Support of R12 specific setups for Financials

Hi,
It is not fully clear to me to what extent the new EBS R12 setups for Financials (e.g. E-Tax, SLA, Ledgers, Legal Entities) are already supported by iSetup, or what the planning is. Can you tell something about this ?
Thanks, Jouke

Here is the complete list of setup entities that are supported in R12. We are working on publishing the entire list of setup entities supported in R12 to metalink. Please review the list and if some important setup entities are missing, please log a request to get them included.
Financials Setup
Accounts Payable
Reporting Entities
Financials Options
Aging Periods
Distribution Sets
Invoice Tolerances
Invoice Approvals
Payables Options
Payables Payment Terms
Special Calendars
Withholding Tax
Payment Process Profile
Expense Templates
Accounts Receivable
Aging Buckets
Auto Cash Rule Sets
Invoice Grouping Rules
Invoicing Rules
Line Ordering Rules
Memo Lines
Customer Profile Classes
Approval User Limits
Auto Accounting
Collectors
Receivables Payment Terms
Receipt Classes and Methods
Receipt Sources
Receivables Activities
Receivables System Options
Receivables Transaction Types
Statement Cycles
Receivables Territories
Transaction Sources
Cash Management
Bank Account Uses
Bank Accounts
Payment Documents
System Parameters
Transaction Codes
Credit Management
Credit Management Automation Rules
Credit Management Check Lists
Credit Management Scoring Model
Credit Management Setup Options
Fixed Assets
Asset Keywords
Asset Book Controls
Asset Depreciation Calendars
Asset Categories
Asset Prorate Conventions
Fiscal Years
Asset Locations
Asset Quick Codes
Asset System Controls
General Ledger
Budgets
Code Combinations
Chart Of Accounts
Conversion Rate Types
Currencies
Accounting Calendars
Statistical Units of Measure
Accounting Setups
Data Access Sets
Encumbrance Types
Ledger Sets
Journal Reversal Criteria
Public Sector Financials
Budget Organizations
Summary Templates
Budgetary Control Groups
Transaction Codes

Similar Messages

  • Specific Setup for My Computer?

    Howdy all,
    I've been reading all sorts of recommendations on how to setup your scratch disks in premiere and all I seem to find is a bunch of varying opinions from what seems to be very knowledgeable sources.  It seems that scratch disk setup is somewhat dependable on your specific system.
    So I was hoping I could tell y'all exactly what I'll be working with and maybe get some good recommendations.  I've just recently installed Premeire Pro CS6 and have played around with some dinky sequences and videos just to familiarize myself with the program more but I would really like to get all my settings tweaked to the most efficient modifications before I start any real projects that will be saved.
    Forgive me if anyone feels this question has already been answered elsewhere, but after days of reading I came to the understanding that some of the broad, generic answers seemed ambiguous to someone who isn't the best at figuring out technical situations.
    Ok, so here's what I'm working with, and I'm already aware that it isn't the "ideal" computer but it's what I've got to work with and I think it will be sufficient for my amateurish/hobbyist needs:
    My computer is an:
    ASUS U52F-BBL9
    System Type:  x64-based PC
    Processor:  Intel(R) Core(TM) i5 CPU  m 460 @ 2.53 GHz  2 Core(s), 4 Logical Processor(s)
    RAM:  4.00 GB  (But I'm in the process of upgrading to 8 GB, which means I might have more questions in future)
    Hard Drive:  500 GB (450 GB is free space)
    OS: Windows 7
    I also have 1 external USB 3.0 Hard Drive 1 TB (Seagate FreeAgent GoFlex) but I use it with my USB 2.0 ports
    Should I utilize my external hard drive, or save everything directly to my computer.  And if I should use both hard drives, how should I divide them up.  The scratch disk tab gives options to save to 4 differenet locations, a place for:
    Captured Video, Captured Audio, Video Previews, Video Audio Previews
    All most all the files I will be working with will be imported video filed that come from my non-HD video camera or other various video files.  A very small amount of the video I will be working with will be captured from my very old mini-DV camcorder.
    I already know some video geniuses will jump on this and set me straight, so thanks in advance.
    PS- unrelated
    Also, I am currently on the free trial I downloaded and will need to purchase before the end of this month.  I was hoping to purchase the disc version vs downloaded version and was wondering if I could just use the registration info and serial numbers from my box to activate the already installed CS6 on my computer, or will I have to uninstall then reinstall the new box version.

