Support pack SAPKB70014 stuck at ddic activation
Hi!
While upgrading Support Pack SAPKB70014, import stuck at phase DDIC_ACTIVATION, reason for error is TP_STEP_FAILURE, the return code is 0012 and the error message: OCS Package SAPKB70014, tp step A, return code 0012.
I can see in the log of the import queue that the job RDDMASGL was terminated and I found the entry "ABAP / 4 processor: EXSORT_NOT_ENOUGH_MEMORY" in the log of that job.
In SAP memory analysis (transaction st02) I can see that maximal 285 MB heap memory were used while 2 GB are possible. During installation of the support pack always 8 GB of physical memory were free in the OS. The SAP system is running under Windows 2003 R2 Enterprise Edition SP2 with 12 GB of physical memory.
What's the reason for this and what can I do?
Thanks in advance!
Nico Wallmeier
Hi
Please help
I am new in Basis my system has 4GB Ram running windows system 32. To what value should I set my memory parameters.
Similar Messages
-
Ehp1:Solution Manager:Stuck at ddic activation
Hello All,
While upgrading the Solution Manager to Ehp1, import stuck at phase DDIC_ACTIVATION, reason for error is TP_STEP_FAILURE, the return code is 0012 and the error message: OCS Package ******** , tp step A, return code 0012.
I can see in the log of the import queue that the job RDDMASGL was terminated and I found the entry "ABAP / 4 processor: EXSORT_NOT_ENOUGH_MEMORY" in the log of that job.
My system is a 32 bit Windows operation system with 3GB physical Ram.
I have the following doubt
1.) If i keep on re-runing again will the already activated program will be skip or will be re-activated.
2.)How can i resolve this error.
Regards
AnthonyHi
If i keep on re-runing again will the already activated program will be skip or will be re-activated.
It will be skiped and will proceed with rest of the object
How can i resolve this error.
You need to check import logs for better analysis
Rerun the import and see how the things go
Regards
Uday -
SAINT stuck at DDIC activation phase
Hi All
I am doing Virsa Add on installation on CRM production environment.
There were no issues when i did it in development and quality servers
But in production the Saint update hangs in DDIC_Actiation stage.
It does not give any error but goes in an endless loop.
The TP seems to have some issue...but the RDDIMPDP job is running ok
I am not able to get the issue
Plz help
Thanks and regards
TusharHi Tushar,
Please check SLOG and ALOG at OS level.
Also provide the :-
1. Import logs for the queue
2. Action log for the Queue.
3. Tp system log
Regards
Pranay -
DDIC_ACTIVATION Error during application of Support Pack SAPKH47007
Hi All,
We were trying to apply Support Pack SAPKH47007 and it gave us an error in DDIC_Activation Phase and when i checked the logs it gave us this error
Relationship TMFK-TDID for table TTXS does not exist
Check dependent search help S_TMFK_SETTLE
Search help S_TMFK_SETTLE is consistent
I searched and found one Relevant Note for this SAP Note Num : 625098 and it tells us to delete the following fields
Delete the fields FLG_AK_PAYM_FICA and FLG_AK_PAYM_FIAR from the table
I went to SE11 and i dont see this fields there, and even though if i see them i dont think i can delete them coz it is asking Developer Key.
Upon further checking i found that if we delete the Contents in Pat01 and Pat03 we can go ahead and redo the support packs from begining. Can anyone throw some light on this as to how safe is this?
Regards,
Ershad Ahmed.Did you read the note I gave you?
The note says:
Symptom: An error occurs in the DDIC_ACTIVATION phase when you import Support Package SAPKH47007. The DDIC activation log records the following error messages:
Relationship TMFK-TDID for table TTXS does not exist
<...>
Solution: A general solution to the problem is available with R/3 Support Package SAPKH47010. To avoid the error, import the Support Packages SAPKH47007 and SAPKH47010 together in a queue.
