Support of Field Diagnostic Alarms according FF-912 with NI-FBUS Configurator 3.2.3
I tried to monitor Field Diagnostic Alarms according FF-912 from a FF H1 device with NI-FBUS Configurator 3.2.3 and the Alarm Monitor Utility.
Standard Block Alarms e.g. in case of a parameter change are monitored in the Alarm Monitor.
Field Diagnostic Alarms according FF-912 are not monitored.
Are Field Diagnostic Alarms according FF-912 supported by the NI-FBUS Configurator 3.2.3. or is something special to do to enable the monitoring.
If not, which tools or host systems are available to monitor such alarms ?
Solved!
Go to Solution.
Alarm Monitor in NI-FBUS software does not Field Diagnostic Alarms. You can try using NI-FBUS C API nifWaitAlert2 to monitor such alarm. The detail description of the API can be found in NI-FBUS Hardware and Software User Manual Chapter 6.
Feilian (Vince) Shen
Similar Messages
-
Creating support message field reported by doesn't fill
Hi colleagues,
When I create a support message field reported by doesn't fill automatically.
I think that I've completed all required steps in order these fields were filled automatically. Fields sold-to party and support team are filled automatically, they work ok.
The steps that I've checked:
- The support message is created successfully from satellite message(SID=DES_01). The user which creates this message is zprueba5 exists with profiles: SAP_ALL, SAP_NEW at the satellite system.
-In the solution manager system(SID=SMG), transaction ib52 for the satellite system is filled with partners: employee responsible, sold-to party and system administrator.
- In the solution manager system(SID=SMG), zprueba5 exists with profiles: SAP_ALL, SAP_NEW.
- Transaction bp, zprueba5 user contains BP roles: Business Partner, Employee, Bill-To Party, Financial Services and at the tab "Identification":
External BP Number: SMG 010 ZPRUEBA5
ID Type Description Identification number
CRM001 External System Identifier DES_01 0020281686 100 ZPRUEBA5
CRM001 External System Identifier SMG 0020276689 010 ZPRUEBA5
So, In the solution manager system(SID=SMG), crm_dno_monitor transaction when I open the support message just created from satellite system, I have an error because reported by field isn't filled.
Please could you help me?
Thanks and Regards
Raul AguilarHi Nikhil,
At this message I'm going to reply your last two replies.
1.- You typed me "In ib52 select both the system simultaneously and then go to->parner and assign proper bp no for the respective partner function. You need to do it for every system may be users are same.
I hope you have maintained proper access sequence i.e. via ibase."
For each SAP System that I've defined at SAP Solution Manager, at ib52 transaction I've defined the three roles that IMG activity documentation types:
Assign business partners with the following functions to the new iBase component systems:
Administrator
Key User
Sold-to Party
SAP Solution Manager Implementation Guide->SAP Solution Manager(SP 17)->Configuration->Basic Settings->Standard Configuration of Basic Settings->Solution Manager->iBase->Assign Business Partners to iBase Components ->transaction Change iBase (IB52), enter in field Installed Base '1' and I select the SAP System->Goto -> Partner
Function Partner
00000014 Employee Responsible 298
00000001 Sold-To Party 295
SLFN0001 System Administrator 295
2.- You typed me "Select you partner determination procedure and double click on "User interface setting" here select appropriate partner functions and assign all of them in ibase as I said in above reply.
You must not be getting reported by partner function. Take out System administrator. Motivate by assigning points."
My Partner Determ. Proc. is SLFN0001, so I double click on User interface setting like you explained me, adn now appears:
Header Screen:
Sequence and Functions for (main) Partner Displayed
Partner Function1 00000001 Sold-To Party (CRM)
Partner Function2 SLFN0002 Reported by (CRM)
Partner Function3 SLFN0003 Support Team (CRM)
Partner Function4 SLFN0004 Message Processor (CRM)
But now I don't understand if at ib52 transaction I've to add any role or if from "User interface setting" I've to delete any Partner Function. Could you detail me when you type "You must not be getting reported by partner function. Take out System administrator", please?
Regards,
Raul . -
Does PWA not support Notes field entry?
Does PWA not support Notes field update? We have tasks in PWA that we would like for people to be able to put notes in the notes field but in edit move, you cannot enter data into it. I have search for "Pwa support of notes field"
but no hits. If it does not support it, do you know of a potential alternative solution?
Cletus51PWA is an acronym for Project Web App, or Project Web Access if you go back to Project Server 2007/3/2. So to be clear, Dale is correct in terms of editing the notes field in the Details view of each assignment, and Kihop is correct in
terms that you cannot edit (though you can display) notes in a view in the Schedule PDP. You can also view the Project Summary Notes field in the Project Center, but I haven't used this functionality since Project Server 2007.
HTH....
Ben Howard [MVP] | web |
blog | book -
is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?