    Dear Harm or somebody else,
    I've been studying the chart and posts on the thread you suggested and remember reading over it before.  One reason I was hesitant to just accept it and go with the reccomendatins was because I wasn't sure if the "2 Disk System" recommendations you are advising are for internal hard drives only or can be adopted for my USB external hard drive also. 
    Some other websites suggest using my portable hard drive, others say if it's only a USB 2.0 I'm probably better off just using my internal hard drive. Also, I'm embarrased to admitt it, but much of the terminology in the the chart, notes, and threads are Greek to me.
    So forgive me if this is rude for lack of effort on my end, but if you do recommend using my external hard drive in the "2-Disk" setup, and you were on my computer starting a new project in CS6 right now, what disk would you set the following drop down options to on the Scratch Disk Tab:
    Captured Video - Default = Same as Project
    Captured Audio - Default = Same as Project
    Video Previews - Default = Same as Project
    Audio Previews - Default = Same as Project
    Should I leave everything default, change it all to my portable hard drive, some of it to portable hard drive, or what?
    And also, I'm not sure what Media Cache and Page Files Are or if they're relevant in my situation.
    Sorry to keep bothering y'all with these stupid questions but I've been reading for the last week advice about this from all over the internet so I'm just gonna take whatever info I get from this last post and make it work even if it is baffling to my Premeire-ignorant brain. Thanks

  • Proxy setup for R12

    Hi ,
    Someone setup Proxy during e-business suite R12 upgrade. What is drawback of setting proxy ?
    Thanks,

    The proxy you provide during R12 installation is for "Oracle Configuration Manager" and it is used for authentication. There is no drawback in using a proxy server.
    OCM ( Oracle Configuration Manager ) and My Oracle Support : FAQ and Troubleshooting [ID 369619.1]
    Oracle Configuration Manager and E-Business Suite Release 12 Release Notes [ID 406369.1]
    Thanks,
    Hussein

  • Implementing DBI for Financials in R12

    Hi,
    We are currently in the process of implementing DBI for Financials for our client.
    Could someone help me understand how to implement the manager reporting setup? Escpecially the mapping of company costcenters to HR company cost center organizations.
    I would appreciate an example very much.

    For setting up mananger reporting in R12, you will have to do the following:
    1) make sure that the user is associated with a person
    2) user is a manager in the hr hierarchy i.e user has other people reporting to him/her
    3) define the cost centers in the FDHM in DBI using the DBI admin responsibility
    4) set up the same cost centers as organizations in HR using HRMS responsibility and have the user set up as manager reporting for the cost centers you want him/her to have access.
    5) after completing these steps when you run the financials dashbord you should see the name of the user in the drop down for manager
    --manager reporting is required only for P&L dashboards.
    For others(other than P&L) including payables, provide access as Company Cost Center Role, Fund Manager, Financial Analyst using DBI admin responsibilty (Data Security: Delegation> Administer Company and Cost Center Security).
    If you have a metalink account, here is the link to the whitepaper on setting up manager reporting.
    https://metalink.oracle.com/metalink/plsql/f?p=200:101:7931058767591059787::::P101_URL:PL_DB_Whitepaper.pdf
    Thanks,
    Paami.

  • Re: latest product-specific patches for R12.1.3

    Hi ,
    We want the latest product-specific patches for R12.1.3
    Regards .

    Please refer note. Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
    Execute patchsets.sh script, it will list your current patchset for each module and what is the latest patchset available on My Oracle Support

  • Reverse proxy setup for EBS R12.1.1

    We have an external DMZ server configured for oracle ebs r12.1.1. The URL is http://testerp.mydomain.com:8003.
    Can you please provide a link that shows step by step setup of Reverse proxy for the above URL to access the application.
    I already have the metalink notes that says about DMZ setup for oracle ebs. I actually am looking for step by step setup for the reverse proxy using oracle application server 10g. Please help. Thanks.

    Roy, I have already gone through that document, it is actually showing how to install and configure webcache 10g for oracle ebs r12.
    It also says the features that oracle applicaiton server web cache provides like,
    •Load Balance
    •Reverse Proxy
    •Failover and Surge Protection to minimize downtime
    •Personalize Attributes for Caching
    BUT IT IS NOT MENTIONING HOW TO CONFIGURE THE 'REVERSE PROXY' FOR THE ORACLE EBS EXTERNAL APPLICATION SERVER ON DMZ.

  • closed Support for FIX protocol in OSB for Financials

    Hi,
    I am trying to find out the FIX protocol support in OSB and found out the fix adapter guide in the following location:
    http://download.oracle.com/docs/cd/E13185_01/fmd/docs10gr3/pdf/FIX.pdf
    From this document i am unable to get how this can be used in OSB for financials. If anybody has more documentation/tutorial for FIX support, please give me your insights.
    Thanks
    Siva
    Edited by: user13061887 on 03-May-2010 01:33

    I don't understand the issue at hand. Did you download the OSB financial edition. It comes with a design time which will allow you to create catridges for fix. Once the cartridge is configured, you have to export the cartridge for java class. these java classes are imported into OSB and invoked via java callout.
    Let me know if you need more information.
    Manoj

