Support pack issues

Hi All,
      After the SP15 was applied many of the data sources became inactive or not in Sync with the source system.
      We had to open up the production system, activate the data source and replicate the meta data.
      this is also a common scenario or are we doing something wrong?
Thanks & Regards,
Virinchi.

Hi, I guess it is not a commom scenario. Please try to use the RSDS_DATASOURCE_ACTIVATE_ALL report and monitor the system it the datasource will become inactive again.
Please check also the note 1077655 which explains similar behavior.
1077655 - DataSource is inactive when loaded (or after replication).
Thanks,
Walter Oliveira.

Similar Messages

Support pack Issue

Dears,
I am facing one issue in applying Support package.
I am getting error :
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
While In SPAM status is:
No queue has been define
SPAM status:green
In SAINT also there is no pending Support Pack.
Tried several times but same result.
Deepak.

hi deepak
try to reset the status of spam by
Run tcode SE37 (Functional module)
Program SPAM_RESET_STATUS
IV_FORCE - X
IV_TOOL - SPAM
IV_WITH_POPUP - X
Execute
retry the same
hope this will solve
Regards
George

Support pack level issue in Standard Finance Program.

Hi Everyone,
                i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
               For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist. Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
              My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
Thanks&Regards,
Siva

Hi Siva,
Your query is obsolutely acceptable...
After supportpack update some times database will not be synchronised with the new updates.
and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
Regards,
Srini

Issue while apply support pack SAP_BASIS SAPKB70013 -18

Hi Gurus,
We have issue while apply support pack to Development system, we have implemented SAPKB70012 pack first and then we have implemented SPAU and saved in Trasport request . while applying other patch SAPKB70013 -18 in one go system asked us to release SPAU transport and then we released that transport after that same transport with auotomatic job it has got implemneted to Quality system and then after that we got below error in quality system :-
The function module "EXTENDED_AUTH_CHECK_FOR_REPS" is called, but
cannot be found in its function group.
Error in the ABAP Application Program
The current ABAP program "SAPLS38E" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Please suggest now both system is not working .
Regards,
Jeetendra

Also you can check object modifications in transaction SE03 looking for request that touched object SAPLS38E.
Could you please share the syntax error message ?
Best regards

Issues with POWL action buttons and row selection after Support Packs

We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt). In fact all of the POWL lists that we are using are behaving the same way. There are 2 changes that have happened after moving to this stack.
1. In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
2. All of the Action Buttons in the POWL lists are disabled.
I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
I've checked a side-effects report from OSS and have come up empty handed. Has anyone else run into this?
Eric

I have found an OSS note that addresses this problem. This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0. The OSS note is 1363334. Question Answered.

SB Audigy Series Support Pack 5.3 (02/24/2015)

This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.

Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio.

SB Audigy Series Support Pack 3.1 (OUTDATED)

<p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
<p align="center">[color="#ff0000"]Use it at your own risk.
Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
?Vista?SP2 / XP SP3
Included in the pack:?
- Audigy series driver 2.8.00.8 (latest beta)
- ALchemy .30.00
- Audio Console .32.02
- DDL and DTS Connect License Activation 2.00.03 (*)
- Dolby Digital Li've Pack 3.00.03 (*)
- DTS Connect Pack .03.04 (*)
- EAX Console 3.00.56 (Windows XP only)
- Graphic Equalizer 2.00.65
- MediaSource DVD-Audio Player 2.00.78
- SoundFont Bank Manager 3.2.00
- Speaker Settings 2.00.60
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
[img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
Fixes and improvements:
- Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
- Fixes the enhancements errors in Windows?mixer and Windows Media Player.
- Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
- Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
- Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
- Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
- Workarounds a bug that?unexpectedly resets the?speaker configuration.
- Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
- Implements Hardware CMSS Headphone by using a workaround.
- Updates all InstallShield setup scripts to support Windows 7.
- Fixes installation INI to properly install applications depending on the detected OS.
- Removes COM workaround for Equalizer, fixed by Creative.
- Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
- Updates shared modules, responsi'veness on certain applications is improved.
- Enables CMSS2 and Stereo Surround.
- Fixes 32-bit ASIO not working on Windows 7 x64.
- Fixes Encoder not available on Windows 7 x64 (related to fix above).
- Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
- Properly adds support for 64-bit OpenAL and 64-bit ASIO.
- Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
Undocumented fixes by Creative (not listed in the release notes):
- Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
- Fixes Equalizer Out of Memory error.
- Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
- Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
- Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
- Restores missing Microphone option in Surround Mixer (documented).
- Fixes Microphone mute, volume and +20db boost controls.
[size="3" color="#000000">?
[size="3" color="#000000">Release Notes:
Windows Security warning during driver installation
When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
OpenAL 2D benchmark in RightMark 3DSound crashes your system
Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
6. Speakers?incorrectly available on Windows 7 64-bit (x64)
Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
Do not choose that mode as it causes sync issues with Windows mixer.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows 7 / Vista / XP
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows 7 / Vista (requires Service Pack )
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Advanced EQ and Special FX not available on Windows 7 / Vista
These presets don't work on Windows 7 / Vista.
There is no sound in games with OpenAL support on Windows XP
Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
Equalizer settings are lost
When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are reset when speaker configuration is changed
Bass and treble settings are reset when speaker configuration is changed.
DTS Encoder Switcher
The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
Thoroughly read the ReadMe.txt file included before using the provided?utilities.
Hardware CMSS Headphone
To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
Playback Devices -> Speaker Properties
Now check the Speaker configuration in "Playback devices".
If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
Microsoft Audio Home Theater Effects
This driver adds the following audio effects, which are available depending on the current speaker configuration:
- Bass Management
- Speaker Fill
- Room Correction
- Loudness Equalization
- Bass Boost
- Virtual Surround
- Low Frequency Protection
Some effects are also available for the "SPDIF Out" device.
Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
Windows MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
Download:
New version available here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
All files are property of Creative Technology Ltd, unless otherwise noted.

IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
blunden wrote:
EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
http://www.mediafire.com/download.php?rjmznqa2oy
Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
Fixes an issue that prevents Speaker Fill from working.
There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

Latest Front-End Support pack - Report Designer

Hi,
We are having some formating related issues in Report Designer in some of the Finance reports. I believe this is because of missing latest Support Packs or Patches front end.... for example, in report designer we unable to see the settings in the property window (on left) to display column headings on each page.
We are on front-end pack: BI Add-on 7.10, Support Pack 5, Revision 529.
Back-end: Support Pack 16.
Is this the latest one (for Front-end)?
If not, can you please let me know what is the latest support pack/patches available?
Thanks.
Samay
Edited by: Samay Mehta on Jun 11, 2008 10:28 PM

service.sap.com/swdc
Support packages and patches>Entry by application group>
Support Packages and Patches"> SAP Frontend Components"> SAP GUI FOR WINDOWS" >SAP GUI FOR WINDOWS 6.40>win32
also check
Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
hope this helps.
In general, the frontend patches are released at the same time as backend patches...
Therefore,usually
FEP9 is released with SPS9.
FEP10 is released with SPS10.
FEP11 is released with SPS11
FEP16 is released with SPS16
Hope it Helps
Chetan
@CP..

Short dumps in every transaction during the Support pack import

I am in the middle of applying support packs SP12 on NetWeaver 7.0. In SPAM, during the import, I received short dumps. I get short dump for all transactions i excute now. I am unable to go to SPAM to continue the SPAM, all I get short dumps. This is our new training system that we are building. I had same issues before, and I got help from SAP for this issue, where they suggested tp command wiht lots of options to run at the OS level. Since I moved company I am not able access the same ticket. Do anyone of you guys know the OS tp command to continue the SPAM import phase?
Please and thanks
Kumar

Hi,
SAP does not recommend to run SP's at OS level. Most of time when u r running SAP_BASIS , u will receive ABAP dumps. then option is to run SP at using tp command & you have to analyze many things before running this command.
<removed_by_moderator>
Please read the Rules of Engagement
Edited by: Juan Reyes on Jul 28, 2008 10:12 AM

ESS benefits and payment not displaying after support pack update

Hi All,
After the latest HR support pack update ESS benefits and payment not displaying
SAP ECC 604 EPH5
SAP_ABA 702
SAP Kernel : 720_EXT_REL
Kernel Patch number : 439
Netweaver portal version - 7.30
please help
Regards
Rahul

Hi Siddharth & Jwala,
the issue got fixed, by changing the order of Payment above the Benefits
1. i made some options to be disabled & enabled in both benefits and payment
2. Then in the portal i could see the benefits and payment
3. inside the benefits & payment i was able to see two option 1 is for benefits & other is for payment
4. we only wanted payment functionality to be displaying
5. so i tried to hide the benefits then noting was getting displayed in the portal
6. finally i changed the order of the payment just above the benefits
then then i was able to see the benefits and payment inside that i was able to see the payment where i was able to see the payslip
i am not sure what i have done but i is working but please let me know what the problem was actually
Regards
Rahul

