Support pack not importing
Dear Team,
When I am running Support pack SAPKB70010.
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
Error in phase: IMPORT_PROPER
Reason for error: TP_CANNOT_CONNECT_SYSTEM
Return code: 0212
Error message: could not access file as supposed (see dev_tp or
SLOG1025.R3P for more de
I have check my STMS is proper configure.
When I check System Log in /usr/sap/trans/log/
START imp all R3P 20100621070516 DDIC testserver 20100621070516
INFO: event SAP_IMPORT_START triggered successfully
START tp_getprots R3P S 20100621070517 DDIC testserver 20100621070516
STOP imp all R3P 7006 20100621213330 DDIC testserver 20100621070516
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START imp all R3P 20100621224459 DDIC testserver 20100621224458
INFO: event SAP_IMPORT_START triggered successfully
START tp_getprots R3P S 20100621224500 DDIC testserver 20100621224458
How I do this one
Regards
how about reading your error message completely?
Error message: could not access file as supposed (see dev_tp or SLOG1025.R3P for more
Similar Messages
-
HR support packs not available in Service Market Place
Dear SAP,
We are planning to upload SAP_HR Support Pack till the level SAPKE50076
We are currently in level SAPKE50063. We need to go till the level 76
as we req to implement snote 1474958 and all its prerequisites the note
number 1474958 is mentioned as in support pack SAPKE50075.
But while we try to download it from Service Market place and search
for the support packs of HR for SAPKE500* we are able to get the last
search as SAPKE50071. We need to get 72,73,74,75,76 as well.
Please suggest what needs to be done as we need to critically implement
the HR Support packs for some HR Process.
- Jitesh
( SAP Basis )Hi Jitesh,
When I checked in the market place I could see patches upto 81 for SAP HR 5.0 and they are very much available. Once you search the patches goto page 7
Let me know if you need any help.
Regards,
SBK -
T430 SCCM driver pack not importing
I got the T430 driver pack and while I am importing it gives me an error.
Error: Some driver package(s) are updated successfully. But some are not.
Errors
Lenovo T430 x86 - The ConfigMgr Provider reported an error.
Error: Some driver package(s) are updated on distribution points successfully. But some are not.
Any ideas?
Thanks,
JasonCould be related to this Microsoft KB article / hotfix:
http://support.microsoft.com/kb/978754
At least some network drivers require that hotfix to be installed. The driver pack itself works fine, just imported it a couple of days ago into one SCCM 2007 SP2 system. -
Support pack SAPKB70014 stuck at ddic activation
Hi!
While upgrading Support Pack SAPKB70014, import stuck at phase DDIC_ACTIVATION, reason for error is TP_STEP_FAILURE, the return code is 0012 and the error message: OCS Package SAPKB70014, tp step A, return code 0012.
I can see in the log of the import queue that the job RDDMASGL was terminated and I found the entry "ABAP / 4 processor: EXSORT_NOT_ENOUGH_MEMORY" in the log of that job.
In SAP memory analysis (transaction st02) I can see that maximal 285 MB heap memory were used while 2 GB are possible. During installation of the support pack always 8 GB of physical memory were free in the OS. The SAP system is running under Windows 2003 R2 Enterprise Edition SP2 with 12 GB of physical memory.
What's the reason for this and what can I do?
Thanks in advance!
Nico WallmeierHi
Please help
I am new in Basis my system has 4GB Ram running windows system 32. To what value should I set my memory parameters. -
Support Pack upgrade error in Import Phase
Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
| ######################################
Thanks and Regards,
Sankar
SAP BASIS ConsultantHi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
The function module "POSS_UIREQ_OPT_SUBMIT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant -
Short dump in every transaction during support pack import - Solution Mgr
I am in the middle of applying support packs SP13 and SP14 for Solution Manager. In SPAM, during the import, I received short dumps. I get short dump for all transactions. The error message is 'Syntax error in program "SAPLWB_CUSTOMIZING", Field "G_DC_TABSTR" is unknown in INCLUDE LWB_CUSTOMIZINGDEV'.
Please help. Thanks !Hi
My first question, would be, why are you performing other activities while importing patches?
This is not recommended.
Rahul -
Error importing support pack SAPKH60011 (SAP_APPL)
Dear All,
I am faceing one error when applying support pack SAPKH60011 can not apply showing error " The import was stopped since an error occurred during tha phase IMPORT _PROPER ....". for details i here attached screenshot .
Pls. reply ,
Thanks and regards,
MayurHi Mayur,
You need to check the latest alog, ulog and slog.
Check the main import log SAPI<package name> which should be in usr/sap/trans/log
This will cotnain details of why the import failed.
It it failed due to a deadlock occuring which can occur if someone is using the system while import is occuring, you should restart the database to clear any locks before attmpting the import again.
Another cause of failure during import can be the use of out of date transport tools. Please ensure you are using the latest tp and R3trans available for your release from the service marketplace.
Are you still able to access the system and repeat the import via SPAM?
If every transaction is resulting in a dump and Syntax errors, then please open a message with SAP and provide the alog, ulog and slog along with the main import log and screenshots of the results of
tp showbuffer <sid> pf=<path to transport profile> tag=SPAM
and screenshots of the contents of usr/sap/trans/tmp
for further analysis. Also, please do NOT make any manual commands or changes to the buffer or it can make the situation worse.
Ensure if the import has failed, that the related SAPKK<package name> is renamed / moved from usr/sap/trans/tmp if it is still there from the failed import attempt. If they are still there when you try a new import, the slog will filll with entries of
warning file ...... is already in use, waiting 30 seconds
and the import will not progress.
These files will be created once the new import is started.