  • Split setup for EBS R12

    Hi all,
    I want to have a split setup for EBS. Say I have 2 servers, and I will use 1 for the DB and the other for Apps.
    Though I have not tried it yet, because we only have 1 test server to practise.
    My question is....is my understanding correct? That to install a split config of EBS.
    1. I have to run RAPIDWIZ on the 1st machine(server) and install the DB tier. and
    2. Run RAPIDWIZ on the 2nd machine and install the Apps tier.
    Thanks
    Edited by: yxes2009 on Jan 20, 2009 5:07 AM

    You can use a special Rapid Install startup option to upgrade an existing database node or Applications node to a new technology stack, without having to perform a complete system upgrade. With this option, you can install new ORACLE_HOMEs and generate configuration files (using AutoConfig) that will switch your existing system to use the upgraded components. In addition to running Rapid Install, there are additional tasks associated with a complete technology stack upgrade.
    Note: For the initial release of Oracle Applications Release 12, no technology stack upgrade options are applicable, since the latest core components have been included as part of the release. Options to upgrade will be provided as new components become available and are certified.
    Technology Stack means:
    1) Oracle 10g Database home (10g ORACLE_HOME)
    2) Application Tier homes (10.1.2 and 10.1.3 AS)
    Refer to (Chapter 4 - Installing Technology Stack Components) of the Installation manual, it is explained properly there.

  • OPM INVENTORY SETUP FOR R12

    Can I get the OPM Inventory setups for Release 12..
    Please send to the following email id.
    [email protected]

    Hi Dinesh
    Could you pls send BR100 and testscript of OPM to me also, we are working on a steel company now, very appreciate your help...
    my mail: [email protected]
    Thanks, Chang Shucheng

  • Adding new categories to Financial Categories in DBI for Financials

    Hi,
    Has anyone defined new financial categories as part of setups for R12 DBI for Financials?
    Even if new financials categories can be added to the Fianancial lookup for Finacial catgeories, can this cahnge be reflected in standard dashboards?

    When opening a photo in my "File Info" categories I have : Description, Adobe Stock Photos, IPTC Contact, IPTC Image, IPTC Content, IPTC Status, and Advanced.  Can I add: Camera Data 1, Camera Data  2, and History to that also?  If so, how do I do that?
    Adobe calls these categories Custom File Info Panels.  They are scripts that you "install" simply by copying them into a special folder.  PSE 6 for Windows supports custom panels, and I'm reasonably confident PSE 6 Mac does too.
    On Windows, you put the scripts into:
    C:\Program Files\Common Files\Adobe\XMP\Custom File Info Panels
    I don't have a Mac, but I found this at IPTC.org:
    On a Macintosh OSX system the custom panel files may be installed in either of the following
    locations:{Root Volume} /Library/Application Support/Adobe/XMP/Custom File Info Panels{Home Directory}/Users/<user name>/Library/Application Support/
    Adobe/XMP/Custom File Info Panels
    As for the particular scripts you need, it seams strange your PSE doesn't have Camera Data1 and Camera Data 2 -- they're in the Windows version. Did you try reinstalling?  I don't know what History is.
    (It's confusing for people to determine which panels are "standard" with PSE.   The Mac and Windows versions are different, and it also depends on which other Adobe applications you've installed.)

  • Any Specific patches for General Ledger on Release 12.1.3

    All -
    I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
    But are there any specific patches for General Ledger Module on release *12.1.3*
    Please advise on this
    Regards
    VSH

    I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
    But are there any specific patches for General Ledger Module on release *12.1.3*
    Please advise on thisPlease see the docs under the "2. Recommended Patching" section in (EBS R12 Period Close Advisor: General Ledger [ID 1359476.1]).
    Also, please the docs referenced in these docs.
    Planning Your Oracle E-Business Suite Upgrade from Release 11i to Release 12.1 [ID 987516.1]
    E-Business Suite: Oracle Financial Control Information Center [ID 1207527.1] -- GENERAL LEDGER
    Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
    My Oracle Support > Patches & Updates > Recommended/Latest R12 Patches
    Thanks,
    Hussein

  • Firefox is not loading specific websites for me. Sites like Facebook, Ebay, Google, and Netflix refuse to open, or even acknowledge me pressing the Enter key

    Firefox is not loading specific websites for me. Sites like Facebook, Ebay, Google, and Netflix refuse to open, or even acknowledge me pressing the Enter key when I type in the address or click a link to that site. Practically every other site works perfectly fine. I did not change any settings or download any new addons prior to this problem, it just started happening. I have done everything I can find in the forums; resetting firefox, clearing cache and cookies, making network settings use no proxy, reinstalling, and today I uninstalled Firefox, updated and scanned my computer with all 3 software I use (AVG, Malwarebytes, and Spybot), found no issues, restarted my computer, and reinstalled a freshly downloaded Firefox setup without importing any settings or doing anything other than a totally clean install, and still nothing. Chrome and IE still are able to access every site perfectly fine. I have no idea what the issue is or how to fix it, as I've tried everything I know and could research.

