Support Package PI_BASIS 2005_1_700

Hi,
I would like to import PI_BASIS 2005_1_700, because this patch is prerequisite
for the following patches.
I unzipped and upload it. It can not import this in the ta saint, because It can not be selected.
This patch will not be displayed.
SAP_ABA     700     0023     SAPKA70023
SAP_BASIS     700     0023     SAPKB70023
PI_BASIS     2006_1_700     0008     SAPKIPYM08
SAP_BW     700             0020     SAPKW70020
SAP_AP     700             0015     SAPKNA7015
SAP_APPL     600     0015     SAPKH60015
SAP_HR     600      0066      SAPKE60066
Can anybody advise me, how i resolve this problem?
Regards,

Hi,
Have you downloaded all the patches from PI_Basis 2005_1_700 including delta upgrade file as well ? Make sure all the patches should be there in the EPS/in and then try.
Thanks
Sunny

Similar Messages

Import Lang. part of support package

Hi all!!!
I tried import language part for support package. In SMLT->Other Tools->Import Language part of support package. choose language. and i see table of supp.packages First position of support package is SAPKINBB9A PI_BASIS 2005_1_700. Where I have get this package

Hi Konstantin
SAPKINBB9A PI_BASIS 2005_1_700 is a SP you need to implement via SPAM
You can download the SP from SAP Marketplace at the software distribution center, just look for SAPKINBB9A.
Regards
Juan
Please reward with points if helfpul

Upgrade from 46c to ECC 6.0 new components support package

dear experts,
we have upgraded our test system from 46C to ECC 6.0
before upgrade in 46C we have support packages components
SAP_BASIS 46C
SAP_ABAP 46C
SAP_APPL 46C
SAP_HR
PI 2003_1_46C
SAP_NOTES 46C
ST-A/PI 01B_R3_46C
ST-PI 2005_1_46C
after upgrade to ECC 6.0 we found
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_BW 700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
EA-IPPE 400 0003
EA-HR 600 0003
EA-GLTRADE 600 0003
EA-PS 600 0003
EA-RETAIL 600 0003
EA-FINSERV 600 0003
EA-DFPS 600 0003
EA-APPL 600 0003
FINBASIS 600 0003
ECC-DIMP 600 0003
ERECRUIT 600 0003
FI-CA 600 0003
FI-CAX 600 0003
INSURANCE 600 0003
IS-CWM 600 0003
IS-H 600 0003
IS-M 600 0003
IS-OIL 600 0003
IS-PS-CA 600 0003
IS-UT 600 0003
LSOFE 600 0003
SEM-BW 600 0003
we are planning to apply SPS 06. Is it mandatory we have to apply
all the support packages in SPS 06.
we are confused as we dont use IS-OIL,EA-,ERECUIT,INSURANCE,FI-
please suggest which support packages we have apply relating to the
functionality we have in 46C
regards
Raghu

Hi,
you have to apply the same type of packages as before.
All other are included in ECC, but if you don't use the special services and applications (for example IS Oil or stuff like this), there is no need to apply all these packages.
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
should be enough
Regards
Timm

Support Package in CRM

Hi Experts,
Iam working on some CRM datasource. I would like to know what teh Current support package is intalled in the CRM System.. can anyone explain the steps to view the current support package installed in the system please.
Thanks,
DV

hi Dave,
PI_BASIS, you will see e.g 2005_1_700, means PI 2005.1
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/ad5d044ebc11d182bf0000e829fbfe/frameset.htm
Software Component Name
SAP_APPL APPL Support Package
SAP_BASIS Basis Support Package
SAP_ABA Application Interface Support Package
SAP_HR HR Support Package
SAP_BW BW Support Package
BBPCRM BBP/EBP and CRM Support Package
hope this helps.