If you have already encountered this error, the queue must be reset and extended to include Support Package SAPKH47010. Since you cannot reset the queue from the DDIC_ACTIVATION phase using normal means, this must be done by SAP Support (Component BC-UPG-OCS).
Markus -
ERROR WHILE IMPORTING SUPPORT PACKS
Hi all
After successfull installation of ECC - SERVER , while importing SAP_BASIS support pack , spam stuck with XPRA_EXECUTION phase.
Kindly advice me resove this issue
selvanHi,
Provide Import and Action Logs for the Exact error (SPAM >Goto> import/action logs.
Regards
Umesh -
Stuck during applying support pack SAPKB70012
Hi,
I am stuck with applying a support pack level SAPKB70012 in solution manager during IMPORT_PROPER phase.There is no error message displaying rather than simply showing SPAM red status at the screen.Please suggest me for the next course of action.following is the log TP log.
System Log Entries
START imp single SM4 20081124150722 BASIS MB1ES1012 20081124150721
INFO TBATG CONVERSION OF SM4 N not needed BASIS MB1ES1012 20081124150721
START MOVE NAMETABS SM4 6 20081124150723 BASIS MB1ES1012 20081124150721
START tp_getprots SM4 P 20081124150723 BASIS MB1ES1012 20081124150721
STOP tp_getprots SM4 P 20081124150724 BASIS MB1ES1012 20081124150721
STOP MOVE NAMETABS SM4 6 20081124150724 BASIS MB1ES1012 20081124150721
START MAIN IMPORT SM4 I 20081124150724 BASIS MB1ES1012 20081124150721
WARNING:
MB1ES1012\sapmnt\trans\tmp\SAPKKA70012.SM4 is already in use (10), I'm waiting 4 sec (20081124150752). My name: pid 34692
WARNING:
MB1ES1012\sapmnt\trans\tmp\SAPKKA70012.SM4 is already in use (20), I'm waiting 1 sec (20081124150816). My name: pid 34692
WARNING:
MB1ES1012\sapmnt\trans\tmp\SAPKKA70012.SM4 is already in use (30), I'm waiting 4 sec (20081124150840). My name: pid 34692
WARNING:
MB1ES1012\sapmnt\trans\tmp\SAPKKA70012.SM4 is already in use (40), I'm waiting 2 sec (20081124150911). My name: pid 34692it seems tranport is hung & inconsistant refer the note below ...... u need to manually kill the tranport or kill TP from the OS level and delete *.lob file
As per SAP NOTE 12746 - this is the solution for this - The first line of the semaphore file contains the host name of the computer where the tp that reserved that semaphore file is running. First use operating system means to check whether the corresponding tp is still active - for example, whether the process still exists. If the process no longer exists, you can safely delete the semaphore file.
re-apply the support pack
Hope this will help you
Regards
dEE -
Need to activate Tables during DDIC Activation Phase
Hi Experts,
I am trying to import support packs from SAPKB70009 to SAPKA70011 in a fresh ECC 6.0 IDES Installation. During the DDIC activation phase it got stuck. Request you to please help me with the activation of following tables:
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated
When I checked in SE11, the above tables are already active in state.
I have found one link on forum:
support package error
Tried activating RATE component too, but after saving and trying to activate, got following error message:
TABL YCRM01_S_BUPM was not activated
Check table YCRM01_S_BUPM (BASIS/31.07.10/14:29)
Field RATE: Component type or domain used not active or does not exist
Nametab for table YCRM01_S_BUPM cannot be generated
Check on table YCRM01_S_BUPM resulted in errors
I have noticed that the component RATE is containing Component Type PRP_RATE without any definition for Data Type and description. I believe the missing definition here is the source of not able to activate the table here.
Any suggestions? Please help.
Thanks and Regards,
Naresh.
Edited by: naresh_nmi on Jul 31, 2010 12:22 PMHi,
I created manually PRP_RATE as data element and gone ahead with the imports of Support Package. DDIC activation phase passed through.
