Support packages selection for erp 6.0 ehp4

Hi
We have solution manger ehp1 and upgraded erp 6.0 ready1 to ehp4 . I included the erp system in SMSY soltion manager
I am not able select the erp 6.0 support packages in solution manager still it is connecting to ecc 6.0 support packages
can any body give the solution for selecting the support packages/stacks from solution manager for erp 6.0 ehp4 system.
thanks alot

hi,
I upgraded the solution manger from 7.0 to ehp1 and my ST-400 patch is 21.
I am not getting any error messages .
I upgraded my r/3 system also to ERP 6.0 ehp4.
I am trying to select the support packages through solution manager optimizer i get the screen like
. maintenance
. Enhancement package Installation
if i select maintenace
i can see all the ecc 6.0 support pakages only with sap_basis 700 but i already upgraed to sap_basis 701
i am not able to see ERP 6.0 EHP4 support packages
or if i select Enhanve package installtion also i am getting only asjava support packages but we have only ASABAP only.
please clarify this
thanks alot

Similar Messages

Latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0

Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan Do

Hi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan

Support Package Manger for EBP/CRM cannot confirm SP ???, 'Package unknown'

I am installing CRM 5.0 SR1 (Windows 32bit/Oracle/NW04s).
I have imported SAP_BASIS SP07 and SP08:
'Queue SAPKB70007 - SAPKB70008 imported successfully according to Standard scen.: Confirm this',
but I cannot confirm (Support Package - Confirm is grayed out). If I start Support Package Manager for EBP/CRM SPAM, I get a window: 'Package is unknown'; after continuing I get an exception 'PATCH_NOT_SPECIFIED'. The status window in SPAM shows:
Software Component: ???
SPAM Status: yellow triangle
Next Action: Confirm
Please help.

I ran into this issue. Upgraded spam from 38 to 42. When I go to env-EBp/CRM, the SPAM Package is unknown error came up
Resolution: go to support package -> import spam/saint update again. It tokk care of the issue. Contuniuing with upgrade.

Support Package Manager for EBPCRM

Hi,
In CRM/EBP SAP systems there is used special 'Support Package Manager for EBPCRM' to implement Support Packages instead of standard transactions like SPAM/SAINT.
I'm trying to implement more then one Support Package into the system however this is probably not possible. It seems that it is not possible to create import queue with more then one Support Package? Importing SPs one by one is very time consuming task. SO that's why I'm wondering about this special tool.
Do you have similar functionality?
BR
m./

Hi Jose,
Yes I've put all the SPs into '\usr\sap\trans\Eps\in'. But 'Support Package Manager for EBPCRM' asks me for particular one while I'm going to import it. There is no such an functionality to use queue creation.
BTW: I'm on SAP CRM 4.0 on WIN/MSSQL platform.
BR
m./

Korean Language Support Package required for Reader but not Acrobat?

One of our departments on campus has created a form that is causing some users to get a message prompting them to download the Korean Language Support Package in order to fill in the form fields.
When I originally tested this in Acrobat Pro 9 I didn't get any errors. Another user also reported the issue recently (two this week). So we tested it again, but this time used both Reader 9 and Reader X -- both programs were generating this message to download the language pack. The form appears to be completely in English with no Korean characters. It uses fairly standard fonts and I didn't see any embedding or encoding issues with the fonts.
Aside from having end users download a Korean Language Support Pack to view a PDF that doesn't seem to contain any Korean, are there any other options out there without recreating the form from scratch? Here is a list of the fonts used in the PDF. The only types of encoding are Ansi and Identity-H (which I expanded in the SS above), with the latter fonts being embedded within the PDF.
Any ideas? The form is linked below. Thanks in advance for your replies.
Here is a link to the PDF

SOLVED
While our problems differ, my solution may still be relevant.
My culprit was a rogue font in an embedded Visio drawing. I identified and located the font using the "List text using non-embedded fonts" Preflight analysis in Acrobat 9.4 Pro. I checked the encoding of each non-embedded font and discovered that Arial Unicode MS used Korean font encoding (specifically, KSCms-UHC-H). See screenshot below. Doubleclicking on one of the font properties highlighted the offending text in the pdf.
I went to that location in the source file, which happened to be in the first embedded Visio drawing (shown above). I double clicked the drawing, selected all, and selected Arial font. Then I regenerated the pdf and viewed it in Reader X. The Korean language pack error message did not appear and all Visio drawings displayed normally.
I would recommend using the Acrobat preflight tools to locate text or objects with incorrect font encoding within your PDF or form, then surgically striking (or carpet bombing) the affected location(s) in the source files with embedded/supported fonts.
Hope this helps.
Message was edited by: mugg326

Can't find upgrade master dvd for ERP 6.0 EHP4 !

Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4 (windows/oracle) ? Does anybody knows the right materialnumber?
My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
I looked into download area service.sap.com/swdc:
My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
but there are only upgrade export dvs, language dvd, etc, but NO Upgrade master dvd, too!!!
Kind Regards,
Uta

Dear Ute,
i use this one "Number 51036889"
it is the Upgrade Master from NW701 which is also for EHP4.
Its located under the EHP1 Tree:
Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
hope this helps
Regards
Bjoern

Basic Support packages needed for MSS/ESS?

Hi All,
   What are the basic support packages needed in<b> R/3</b> for ESS and MSS implementation.
Regards,
Pavanmeet.

hi pavneet
the basic support package for ESS and MSS is
1) Download the Business Package for Employee Self Service (mySAP ERP 2004) from SDN using your SAP Service Marketplace ID.
(SDNPortal Content PortfolioBrowse Content PortfolioEvery UserSelf Service--Business Package for Employee Self Service (mySAP ERP 2004) 60.2)
2) Check the J2EE Version and Download the following Web Dynpro Development Components (patches) from service marketplace (Refer SAP Note 761266Self Service Patches to know the version to be downloaded):
     ESS
     PCUI_GP
     (service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004--Entry By ComponentSAP XSS --(SAP ESS 100 and SAP PCUI_GP 100))
1.     ESS <patch number>-10002965.sca (here, ESS11p_2-10002965.sca)
2.     MSS <patch number>-10002964.sca (here, MSS11p_2-10002964.sca)
3.     PCUIGP<patch number>-20000568.sca (here PCUIGP011_0-20000568.sca
i have installed these packages if u have any problem let me know or call me 917 378 8519
please give me the points if it is helpful
thanks
Sandeep Singh

Support package requierement for unicode conversion

We are currently planning a unicode conversion for a SAP 4.7enterprise 1.1 extension version, running under Aix and Oracle, Basis/ABAP SP 35, HR SP20.
According to the conversion guide, we must implement at least Support Pachage 60 for Abap and Basis, no explicit requierement for HR SP level.
I believed that we must applied SAP procedure and exclusively HR Support Package Stack up to 27, which include SP 60 for Basis and Abap and HR 61.
Our HR guys argue there is no indication from SAP that the SUPPORT PACKAGE STACK policy is mandatory and that SAP will provide us with normal support if we run the unicode conversion with SP Basis/ABAP 60, in other word even if we do not respect the support package stack combinaison. Need help on this issue before starting the project

Exterprise 4.7 is Unicode-Compliant,meaning that you can have unicode in 4.7.
If that the case, you should convert to 4.7 Enterprise Ext 2.00 Unicode First.
later only upgrade to ECC 6.0 after 2 years, as you said.
My answer is yes, to your question.
You can download the installation kits at:
http://service.sap.com/swdc
anyway, it is recommended to have the latest SP in your system.
cheers,
Vincent

Issue withe Info Package Selection for the CRM Datasource

Hello,
I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
To Be Noted:
I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
I found something not sure this might be the issue:
1) The Data type is RAW with length 16.
2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
But no Selection option in the Info Package.
Any suggestion and inputs are welcome.
Thanks in advance.
Adhvi.

similar issue is disussed in the below thread...
Info package Selection were hidden
Info Package Selection Language key is not diplaying while this is checked
search for any SAP Note which explains about data type RAW ....

Support Package information for SAP CE 7.2

Hi Expert,
I have done the installation of SAP Netweawer CE 7.2 and the support Package is showing version(1000.7.20.1.0.2009.1110022300 ), but requirement of SAP CE 7.2 with SP1.
This is the Support Package 1 or is a initial shipment then i can download the patches and intall to take SAP
CE 7.2 to SP1.