Support Package error

Hi Experts,
Currently i am installing suppport package for PI 7.10.
SP : SAP_BASIS.
Just newly installed the sap system -> after kernel upgrade, i applied latest SPAM verion - 27.
NowBusiness package SAP -basis is in the process. I started the package three hours back. still is in the process. i chcked the log files /usr/sap/trans/tmp/SAPIB71006.<SID>
====================================================================     ).
4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBBA864FE336A2EB85J*
4 ETW690 COMMIT "0" "1008778130"
4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85E*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85D*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW690 COMMIT "0" "1008778130"
4 ETW000   0 entries for SOTR_HEAD imported (00127991401D1DEBB0E8673749278B85*).
4 ETW690 COMMIT "0" "1008778130"
4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBB0E8673749278B85J*
4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBB0E8673749278B85J*
4 ETW690 COMMIT "0" "1008778130"
=====================================================================
Observed that error says `entry for SOTR_TEXT rejected - language not installed`
I have not installed the language import till now. I am wondering that that could be an issue.
My logs are keep updating. symptom tells than till import is in the progress.
Could someone reply, Does the Language import must for Support package installation ?.
Now Spam screen says that `Main import ` on the screen.
Thanks
Thirumal

Hi Vani,
Thank you very much,
SAP_Basis package has been successfully completed. As u said language import not required to update support packages.
It took me around 7 hours to complete the update.Now i have started the Rest of the Business package.
It seems its totally killing my time. I think it shouldnot take this much time to complete a single package I need to install other packages like .
SAP_ABA, PI_Basis,SAP_BW and ST_PI.
Hi Vamshi,
   Thank you. Finally package completed.
Thanks and Regards
Thirumal

Download of ABAP Support Packages for SAP Netweaver PI 7.1

Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.

Solved by SAP Walldorf.

How to find out version, support package, patchlevel of installed j2ee as

Hello all
We have PI 7.11 installed and I'd like to know what the support package and patchlevel of our installed j2ee application server is. We would like to post-install NWDI and need to know which are the right SCA-Files for us to download.
Can anyone tell me where to find this information? I wasn't able to find it (maybe just didn't see it?)
Thanks in advance
Renaud

Thanks Srikanth for your quick reply
But which "help -> about" are you talking about?
nwa? ConfigTool? Management Console? JSPM? SAPGUI Client? Elsewhere?
From SAPGUI-Client I choose System -> Status and click on details button for SAP System data. Here I see:
SAP_ABA     711     0000
SAP_BASIS     711     0000
PI_BASIS     711     0000
ST-PI     2005_1_710     0003
SAP_BW     711     0000
But this is for ABAP stack only.
In nwa I don't see any HELP -> About
In nwa/sysinfo I don't see any HELP -> About
In Config Tool I can see:
Version: 7.1100.20081120163102.0000
-> is this the j2ee as version including support package and patchlevel info or is this the version of the config tool itself?
In JSPM / SDT in Help -> About I can see:
Client Version 1.4.0
Server Version 1.4.0
Server Port 50418
JSPM Service Version 1.0
JSPM Host Name localhost
JSPM Port 50417
Unfortunately not what I'm searching for as well.
In SAP Management Console in ? -> About I can see:
Version: 7110, 21, 15, 51094
Still not sure where to find the required infos... any other ideas?
Kind regards
Renaud