No
-
hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock itTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple -
My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?
Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.
-
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?
I created a PDF with several fields and exported it.
Then I tried to open it with Firefox and the fields didn't appear.
But it works OK with Adobe Acrobat.
Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?Adobe software reads form fields. The rules for how to do form fields are a part of the PDF standard (a book available to anyone) but some companies ignore it and others do half a job. To be safe, use only Adobe Reader. And beware of browsers that ignore Adobe Reader even if you have it.
-
Why Apple don't systematically support the latest version of OpenGL and OpenCL with a new OS release?
Maybe because it's necessary to build on a version that's been out long enough to be stable before releasing? Who knows?
Are there specific features you're missing? -
Tables listed in Result set field selction tab against Standard Data Objects in MDO configuration
On what basis are the tables gettting filled in the Result set field selction tab against Standard Data Objects in MDO configuration.
Only the handler class is specified before it gets filled.
Vivek.
Tags edited by: Michael ApplebyHi Vivek,
I would also recommend providing the version of the product either in the body of your discussion or in the tags (or both, preferred). If you are installing it on SMP 2.3 or some other platform, please add that as well. I have updated your tags and assigned the correct Category. Since there are so many different technologies in SAP for Mobile, tags and Categories help the helpers find your post and help you find a solution.
Thanks, Mike -
Can somebody please help me, i can not work on my websites anymore. Thanks !!
ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603 -
Is there a number for us to call Apple support urgently.. I need to contact with them soonest to waiver off the amount..
Trying many ways to contact Apple, but looks like they are not contactable...It's not very clear exactly what your problem is, but if it's to do with any sort of purchase other than in iTunes or renewal your best bet is to ring the Online Store at the number given at bottom left of this page.
If it's an iTunes purchase go to https://expresslane.apple.com ; select 'All Products and Services' in the first column, 'iTunes' in the second column and then 'iTunes Store' in the third column. -
Is the iPhone alarm supposed to sync with iwatch? I can't get any alarm notifications from my iPhone to my watch. Do I have to just set up whole new alarms specifically in my watch?
Yes, they should sync. Check the Watch app on the iPhone and look at Calendar - make sure it's set to Mirror my phone
If it still doesn't work, reset the Watch, restart the phone and re-pair the Watch - fixes a few glitches -
I am tryng to open a raw file from a Nikon 810 but won't open. Says RAW DOESN'T SUPPORT CAMERA MODEL. I re installed nx2 with error code u43m1d207. How do I open a file.
you can use the dng converter if updating your adobe program(s) fails.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7 -
LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings re
LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings reset and running a test catalog a raw image when opened in develop will when imediately going back to library view show a significant color shift in red, orange and purple but only in images with significant content in those colors. at first the culprit appeared to be camera calibration default but not reproducable. The problem exists even when opening older images from months ago? Also if second screen running in loupe mode the image is not shifted.
Any ideas please
DaveJim01403, Geoff and others...I'm new here so I'll need a little time The thread is very interesting, populated by serious mature people, how refreshing! It clearly is part of what i'm experiencing and is answered answered here...thank you. My main problem is still the significant color shift between develope and library modules. I'll attach one from each so you and others can see. Unfortunately the library version is the bad one so printing is now very problematic...Note, this occurs in either single or with second monitor on the library version is displayed. I have reset virtually everything and wonder if a cache is not updating or color space is not matching? A symptom/detail worth noting, when switching to library mode, the correct image is displayed for about a second then it jumps to what you see in the examples. As if the library module starts to rendering from develope settings then jumps tback to the original inedited preview??
Maybe just go back to 3.6 and tread water till 4.1 is fixed?
Dave
Maybe you are looking for
-
I can no longer view NEW pictures on a certain website
Before the update I could view all the pictures on a website ( http://manga.animea.net/night-walk-chapter-3-page-7.html ). However, after the installation, I havent been able to view ANY new pictures and rarley can I view the old ones which ive alrea
-
Insert , Update & Delete Not working in BDB Berkley Database
Hi, Anybody has used Oracle ADF & BDB ,to insert/ update & delete? imported db.jar,dbexample.jar,sqlite.jar ,derby.jar. still not working (Only Query working) Pls lets us know
-
Deadlock bettween two SSLEngines
This may be related to my previous post or may be a different issue. I have the same implementation of my SSLEngine running in client and server...here is what occurs between the two SSLEngines client writes 100 bytes, server receives server writes 1
-
How to get focus on a TextInput control without mouse starting an app
Hi everyone, I have a TextInput control and I should to be able to edit it as soon as I start my app without using mouse. My issue is to have the cursor in the TextInput without using the mouse. Unfortunately setFocus() function isn' t enough <?xml v
-
Hello All. I want to carry the basic JIT configuration In SAP. Pls let me know the detail steps / procedure to doing so... Solution will be rewarded. Regards,, Subhash