CRM support pack queries

Hello Support,
I have CRM 2005 in my landscape.It has the following patch level.
for ABAP stack it is at Stack 8
for JAVA stak it is at Stack 4.
And we are going for both (ABAP and JAVA) to STACK 15 which is latest.
I have the following query
1.) Can i directlly upgrade the JAVA stack from 4 to 15. Since i guess the present stack is too low.
Will we face any issue in doing so. What is the general practise?.
2.) For the ABAP stack , can i put the whole stack from 9 to 15 in the queue at a time or do one stack at a time.
Example
first upgrade it to 9 then 10 and so on
or directly in one queue to 15, so that we can have only one SPDD and SPAU.
3.) what is the main SNOTE for the CRM support pack.
4.) What all pre-requisite are ther perticulary for the CRM support packs.
Regards
Anthony

Hi mohit ,
Thanks for the reply ..
Yes , i will try convicing the client for going to latest -1 patches.
Now you have suggest that we must go for the ABAP to first SP12 and then to the latest -1.
I have the following query regarding this.
1.) How should i go to SP12 stack.
a.) by directly adding all the stacks till 12 in one go. (that is starting the queue from stack 8 to 12 ).
b.) going one stack at a time (i.e first will bring it to stack 9 then 10 then 11 and then 12)
c.) going component wise ( eg , first the BASIS till 12 , then the ABAP , then BW and so on.)
Regards
Anthony

Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (s

Hi,
We are moving into the SAP ECC enviroment and need to understand the difference between the 2 Support Packs Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (support pack SAPK-60403INEAAPPL).
Can anyone give us an indication in terms of functionality what we should be looking out for? During the testing we already came across and issue regarding double invoicing but this was fixed with a OSS note.
From a coding, functionality, intergration and process perspective,how do we know what the differences are? Is there a document that lists these difference as a quick comparison between the two releases.
Thanks in advance

Hi,
There is lot of difference btween 2. ECC System with EHP4 (Release 604 Level 3), ECC package will be on 604 release and level represents the support pack level of 604 release. If your system is on this level then it means that your system is with Enhancement packages but if your ECC components are on release 600 then it is without Enhancement packages.
Enhancement packages has been delivered a lot of new things like New GL etc. More information for what extra features ECC 6.0 with EHP4 has: can be checked on http://service.sap.com/erp-ehp.
To take your system from 600 release to 604 release requires a lot of effort because you have to upgrade your system to bring at this release.
Thanks
Sunny

JEE WebSphere Management Pack: Issue with 8.5.5 Discovery

Is WebSphere Application Server 8.5.5 supported as a discoverable JEE Application Server within System Center Operations Manager 2012 R2? We have tried just about everything at this point....
Currently Running JEE IBM WebSphere 8 Application Server MP version 7.3.2135.0
Agent Running as Proxy
RunAs account created and bound to server
BeanSpy deployed and functioning via query.
Universal Discovery used with no success. (NewJ2EEAppServer.ps1 does not except version 8 of WebSphere).
Any help would be appreciated

Hi Deem13,
Please look at these posts:
http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d15bc060-a071-4063-bf5d-c4ec9f0d8cbb/jee-websphere-management-pack-issue-with-discovery?forum=operationsmanagermgmtpacks
http://blogs.inframon.com/post/2012/04/27/WebSphere-monitoring-with-the-JEE-Application-Performance-Monitoring-management-packs.aspx
Natalya

Support Pack Status not updated in System Component Information

Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
Suhail

For future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support

Support Pack Level Upgrade in BI 7.0

Hi all,
Can anyone let me know what are the possible issues that would occur after upgrading support pack level in BI 7.0.
As far as I know a BI consultant would participate in the upgrade activities like BI objects check, SPAU, query check, etc. Can anyone let me know if there are are any other activities to be performed.
I would appreciate your help.
Thanks,
Sunny.

Hi
There is any customer specific development done by SAP in the previous system. If so, the time to act is just after the pre upgrade study only. The customer would only want to retain the customer specific module developed by SAP. We need to get SAPu2019s intervention in the project before we start the upgrade. SAP would develop certain patches to be run on the previous system to capture all the customer specific development and then they would run some patches on ECC system u2013 this would release the customer specific development in the new system (ECC./BI). This is a very crucial and important check of the step. If not taken care of at the proper time, it might hamper the Customer Specific development on the new system.
It is to be assured that the new system is at the latest stack level for ABAP, XI, BI etc before we start the SPDD and SPAU phase
Only one request is to be made for SPDD. For SPAU too, only one request should be made.
Previous system sandbox should be available for reference during the entire upgrade project and should not be scrapped before the Go Live.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304b9de6-f84f-2b10-94af-e5ff7461c18c
http://www.thespot4sap.com/upgrade_guide_v2.pdf
Hope it helps.

Support pack issues

Similar Messages

Maybe you are looking for