What are the components & support package levels required in 4.7 to extract

Hi All,
In my landscape we have ECC 6.0 and 4.7EE, as of now we are extracting data from ECC 6.0 to BI 7.0.Now we have requirement to extract data from 4.7EE.
Could you please suggest me what are the components & support package levels required in 4.7 to extract data from BI 7.0
i am copying current compnents and support package level below
SAP_BASIS            620        | 0065 | SAPKB62065           | SAP Basis Component                                         |
SAP_ABA              620        | 0065 | SAPKA62065           | Cross-Application Component                                 |
SAP_APPL             470        | 0025 | SAPKH47025           | Logistics and Accounting                                    |
SAP_HR                 470        | 0113 | SAPKE470B3           | Human Resources
ABA_PLUS            | 100        | 0009 | SAPKGPBA09           | PLUGIN ZU ABA_PLUS                                          |
EA-IPPE                  200        | 0013 | SAPKGPIB13           | EA-IPPE 200 : Add-On Installation                           |
PI                   | 2004_1_470 | 0001 | SAPKIPZI51           | R/3 Plug-In (PI) 2004.1 for R/3 Enterpri                    |
PI_BASIS             | 2004_1_620 | 0003 | SAPKIPYI53           | Basis Plug-In (PI_BASIS) 2004_1_620                         |
ST-PI                | 2008_1_620 | 0000 |      -               | SAP Solution Tools Plug-In                                  |
EA-APPL              | 200        | 0007 | SAPKGPAB07           | SAP R/3 Enterprise PLM, SCM, Financials                     |
EA-DFPS              | 200        | 0007 | SAPKGPDB07           | SAP R/3 ENTERPRISE DFPS                                     |
EA-FINSERV           | 200        | 0007 | SAPKGPFB07           | SAP R/3 Enterprise Financial Services                       |
EA-GLTRADE           | 200        | 0007 | SAPKGPGB07           | SAP R/3 Enterprise Global Trade                             |
EA-HR                | 200        | 0011 | SAPKGPHB11           | SAP R/3 Enterprise HR Extension                             |
EA-PS                | 200        | 0007 | SAPKGPPB07           | SAP R/3 Enterprise Public Services                          |
EA-RETAIL            | 200        | 0007 | SAPKGPRB07           | SAP R/3 Enterprise Retail
Thanks & regards
Mani.
Edited by: manohar kumar on Nov 18, 2010 7:36 AM

Hi,
As far as my view there is no such dependancy as our customers are running in same Environemnt (R/3 4.7 EE and BI 7.0) .
Are you facing any problem durng extraction or its just a proactive approarch .
I hope extraction will work with your current landscape.
Regards,

How to find and apply new Support Packages?

Hi to everyone.
The system is SAP R/3 Enterprise (may 4.7 ext2?)
The spam version is 6.20/0020
i have to update the support packages, so i went on https://websmp107.sap-ag.de/swdc, but i dont know what SP i have to download.
the situation is (so i have to update all of them?):
SAP_BASIS     620     0059     SAPKB62059
SAP_ABA     620     0058     SAPKA62058
SAP_APPL     470     0018     SAPKH47018
SAP_HR     470     0058     SAPKE47058
EA-IPPE     200     0004     SAPKGPIB04     .
PI     2003_1_470     0002     SAPKIPZH52
PI_BASIS     2003_1_620     0002     SAPKIPYH52
ST-PI     2005_1_620     0002     SAPKITLQG2
EA-HR     200     0015     SAPKGPHB15
LSO     200     0018     SAPK-200PIINLSO

For eg. for 4.6C you have upto 52 in BASIS ,ABAP,and cross application components.
you download 43..44..52 and using SPAM you can upload from front end or you can uncar them on the App.server.
However, during the course of implementing patches, during the SPDD and SPAU phase system gives the option to retain the changes that are made to standard programs / objects / tables etc or to reset the objects to SAP standard objects. It is during these changes only that the functional consultant has to study the program/changes which are done and the impact of the changes.So when you come through this SPDD or SPAU phase you have to make sure from your ABAPers and functional consultants regarding whether to reset all to original or retain the changes.This is crucial otherwise you will impair your business unknowingly.
Click on the info button beside the support pack name and see the dependencies.
The order of applying patches will be BASIS,ABAP,Cross application components,HR etc...
And finally it's not the case that we should go for applying a support pack because it's available at SAP market place.