When repeating the import, please monitor the SLOG entries and see that usr/sap/trans/log and usr/sap/trans/tmp are being updated regularly, this will allow you to see the progress of the import.
Please update with the contents of SAPI...... if the import still fails.
Best regards,
Paul -
Short dumps in every transaction during the Support pack import
I am in the middle of applying support packs SP12 on NetWeaver 7.0. In SPAM, during the import, I received short dumps. I get short dump for all transactions i excute now. I am unable to go to SPAM to continue the SPAM, all I get short dumps. This is our new training system that we are building. I had same issues before, and I got help from SAP for this issue, where they suggested tp command wiht lots of options to run at the OS level. Since I moved company I am not able access the same ticket. Do anyone of you guys know the OS tp command to continue the SPAM import phase?
Please and thanks
KumarHi,
SAP does not recommend to run SP's at OS level. Most of time when u r running SAP_BASIS , u will receive ABAP dumps. then option is to run SP at using tp command & you have to analyze many things before running this command.
<removed_by_moderator>
Please read the Rules of Engagement
Edited by: Juan Reyes on Jul 28, 2008 10:12 AM -
Support Pack Status not updated in System Component Information
Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
SuhailFor future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support -
Manual Import of Support pack long time
Hi , Gurus,
I am not able to login to sap because of support pack ubnormanl termination , so i am importing manually from the OS level but almost 20 Hrs gone , i am importing it through the TP command , so please help me guys, weather it will be finish or it went to loop???
cheersHi
Check to see if a TP and a R3trans processes are running.
Check in the task Manager i.e tp.exe
check in /usr/sap/trans/tmp for the file. it should grow by small
growths in size.
Check in usr/sap/trans/log for tp details
Check the CPU usage, dont disturb in between, let it carry on.
All the best
Regards
Bhaskar
Edited by: bhaskar1818 on Jul 28, 2008 11:21 AM -
XPRA_EXECUTION error importing ECC 6 support packs
Hi gurus
I am importing some Basis Support packs SAPKB70010-SAPKB70018 for ECC6 .
1.XPRA_EXECUTION
2.I have check sm37 and there is a program RDDEXECL which is failing
Step 001 started (program RDDEXECL, variant , user ID Jamesm)
All DB buffers of application server mmdep01 were synchronized
ABAP/4 processor: ITAB_DUPLICATE_KEY
Job cancelled
3. I have checked in ST22 and got the runtime error:
Runtime Errors ITAB_DUPLICATE_KEY
Date and Time 03.07.2009 00:29:29
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FDT_TRANS_Q================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An entry was to be entered into the table
"\CLASS=CL_FDT_TRANS_Q\METHOD=DETERMIN_MERGE_FROM_Q\DATA=LTS_TRREQUEST_Q"
(which should have
had a unique table key (UNIQUE KEY)).
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"CL_FDT_TRANS_Q================CP" or "CL_FDT_TRANS_Q================CM00A"
"GET_INACTIVE_Q_ENTRIES"
I there a way of fixing this error .
Any ideas are welcomeHi
Check SAP Note 1124173 - FDT Transport: Dump during after import processing
Thanks
Sunny -
How to find out who imported last support packs
Hello
I wander who imported last support packs on the system ILS (SAPKB70014 and SAPKA70014). How to find that out. The transport directory is common for many systemsOne possibility is to check the SLOG*. They can be found in TRANSDIR/log. There will be an SLOGYYWW.SID, where YY is the year (example 09) and WW is the week number (example week 10 of the year). Check the date and time, when the package was imported and then look it up in the SLOG. You will get lines like these:
START imp all SID 20090204132535 USER myhost 20090204132535
And USER is the one you are looking for...
Best regards, Michael -
Hi Everyone,
In release v.5.3 release notes, SAP noted that the logical validation of "not to allow approvers to approve their request" has been added.
Does anyone know if this functionality was included in a Support Pack for v.5.2 version? Or would we have to upgrade to v.5.3 to benefit from this functionality?
Thanks,
Jerri,Jerri-
Since it was considered an enhancement, it was included in the next release, and not as a SP release for v5.2.
Ankur -
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
PI 7.0 Support Pack 16 Release Note
hi
We are starting up with SAP NetWeaver 2004s Support Pack 16 deployment. Our environment is, Windows 2003, MS SQL Server and PI 7.0.
Would appriciate if you help me with release note if any and any helpe/tips around this stack deployment.
Thanks
Sekharcheck this link:
https://websmp208.sap-ag.de/SERVICESMAP
regards.
Maybe you are looking for
-
firefox bookmark toolbar not allowing me to drag & drop website icons. I've gone into view and click on " bookmark toolbar". bookmark toolbar appears but its but its not allowing me to drag and drop the icon on the toolbar. i've tried everything that
-
In iTunes 10.7, some of my podcasts don't transfer to my iPhone.
When I look in iTunes at the podcast list on my phone, the ones that don't transfer have a grey logo beside them (grey circle with two circular white arrows in them.) I don't see any reason why they shouldn't transfer. What's going on? I can d
-
QM Dimonds, What is the better solution differenciate characteristics i have two set of characteristics like Own & customer like if i have moisture characteristic i will create own and customer based on Characteristics search field i maintained
-
Hi, I have following scenario : Queue1 Bpel1 -> Writes Schema A to Queue1 Bpel2 -> Writes Schema B to Queue1 Bpel3 -> Reads from Queue1 I need that Bpel3 should read only Schema A from Queue and not Schema B. So how will i define the correlation betw
-
I hope someone can help me with this because it is driving me bonkers! I have been working on a book in iPhoto for about 6 months now. I am using iPhoto 6, the theme is a 6"X8" and it is Folio. I have entered text and photos and everything looks grea