 0x800f922
    I ran all the fixes I can find, it still fails.
    I also tried the manual install, fails.
    Microsoft used to provide no charge support for Windows Update issues. They additionally offer online fixes  for other versions of windows, but not server, and I can't find a forum.
    I also cannot ignore the update, it continually prompts.
    I ran the windowsupdate.diagcab and it continually states it fixes Windows Update error 0x80070057, by resetting windows update data store. It further states it fixes Problems installing recent updates.
    But it doesn't. I've run it 50 times, and it says the same thing every time.
    So there is no support for windows update, and no support for windowsupdate.diagcab.
    What's the deal?

    I've done the SFC/ SCANNOW and DISM
    here is the cbs.log
    What are we looking for?
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~BT\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360'. -
    CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$Windows.~BT\sources" - CDISMManager::LoadLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Executing command line: X:\$Windows.~BT\sources\dism.exe  /logpath:X:\$Windows.~BT\sources\Panther\cbs.log
    /scratchdir:X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360 /image:X:\ /is-serviceable
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\FolderProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\WimProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\WimProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\VHDProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\VHDProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\ImagingProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\ImagingProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\CompatProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to load WimManager. Try running from the Deployment Tools Command Prompt. If the issue persists, ensure that wimgapi.dll
    and wimserv.exe are up to date.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to add any commands.
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 physical location path: X:\ - CDISMManager::CreateImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Copying DISM from "X:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD"
    - CDISMManager::LoadRemoteImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Image Session: PID=1644 TID=1656 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting SystemPath to X:\ - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting Windows folder to X:\Windows - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Manager: PID=1612 TID=1616 Image session successfully loaded from the temporary location: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD
    - CDISMManager::CreateImageSession
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Setting SystemPath to X:\ - CDISMOSServiceManager::SetSystemPath
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Target image information: OS Version=6.2.9200.16384, Image architecture=amd64
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting the collection of providers from an image provider store type. -
    CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Get the registry path to the SOFTWARE hive located at X:\Windows\system32\config\SOFTWARE
    and determine if it is loaded. - CDISMOSServiceManager::DetermineBootDrive
    2013-12-04 19:48:22, Info                  DISM   DISM Driver Manager: PID=1644 TID=1656 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002)
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x80004002)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Current image session is [OFFLINE] - CTransmogManager::GetMode
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Determined WinDir path = [X:\Windows] - CTransmogManager::GetWinDirPath
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 GetProductType: ProductType = [ServerNT] - CTransmogManager::GetProductType
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type: [ServerNT] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type ServerNT : [Yes] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AppxManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AppxManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AssocManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AssocManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Processing the top level command token(is-serviceable). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Finalizing CBS core. - CDISMPackageManager::Finalize
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM OS Provider: PID=1644 TID=1672 Successfully unloaded all registry hives. - CDISMOSServiceManager::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

  • My free trial has expired a week into the trial. I have contacted support and they haven't solved the issue. Stated to use forum to solve my license issue for this computer.

    My free trial has expired a week into the trial. I have contacted support and they haven't solved the issue. Stated to use forum to solve my license issue for this computer.

    Did you have an Adobe trial running on this same computer before?  Maybe your previous trial was used for 3 weeks and then you uninstalled it?  If so, you're only eligible for a 1 week trial on this computer.
    Nancy O.

  • Calendar malfunction - calendar keeps freezing and displaying text I copied for another purpose - any advice?

    My 6-month old macbook air's calendar keeps freezing up.  when I open calendar, it displays across the top of the calendar some text I copied for another purpose and which I pasted into a word document yesterday.  When this happens there's nothing I can do to escape it -- all commands result in the "thud" tone.  So I keep having to force quit calendar. 
    Any advice?

    Hi Dylan2412,
    According to your description, you'd like to pass the ComboBox.Text to the second form's TextBox.
    In Form1:
    private void button1_Click(object sender, EventArgs e)
    Form2 f2 = new Form2(this.comboBox1.Text); //pass the comboBox1.Text
    f2.Show();
    In Form2:
    public Form2(string s) //get the string;
    InitializeComponent();
    this.textBox1.Text = s;
    You could get the comBoBox refer to this sample above.
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Dithering no longer works under 1.4.2

    I had this posted in the AWT forum and I was suggested that the issue was better suited to the Java 2D forum: I am trying to convert a jpeg to a 1 bit per pixel Buffered image. The current implementation is working fine under 1.3.1_05 but not under a

  • Someone please help me!! i'm tryin to download software 5.0 on my blackberry tour 9630

    Hi can some please help me i'm tryin to download software 5.0 on my blackberry 9630 i see it as an option in my desktop manager but everytime i click next it just won't start the upgrade!! why??? please someone help thanks

  • ORA-00600 after patch 6890831 on Windows Vista

    Hi there. I've just applied patch 6890831 and now the database fails to open. I'm using Oracle 11.1.0.6 on Windows Vista. It's installed on my laptop, having 2.5gz Dual and 4gb RAM Here's a partial of the ALERT_LOG file: starting up 1 dispatcher(s) f

  • Question about dataset in demo photo Gallery V.2

    So I'm going to try and be as specific as possible. I'm trying to use the code on the Spry demo page to create a gallery and I'm stuck on how to get it to load my .xml files instead of the china, egypt, and paris files. The only reference I see to a

  • Put objects on artboard that are enclosed by a path in one layer

    I have several maps of the world with various adminstrative boarders. The states/provinces their own sub-layer but the counties/districts are not within layers of the corresponding state/provinces in which they are contained. Basically, I'd like to p