Support pack has error status

Hi All,
Could you please let me know if any last updated support pack has error status can we apply spam/saint update ??
Regards,
Pankaj

couldn't understand your query....
Explain in brief about your query/issue?
Regards,
Nick Loy

Similar Messages

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

** BPM Error - Msg has error status on oubound side

Hi Friends,
I am doing BPM scenario. (Receive Step --> Transformation Step --> In Block (For each) Synchronous Send Step ). That's all BPM design.
We have created Server prox (inbound Proxy) in ABAP, it receives PO details and return Sales order no. Coding has been written inside Proxy. If we test Proxy in ABAP, it is working fine.
The required PO data we pass from JDBC. Receive step receives the whole message (It may contain 1 or more PO). In Transformation step, we split message using multiline checkbox( One message per 1 PO).
Message is processed successfully upto this step. In the Synchronous send step, it throws an error.
In SXMB_MONI, 3 messages are generated. In the first message itself, in the outbound status column 'Red Flag' is coming, (but processed successfully). The error is 'Message has error Status on outbound side'. Inside the message 'PE' adapter is in grey color.
So, what could be the problem ..?
Kindly reply, friends.
Kind Regards,
Jegatheeswaran P.

Hi Jegatheeswaran,
Take the Message after transformation and try to test your synchronous service with this message,
if u r using any web service you can use Altova (XML SPY) to test your service with the data after
transformation.
If it does not show any problem then try to see you have build your BPM Properly (Press F7 to test For any syntactical error).
You can also go to SXI_CACHE to see if your Workflow does have status 0 .
To get Exact error Message . Click on PE ->goto->ThechnicalSetting->select synchronous call->click on content tab->and go on navigating you will find detailed exception.
Reward Points IF Helpful
Thanks
Sunil Singh

Message has error status on outbd side

Hi,
I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
Any clues!!!!!!!!!!
Regards
Swatantra

Hi Vijay,
Cross check whether you have done these:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps.
Regards.
Praveen

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

Support Pack upgrade error in Import Phase

Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
 | ######################################
Thanks and Regards,
Sankar
SAP BASIS Consultant

Hi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
 Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
 The function module "POSS_UIREQ_OPT_SUBMIT" is called,
 but cannot be found in the library.
 Error in the ABAP Application Program
 The current ABAP program "SAPLSTXC" had to be terminated because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
 not caught in
 procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 The program "SAPLSTXC" contains the CALL FUNCTION statement.
 The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
 No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
 All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
 upper/lower case and underscores ("_").
 or
b) Transport error
c) In the case of an enqueue/dequeue module,
 the lock object may not have been activated
 (ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant

Urgent help CRM Support Pack Upg error sapevt.exe SAP_TRIGGER_RDDIMPDP

Hi All,
SP for CTS add-on in CRM qa 7.02 stuck. Please help as soon as possible. Aborted and tried to run in CI instance still stuck.
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O CRQ S      20150424123453              DDIC         SAPCRMQAS 20150424123452988
START tp_getprots          CRQ S      20150424123453              DDIC         SAPCRMQAS 20150424123452988
STOP tp_getprots          CRQ S      20150424123456              DDIC         SAPCRMQAS 20150424123452988
STOP DISTRIBUTION OF DD-O CRQ S      20150424123456              DDIC         SAPCRMQAS 20150424123452988
INFO TBATG CONVERSION OF CRQ N      not needed                  DDIC         SAPCRMQAS 20150424123452988
INFO: apg locked (anticipatory program generation)
START MOVE NAMETABS        CRQ 6      20150424123456              DDIC         SAPCRMQAS 20150424123452988
START tp_getprots          CRQ P      20150424123456              DDIC         SAPCRMQAS 20150424123452988
STOP tp_getprots          CRQ P      20150424123457              DDIC         SAPCRMQAS 20150424123452988
STOP MOVE NAMETABS        CRQ 6      20150424123457              DDIC         SAPCRMQAS 20150424123452988
START MAIN IMPORT          CRQ I      20150424123457              DDIC         SAPCRMQAS 20150424123452988
INFO: apg unlocked (anticipatory program generation)
STOP MAIN IMPORT          CRQ I      20150424123518              DDIC         SAPCRMQAS 20150424123452988
INFO TBATG CREATION OF EN CRQ n      not needed                  DDIC         SAPCRMQAS 20150424123452988
INFO EXECUTION OF STANDAR CRQ 9      not needed: sxpra execution is switched off              DDIC         SAPCRMQAS 20150424123452988
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all              CRQ   0000 20150424123519              DDIC         SAPCRMQAS 20150424123452988
START EXECUTION OF REPORTS CRQ R      20150424123525              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424123525              DDIC         SAPCRMQAS
START imp subset           CRQ        20150424123543              APServiceCRQ SAPCRQAPP
START DD IMPORT            CRQ H      20150424123543              APServiceCRQ SAPCRQAPP
STOP DD IMPORT            CRQ H      20150424123618              APServiceCRQ SAPCRQAPP
START DD ACTIVATION        CRQ A      20150424123618              APServiceCRQ SAPCRQAPP
WARNING: System CRQ. Warning.        20150424123635 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=CRQ
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
WARNING: System CRQ. Warning.        20150424123918 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=CRQ
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
START tp_getprots          CRQ J      20150424123918              APServiceCRQ SAPCRQAPP
START tp_getprots          CRQ R      20150424125606              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424130559              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424131530              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424132551              DDIC         SAPCRQAPP
Services file entries
sapmsCRQ 3600/tcp # SAP System Messaging Service Port
saphostctrl 1128/tcp # SAPHostControl over SOAP/HTTP
saphostctrl 1128/udp # SAPHostControl over SOAP/HTTP
saphostctrls 1129/tcp # SAPHostControl over SOAP/HTTPS
saphostctrls 1129/udp # SAPHostControl over SOAP/HTTPS
sapmsCRQ 3603/tcp # SAP System Message Server Port
sapmsSHDCRQ             3606/tcp #Upgrade shadow instance
sapdp06             3206/tcp #Upgrade shadow instance
sapgw06             3306/tcp #Upgrade shadow instance
Thanks,
Kavitha Rajan

Hi Kavitha,
Please refer to the KBAs specified below which can assist you in resolving the issue.
2074984 - RDDIMPDP job cannot be started due to duplicated services
1702079 - Background jobs cannot be started, exit code 7 in SLOG during Support Package/transport                  import
1913676 - Troubleshooting guide for Support Package / Add-Ons Installations errors during the main import 'IMPORT_PROPER' phase in SPAM or SAINT
Thank You.
Regards,
Deepika

Message has error status on outbound side

Hi All.
I'm doing file to file scenario.configured everything, showing success message in SXMB_MONI but with error flag at outbound status
My R/3 system is : SAP ERP Central Component 5.0
But I'm unable to find the related product for this system from the following systems
SAP R/3 4.5, 4.6 and 4.7version
I have selected : SAP R/3 ENTERPRISE, 47X110 IDS on idesecc
my question is whether i created technical system wrong or any other mistake i have done for this problem?
pls suggest a suitable solution for my problem.
thanks,
Manoj

Hi,
My message contains following information.
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000036231</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>CREMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPTX1</SAP:SNDPOR>
<SAP:SNDPRN>LS_SAP</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPRD1</SAP:RCVPOR>
<SAP:RCVPRN>LS_SAP800</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS />
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY>B07DF8A0A03811DBADD00003BAF07785</SAP:ARCKEY>
</SAP:IDocOutbound>
I'm unable to find where is this SAPTX1 .
Actually i created SAPRD1 port in XI pointing to R/3 and SAPXD1 port in SAP pointing to XI
SAP logical system as LS_SAP800 but idon't from where LS_SAP is coming
Thanks
manoj.