Regards,
Naresh. -
SPAM DDIC Activation prob with SAPKB70009
Hi,
Im trying to install service pack 9 for BASIS SAPKB70009 but I keep getting the error DDIC activation. Ive tried everything to remove it as well reloading it over 10 ten times but I still keep getting the error including several reboots.
Is there anyway I can remove this error. If not whats the solution.
Version of patch is CSN0120061532_0024352 I dont think this is the one with problems in it and even it is how do I get it out of the queue.
This is a REAL PAIN!!!
thanks
AmirHi Amir
Please check the following SAP Note:
822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
I hope this helps
Regards
Chen -
ECC Add On ECC-SE Support Pack Hangs
Hi All,
I am aapplying support pack patch 01 on ERP 6.0 EHP 4 system after installating the Add-On ECC SE.
But the Support Pack is hanging for days now. Even restarted the system and restarted the SPAM but that's not helping.
Support Pack is hangign at Phase XPRA_EXECUTION
Checked the import logs and the error there was :
==========================================
Under Method Execution->
Program terminated (job: RDDEXECL, no.: 15381500)
See Job logs
Job Log Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxserver148079 were synchronized
The current transaction was reset
Job also cancelled due to process termination. See the system log
Job cancelled due to system shutdown
Execution of programs after import (XPRA)
End date and time : 20100427100024
Ended with return code: ===> 12 <===
===========================================
But in SPAM the STATUS is not Error Stop or else ..there the stop watch is running and message Execution of Reports After PUT
SLOG
=============
STOP tp_getprots MD1 R 20100427100749 101995 xxxserver48079
STOP EXECUTION OF REPORTS MD1 R 20100427100749 101995 xxxserver148079
START EXECUTION OF REPORTS MD1 R 20100427100957 DDIC xxxserver148079
START tp_getprots MD1 R 20100427100957 DDIC xxxserver148079
===============
Based on this SLOG info i tried SAP note 71353 symptom 2 and checked the status of Active jobs .Only one job is active RDDEXECL
Also tried SAP note 954792 and changed profile parameter rdisp/bufrefmode profile to value sendoff/exeauto ..but that also hasn't helped.
Pls suggest.
Regards
AjayHello Ajay,
What is ECC-SE release. Please note it must be 604 in case of ERP 6.0 EHP4 systems. First let us know what you are tring to install. The error you are facing is generic and doesn't help in understanding the problem!
Regards.
Ruchit Khushu -
Support Pack upgrade error in Import Phase
Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
| ######################################
Thanks and Regards,
Sankar
SAP BASIS ConsultantHi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
The function module "POSS_UIREQ_OPT_SUBMIT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant -
SB Audigy Series Support Pack 5.3 (02/24/2015)
This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio. -
Open data extraction orders - Applying Support Packs
Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NKThe exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests. -
SB Audigy Series Support Pack 3.1 (OUTDATED)
<p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
<p align="center">[color="#ff0000"]Use it at your own risk.
Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
?Vista?SP2 / XP SP3
Included in the pack:?
- Audigy series driver 2.8.00.8 (latest beta)
- ALchemy .30.00
- Audio Console .32.02
- DDL and DTS Connect License Activation 2.00.03 (*)
- Dolby Digital Li've Pack 3.00.03 (*)
- DTS Connect Pack .03.04 (*)
- EAX Console 3.00.56 (Windows XP only)
- Graphic Equalizer 2.00.65
- MediaSource DVD-Audio Player 2.00.78
- SoundFont Bank Manager 3.2.00
- Speaker Settings 2.00.60
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
[img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
Fixes and improvements:
- Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
- Fixes the enhancements errors in Windows?mixer and Windows Media Player.
- Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
- Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
- Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
- Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
- Workarounds a bug that?unexpectedly resets the?speaker configuration.
- Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
- Implements Hardware CMSS Headphone by using a workaround.