Hi,
You can post this query under SAP Netweaver > Composition Environment forum.
That forum is dedicated for Composition Environment.
Regards,
Sujit.

Support Package Stack NetWeaver vs. ERP

When I use Maintenance Optimizer to get the latest Support Package Stack (13) from my ERP system (ECC 6.0), it does not get the latest kernel and Basis support packages. After applying, the Early Watch report still shows the kernel is out of date. However, if I go through Service Marketplace and get the latest NetWeaver Stack (16), it gets the latest kernel and Basis package. After applying, Early Watch states that the Kernel is up to date. How should the support package stacks for an ECC 6.0 system be applied - both ERP and NetWeaver stacks or ERP stack only which is not the latest?

Hi,
Its Your requirement, So its better you should opt it for.
Mostly the ecc6 would contain all the components even like sap_hr and others,
but your nw stack doesn't have this.
Also you have to select the kernal like you have to make the appropriate settings in the selection page
which will get you the kernal files in the stack.
Regards,
Vamshi.

Download of ABAP Support Packages for SAP Netweaver PI 7.1

Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.

Solved by SAP Walldorf.

How to import Support Package 13(SAPKW70013) for SAP NetWeaver 2004s BI

Hi,
How to import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013)
Note no for that is : 1019055.
Thanks in Adavance,
Dushyant.

Hi,
RTC for BI 7.0 SAP_BW SP 13 is scheduled in CW 21, that is coming week, after that you should be able to download it from service market place.
@others: Dont get confused about SPS release with SP release. BI has intermediate release which is SP release, SPS is SP-Stack release (which is NetWeaver release).
SP 12 correspond to SPS 12 which is sceduled CW 21.
Hope this helps.
Best Regards,
Rajani

Import Basis Support Package 7.00 error

Hi All,
I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
- Write down the Support Packages and Add-Ons that have conflicts.
- Leave this screen by choosing 'Cancel' (F12).
- Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
- Define the extended queue again in the Support Package Manager.
- Import the queue. The Support Package Manager executes all steps from
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Conflicts Between Add-On ST 400 and Support Packages
Software Component   Release      Support Package        Information on
                                                         Conflict Resolution
SAP_BASIS            700          SAPKB70009             Include CRT
Can anyone guide me how to proceed.
Thanks,
Sailesh K

Hi Shailesh,
You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
1. Conflict Resolution Transports (CRT)
A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
    P1
    CRT1
    P2
    CRT2
SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
P1
P2
CCRT1
SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
Cheers,
Shyam

Sap E-recruiting ERP 6.0 EHP4 SP4

Hi Experts,
I am new to portal , Recently I deployed Business package E-recruiting ERP 6.0 EHP4 SP4 through SDM, it is seen in portal also and i assigned roles to some users, when users access the application i.e clicks on any iview it gives portal runtime error, i think i have to connect that to back end. How can i connect E-recruiting ERP 6.0 EHP4 SP4 to back end server? Is there any RFC's i have to configure? or Whether i have to create any JCO destinations for that like ESS / MSS package? If so what are those JCO destinations? provide some docs and any useful URL's for that.
Provide any URL's or docs regarding pre-deployment and post-deployment guide for E-recruiting ERP 6.0 EHP4 SP4.
Thanks in advance.
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Nov 18, 2010 11:57 AM
Edited by: pradeep_546 on Nov 18, 2010 12:11 PM
Edited by: pradeep_546 on Nov 18, 2010 12:16 PM

Hi,
business package configuration information is available on SAP Help and on service market place:
http://help.sap.com/erp2005_ehp_04/helpdata/en/b0/8af9114b224e4a9fab63ee633ffe1d/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/en/6e/f8b6cbf17541e592bf7bf27cab5b35/frameset.htm
From the portal side, you'll have to create a portal system that points to your SAP backend, assign alias, check if the BP is using ITS, WDA or WDJ and configure the systems.
br,
Tobias

Support packages selection for erp 6.0 ehp4

Similar Messages

Maybe you are looking for