Send email when report has error status

Hi Gurus,
Is there any possible way through which i can send an email only when we come across an error report in B2B 10g.
Note: Error report means when the status of the report shows error at the console.
Any suggestions will be appreciated.
Regards
Ayush

Hi Ayush,
If I got it right then you want to send Email notification in case an error occurs in Oracle B2B. You can definitely do it.
Monitor the error queue (by default IP_IN_Queue) and dequeue messages for B2BERRORUSER. using a BPEL/java utility. Using same utilities you may send Email notification.
Please let us know if you are lokking for something else.
Regards,
Anuj

Error status on outbound side

Hi experts,
I am in JDBC to IDOC scenario and right now i face following error in SXI_MONITOR (black and white flag in status field BUT Red flag in outbound status):
"Message has error status on outbound side"
This is a heavy interface (up to 8MB) but, in the past, we did not receive this error. I saw that there is an entry in SM58 from the PIAFUSER that says "Lock table overflow"
Thus, I set the parameter enque/tablesize up to 8192 MB but after restarting the system it did not work either, a new entry in SM58 is shown.
If i analyse the runtime tab of the response of the message i can see
<SAP:AdapterStatus>007</SAP:AdapterStatus> --> for an erroneous interface execution (payload=7,2MB)
<SAP:AdapterStatus>006</SAP:AdapterStatus> --> for a successful execution (payload 6.5 MB)
Can anyone plz, help me on this?
I cannot explain why we did not face this in the past.
Can you please explain how the lock table works? and what does the overflow means?
Thanks a lot in advance and best regards,
David

Hi Sai,
Ive checked what you mentioned but cannot see the point there. Maybe you can help me:
Enqueue Operations 847
rejected 17
Error occured 0
Dequeue Operations 604
Error occured 0
Dequeue All Operations 661
Cleanup Operations 0
Backup Operations 1
Read Operations 21
Compress Operations 0
Verify Operations 0
Records written 58408
to the backup file 2
Maximum Number of Lock Owners 58406
Maximum Fill level 4
Current Fill Level 0
Maximum Number of Lock Arguments 58406
Maximum Fill level 14
Current Fill Level 0
Maximum Number of Lock Entries 58406
Maximum Fill level 14
Current Fill Level 0
Update; Fill Level at Maximum 1
Current Fill Level 0
Time in Lock Table /Seconds 0.073970s
Wait for Lock Table /Seconds 1.691441s
Time in Lock Server /Seconds 0.000000s
Besides, i dont think it is gonna be a matter of disk spaces as all of them have, at least, 3.0 Gb of free space.
Any other clue? I increased the enque/table_size up to 65 MB and the lock table overflow in SM58 still remains!!!
Thanks a lot and best regards,
David

Error during application of scm 7.0 support pack

While applying support pack to our SCM 7.0 system (New Installation),
We encountered a SPAM error in xpra_execution phase, due to automatic
termination of job RDDEXECL scheduled by user id DDIC on client 000.
The details of the error are:
Message id: Brain
Message number : 366
Message type: A
Error: Error during SID assignment for characteristic 0REQUID (current
value 2)
We had a look at few notes mentioned by SAP support on 1319241. which
specifies a solution as
u201CIf you encounter the error message above, please run the Elementary
test - Compare Number Range and Maximum SID - for Master Data 0REQUID
in transaction RSRV. When it turns red, the error can be corrected by
pressing the "Correct Error" button.u201D
But we are already getting the light as green in the elementary test
for the Master Data 0REQUID in transaction RSRV, though we still
execute the same and problem is still the same i.e. RDDEXECL
program/job is getting terminated.
Regards
Edited by: pranav kumar on Feb 25, 2011 8:20 AM

Hi SM
Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
Regards
Pranav

Support pack has error status

Similar Messages

Maybe you are looking for