- Updates all InstallShield setup scripts to support Windows 7.
- Fixes installation INI to properly install applications depending on the detected OS.
- Removes COM workaround for Equalizer, fixed by Creative.
- Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
- Updates shared modules, responsi'veness on certain applications is improved.
- Enables CMSS2 and Stereo Surround.
- Fixes 32-bit ASIO not working on Windows 7 x64.
- Fixes Encoder not available on Windows 7 x64 (related to fix above).
- Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
- Properly adds support for 64-bit OpenAL and 64-bit ASIO.
- Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
Undocumented fixes by Creative (not listed in the release notes):
- Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
- Fixes Equalizer Out of Memory error.
- Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
- Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
- Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
- Restores missing Microphone option in Surround Mixer (documented).
- Fixes Microphone mute, volume and +20db boost controls.
[size="3" color="#000000">?
[size="3" color="#000000">Release Notes:
Windows Security warning during driver installation
When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
OpenAL 2D benchmark in RightMark 3DSound crashes your system
Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
6. Speakers?incorrectly available on Windows 7 64-bit (x64)
Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
Do not choose that mode as it causes sync issues with Windows mixer.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows 7 / Vista / XP
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows 7 / Vista (requires Service Pack )
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Advanced EQ and Special FX not available on Windows 7 / Vista
These presets don't work on Windows 7 / Vista.
There is no sound in games with OpenAL support on Windows XP
Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
Equalizer settings are lost
When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are reset when speaker configuration is changed
Bass and treble settings are reset when speaker configuration is changed.
DTS Encoder Switcher
The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
Thoroughly read the ReadMe.txt file included before using the provided?utilities.
Hardware CMSS Headphone
To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
Playback Devices -> Speaker Properties
Now check the Speaker configuration in "Playback devices".
If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
Microsoft Audio Home Theater Effects
This driver adds the following audio effects, which are available depending on the current speaker configuration:
- Bass Management
- Speaker Fill
- Room Correction
- Loudness Equalization
- Bass Boost
- Virtual Surround
- Low Frequency Protection
Some effects are also available for the "SPDIF Out" device.
Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
Windows MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
Download:
New version available here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
All files are property of Creative Technology Ltd, unless otherwise noted.IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
blunden wrote:
EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
http://www.mediafire.com/download.php?rjmznqa2oy
Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
Fixes an issue that prevents Speaker Fill from working.
There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall. -
DDIC ACTIVATION error while uploading the patch sapkb70009
hi
when uploading the patch of sap basis in ides , m facing an error of ddic activation and transport error 8 .
pls suggest the reasons after this and help me into it .
Thx & Regards
ShilpaHi Shilpa,
You can refer Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP.
This note describes the problems with SP dependencies , the recommended SP queues etc.
If doesnot help pls provide us the import log
Best Regards
Umesh -
DDIC Activation error during SAP_HR component upgrade in ECC 6.0
Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G
Maybe you are looking for
-
My iTunes says my iPod touch 3rd Gen is up to date with iOs 4.2.1, how do I get the new iOs 5?
-
My site has published successfully, but won't update...
I have uploaded my site successfully a couple of times, but now when I try and update it - it goes through the motions - says it has successfully uploaded - but the changes are not visable - have tried deleting the cache and looking from another mach
-
How to get to learn using TestStand User Interfaces
I am starting to work with TestStand and I was looking into using the User Interface. I know that a couple of examples are provided and that there is a couple of sections of literature on the subject, but there does not appear to be a very helpful (
-
dears, i have installed the ocs r2 infrastractr on linux server and i want to installe the storage tier on windows server. the installation on infrastructer went fine i am able to log 1810, 7777, 7779 ports and to oiddas. when i started the installat
-
BPM User decision Agent assignment
I am working on User decision steps in BPM. I have added Configurable Parameter in Integration Process but after importing it into ID, I am not able to assign any user in parameters. Once I put the value and save/activate, value got cleared out.