    Hi There,
    Sorry to hear of your issue. I found a great article for you to read and explain how to fix your issue. I hope this hope :)
    Robert
    Click on the link below
    [[https://support.mozilla.org/en-US/kb/firefox-and-other-browsers-cant-load-websites ]]

  • Why won't Apple Mobile Device Support install with itunes setup??

    Why won't Apple Mobile Device Support install with itunes setup?? I keep trying to reinstall, and installs everything but Apple Mobile Device Support. How come. will someone please help me?? I updated windows, and thoroughly removed everything before i reinstalled itunes. I don't know why it's Apple Mobile Device Support isn't going on there. HELP! Is there anyway i can just download and install Apple Mobile Device Support by itself???!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
    tt2

  • Best "Easy Setup" for AVCHD .mts files

    I'm on a MacBook Pro in 10.5.8 with FCP 7, all footage is shot by a Canon HF S100 at 1920x1080 60i. Is there a best way to set up the Easy Setup for the AVCHD files?
    I currently have it as:
    Format: (all)
    Rate: (all rates)
    Use: Custom Setup
    Sequence Preset: HDV 1080i60
    Capture Preset: HDV Apple ProRes 422
    Device Control: non-controllable device
    Video Playback: none
    Audio Playback: Default.
    Is there a better way to do it than this?
    Thanks,
    Dave

    Yup,
    It costs but it's supposed to be very worth it on saved time and trouble.
    http://www.clipwrap.com
    From the website:
    rewraps - doesn't transcode
    ClipWrap rewraps the video samples from your existing m2t, mts, m2ts files without re-encoding them. This means blazingly fast convert speeds and no image degradation.
    Transcodes too!
    Need your files in ProRes, AIC, DNxHD or DVCProHD? ClipWrap can seamlessly convert your files. Don't worry about frame size changes, gamma shifts, or any of the other problems resulting from mismatched settings - ClipWrap chooses all those based on the source file's format.
    Automatic format detection
    ClipWrap speaks your camera's language so you don't have to. It automatically parses the file's format and chooses the proper output format, so there's no hassle trying to determine the proper settings (frame rate, image size, gamma levels, etc).
    Full timecode support
    Timecode is recreated in the new QuickTime movie, so you can recapture from tape later if necessary.
    Supports HDV and AVCHD formats
    Now you're not limited to specific HDV or AVCHD cameras, you can rest assured your files will be compatible with FCP when it comes time to edit.

  • VPN Client and Setup for RV042

    Is there a definitive setup for a small VPN using the RV042?
    Situation is 2 remote users wish to get access to a non server (W7P) pc to access files.
    The end point doesn't have a static IP but I've put in a DYNDNS.org so it reports back the IP and I can access the router at least from outside.
    I can setup VPN users but is there more to do?
    Wish to use QVPN client or advise alternative.
    Appreciate all input.
    Thanks
    Bruce

    Bruce,
    QuickVPN normally works well for what you wish to do. Make sure that the Windows Firewall is ON in Windows 7 and Windows Vista clients. Turn off all antivirus and third party firewall software as well at least until you have verified that you have a successful connection. It is very easy to set up, just create a username and password in the router. If you run into trouble, post here or call your local Small Business Support Center:
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Maybe you are looking for

  • My feedback on Acrobat XI new extract capabilities

    I'm   specialized in winter sport equipment review (journalist) and nowadays I get about every datas in pdf catalogs. I extract every specs, technos and texts (100+ brand catalogs a year). My present Acrobat is pro 9 and extract feature is rarely ok.

  • Presets in CS3

    So I've used Premiere a lot in the passed but I was using an older version and only just recently got up to CS3 and am still trying to figure out all the changes.  I'm doing a cartoon in Flash but I'm using Premiere to cut all the scenes together and

  • Possible Damage to Display/Screen following a dropped Macbook - Help!

    We have a 13-inch, 1st generation MacBook (purchased around May '06) which has survived a few minor drops relatively unscathed. This evening, our one-year old pushed the Macbook off of our bed (about a 2 1/2 - 3 foot drop) onto the stained concrete f

  • Longrunning jobs/Queries in oracle

    Hi , How to find long running jobs/queries which are executing less than 6 seconds. The primary criterion for any operation to appear in v$session_longops is to run more than 6 seconds. I want to find out the queries which are executing more than 1 s

  • HTTP request(LoadURL) program problem(file connectable but not readable)

    I have the following code: import java.nio.*; import java.nio.channels.*; import java.nio.charset.*; import java.io.*; import java.net.*; import java.util.*; public class LoadURL {      public LoadURL(String urlRequest) {           SocketChannel sock