Support package upgrade / SPAU with multiple queues

Hello, We are upgrading our support package level on our ECC 6.0 system. I divided up the support packages into 4 different queues:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
SAP_BW
SAP_AP
SAP-HR
After importing each queue, I had a few things to do in SPDD and SPAU. I created a new SPDD or SPAU transport request for each queue. My question is now what is the recommended procedure to handle these SPAU/SPDD transport requests when you have multiple queues? I plan to define the same queues when doing QA and PRD. Do I mark all of the requests and then when I do each queue, I only specify that particular request? Thank you in advance for your help.
Best regards,
Russ Cook

Hi Russ,
when did you export the different SPAU requests or didn't you export them at all?
If the export happens only after all queues are already imported, this final system state (component version + SP level) is stored in the requests.You are then not able to include e.g. the request for the SAP_BASIS SPs into the SAP_BASIS queue, because the other components are still on the old version, while according to the request they should be on the newer state.
So, the right procedure would be; import the SP queue, do the modification adjustment for this queue, mark the workbench request as modification adjustment transport request and export this request. Then you can import the next SP queue.
Best regards,
Dirk

Support package update error

Dear all,
I am currently update my system.
The current version is ECC6 EHP7 based on NW7.4
SAP_BASIS 740 0002
SAP_ABA 740 0002
I would like to upgrade to SPS level 5
We use DB2 LUW 10.5
In the update phase, we encountered an error message:
SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
As I can see in the log file, error messages are as below
===========================
3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
3 ETP399
2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED                " - repeat
2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N A reference to column "SHLPNAME" is ambiguo
2EETP345 us. SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED                "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
3 ETP355Xstatements:
3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
3 ETP399 "AS4LOCAL" = 'A'
3 ETP399
2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL               " - repeat
2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL               "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP338XTouch Load of nametabs
===========================
I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
Do you have any idea how to solve this problem? Big thanks!
Best regards,
Fresh man

Hi Ashutosh,
Many thanks for your reply, yes this definitely solve my problem.
But I feel quite confused what's the real reason.
Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
The support packages are totally the same...
is it because I should upgrade from 02 to 05 directly? 04 has problem?
or I should update with SUM instead of SPAM?
or it is because of DB2??
or I should involve other packages like something like ST into the update queue?
Best regards,
Fresh

Import Basis Support Package 7.00 error

Hi All,
I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
- Write down the Support Packages and Add-Ons that have conflicts.
- Leave this screen by choosing 'Cancel' (F12).
- Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
- Define the extended queue again in the Support Package Manager.
- Import the queue. The Support Package Manager executes all steps from
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Conflicts Between Add-On ST 400 and Support Packages
Software Component   Release      Support Package        Information on
                                                         Conflict Resolution
SAP_BASIS            700          SAPKB70009             Include CRT
Can anyone guide me how to proceed.
Thanks,
Sailesh K

Hi Shailesh,
You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
1. Conflict Resolution Transports (CRT)
A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
    P1
    CRT1
    P2
    CRT2
SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
P1
P2
CCRT1
SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
Cheers,
Shyam

Error in the phase IMPORT_PROPER while applying support packages

Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all              SCD        20081229080538              DDIC         sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N      not needed                  DDIC         sealcpro 20081229080537
START tp_getprots          SCD P      20081229080539              DDIC         sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000      db call info
2EETP000 function:   db_setget
2EETP000 fcode:      RT_SETB (65535)
2EETP000 tabname:    TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode:    1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all              SCD   0016 20081229080602              DDIC         sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
Hunky

Dear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky

Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER

Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
Jaturong

Iu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
Are you still getting the same error after you retry the statistics update?

Applying BASIS support package 14 on IDES (DB2 & Windows)

Hi all,
   I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
Short text
    Syntax error in program "SAPLSALC ".
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSALC " in include "LSALCU65
   " in
line 1:
"Function "SALC_INFO_GET_TREE" not found in Function Library."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Can anyone of you help me on this issue.
AWAITING REPLY
Thanks

>    I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
There are a few known issues with KB70014, those are documented in
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Markus

Support Package PI_BASIS 2005_1_700

Similar Messages

Maybe you are looking for